Military Engineer Services-MES has published Tender For Special Repairs To Roof Treatment Changingof Old Asbestos Sheet, Wall Plastering, Plumbing, Flooring, Re Wiring In Signal Centre Complex Bldg No P-1 Under Ge(South) Bangalore. Submission Date for this Tender is 07-11-2023. Electrification Work Tenders in bangalore Karnataka. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 31-Oct-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-11-2023 |
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) including concrete padding over roof complete. |
| 2 | Removing building materials to a distance of exc. 1.0 Km but not exc. 5.0 Km (1 Metric tonne = 1 Load and One Cum = 1735 Kgs) out side MD Land Complete all as directed. |
| 3 | M&L for 75 mm thick, PCC 1:3:6 type C2, using 40mm graded stone aggregate, finished even and smooth without using extra cement as in plinth protection, complete all as specified and directed. |
| 4 | M &L providing cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) in lintel upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, stringcourses lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones bed plates,kerbs incl weathering slightly rounded or chemfered angles and throating complete all as specified and directed. |
| 5 | Dismantling unframed timber scantling 40 sq cm and over in section in any position complete all as specified and directed. |
| 6 | Dismantling asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings,incl ridgesetc complete all as speicifed and as direceted. |
| 7 | Dismantling framed timber fillets, rails, posts, rafters, purlins etc under 40 sq cm in section in any position complete all as specified and directed. |
| 8 | M&L 2nd class hard wood clean sawn in as in scantling fixed in repairs complete all as specified and directed . |
| 9 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and directed. |
| 10 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and directed.. |
| 11 | M & L for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengthsi.e. within 20mm of the length indicated complete all as specified and directed. |
| 12 | M & LRooftrusses Fe-410W(GdeE-250) qualityB (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed. |
| 13 | Removing Existing water proofing treatment, including bedding concrete etc complete, cleaning the surfaces with wire brushes, removing dust, foreign material ,scrubbing down with water and rubbish off the same beyond the Defence land complete all as specified and directed. |
| 14 | Material and labour for PCC 1:2:4 type B0(using 12.5mm graded stone aggregate) forbuton roof slab as required to fill up the undulations to maintain smooth slope (avg thickness 40 mm.) complete all as specified and directed. |
| 15 | Material and labour for rendering 15mm thick in CM 1:4 on roof surfaces mixed with WPC finished even and smooth without using extra cement complete all as specified and directed. Note: WP compound will be measured and paid seperately. |
| 16 | Supply only integral water proofing compound ISI Marked as approved, all as specified and as directed by Engineer-in-Charge. |
| 17 | Material and labour for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) for filleting and benching, slightly rounded or chamfered on edges complete all as specified and directed. |
| 18 | M&L for cleaning the plastered/concrete surfaces with wire brushes and applying water proofing treatment as under: (a) Apply bitumen primer at the rate of 0.27 litre per Sqm as per IS 3384-1986 and bonding bitumen of VG-10 @1.20 Kg per Sqm. (b) APP modified water proofing memebrane as per IS 16540/16532-2017,3mm thick and weighing not less than 3.50 kg per Sqm reinforce polyster/HMHDPE matt black finish over compatible primer/bonding bitumen and finish the top surface with bituminus aluminium paint @0.10 Ltr per Sqm complete all as specified. |
| 19 | Dismantling of old Ceiling/boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 20 | S&F anodised aluminium snap grid frame work for false ceiling, size of grid 605x605mm, complete all as specified. |
| 21 | Hangers 6 mm dia G.I (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long complete all as specified. |
| 22 | M&L12mm fibre insulation designer boards fixed to timberframework with nailsand work as in ceiling complete all as specified and directed. |
| 23 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing debrits out side the MD land complete all as specified and directed. |
| 24 | S&F coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 25 | S&F coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 26 | S&F coloured Glazed ceramic tile in verticle surface 300x200x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl rendering 10 mm thick on fair faces of brick work or concrete surfaces as backing coat in cement mortar 1:4 complete all as specified. |
| 27 | S&F light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, over 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 28 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 29 | M&L precast cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in block masonry with solid blocks, exc 10 cm in width and setting in mortar1:6 complete complete all as specified and directed. |
| 30 | Taking down cement plaster on brick or stone walls etc, incl raking out joints, hacking for key scrubbing down with water, etc. complete all as specified and directed. |
| 31 | M&L rendering 15mmthick in Cm 1:6 on bricksurfaces finished even and smooth without using extra cementcomplete all as specified and directed. |
| 32 | M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces mixed with integral water proofing compound as per manufacturer"s instructions, surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. (Note :-Water proofing compound shall be measured and paid for separately as supply only under relevant item of this schedule). |
| 33 | M&L rendering 5mmthick in Cm 1:4 on concrete surfacesof ceilings finished even and smooth without using extra cementall as specified and directed. |
| 34 | M&L preparation of newly plastered surfaces of wall and applying two coats ofdistemper oil emulsion white or tint with priming plastered and other surfaces incl 1 mm thick wall care putty on plastered surface complete all as specified. |
| 35 | M&L preparation of newly plastered surfaces of Ceiling and applying three coats of white washcomplete all as specified. |
| 36 | M&L for preparation of new plastered surfaces of walls Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete. |
| 37 | M&L for preparation of old distempered surfaces of walls and applying One coat of Oil bounddistemperincluding stopping of nail holes, filling of cracks, etc and cleaning all window panes from splashes / droppings, all as specified and directed. |
| 38 | M&L for Preparation of Old surfaces of walland Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqmcomplete all as specified and directed. |
| 39 | M&L preparation of old plastered surfaces of ceiling and applying One coat of white washcomplete all as specified. |
| 40 | M&L for 18/19mm thick Pre-laminated Particle board, interior grade, prelaminated one side with decorative choice lamination & otherside balancing white lamination, fixed with screws to timber framefixed in repairs complete all as specified and directed. |
| 41 | Taking down chowkat or frames with shutter (without taking off shutters from the frame) not exc 1.5 sqm |
| 42 | Taking down chowkat or frames with shutter (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 Sqm |
| 43 | S&F solid PVC door frame at size 50 mm x47mm made out of 5 mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixed in opening as per specification and drawings complete all as specified and directed. |
| 44 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel havinga PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side colour PVC shet to be fitted in the M.S frame selded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement fixed to frame, all as per specification & drawing complete all as specified and directed. |
| 45 | S&F second class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 46 | S&F second class hard wood 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed. |
| 47 | Taking down and re-fixing in same openingshutters or Aluminium partition of any description exc 1.0 Sqm but n.exc 2 Sqmafter necessary repair complete all as specified and as directed. |
| 48 | S&F Powder Coated aluminium frame for frame work, partitions doors, windows, ventilators and aluminium grills for windows etc, with one or more rebates including joining cleat for rebates including joining cleats for fixing etc, complete all as specified & directed by Engineer-in-Charge. |
| 49 | S&F Powder Coated aluminium Door shutters, aluminium section weighing 0.55 Kg/m incl necessary joining cleats, glazing clips, rubber packing, handle 02 Nos in each door, hinges Powder coated aluminium snap beading, screws etc, complete all as specified. |
| 50 | S&FSteel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay,complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 51 | S&FSteel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed. |
| 52 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 53 | S & F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165complete all as specified and directed. |
| 54 | M&L in repair 9 mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations fixed with screws to aluminium door shutters complete all specified & directed by Engineer-in-Charge. |
| 55 | S&F 5.5 mm thick tinted sheet glass and glazing with aluminium beading & rubber gasket in exc. 0.5 Sqmin each panes complete all as specified & directed by Engineer-in-Charge incl hakcing out brokenglass complete all as specified and directed. |
| 56 | S&F 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified. |
| 57 | S&F stainless steel 100 mm butt hinges for doors completeall as specified. |
| 58 | S&F 150 mm size extruded aluminium alloy handles fabricated type anodized complete upto 5th floor of bldgs all as specified. |
| 59 | S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified |
| 60 | Supply and fix300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified. |
| 61 | S&F150 mm long floor door stopper of aluminium alloy body and tongue,anodised,with hard drawn steel spring ,complete all as specified. |
| 62 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples complete all as specified. |
| 63 | M&L preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified. |
| 64 | M&L preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified. |
| 65 | M&L preparation of new or previously untreated steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enemel paint over a coat of red oxide complete all as specified. |
| 66 | S&F in repair Aluminium anodised tubular curtain rod 20 mm dia all as specified and as directed complete all as specified and directed. |
| 67 | S&F in repairs fancy type brass bracket with screws for wall corners 25 mm dia including wooden plugs complete all as specified |
| 68 | Dismantling water tanks and removing exc 250 & n .exc 500 Ltr capacity |
| 69 | S&F 500 Ltr rotational moulded poly-ethylene water tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I complete all as specified |
| 70 | S&F 20 mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe of brass ferrule and fixed complete all as specified. |
| 71 | S & F of CPVC pipes 15mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including concealed in walls and taking down of pipe of 15 mm GI pipe complete all as specified. |
| 72 | S & F of CPVC pipes 20mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 20 mm GI pipe complete all as specified. |
| 73 | S & F in repair washdown water closet orissa pattern size 580x440mm white with integral footrest and trap, including connection to drain and to flushing pipe incl making good to floor and flush pipe and joint between flushing pipe and sockets of water closet pan complete all as specified. |
| 74 | S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)including CI/PVC/Vitreous china"P" or "S" trap , 110 mm dia PVC(SWR) WC connector and 75 mm dia piperequired length for Nahani trap along with grating complete all as specifed and as directed. |
| 75 | S&F in plastic water closet seat cover, White, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specifed and as directed. |
| 76 | S&F Vitreous china bowl urinal , flat back size- 465x355x265mm white (minimum), with grating and union for discharge pipe (Excluding flushing cistern , flush pipe and waste pipe complete all as specified. |
| 77 | S&F in repair PVC low level flushing cistern 10 ltr capacity, valveless, syphonic action type with inlet, ball valve float and handle incl brakcet and flush pipe 32 mm dia complete all as specified. |
| 78 | S&F,in repairsHealth Faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metrelong flexible tube and ABS wall hook including making connections and fixed in positioncomplete in all respect as specified . |
| 79 | S & F in repair vitreous china white wash hand basin flat back size 550x400 mm incl brackets chain & plug and with waste pipe waste coupling etc complete all as specified. |
| 80 | S & F PVC connection 15 mm dia with PTMT nuts of lenth 600 mm complete all as specified. |
| 81 | S & F in repair 600x450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC Bldg board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified. |
| 82 | S&F in repairs angle valves male/female threaded 15 mm nominal bore, brass, fancy type, chromium plated, screwed down, high pressure with Capston head, screwed both ends for iron/CPVC pipes or for unions completeall as specified and directed . |
| 83 | S&F in repairs 75 mm dia PVC (SWR) floor trap, plain with grating incl jointing with solvent cement complete all as specified. |
| 84 | S&F in repair 32 mm dia PVC waste pipe for WHB/Urinal complete all as specified. |
| 85 | S&F in repair Towel Rail 600 mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (min wt 190 gms) complete all as specified. |
| 86 | S&F in repair stainless steel soap dish approximate size 160x160x90 mm embedded in the wall complete all as specified . |
| 87 | S&F in repair 15 mm bore pillar taps, cast copper alloy, fancy type with capstan heads, chromium plated screwed down high pressure with or without lattered "Hot" or "Cold" with long screwed for iron pipe and fixed complete all as specified. |
| 88 | S&F in repair 15 mm bore Fancy type Bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. |
| 89 | Demolition and breaking up drain pipes upto 110 mm dia (Salt glazed ware, AC or Reinforced concrete/ PVC(SWR)) set in cement mortar or solvent. |
| 90 | S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified. |
| 91 | S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified. |
| 92 | S&F PVC (SWR) bends for 75 mm bore pipes complete all as specified. |
| 93 | S&F PVC (SWR) bends for 110 mm bore pipes complete all as specified. |
| 94 | S&F 75 mm bore PVC (SWR) bends any radius with access door |
| 95 | S&F 110 mm bore PVC (SWR) bends any radius with access door |
| 96 | Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches, ceiling rose, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in sae custody or for taking credit (creddit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and as directed. |
| 97 | M & L for point wiring of surface type with single core 1.5 Sqmm PVC insulated sheathed single core multistranded copper conductor cable (FRLS) including 1.5 Sqmm PVC insulated sheathed copper conductor as earth continuity conductor drawn in and incuding ISI marked PVC casing ca[ing not less than 20mm width with its accessories, and fixef in existing sunk boxes and covered with new 3.00mm thick ISI marked laminated sheet cover and bras screw with cup washers for fixing switches / sockets / regulators etc. |
| 98 | One light point / fan controlled by one switch |
| 99 | One 3 pin 5 Amps socket outlet point on independent board. |
| 100 | One 3 pin 5 Amps socket point on the same board with other switches |
| 101 | All as per item no 39 here in before but wiring with 4.00 Sqmm unsheathed single core PVC insulated multistranded copper conductor for 3 pin 15 Amps socket outlet on independent board. |
| 102 | M & L ceiling rose surface bakelite 65 x 50mm two to three terminals all as specified and as directed. |
| 103 | M & L switch piano, flush type single pole one way 5 Amps all as specified and as directed. |
| 104 | M & L switch socket combination 2 in 1, 3 pin 6Amps fllush type universal all as specified and as directed. |
| 105 | M & L switch socket combination 2 in 1, 3 pin 6Amps and 16 Ampsfllush type universal all as specified and as directed. |
| 106 | S & F stepped type electronic fan regulator flush type 230volt AC complete all as specified and as directed. |
| 107 | S & F in repairs PVC FRLSH copper cable 1.5 Sqmm single core complete all as specified and as directed. |
| 108 | S & F in repairs PVC FRLSH copper cable 2.5 Sqmm single core complete all as specified and as directed. |
| 109 | M & L of sub main wiring concealed type with two runs of single core, PVC insulated unsheathed multi stranded copper conductor cable of size 6.00 Sqmm, 1100 volts grade (FRLS) and one run of 6.00 Sqmm PVC insulated multi stranded copper conductor cable (FRLS) for earth continuity conductor drawn through and including suitable size ISI marked rigid fire retardant PVC conduit with all necessary accessories such as bends, tees, junction boxes, elbows etc including cutting chasing existing surrface to ocnceal the conduit and making good to the disturbed surface to match with existing surface including taking down old unserviceable sub main wiring any size complete all as specified and as directed. Note: Two runs of 6.00 Sqmm cable, one run of 6.00 Sqmm continuity earth wire and one run of PVC non metallic conduit with all necessary accessories will be measured as one length. |
| 110 | S & F in repair MCCB 4 pole 100Amps, 16KA breaking capacity complete with MCCB enclosure all as specified and as directed.. |
| 111 | S & F in repair sheet metal enclosure Triple pole and neutral, 415 volts, 6 way double door with 200Amps rated bus bar including taking down old unserviceable DB / main switch board complete all as specified and as directed. |
| 112 | S & F in repair sheet metal enclosure Triple pole and neutral, 415 volts, 4 way double door with 200Amps rated bus bar including taking down old unserviceable DB / main switch board complete all as specified and as directed. |
| 113 | S & F in repair sheet metal enclosure single pole and neutral, 240volts 8 way double door with 200 Amps rated bus bar including taking down old unserviceable DB / main switch board complete all as specified and as directed. |
| 114 | S & F of MCB TPN 40 to 100 Amps, 415 Volt, 10 KA "C" curve including taking down of old one complete all as specified and as directed. |
| 115 | S & F of MCB TPN 16 to 32 Amps, 415 Volt, 10 KA "C" curve including taking down of old one complete all as specified and as directed. |
| 116 | S & F of MCB SPN 32 Amps, 240 Volts "C" curve including taking down of old one complete all as specified and as directed. |
| 117 | S & F of MCB SP 5 to 32 Amps, 240 Volts "C" curve including taking down of old one complete all as specified and as directed. |
| 118 | S & F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps including taking down of existing one complete all as specified and as directed. |
| 119 | M & L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the earth plate at a depth of not less than 1.5mtr below ground level connected to galvanized iron strip 25 x 4mm as earthing lead by means of bolts, nuts and washers made out of GI / steel earth strip protected by GI light grade pipe of 40mm dia and connecting to main panel board / switch board / control board all shown in electrical plate no 3 of SSR Part I including PCC chambers in 1:2:4 and RCC cover slab with 8mm dia MS bars reinforced at 10cm center to center both ways including earth work like excavation, returning, filling back disposal including taking down of existing earthing material complete all as specified and as directed. |
| 120 | S & F LED Luminaire 600mm x 600mm ( 2 feet x 2 feet) 36 watt, 220 V AC reccessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all accessories including taking down of existing one all as specified and as directed. |
| 121 | S & F LED lights fitting 4 feet, 20 watts, 220 V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose with all accessories including taking down of existing one all as specified and as directed. |
| 122 | S & F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V, 1200mm sweep , Min air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC) including dismantling old fan and depositing it to AGE E/M store yard complete all as specified and as directed. |
| 123 | S & F Exhaust fan, steel body AC single Phase 230V of size 380mm sweep with blades and frame and louvers complete including dismantling old fan and depositing to AGE E/M store yard complete all as specified and as directed. |
| 124 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and not exceeding 1.5m for laying of LT under ground cables / GI pipes getting out as in hard / dense soil complete all as specified and as directed. |
| 125 | Returning & filling in trench spreading, levelling, watering and well ramming in layers not exceeding 25cm deep as in deep as in soil complete all as specified and as directed. |
| 126 | Removing excavated material n exc 50 mtrs and depositing where directed at a level n exc 1.5 mtrs above starting point as in soil complete all as specified and as directed. |
| 127 | Supply, laying dry river sand in trenches for cable cushioning all as specified in clause 19.75 of SSR Part I. Note: Punned thickness of sand only will be measured & Paid. |
| 128 | Supply, laying, testing and commissioning of LT under ground cable XLPE insulated, armoured, heavy duty, Electric cable, size 50 Sqmm 4 Core with stranded aluminium conductor 1100 volts grade conforming to IS 7098 (Part I) 1988 laid in trenches / walls / floors / ducts etc fixed with saddle and clamps or passing through pipes complete with cable ends connection with proper thimbles nut bolt washer including taking down of existing cable complete all as specified and as directed. |
| 129 | Supply and lay burnt bricks cable cover, class LV type 1 flat size 230mm x 115mm x 70mm of burnt bricks used as cable protection covers including taking down of existing one complete all as specified and as directed. |
| 130 | Supply & laying GI tubing light grade of size 50mm with necessary fittings as in cable protection laid in trenches / road / fixed on wall / floor including necessary clamps bolts and nuts complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
