|
| 1 | Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) including floor finishesand disposing off the debris out side naval Dockyard premisescomplete all as specified and as directed. |
| 2 | M&L for hard core of broken stone or boulder of gauge not exc 63mm deposited spread and levelled in layers not exc 15cm thick watered and rammed to true surface complete all as specified and as directed.. |
| 3 | M&L for 100 mm thick cement concrete type B- 2, 1:2:4 (40mm graded stone aggregate) complete all as specified and directed. |
| 4 | M&L for 75mm thick in cement concrete type C2 1:3:6 (Using 40mm graded stone aggregate) as in plinth protection finished even and smooth with out using extra cement complete all as specified and directed. |
| 5 | M&L for forming Construction(Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade ‘A’ complete all as specified and as directed. |
| 6 | Demolition of brick work or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facing, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 7 | M&L forPre cast cement concrete type1:3:6 type C-1 (20mm graded stone aggregate) block masonry with solid blocks exceeding 10 cm in width and setting in cement mortar 1:4complete all as specified and as directed. |
| 8 | Taking down cement plaster onbrick work of concrete surfaces ofwalls/Ceiling etc including racking out joints hacking for key scrubbing down to watercomplete all as specified and as directed. |
| 9 | M&L for rendering15 mm thick plaster in CM (1:4) on fair faces of brick or concrete surfaces of walls finished even and smooth without using extra cement complete all as specified and directed. |
| 10 | M&L for rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces of walls finished even and smooth without using extra cement complete all as specified and directed. |
| 11 | M&L for preparation of newplastered surfaces of walls and applying two coatsof distemper oil emulsionover a coat of primer with one coatbirla putty complete all as specified and directed. |
| 12 | M&L for complete removal of existing treatment on walls and applying two coatsof distemper oil emulsion over one coat of primer with one coat ofbirla putty complete all as specified and directed. |
| 13 | M&L for preparation of new plastered surfaces of walls and applying two coats of exterior weather proof emulsion over a coat of alkaline resistance primer complete all as specified and directed. |
| 14 | M&L for complete removal of existing treatment on walls and apply two coats of exterior weather proof emulsion over a coat of alkaline resistance primer complete all as specified and directed. |
| 15 | M&L for prepartion of existing old wooden surfaces and applying one coat of synthetic enamel paint over 10 cm width or girth complete all as specified and directed. |
| 16 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover filletscomplete all as specified and as directed. |
| 17 | S&Fanodised aluminium snap grid frame work of size 605x605mmusing main and cross tee of size 15mm x 15mm x 1.5mm ( weight not less than 0.12 kg / Rm)and wall angle of size 40mm x 25mm x 2mm( weight not less than 0.36 kg / Rm) and for insulation and accoustic purpose 60cm x 60cm x 12mm in size fixed withscrews to the aluminium frame work in ceiling withscrews to aluminum frame work in ceilings with hanger 6mm dia GI (up to 1200mm length) adjusting level fixed to roof slab/wall panelling by means of ceilng cleats made out of GI flat 40x 3mm size 60mm long and expansion hold fastners 12.5mm dia 40mm long including cover fillets complete all as specified and as directed. |
| 18 | Dismantling of paver blocks of any description and removing rubbish outside the Dockyard premises complete all as specified and directed. |
| 19 | Labour only for laying machine pressed precast cement concrete interlocking paver block obtained from above Dismantlingwith grey cement and pigment any shape complete all as specified and directed. |
| 20 | M&L for machine pressed precast cement concrete interlocking paver block with grey cement and pigment any shape and size of 60mm thickness , M-35 graded laid over sand cushioning complete all as specified and as directed. |
| 21 | M&L for sand filling under floor or in foundation including watering consolidation complete all as specified and as directed. |
| 22 | M&L for 100 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate in sub base,foundation filling and mass concrete complete all as specified and directed. |
| 23 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing)and removing the debries outside from the Dockyard premises complete all as specified and as directed. |
| 24 | M&L chequered cement concrete tiles with grey and any pigments 30cm x30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors and incl cement screed 15mm thick in 1:6 complete all as specified and directed. |
| 25 | Dismantling structural steel workframed truss at any height etc complete all as specified and directed. |
| 26 | M&L for strctural steel work as in roof truss (framed), trussed, purlins, rails and fastenings and heavy bracket framing (Beam, Tee, Angle, Channelor flat sectios) including distance pieces, cleats etc.confirming to Fe-410-W(Gde-E-250) quality at any height complete all as specified and directed. |
| 27 | M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes,without any attachment confirming to Fe-410-W(Gde-E-250) complete all as specified and as directed |
| 28 | M&L for Preparation of new steel surfaces of any descriptions over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat ofzinc chromate at any height complete all as specified and directed. |
| 29 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, includingainital or similar pattern roof coverings at any height complete all as specified and directed. |
| 30 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated / trapiziodal or any apttern / profile steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws at any height complete all as specfied and dierected |
| 31 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws at any height complete all as specified and directed. |
| 32 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated / trapiziodal or any apttern / profilesteel sheet crimp curved at end for chajjas/roof sheets 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws at any height complete all as specified and directed. |
| 33 | M&L for Light shade vitrified ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick cement mortor (1:6) screed bed complete all as specified and directed. |
| 34 | M&L non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to matchlaid over and including screed bed in CM 1:6 , 15mm thick complete all as specified and directed. |
| 35 | M&L for coloured glazed ceramic tiles 450 x 300 x 7 mm thick in dado set and jointed in neat cement slurry and pointed in coloured cement to match fixed over incl redenring in CM 1:4, 10mm thick complete all as specified and directed. |
| 36 | S&F in repairsvitreous China wash down water closet pan (pedestal pattern) white excluding fixing bolts, flushing cistern and flush pipecomplete all as specified and directed. |
| 37 | S&F in repairs 75 mm dia PVC pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 38 | S&F 75 mm dia PVC (SWR) bends any radius complete all as specified and as directed. |
| 39 | S&F in repairs 110 mm dia PVC pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 40 | S&F 110 mm dia PVC (SWR) bends any radius complete all as specified and as directed. |
