Small Industries Development Corporation Limited has published Tender For Providing Fixing Of Chain Link Fencing To Cover The Land For Development Of Industrial Estate Seer Jagir, Tulbul, Sopore. ( Section - B ). Submission Date for this Tender is 30-10-2023. Wire Fencing Tenders in sopore Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 24-Oct-2023 | Extension | Date | 30-10-2023 |
Sl. No. | Item Description |
1 | Note: Contractor should Quote Rates with all taxes. |
2 | Earth work in excavation by mechanical means over areas ( exceeding 30 cms and upto 1.5 m in width as well as 10 sqm on plan ) including disposal of excavated earth upto 1 mtr. For cutting edge, disposal earth to be leveled and neatly dressed in all kinds of soil. |
3 | Providing and laying of stone soling hand packed under foundations including all leads and lifts complete. |
4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering in 1:4:8 mix ( including water charges). Complete Job |
5 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. Allworks upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and medium tensile steel bars |
7 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering, shuttering, finishing. All works upto Plinth Level 1:3:6 ( 1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size. And including all head loads (including water charges). Complete job. |
8 | Structural steel work in single section, fixed with connecting plate, including cutting, hoisting, fixing in position, making of holes for fixing chain link and with flat iron with nuts and bolts and applying a priming coat of approved steel primer including all carriages from source (Sail, Jindal or Tata) to site of work and materials involved. |
9 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 4 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. |
10 | 12mm thick cement plaster in 1:4 mix ( 1 cement: 4 sand) |
11 | Centring and shuttering including struting, propping etc. and removal of forms for: Foundations, footings, bases of columns etc |
12 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand |
13 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides withrequired EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing,panelling and dash fasteners to be paid for separately.) For fixed portionPowder coated aluminum (minimum thickness of powder coated 50 microns) |
14 | For fixed portionPowder coated aluminum (minimum thickness of powder coated 50 microns) For shutters of doors, windows & ventilators includingproviding and fixing hinges / pivots and making provision for fixing offittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) |
15 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc.complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.)With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) |
16 | Providing and fixing panels of aluminium composite panel cladding in metalic colour of approved shades made out of 4mm thick aluminium composite panel material |
17 | Providing coloured G. S. sheet roofing including vertical /curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick |
18 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 4 mm Hot finished welded type tubes. M.S. Steel pipe of 100mm dia. |
19 | Providing colored ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.0.80 mm thick with zinc coating not less than 275 gram/m2 |
20 | Providing valleys of 90cm wide overall in plain G.S. sheets fixed withpolymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.1.25 mm thick with zinc coating not less than 350 gram/m2 |
21 | Providing and applying Plaster of Paris putty of 2mm thickness overplastered surface to prepare the surface even and smooth complete |
22 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail