Water Resources Department-WRD has published Repair Work Repair And Maintenance Oiling Greasing Of 32 No. Canal Gates Of 1 Medium Tank, 6No Minor Irrigation Tank Under Sub-Division Betul And Amla Wrd Dn. Betul. Submission Date for this Tender is 26-10-2023. Mechanical engineering Service Tenders in betul Madhya Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Providing fabrication and fitting work of Stainless steel flat on Embedded parts (on Departmental section, only MS section Given by department) of gates with testing , including cost of all materials( SS flat and welding rods etc.), machinery, tools and tackles, labour, cutting, aligning, welding, finishing, cleaning, applying two coat of cement primer etc., complete as per specifications and approved drawings, including packing & forwarding, transportation charges for structural steel components and other materials. |
2 | Providing Fabrication, machining and assembling of different typesof MS Anchors/MS Anchors /MS chuck nut for Gates assembly, complete as per drawing with testing ,including cost of all materials, applying one coat of zinc rich epoxy primer and two coats of cold applied coal tar epoxy paint with machinery, labour, cutting, aligning, welding, finishing cleaning, etc., complete as per specifications and approved drawings with all lead and lifts, including packing & forwarding charges for structural steel components and other materials. Anchor bolts with two nut and two washers |
3 | Providing Casting machining and assembling of Head stocks assembly with handle complete for operating Tank, canal, barrage, stop dam gates , as per drawing with testing ,including cost of all materials as head stock body, GM Nut, Warm wheel, Gear, Bush ,Pin ,operating handle etc. with machinery, labour, cutting, aligning, welding, finishing, cleaning, painting etc. ,complete as per specifications and approved drawings with all lead and lifts, including packing & forwarding transportation charges for structural steel components and other materials. Head Stock screw jack type 36mm dia. threaded Nut (Model 5-36),0.400 tonne capacity, approx-19.5 kg |
4 | Providing ,fabrication, threading (Square and V threading as required) , machining, straightening of MS Round bar complete as per drawing with testing ,including cost of all materials, with machinery, labour, cutting, aligning, welding, finishing, cleaning, etc., complete as per specifications and approved drawings with all lead and lifts, including packing & forwarding transportation charges for structural steel components and other materials. Rate for single start square threading for 56mm dia./50mmdia /45mm dia. round bar without materials |
5 | Providing ,fabrication, threading (Square and V threading as required) , machining, straightening of MS Round bar complete as per drawing with testing ,including cost of all materials, with machinery, labour, cutting, aligning, welding, finishing, cleaning, etc., complete as per specifications and approved drawings with all lead and lifts, including packing & forwarding transportation charges for structural steel components and other materials. Rate for single start square threading for 36mm dia./32mm dia round bar with materials |
6 | Providing, Fabrication, machining with straightening work of Guide Tee, Track, Sealing frame, Leaf frame or any part of gate"s, complete as per drawing with testing ,including cost of all materials, with machinery, labour, tools and tackles cutting, aligning, welding, finishing, cleaning ,etc., applying one coat of zinc rich epoxy primer and two coats of cold applied coal tar epoxy paint, etc., complete as per specifications and approved drawings with all lead and lifts, including packing & forwarding, transportation charges for structural steel components and other materials. Rate of work with all materials |
7 | Providing of High tensile MS Nut Bolts of Required size and type as per specification with testing, including all lead and lifts, packaging and forwarding charges for all components etc complete |
8 | Providing and applying one coat of Zinc rich epoxy primer paint (zinc content 85%) of approved quality 40 micron dry film thickness to gates/ embedded parts/ hoist components including cost of all materials, labour, removing rust cleaning surface, scaffolding etc. complete. |
9 | Providing and applying two coats of anticorrosive bituminous black paint of approved quality 40 micron dry film thickness each coat to gate components such as horizontal girders/sector and all bracings/ trunion assembly/ yoke girders/ stiffeners/ foot bridge etc. including cost of all materials, labour, removing rust, cleaning surface, scaffolding etc. complete. |
10 | Head Stock Cap |
11 | Gun metal gate operating Nut M-75 Head |
12 | Thrust Bearing with Cone and collar. (b) 16/17 |
13 | Thrust Bearing with Cone and collar. (c)18/20 |
14 | Thrust Bearing with Cone and collar. (d)21/22 |
15 | MS/SS shuter plate pin heavy duty |
16 | MS gate operation key |
17 | Allen Key Bolt |
18 | Oiling and greasing work of gate parts like head stock parts, Roller assembley, Operating Rod,etc. For Gate size upto 1.0mx1.0m |
19 | Oiling and greasing work of gate parts like head stock parts, Roller assembley, Operating Rod,etc. For Gate size above1.0mx1.0m |
20 | GST @ 18% |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail