}

Testing Of Protective System Of Power Transformer, 11 Kv Switchgear, 33 Kv Control Panels & 33Kv Vcbs Installed At Various 33/11 Kv Sub-Stations, In Administrative Area Of Edd Bkt, Under Work Area Of Etd-Iv, Lesa Transgomti, In Lucknow., Lucknow-Uttar Pradesh

Madhyanchal Vidut Vitran Nigam Limited has published Testing Of Protective System Of Power Transformer, 11 Kv Switchgear, 33 Kv Control Panels & 33Kv Vcbs Installed At Various 33/11 Kv Sub-Stations, In Administrative Area Of Edd Bkt, Under Work Area Of Etd-Iv, Lesa Transgomti, In Lucknow.. Submission Date for this Tender is 16-10-2023. Electrification Work Tenders in Lucknow Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

40177808
Testing Of Protective System Of Power Transformer, 11 Kv Switchgear, 33 Kv Control Panels & 33Kv Vcbs Installed At Various 33/11 Kv Sub-Stations, In Administrative Area Of Edd Bkt, Under Work Area Of Etd-Iv, Lesa Transgomti, In Lucknow.
Open Tender
NCB
Uttar Pradesh
Lucknow
16-10-2023

Tender Details

Testing Of Protective System Of Power Transformer, 11 Kv Switchgear, 33 Kv Control Panels & 33Kv Vcbs Installed At Various 33 / 11 Kv Sub-Stations, In Administrative Area Of Edd Bkt, Under Work Area Of Etd-Iv, Lesa Transgomti, In Lucknow.- 1 Testing Of 11 Kv Vcbs Panel 2 Testing Of CtS With Primary Injection Set Of Its Metering Core And Protection Core At Various Ratios And Current. Testing For Equipment To Earth Megger Value. 3 Testing Of Pt With Three Phase Supply For Ratio And Polarity Check. Insulation Check By 5Kv Megger. 4 Testing Of All Relays Of The Breaker Being Tested For Its Proper Functioning And Tripping Within Set Time And Fault Clearance Timing. 5 Testing Of Mastertrip Relay That It Is Operating In Time From Getting Signal And Operates For Tripping Coil. 6 Testing Of Breaker Operation And Functionality That Each Part Of Breaker ( Gear, Tripping Coil, Plunger, Springs Etc. ) Operates And Break Supply And Measurement Of Total Fault Clearance Time. 7 Providing And Installation Of Tripping Coil / Closing Coil 11Kv Vcb Panel Schneider / Cgl / Stelmec / Pascal Etc Make . 8 Providing And Installation Ofauxilliary / Rotary Switch 11Kv Vcb Panel Schneider / Cgl / Stelmec / Pascal Etc Make . 9 Measurement Of Leakage Current Of Vcb. 10 Testing Of Battery And Battery Charger. 11 Testing Of Earthing Of Vcbs With Earth Resistivity Tester For Earth Results. 12 Testing Of 33 Kv Vcbs. 13 Testing Of 33 Kv Cts, Pts 14 Testing And Functionality Of 33Kv Relays. 15 Overall Testing Of Tripping Mechanism For Local And Remote. 16 Routine Testing Of Power Transformer ( Ratio, Megger, Magnetic Balance, Magnetizing Current, Short Circuit, Temperature Setting And Tripping. Bucholz, Windingresistance, Differential If Operative. 17 Testing Of Earthing Of Transformer Body And Neutral Earthing. 18 Testing Of Transformer Oil Bdv From Nabl Accredieted Lab 19 Emergency Routine Testing Of Power Transformer ( Ratio, Megger, Magnetic Balance, Magnetizing Current, Short Circuit, Temperature Setting And Tripping. Bucholz, Windingresistance, Differential If Operative. 20 Replacement Ofe / F, O / C Relays Works Includes Opening Of Wiring Of Defective Relay And Dismantling From Panel.If Required Making Housing In Existing Panel According To New Relay Size And Fitting In Panel. ( Metal Plate With Colour Code As Existing Panel / Screw Required For Fixing Of New Relay In Panel Will Be Provided By Contractor. ) Making Interconnection And Termination Of Wire With Ferulle And Lug Of Suitable Size According To New Relay. ( Ferulle & Lug Will Be Provided By The Contractor.Relays Will Be Provided By Dept. ) After Replacement Contractor Also Will Have To Do Testing Of Relays And Checking Vcb Tripping By Both E / F, O / C Signal 21 Replacement Of Master Trip Relays Works Includes Opening Of Wiring Of Defective Relay And Dismantling From Panel.If Required Making Housing In Existing Panel According To New Relay Size And Fitting In Panel. ( Metal Plate With Colour Code As Existing Panel / Screw Required For Fixing Of New Relay In Panel Will Be Provided By Contractor. ) Making Interconnection And Termination Of Wire With Ferulle And Lug Of Suitable Size According To New Relay. ( Ferulle & Lug Will Be Provided By The Contractor.Relays Will Be Provided By Dept. ) After Replacement Contractor Also Will Have To Do Testing Of Relays And Checking Vcb Tripping By Both E / F, O / C Signal 22 Opening Of Termination From Both Ends And Dismantling Of Defective / Damage 11Kv Panelct Ofdifferent Ratio.Installation, Commissioningand Testing Of New 11Kv Main Panel Ct Of Different Ratio. 23 Opening Of Termination From Both Ends And Dismantling Of Defective / Damage 11Kv Panelpt. Installation, Commissioningand Testing Of New 11Kv Main Panel Pt. 24 Providing And Installation Of 11Kv Panel Pt Ht Fuse. 25 Providing And Installation Of 33Kv Vcb Panel Schneider / Cgl / Stelmec / Pascal Etc Make Tripping Coil / Closing Coil. 26 Providing And Installation Of 33Kv Vcb Panel Schneider / Cgl / Stelmec / Pascal Etc Make Auxilliary / Rotary Switch. 27 Gst Will Be Paid Extra As Per Rule.

Key Value

Document Fees
INR 3540 /-
EMD
INR 12000.0 /-
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail