Tender For Construction Of Weekly Market At Ward No.3, Survey No.3, mettupalayam-Tamil Nadu

Tender For Construction Of Weekly Market At Ward No.3, Survey No.3; 1 Earth Work Excavation For Foundation In Hard Stiff Clay, Stiff Black Cotton, Hard Red Earth, Shales Murram, Gravel, Stoney Earth And Earth Mixed With Small Size Boulders Ss.20B And Sand, Silt Or Other Loose Soil, Wet Sand, Or Silt Not Under Water, Light Black Cotton Soil, Sandy Loam Ordinary Soil And To Full Depth As May Be Directed Except In Hardrockrequiring Blasting Inclusive Of Shoring Shuttering And Baling Out Water And Cleaning And Levelling The Site Etc., Complete 10 Cum ( Data ) 2 Footing 3 Supplying And Filling In Foundation Andbasement With Filling M-Sand In Layers Of Not More Than 15Cm.Thick Well Rammed Watered And Compacted Etc., Complete Complying With Standard Specification. Data 4 Refilling With Excavated Earth In Layers Of 30 Cm Watered Well Rammed And Consolidatred Conforming To Standard Specification Including Labour Charges As Directed By Engineer In Charge 5 Supplying And Filling The Basement With Good Earth Filling In Layers Of Not More Than 15Cmthick Well Rammed Watered And Compacted - Etc., Complete Complying With Standard Specification. 6 Plain Cement Concrete 1:4:8 ( One Cement Four Fine Aggregates And Eight Coarse Aggregates ) Using 40Mm Size Iss Hbg Metal Including Cost And Conveyance Of All Materials To Site And Including For The Mixing, Laying And Labour Charges And All Incidential Charges Such As Water Providing Etc., Complete As Per Standard Specification 7 Supplying And Erecting Steel Centering Including Necessary Supports For Plane Surfaces For Reinforced Cement Concrete Works Such As Column Footings, Column Pedestals, Plinth Beams, Grade Beams, Staircase Steps, Etc. Which Require Only Nominal Strutting Using Mild Steel Sheets Of Size 90Cm X 60Cm And 10 Bg Stiffened With Welded Mild Steel Angles Of Size 25Mm X 25Mm X 3 Mm For Boarding, Laid Over Silver Oakjoists Of Size 10Cm X 6.5Cm Spaced At About 75Cm Centre To Centre Or At Suitable Intervals Etc. Complete In All Floors Complying With Standard Specifcation. ( Payment For Centering Shall Be Given After The Concrete Is Laid ) 8 Supplying And Erecting Centering For Sides And Soffits Including Necessary Supports And Strutting Upto 3.29 M Height For Plane Surfaces As Detailed Below In All Floors With All Cross Bracings Using Mild Steel Sheets Of Size 90 X 60 Cm And 10 Bg Stiffened With Welded Mild Steel Angle Of Size 25Mm X 25Mm X 3 Mm For Boarding Laid Over Silver Oak Joists Of Size 10Cm X 6.50 Cm Spaced At Abote 90 Cm Centre To Centre And Supported By Casurina Props Of 10Cm To 13 Cm Dia Spaced At Not More Than 75 Cm Centre To Centre Etc. Complete Complying With The Standard Specificaiton. ( Payment For Centering Shall Be Given After The Concrete Is Laid ) 9 For Plane Surfaces Such Asrectangular Or Square Rcc Columns, Sunshades, Top And Bottom Slab Of Rcc Boxing, Etc. 10 For Plane Surfaces Such Asrectangular Or Square Rcc Columns, Sunshades, Top And Bottom Slab Of Rcc Boxing, Etc. 11 Providing And Laying In Position Standardised Concrete Mix M-20 Grade In Accordance With Is 456 - 2000 Using 20Mm And Down Graded Hard Broken Granite Stone Jelly For All Rcc Items Of Works With Minimum Cement Contenet Of 325Kg / Cum And Maximum Water Cement Ratio Of 0.55 Including Admixture ( Plasticiser / Super Plasticiser ) In Recommended Proportions As Per Is 9103 To Accelerate, Related Setting Of Concrete, Improve Workability Without Imparing Strength And Durability With About ( 5.0Cum ) , 7730Kg Of 20Mm Machine Crushed Stone Jelly And With About ( 3.3 Cum ) , 5156Kg Of 10 - 12Mm Machine Crushed Stone Jelly And With About ( 4.79Cum ) 7670 Kg Of Sand, But Excluding Cost Of Reinforcement Grill And Fabricating Charges Centering And Shuttering But Including Laying, Vibrating With Mechanical Vibrators, Finishing, Curing, Etc And Providing Fixtures Like Fan Clamps In The Rcc Floor / Roof Slabs Wherever Necessary Without Claiming Extra Cost Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers - The Coarse And Fine Aggregates To Be Used Should Comply With The Requiremnents Of Is Staandards. ( No Separate Payment Will Be Made By The Department For The Excess Usage Of Materials ) 12 M-25 Concrete - Providing And Laying In Position, Standarised Design Mix M-25 Grade Using 20Mm And Down Graded Hard Broken Granite Stone Jelly For All Rcc Items Of Works With Minimum Cement Content Of 350Kg / M3 And Maximum Water Cement Ratio Of 0.55, Including Admixture ( Plasticiser / Super Plasticiser ) In Recommended Proportions As Per Is:9103 To Accelerate, Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability With About ( 5.70 Cu.M. ) 940.50Kg Of 20Mm Machine Crushed Stone Jelly And With About ( 2.80 Cu.M. ) 462.00Kg Of 10-12Mm Machine Crushed Jelly And With About ( 4.25 Cu.M. ) 701.25Kg Of Sand, But Excluding Cost Of Reinforcement Grill And Fabricating Charges, Centering And Shuttering And Also Including Laying, Vibrating With Mechanical Vibrators, Finishing, Curing, Etc And Providing Fixtures Like Fan Clamps In The Rcc Floor / Roof Slabs Wherever Neccessary Without Clambing Extra, Etc. Complete Complying With Standard Specification And As Directed By The Departmental Officers. The Coarse And Fine Aggregates To Be Used Should Comply With The Requierments Of Is 383-2016. ( No Separate Payment Will Be Made By The Department For The Exces Usage Of Materials As Per Design Mix. ) ( Si No 81 ) 13 Foundation 14 Ground Floor 15 Suppling And Fabricating And Placing In Position Ms ( Or ) R.T.S. Bar For Reinforcement To All Rcc Works As Per The Design Given Including Cost Ofsteel And Binding Wire Also In All Floors. 16 Brick Work In Cm 1:5 ( One Cement & Five Sand ) Using Ii Class Ground Moulded Bricks Of Size 9X43 / 8X 2 3 / 4 Including Finishing, Curing, Etc., Complete Complying With Standard Specification. 17 Ground Floor 18 Brick Partition Walls Using Ii Class Ground Moulded Chamber Bricks Of Size 9X43 / 8X 23 / 4In C.M 1:3Using Hoop Iron Reinforcement, If Found Necessary Standard Specification Including Finishing, Curing, Etc., Complete Complying With Standard Specification - 10 Sqm 19 Plain Cement Concrete 1:2:4 ( One Cement, Two Fine Aggregates And Four Coarse Aggregates ) Using 20Mm Size Iss Hbg Metal Including Cost And Conveyance Of All Materials To Site And Including For The Mixing, Laying And Labour Chargesetc., Complete As Per Standard Specification 20 Plastering With Cement Mortar ( 1:5 ) 12Mm , Thick In All Floors Including Cost And Conveyance Of All Materilas To Site And Labour Charges Etc, Complete As Per Standard Specifications ( S.I.306 ) 21 Plastering With Cement Mortar 1:3, 10 Mm , Thick In All Floors Including Cost And Conveyance Of All Materilas To Site And Labour Charges Etc, Complete As Per Standard Specifications ( S.I.306 ) 22 Painting 2 Coats With Approved Cement Paint Over Cement Plastered Wall Surface, Ceiling And Other New Surface And Including Cleaning, Preparing The Surface And Curing Etc., Complete. 23 Finishing The Top Of Floor With Granolithic Finish With Cc 1: 2: 4 ( One Cement, Two Sand & Four Hbg Jelly ) Using Chips Of Grade 10 Mm Andbelow For 25Mm Thickness And Rubbed Smooth Etc, Complete As Per Standard Specification. 24 Paving The Floor With Design Rajasthankotta Tiles ( Colour And Shade As Directed ) Of Size 610 Mm X 610Mm X 20Mm In All Floors Over A Base Layer Of Cement Mortar 1:3 ( One Cement And Three Sand ) 20Mm Thick Laid In-Situ And Pointed With Same Coloured Cement Etc, Complete As Per Standard Specification 25 Supplying And Fixing In Position Cement Basedhydrualically Pressed Anti-Skid Tiles ( Pattern Design ) 20 Mmthick In Cement Mortar 1:3 - 20Mm Thick & Pointedwith Same Colour Of Cement Etc., Complete As Per Standard Specification 26 Dadooing Walls Withglazed Tiles Of Sizes 305Mm X200mm X 6Mm Size Of Approved Make And Quality And Colour L Set In Cement Mortar 1:2 ( One Cement , Two Sand ) Over 10 Mm Base Layer Plastering And Pointing With White Cement Neatly As Directed. 27 Supplying & Fixingdoor Shutters For Mediun Density Fiber Board Of Exterior Grade 35 Mm Thick, Single Leaf Conforming To Is:12406 / 1989 With 35X12 Mm T.W.Lipping On All Edges With Necessary Adhesives And Cp Screws Complying With Standard Specifications. The Rate Is Inclusive Ofthreee Coats Of Best Quality Varnish But Excluding Cost Of Furniture Fittings.Such As 300 Mm Tower Bolt 2Nos, 200Mm Towerbolt I No. 300Mm Aldrop 1 No. Alu Handle Ornamental Type 2 Nos, And 1 No. Door Stopper Etc Complete. 28 Supply And Fixing Of Pvc Solid Doors Using 19Gauge 19Mm Ms Sq, Tubes For Styles And Frames, 15Mm Ms Sq.Tubes For To, Lock And Bottom Rails. The Steel Tubes Shall Be Covered With 5Mm Thick Solid Pvc Sheets. Shutter Using 5Mm Thick Solid Pvc Sheets For Panelling Shall Rigidly Fixed In Positionincluding Furniture And Fittings. The Over All Size Of Styles Shall Be 50Mm X 30Mm. The Over All Size Of Top Rail, Lock Rail And Bottom Rail Shall Be 75Mm X 30Mm. The Over All Size Of Frames Shall Be 50Mm X 45Mm With Suitable Tabate For Housing The Shutter Etc, Complete As Per Standard Specification. Pwd Sor Pg. No. 48 29 Upvc Ventilatorspecification: Supplying And Fixing Upvc ( Un-Plasticized Polyvinyl Chloride ) Louvered Ventilators Of From The Profile The Size Of Outer Frame 60Mm X 58Mm And Shutter Profile Size Of 60 X 78Mm Both Profiles Are Reinforced With Gi / 1Mm 125Gsm And 100% Corrosion Free, The Profile Are Multi Chambered Sections With Wall Thick Of 2Mm. The Epdm Rubber ( Black Colour ) Covered With All Over The Edges Of Frame And Shutter. The Corners And Joints Should Be Welded And Cleaned. Radiations Pin Headed Glass 4Mm Thick Should Be Provided In The Louvers. The Window Should Be Fixed To The Wall With 100% Packing With Screws And Silicon Packing All Round The Frames. The Ventilator Should Be Got Approved From The Executive Engineer Before Use On Work Pwd Sor Pg. No. 66 30 Upvc Windowspecification: Supplying And Fixing Upvc ( Un-Plasticized Polyvinyl Chloride ) Windows Of Casement Type ( Open ) From The Profile The Size Of Outer Frame 60Mm X 58Mm And Shutter Profile Are Reinforcement With Gi / 1Mm 125Gsm And 100% Corrosion Free, The Profiles Are Multi Chambered Sections With Wall Thick Of 2Mm. The Epdm Rubber ( Black Colour ) Covered With Over All The Edges Of Frame And Shutter The Shutter Will Be Provided With Espag Multi Power Point Locks And Also It Operates As Handle. The Corners And Joints Should Be Welded And Cleaned. Radiations Free Pin Headed Plain Or Brown Colour Glass 4Mm Thick Should Be Provided To The Shutter And It Should Not Allow Leakage Of Water Even At Most Ranging Storms And Should Have Key Lockable Action, Security Protective Hinges, Strong Locking Systems And As Per Size For Arresting Noise And Energy Loss. The Connecting Mechanism Between Sash And Outer Frame That Enables Opening Of The Window. The Window Should Be Fixed To The Wall With 100% Packing With Screws And Silicon Packing All Round The Frames. The Window Should Be Got Approved From The Executive Engineer Before Use On Work ( Pwd Sor Pg. No. 65 ) 31 Finishing The Top Of Roof With One Course Of Machine Pressed Tiles Of Size 200 Mm X 200 Mm X 20 Mm Of Approved Quality In Cement Mortar 1:3 ( One Cement Add Three Sand ) 12 Mm Thick Mixed With Water Proofing Compound Conforming To Iss At 2% By Weight Of Cement Used And The Joints Pointed Neatly To Full Depth Of Tiles With The Same Cement Mortar Mixed With Red Oxide And Water Proofing Compound Including Curing Etc., Complete 32 Weathering Course With Concrete Broken Brick ( S.I.No.278 ) & ( P & D ) Data 54.Jelly 20Mm Gauge In Pure Slaked Lime ( No Sand To Be Added ) Over Roof Slab, The Proportion Of Brick Jelly To Lime Being 32 To 12.5 Well Beated With Wooden Beaters For Giving Required Slope And Thickness As Directed By The Departmental Officers Etc., Complete.-10 Cum 33 Manufacturing, Supplying And Fixing Of Stainless Steel Hand Rails For Staircase Near Wet Riser Using 50Mm Dia 304L Grade Stainless Steel Pipe Of 1.60Mm Thick Will Be Provided With Tubular Supports Made Of 304L Grade Stainless Steel Pipe Of 25Mm Dia Of 1.60Mm Thick Welded To The Railing. The Supports Will Be Grouted Into The Wall And Provided With 93.00Mm Thick Stainless Steel Circular Base Plate Of 304 Grade. The Rate Shall Included For Grouting Into Concrete With Necessary Supporting Arrangements The Hand Rail In Floor Polishing Buffing, Bonding, Cutting, Grinding, Conveyance, Welding Charges, Electrical Charges, Etc. Complete ( Pwd Sor P.No :57 ) 34 Supplying, Fabricating, Erecting Structural Steel Work For Roofing Welded Or Bolted Type Using Ms Channels, Angles, Plates And Round Bars Etc. Conforming To Is Specification Including Primer Coating And Enamal Painting As Per Design Given By The Departmental Officers Etc, Complete As Per Standard Specification 35 Supplying And Laying Rubberised Inter Locking Paver Block M40 Grade Providing And Laying Of 83Mm Thick High Strength Type Confirming Is 15658-2006 Of Rubberised Inter Locking Paver Block Insize Of Minimum Compressive Strength Of 40N / Mm2 In Uniform Shape Of Approved Make To Be Laid In Flurring Bone Pattern With Stone Dust Cushion Below The Uniform Shap Of Approvednon Skitting Surface In The Top And The Rate Including Levelling The Base Preparation Ofpavers As Sub Base, Stone Dust Cushion 150Mm Thick Layingout Of Pavement Cut The Pieces To Fix The Edge Vibring The Pavers, Sweeping Tranporting Loading Unloading Of Laying Paver Block As Per Standard Specification, . 36 Providing And Laying, Spreading And Compacting Graded Stone Aggregate To Wet Mix Macadam ( Wmm ) Specification Including Premixing The Material With Water At Omc In Mechanical Mix Plant Carriage To Mixed Material By Tipper To Site Laying In Uniform Layers With Paver In Sub Base / Base Course On Well Prepared Surface And Compacting With Vibratory Roller To Achive The Desired Density Complete As Per Clasue 406 Of Morth Specifications. 37 Fabricating Supplying And Fixing Of Galvalume Colour Sheet Of Size 0.47Mmwith The Following Specification. The Materials Should Be Of Ppgi Tile Profile With A Red Colour Or Any Other Approved Design 0.47 Mm Thick 24 Guage Having Width 1050 Mm. The Sheet Should Be G.I.Base Pre Painted Hot Dipped Galvanized Iron Sheet And To Be Fixed With Shelf Tapping Screws, Plastic Washer.The Washer And Screws To Be Fixed By Using Minute Power Machine Drilled With Out Damaging The Sheets Paint Coating To Be Regular Modified Polyster Coat With Zinc Coating Of Z 120 Gsm Paint Thickness The Finish Should Be Terra Cotta Finish Like Malabar Mangalore Tiles Finish Optional Matt Finish. The Sheet To Be Fixed With Making Suitable Corrugated, Cutting The Sheet In To The Required Ssize And Making Ornamental Designs As Per The Site Condition And As Directed By The Departmental Officers. 38 Providing & Fixing Pvc Rain Water Down Fall Pipe Of The Following Dia With Necessary T.W.Clamps Plugs, Shoes, Bemds, Other Clamps, Screws Nails Etc., Complete Complying With Standard Specification. The Rate Is Inclusive Of Cost Of Removable Iron Gratings Of Appropriate Size. The Size Of Teak Wood Plugs Used Is 150X25mm In Front & 200X75mm In Rear ( Wall Side ) With A Depth Of 110Mm. The Pipe Is To Be Fixed By Means Of U Clamps At The Centre Of Pipes To Be Fixed.110Mm Dia Pvc Pipe [ 4 Kg / Sqcm ] ( D ) 39 Supplying And Fixing Of 1000 Litters Capacity Pvc Tank Of Approved Quality Including Cost Of All Materials Like Tank Fittings, Lead .Lift, Errection Etc Complete. Pwd Sor Pgno:91 40 Supplying And Fixing In Position First Quality And Approved Variety Of Gun Metal Gate Valve ( Heavy Type ) With I.S.I.Mark Of The Following Sizes Including Cost Of Shellac , Thread Etc, .Including Labour For Cutting And Threading Of G.I.Pipes Etc., Complete Complying With Standard Specifications For Both Internal And External Water Supply Arrangements. ( D ) 41 25Mm Gun Metal Valve 42 32Mm Gun Metal Valve 43 Suppling And Fixing In Position15mm.Diameter Brass / C.P Screw Down Tap / Pillar Tap ( Heavy Duty ) Of Approved Make Conforming To I.S.Specifications And Quality Including Cost Of Shellac, Thread Etc.Complying With Standard Specifications And Including Cutting And Threading Wherever Necessary ( D ) 44 Sd Tap 45 Pillar Tap 46 P.V.C. Pipes ( 10Kg / Sqcm ) Supplying Laying And Jointing P.V.C Pipes ( 10Kg / Sqcm ) Of Approved Quality And Best Variety Conforming To I.S.S & With I.S.I Mark, Of The Following Sizes Including Cutting , Fixing To Pvc Specials Using Adhesive But Excluding Cost Of Such Specials And Fixing To Wall With Necessary Teak - Wood Plugs, Pvc Clamps And Screws, Making Holes On The Wall Or Drilling Holes In Roof And Making Good The Dismantled Portions To Original Condition With Necessary Brick Work And Plastering Wherever Necessary With Necessaryscaffolding Charges. ( D ) 47 20Mm Dia Pipe 48 25Mm Dia Pipe 49 Supplying Pvc Specials ( With Working Pressure 10 Kg. / Sq.Cm. ) In Water Supply Arrangements ( Both In Internal And External Water Supply Arrangements Pwd Sor Pg.No:99 Si.No:367 50 Coupler 51 25Mm Dia 52 32Mm Dia 53 Elbow 54 25Mm Dia 55 32Mm Dia 56 Bend 57 25Mm Dia 58 32Mm Dia 59 Tee 60 25Mm Dia 61 32Mm Dia 62 End Cap 63 25Mm Dia 64 32Mm Dia 65 Reducer 66 25 Mm X 20 Mm 67 32 Mm X 25 Mm 68 Reducer Tee 69 25 Mm X 20 Mm 70 32 Mm X 25 Mm 71 Reducer Elbow 72 25 Mm X 20 Mm 73 32 Mm X 25 Mm 74 Jet Nipple 75 25Mm Dia 76 32Mm Dia 77 Supplying And Fixing In Position Pvc Specials Of The Following Dia And Types Of Approved Quality Confirming To Bis And Providing Leak Proof Joints Including Fixing To The Walls And Giving Connection To The Pvc Soil Stacks, Dismantling The Masonry Or Rcc Works And Re-Doing The Dismantled Portion To Original Condition Etc., Complete Complying With Standard Specifications. ( The Pvc Specials Should Be Got Approved By The Executive Engineer Before Use On Works ) . ( D ) 78 Pvc Elbow 79 110Mm Dia 80 Pvc Elbow With Door 81 110Mm Dia 82 Pvc Tee 83 110Mm Dia 84 Pvc Tee With Single Door 85 110Mm Dia 86 Supplying And Fixing In Position Best Quality Approved Make White Glazed Earthenware Wash Hand Basin Of Size 550 X 400 Mm With A Pair Of Cast Iron Brackets, Including Cost Of 15Mm Diametre Brass Chromium Plated Piller Tape, 32 Mm Diametre C.P. Waste Union, 32 Mm Diametre P.V.C. Waste Pipe With Rubber Plug And Chain, 15Mm Diametre G.M.Wheel Valve, 15Mm Dia Brass Nipple, 15Mm Dia Nylon Connections Etc., Including Fixing The Wash Hand Basin In The Wall In Position With A Pair Of C.I. Brackets With Teak Wood Plugs And Screws And Giving Necessary Water Supply Connection And Paintiung The Brackets With Two Coats Of Paint Over A Primimg Coat Of Anticorrosive Paint Including Testing For Leackage Etc., Complete Complying With Standard Specifications ( D ) 87 Supplying And Fixing In Position Indian Water Closet Of Size 580 X 440Mm, White Glazed Earthen Ware Of Approved Quality With P Trap Or S Trap Confirming To Is:2556 -Part Xii With Sand Cushion And Forming Flooring Alround The Closet Using 40Mm Broken Brick Jelly In Lime Concrete1:2:5 ( One Part Of Lime, Two Parts Of Sand And Five Parts Of Brick Jelly ) 100Mm Thick And Finishing The Top To Required Slope And Including Giving Necessary Connection To Cast Iron Soil Pipes / Pvc Pipes By Dismandling Brick Masonry, Reinforced Cement Concrete Roof / Floor Slab And Making Good The Disturbed Portion To Original Condition Without Leakage Etc., Complete Complying With Standard Specifications And As Directed By The Departmental Officers. 88 S / F In Position Of Indian Make White / Colour Glazed Earthen Ware Lipped Mouth Flat Back Urinal Of Best Approved Quality With G.I.Pipe Connection To Suitable Length, 32Mm Bell Mouthed P.V.C Connection , 15Mm Dia G.M.Wheel Valve, Fixing The Urinal To The Wall In Positionwith Necessary T.W.Plugs , Clamps, Screws, Shellac Etc., Including Dismantling Masonry If Necessary And Redoing The Same To Original Condition , Fixing The 15Mm Dia. G.I.Pipe Connection And Wheel Valve , Painting The Pipe With Two Coats Of Approved Paint Over One Coat Of Primer And Checked Without Any Leakage Complete, Complying With Standard Specifications. - White Colour 89 Supplying And Erecting In Position Of 250 Liters Capacity Industrial Model Reverse Osmosis Water-Cum-Purifier Todeliver Potable Water With World Health Organisation ( Who ) Standards With Following Accessories. ( A ) Ms Skid - 1 No. ( B ) Media 11054 No. Vessel With 20 Nb Multiport Valve ( Withmedia Pubble And Fine Sand And Activated Carbon Filling ) Set ( C ) Feed Pump 0.50 Hp – 1 No. ( D ) Vertical Pump 2-9, 2.00 Hp / Single Phase – 1 No. ( E ) Membrane 40 X 40 Filmtech ( Or ) Equilaents / Osmonic ( Usa ) - 1 No. And Membrane Pressure Vessel 40 X 40 -1 No.& Pressure Gauge - 2 Nos. ( F ) Flow Meter - 1 No. 20” Filter With Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary Cpvc Pipes And Fittings. The System Shall Be Provide With Two Panel Control System With Necessary Stainless Valves And Fittings And Float Control Etc. The Rate Should Be Inclusive Of All Civil Works, Wherever Necessary To Install The System In Position And Intact ( 250Lts ) ( Pwd Sor Pg No 72 ) 90 Supplying And Fixing In Position White Glazed European Water Closet Of Best Quality And Approved Make With 100Mm P Os S Trap With Double Flapped Rigit P.V.C. Seat Cover With C.P. Brass Hinges With 12.5 Litres Pvc Low Level Flushing Tank With All Internal Fittings Etc., Complete Complying With Standard Spoecifications, Labor Inclusive Of Fixing Lowlevel Flushing Tank. 91 White Ewc 92 Supply And Fixing Of Pvc. Nahini / Floor Trap With Stainless Steel Gratings- 100 Mm X 75 Mm Including All Charges Etc, Complete As Per Standard Specification. ( D ) 93 Supply And Fixng Of Tneb Meter Board Suitable For 3 Phase 100A Service Connection Made Up Of Suitable Angle Iron Frame Work Of Size 2 Feet X 1-1 / 2 Feet Using Angle Iron Of Size 1-1 / 2 X 1-1 / 2 X 1 / 4 Rigidly Fixed On Wall Covered With Hylem Sheet Of Size 2 Feet X 1-1 / 2 Feet Of 12Mm Thickness With Necessary Bolts And Nuts Supports And Supply And Fixing Of 3 Nos. 100A Fuse Units ( 500V ) , 1 No. Neutral Link, Copper Earth Flat Of Size 1 X 1 / 4 With Inter Connection Of Eb Meter To Fuse Units By 16 Sq.Mm Pvc Insulated Copper Wire With Earth Connection Complet ( Sd 130 ) 94 Supply And Laying Of 3.5 X 25 Sq.Mm Pvc Armoured Ltug Cable In A Trench To Be Excavated At A Depth Of 0.75 Metre Putting 0.15 Metre Layer Of Sand And Covering The Cable Completely With Bricks And Sand And Refilling The Earth To Make Good 95 Wiring With 2 X 1.5 Sq.Mm. ( 22 / 0.3 ) Pvc Insulated Sc Unsheathed Copper Conductor Of 1100V Grade In Suitable Pvc Rigid Pipe On Wall And Ceiling With Pvc Accessories And With Tw Switch Box And 5A Ft Switch With Painting Of Suitable Colour For Open Pvc Light Point / Fan Point ( For Electronic Regulator ) ( 4 Points Per Coil ) ( Sd 17 ) 96 Upply And Fixing Of 5A / 15A 3 Pin Combined Flush Type Wall Socket With 15A Flush Type Switch Concealed In Suitable Ms Box In Flush With Wall And Covered With 3Mm Thick Hylem Sheet ( Sd 138 ) 97 Earthing As Per The Isi Specification With An Earth Electrode Of 2.10 Metre Class B Gi Pipe Of Dia Not Less Than 40Mm With Copper Earth Plate Of Size 125Mm X 50Mm X 6Mm With Necessary Funneling Arrangements With Necessary Masonry Work And With 38Mm Rcc Cover Slab For The Brick Masonry ( Sd 233 ) 98 Supply And Fixing Of 18W 4 Feet Led Fitting With Led Light Fitting Complete With Tw Round Blocks On Ceiling With Pvc Unsheathed Copper Leads From Terminals To The Fitting ( Sor Page No.114 ) 99 Supplying And Erectingof 12 Mtrs.Mini Mast Tower Polygonal Shapes. Suitable For 12 Luminaries For Wind Speed Up To 180 Km / Hr. As Per Is -875 Parts -3 Material Cons.: Bsen 10025 # Mechanical Components Including Head Frame & Pulley Assay, Winch Bracket, Lantern Carriage Ring, Luminaries And C.G Box Mtg. Arms, Resting Bracket Guide Ring, Compensating Disc, Lightening Arrestor.Etc. ( Each Set ) # Wire Rope, Safety Wire Rope, D Suckle Clamps, Nuts And Bolts. # Cable With Termination & Distribution Box. # Foundation Accessories. # Winch Assembly # Power Tool. Mast Bottom Dia:415 Mm. Top : 150 Mm, Thk: 4, 3, 3 Mm. Motor-1.Feeder Pillar Box Comprising 100 Ams Fuse Unit 24 Hours Timer 1-Nos And Contactor 1-Nos Outgoing Mcb Toggle Switch And Neutral Link With Internal Wiring Made Of Ms Sheet And Vermin Proof.Erection And Commissioning Of 20 Mtr High Mast On The Above Said Concrete Foundation Using Suitable Equipments.Fixing Of Flood Light Luminaries In The Lantern Carriage Including Internal Wiring & Using Flexible Copper Cable Complete. Halonix Led Flood Light 150W ( Cw ) 12 Nos ( Pwd Sor P.No : 151 )

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	31-Oct-2023	EOT	Date	15-11-2023
2	14-Nov-2023	DATE EXTENSION	Date	22-11-2023

Refer document

INR 129000.0 /-

INR 1.29 Crore /-

Name of Work:Construction of Weekly market at ward No.3, Survey No.3

Sl. No.	Item Description
1	Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrockrequiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum ( DATA)
2	Footing
3	Supplying and filling in foundation andbasement with filling M-sand in layers of not more than 15cm.thick well rammed watered and compacted etc., complete complying with standard specification. DATA
4	Refilling with excavated earth in layers of 30 cm watered well rammed and consolidatred conforming to standard specification including labour charges as directed by Engineer in Charge
5	Supplying and filling the basement with Good Earth filling in layers of not more than 15cmthick well rammed watered and compacted - etc., complete complying with standard specification.
6	Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification
7	Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oakjoists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)
8	Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)
9	For plane surfaces such asrectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.
10	For plane surfaces such asrectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.
11	Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials)
12	M-25 CONCRETE - Providing and laying in position, standarised design mix M-25 Grade using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350Kg/m3 and maximum water cement ratio of 0.55, including admixture(plasticiser/super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.70 cu.m.)940.50Kg of 20mm machine crushed stone jelly and with about (2.80 cu.m.)462.00Kg of 10-12mm machine crushed jelly and with about (4.25 cu.m.)701.25Kg of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor/roof slabs wherever neccessary without clambing extra, etc. complete complying with standard specification and as directed by the departmental officers. the coarse and fine aggregates to be used should comply with the requierments of IS 383-2016. (No separate payment will be made by the department for the exces usage of materials as per design mix.) (SI No 81)
13	Foundation
14	Ground Floor
15	Suppling and fabricating and placing in position MS(or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost ofsteel and binding wire also in all floors.
16	Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9"X43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification.
17	Ground Floor
18	Brick Partition Walls using II class ground moulded chamber bricks of size 9"X43/8"X 23/4"in C.M 1:3using hoop iron reinforcement,if found necessary standard specification including finishing, curing,etc., complete complying with standard specification - 10 sqm
19	Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour chargesetc., complete as per standard specification
20	Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)
21	Plastering with cement mortar 1:3,10 mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)
22	Painting 2 coats with approved cement paint over cement plastered wall surface, ceiling and other new surface and including cleaning, preparing the surface and curing etc., complete.
23	Finishing the top of floor with Granolithic Finish with CC 1: 2: 4 (one cement, two sand & four HBG jelly) using chips of grade 10 mm andbelow for 25mm thickness and rubbed smooth etc, complete as per standard specification.
24	Paving the floor with design Rajasthankotta tiles (colour and shade as directed) of size 610 mm x 610mm x 20mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement etc, complete as per standard specification
25	Supplying and fixing in position Cement basedhydrualically pressed Anti-Skid tiles (pattern design) 20 mmthick in cement mortar 1:3 - 20mm thick & pointedwith same colour of cement etc., complete as per standard specification
26	Dadooing walls withGlazed tiles of sizes 305mm X200mm X 6mm size of approved make and quality and colour l Set in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed.
27	Supplying & fixingdoor shutters for Mediun Density Fiber Board of exterior grade 35 mm thick,single leaf conforming to IS:12406/1989 with 35x12 mm T.W.Lipping on all edges with necessary adhesives and CP screws complying with standard specifications. The rate is inclusive ofthreee coats of best quality varnish but excluding cost of furniture fittings.such as 300 mm tower bolt 2nos,200mm towerbolt I no. 300mm Aldrop 1 No. Alu handle ornamental type 2 Nos,and 1 No. Door stopper etc complete.
28	Supply and fixing of PVC Solid Doors using 19gauge 19mm MS Sq,tubes for styles and frames, 15mm MS Sq.tubes for to, Lock and bottom rails. The Steel Tubes shall be covered with 5mm thick Solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in positionincluding furniture and fittings. The over all size of styles shall be 50mm X 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm X 30mm. The over all size of frames shall be 50mm X 45mm with suitable tabate for housing the shutter etc, complete as per standard specification. PWD SOR Pg. No. 48
29	UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work PWD SOR Pg. No. 66
30	UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work(PWD SOR Pg. No. 65)
31	Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete
32	Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being "32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10 cum
33	Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete (PWD SOR P.NO :57)
34	Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification
35	Supplying and laying rubberised inter locking paver block m40 grade providing and laying of 83mm thick high strength type confirming IS 15658-2006 of rubberised inter locking paver block insize of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approvednon skitting surface in the top and the rate including levelling the base preparation ofpavers as sub base, stone dust cushion 150mm thick layingout of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.
36	Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.
37	Fabricating supplying and fixing of Galvalume Colour Sheet of size 0.47mmwith the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.
38	Providing & fixing PVC RAIN WATER DOWN FALL PIPE of the following dia with necessary T.W.Clamps Plugs, Shoes, Bemds, other clamps, screws nails etc., complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150X25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of "U" clamps at the centre of pipes to be fixed.110mm dia PVC Pipe [4 Kg/SqCm](D)
39	Supplying and fixing of 1000 litters capacity PVC tank of approved quality including cost of all materials like tank fittings, lead .lift, errection etc complete. PWD SOR PGNO:91
40	Supplying and fixing in position first quality and approved variety of Gun Metal Gate Valve (Heavy type ) with I.S.I.mark of the following sizes including cost of Shellac , thread etc,.including labour for cutting and threading of G.I.Pipes etc.,complete complying with standard specifications for both internal and external water Supply arrangements. (D)
41	25mm Gun Metal Valve
42	32mm Gun Metal Valve
43	Suppling and fixing in position15mm.diameter brass / C.P screw down tap / pillar tap (heavy duty) of approved make conforming to I.S.specifications and quality including cost of shellac, thread etc.complying with standard specifications and including cutting and threading wherever necessary (D)
44	SD Tap
45	Pillar Tap
46	P.V.C. Pipes (10Kg/SqCm) Supplying laying and jointing P.V.C pipes (10Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessaryscaffolding charges.(D)
47	20mm dia Pipe
48	25mm dia Pipe
49	Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements PWD SOR PG.NO:99 SI.NO:367
50	Coupler
51	25mm dia
52	32mm dia
53	Elbow
54	25mm dia
55	32mm dia
56	BEND
57	25mm dia
58	32mm dia
59	Tee
60	25mm dia
61	32mm dia
62	End Cap
63	25mm dia
64	32mm dia
65	Reducer
66	25 mm x 20 mm
67	32 mm x 25 mm
68	Reducer Tee
69	25 mm x 20 mm
70	32 mm x 25 mm
71	Reducer Elbow
72	25 mm x 20 mm
73	32 mm x 25 mm
74	Jet Nipple
75	25mm dia
76	32mm dia
77	Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).(D)
78	PVC Elbow
79	110mm dia
80	PVC Elbow with Door
81	110mm dia
82	PVC Tee
83	110mm dia
84	PVC Tee with Single Door
85	110mm dia
86	Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications (D)
87	Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with "P" trap or "S" trap confirming to IS:2556 -Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers.
88	S/F in position of Indian Make White/Colour glazed earthen ware lipped mouth Flat Back Urinal of best approved quality with G.I.Pipe connection to suitable length,32mm bell mouthed P.V.C connection ,15mm dia G.M.Wheel valve,fixing the urinal to the wall in positionwith necessary T.W.plugs ,clamps,screws, shellac etc.,including dismantling masonry if necessary and redoing the same to original condition ,fixing the 15mm dia. G.I.pipe connection and wheel valve ,painting the pipe with two coats of approved paint over one coat of primer and checked without any leakage complete, complying with standard specifications. - White Colour
89	Supplying and erecting in position of 250 liters capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20” Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact(250lts)(PWD SOR PG NO 72)
90	Supplying and fixing in position White Glazed European Water Closet of best quality and approved make with 100mm "P" os "S"" trap with Double flapped rigit P.V.C. seat cover with C.P. brass hinges with 12.5 litres PVC Low Level Flushing Tank with all internal fittings etc., complete complying with standard spoecifications,labor inclusive of fixing lowlevel flushing tank.
91	White EWC
92	Supply and fixing of PVC. Nahini / Floor Trap with stainless Steel Gratings- 100 mm x 75 mm including all charges etc, complete as per standard specification.(D)
93	Supply and fixng of TNEB meter board suitable for 3 phase 100A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1-1/2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 100A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complet (SD 130)
94	Supply and laying of 3.5 x 25 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good
95	Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (4 points per coil) (SD 17)
96	upply and fixing of 5A / 15A 3 pin combined flush type wall socket with 15A flush type switch concealed in suitable MS box in flush with wall and covered with 3mm thick hylem sheet (SD 138)
97	Earthing as per the ISI specification with an earth electrode of 2.10 metre Class "B" GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry (SD 233)
98	Supply and fixing of 18W 4 Feet LED Fitting with LED Light fitting complete with TW round blocks on ceiling with PVC unsheathed Copper leads from terminals to the fitting (SOR Page No.114)
99	Supplying and erectingof 12 Mtrs.Mini Mast Tower Polygonal Shapes. Suitable for 12 luminaries for Wind Speed up to 180 Km/hr. As per IS -875 Parts -3 Material Cons.: BSEN 10025 # Mechanical Components including Head Frame & Pulley Assay, Winch Bracket, Lantern Carriage Ring, Luminaries and C.G Box Mtg. Arms, Resting Bracket Guide Ring, Compensating Disc, Lightening Arrestor.etc. ( Each Set ) # Wire Rope, Safety Wire Rope, D Suckle Clamps, Nuts and Bolts. # Cable with termination & distribution box. # Foundation Accessories. # Winch Assembly # Power tool. Mast bottom Dia:415 mm. Top : 150 mm, Thk: 4,3,3 mm. Motor-1.Feeder pillar box comprising 100 ams fuse unit 24 hours timer 1-nos and contactor 1-nos outgoing MCB toggle switch and neutral link with internal wiring made of MS sheet and vermin proof.Erection and commissioning of 20 Mtr high mast on the above said concrete foundation using suitable equipments.Fixing of flood light luminaries in the lantern carriage including internal wiring & using flexible copper cable complete. Halonix LED Flood light 150W ( CW ) 12 nos (PWD SOR P.NO : 151)