Tender For Proposed Cement Concrete Road From Damji Nagar To Shankar Aappa Nagar. At Pachora City. Dist Jaigaon. Under Vaishishtyapurna Yojna.
Tender Value
48.81 Lakhs
Estimated cost
Bid Submission
17 Oct 2023
0 days left
EMD
48813
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
pachora → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Proposed Cement Concrete Road From Damji Nagar To Shankar Aappa Nagar. At Pachora City. Dist Jaigaon. Under Vaishishtyapurna Yojna.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for roadway in hard murum and boulder including dressing section to the required grade, camber and side slopes & conveying the excavated materials with all lifts upto a lead of 50m.and spreading for embankment or stacking as directed. |
| 2 | Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering & compacting to not less than 97% of standard Proctor density for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed |
| 3 | Providing rubble filling of trap/ granite/ quartzite gneiss stones for foundations including filling voids with sand/grit and compaction etc. complete. |
| 4 | Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader / Paver on prepared surface & compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - II Materia |
| 5 | Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse & fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, , cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads & lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-in charge , compacting with vibratory roller, finishing, curing & including preparation of sub-grade surface if required etc. complete. |
| 6 | Providing and laying in-situ M30 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement , coarse & fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a Tilting type Concrete Mixer as per approved mix design, admixtures, spreading, laying compacting & finished in a continuous operation without paver machine, finishing to lines and grades as directed by Engineer-in-charge& curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom & 40 mm at top with depth of 75mm & maintaining the same throughout curing period by any other method approved by Engineer-in-charge. |
| 7 | Supplying hard murum/ kankar at the road site, including conveying & stacking complete. |
| 8 | Spreading hard murum/ soft murrum/ gravel or kankar for side width complete |
| 9 | Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete. |
| 10 | Providing, cutting, bending, hooking, tying and laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc. complete. |
| 11 | Cutting transverse contraction joints 3 to 4 mm wide & depth 60mm. .in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer incharge. |
| 12 | Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to IS 3395 : 1997 below concrete pavement including all materials and labour complete |
| 13 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface- Providing& laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks & holes.complete. |
| 14 | Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
| 15 | Royalty Charges - Supply of Rubble, Murum,Soil,60mm/40mm,metal( hand broken),royalty charges are not included in the rates.(As per Govt of Maharashtra,Revenue and forest Department Gazette No 146 Dt 04June2021 states that the royalty charges of Rs 211.95/Cu.m) are considered. The surcharge leveied on royalty shall also be payable Royaty Charges for Sand. |
| 16 | Royaty Charges for other Material |
| 17 | Laboratory testing charges - BASIC TEST OF AGGREGATE, .(Water Absorption, Specific Gravity, Impact Value, Crushing Value) |
| 18 | Laboratory testing charges -BASIC TEST OF CEMENT, Standard Consistency Fineness, Specific Gravity, Setting time,(Initial & Final) ,Compressive strength, Soundness |
| 19 | Laboratory testing charges - CONCRETE, Compressive Strength of C.C. Cube (Set of 3 Cubes) |
| 20 | Laboratory testing charges - FINE AGGREGATES,(Fineness Modulus (Sleve Analysis), Slit & Clay Contenet) |
| 21 | Laboratory testing charges - STEEL BAR TESTING,Upto 16 mm (Set of 3 Bars) |
| 22 | Laboratory testing charges - STONE / RUBBLE,Crushing Value / Compressive Strength, Water Absorption and Specific Gravity. |
| 23 | Add 1% Insurance |
| 24 | Add 18% G.S.T. |
AI Tender Summary
Tender Timeline
Oct 10, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedOct 17, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 19, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender