Bharat Sanchar Nigam Limited-BSNL has published Tender For Removing And Refixing Of Aluminium Partition For Making Office Cabin Including Painting At First Floor, Cto Building Nagpur. Submission Date for this Tender is 18-10-2023. Painting Tenders in nagpur Maharashtra. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Providing and fixing aluminiumsliding doorbolt ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, withnuts andscrews etc. complete |
| 2 | 250x16mm |
| 3 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete |
| 4 | 250x10 mm |
| 5 | Providing and fixing aluminiumhandles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete |
| 6 | 125mm |
| 7 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer"s specification. |
| 8 | Two or more coats on new work. |
| 9 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 10 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 11 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 12 | For fixed/ shutter portion |
| 13 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 5) |
| 14 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 15 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 16 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. |
| 17 | Pre-laminated particle board with decorative lamination onbothsides. |
| 18 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 19 | One or more coats on old work. |
| 20 | Distempering with 1st quality acrylic washable distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete as per manufacturer"s specification. |
| 21 | One or more coats on old work. |
| 22 | French spirit polish |
| 23 | One or more coats on old work. |
| 24 | Removing of existing aluminium partition / doors / windows including dismembering aluminium partition including dismembering aluminium sections, partical board, glass sheets etc.including stacking of material at any floor etc complete as directed by Engineer-in- charge. |
| 25 | Transportation of surplus goodaluminiumsections,Glass etc fromCTO CompoundtoCivil Division OfficeBuildingCTO compound, Nagpur in a appropriate vehicle, including loading/unloading, stackingetc. complete cost includes every thing nothing extra shall be paid on any account. Due care to be taken to avoid any damages to the material to be transported. If the glass broken or partition materials damanged the cost will be recovered from executing agency) ( Note- Nothing shall be extrapaid on this account) |
| 26 | Refixing of dismantled aluminium partition / door / windows in required size including cutting, grinding etc. of aluminium sections, glass sheets, particle board including necessary screws etc. complete as directed by Engineer-in-charge. |
| 27 | Deduct for unserviceable aluminium section, snap beading etc. . |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
