|
| 1 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundationetc. complete. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a leadof 50 m.-All kinds of soil |
| 3 | Supplying and filling in plinth, under floor, foundations etc.with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 4 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.-All kinds of soil |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering --All work upto plinth level: |
| 6 | 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size) |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering --All work upto plinth level: |
| 8 | Centering shuttering including struttings, propping etc. and removal of form work for: |
| 9 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. using shutteringply |
| 10 | Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply |
| 11 | Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply |
| 12 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 13 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement |
| 14 | 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 15 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement . |
| 16 | 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size). |
| 17 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-All work upto plinth level: |
| 18 | 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size). |
| 19 | First class brick work in foundation and plinth including cost of all materials as required complete |
| 20 | In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 21 | Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:- |
| 22 | In cement mortar 1:4 ( 1 cement : 4 fine sand) |
| 23 | 12 mm cement plaster of mix |
| 24 | In cement mortar 1:4 ( 1 cement : 4 fine sand) |
| 25 | 15 mm cement plaster on the rough side of single or half brick wall of mix |
| 26 | In cement mortar 1:4 ( 1 cement : 4 fine sand) |
| 27 | White washing with lime to give an even shade. |
| 28 | Colour washing such as green, blue or buff with whitingto give an even shade: |
| 29 | New work (two or more coats) with a base coat of white washing with lime . |
| 30 | Finishing walls with textured exterior paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : |
| 31 | New work (two or more coats) with a base coat of white washing with lime . |
| 32 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: |
| 33 | Providing structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required. |
| 34 | Neat cement punning. |
