Military Engineer Services-MES has published Tender For Repair Replacement Of Water Supply Lines, Acs Fans And Certain Misc Works And Day To Day Petty Repair Works For B/R Nature For A Unit At Doom Dooma Under Ge Af Mohanbari. Submission Date for this Tender is 30-10-2023. Water Supply Project Tenders in Dibrugarh Assam. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.50 mtr deep for taking out/ laying of pipe and getting out in soft soil strata including making good to the disbturbed surfaces such as hardstanding, footpath/ pavments complete all as specified and directed. |
| 2 | Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25cm thick in any type of soil complete all as specified and directed. |
| 3 | Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed. |
| 4 | Taking up or down old GI/MS/CI/DI/PPR tubing of 100/110 mm bore dia and connections including cleaning for refixng (serviceable) or removal to store complete all as specified and directed. Note:- Excavation and earthwork shall be measured and paid separately under respective items. |
| 5 | All as per item No 4 above butbore of Pipe 80 mm dia GI pipe and 90mm dia PPR pipe. |
| 6 | All as per item No 4 above butbore of Pipe 50 mm dia GI pipe and 63mm dia PPR pipe. |
| 7 | All as per item No 4 above butbore of Pipe 25 mm dia GI pipe and 32mm dia PPR pipe. |
| 8 | Supply and laying 3 layer ( inner antimicrobial, outer UV stabilized) ISI marked ,IS-15801, PP-R pipes SDR 11(PN-10) and PP-R plain fittings laid in trenches/walls/ cellings or laying in floors of size 110 mm outer diaincluding all fittings complete all as specified and directed. |
| 9 | Supply and laying 3 layer ( inner antimicrobial, outer UV stabilized) ISI marked ,IS-15801, PP-R pipes SDR 11 (PN-10) and PP-R plain fittings in trenches/walls/cellings or laying in floors of size90 mm outer dia including all fittings complete all as specified and directed. |
| 10 | Supply and laying 3 layer ( inner antimicrobial, outer UV stabilized) ISI marked ,IS-15801, PP-R pipes SDR 11 (PN-10) and PP-R plain fittings in trenches/walls/cellings or laying in floors of size 63 mm outer diaincluding all fittings complete all as specified and directed. |
| 11 | Supply and laying 3 layer ( inner antimicrobial, outer UV stabilized) ISI marked ,IS-15801, PP-R pipes SDR 11 (PN-10) and PP-R plain fittings in trenches/walls/cellings or laying in floors of size 32 mm outer dia including all fittings complete all as specified and directed. |
| 12 | Supply & fixed in repairs PP-R Gate valves (brass insert) 110 mm outer dia of pipe complete all as specified and directed. |
| 13 | Supply & fixed in repairs PP-R Gate valves (brass insert) 90 mm outer dia of pipe complete all as specified and directed. |
| 14 | Supply & fixed in repairs PP-R Gate valves (brass insert) 63 mm outer dia of pipe complete all as specified and directed. |
| 15 | Supply & fixed in repairs PP-R Gate valves (brass insert) 32 mm outer dia of pipe complete all as specified and directed. |
| 16 | Supply and fix in repair 80 mm bore CI Sluice valve PN -1.6 with Spindle Iron (heavy duty) Wheel head and both ends flanged and MS nut bolts and washers and pair of rubber/ fiber gasket and fixed in position complete all as specified and directed. |
| 17 | All as per item Srl No. 16 above, but size 100 mm bore. |
| 18 | M&L for disconnecting of defective air compressor from the Pump house including motor of 3 phase, capacity upto 5HP and compressor alongwith PVC pipe including disconnection electrical connection as required and dismantling spare parts of Air Compressor of any size and motor overhauling and rewinding, greasing, testing and separating the unserviceable parts cleaning the serviceable parts, re-metalling machinery polishing and re-assembling including replacement of old parts and necessary spray paint with two coat of synethetic enamel paint over a coat of red oxide primer complete all as specified and directed. Note:- The old parts to be replaced in this item shall be measured and paid separately as "Supply only". |
| 19 | Supply only in repair/replacement following spare parts suitable for 3 phase, capacity upto 5HP air compressor:- |
| 20 | Piston for pump set |
| 21 | Piston oil ring |
| 22 | Liner |
| 23 | Bearing |
| 24 | Gear oil |
| 25 | Compressor air meter |
| 26 | Nozzle (Air) |
| 27 | Gate valve 1/2 inch |
| 28 | PVC nylon heavy duty pipe |
| 29 | Fan belt |
| 30 | Material and labour for construction of valve pit chamber ofinternal dimension 90 x 90x 90 cm with sub class "B" bricks in CM (1:4) and 10 mm thick plastering in CM (1:4), PCC (1:4:8), type D2 (using 40 mm graded broken stone aggregate) as in foundation lean concrete, PCC (1:3:6) type C1 (using 20 mm graded broken stone aggregate) as in bedding and copping, MS frame with 40 x 40 x 6 mm angle iron 5 mm thick MS sheet cover plate with locking arrangements, hinges and two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surface, three coats of white wash on plastered surface (exposed to view) including necessary excavation in soft/ loose soil, returning filling in and removal of surplus soil to a distance not exceeding 50 m complete including dismantling of oldcomplete all as specified and directed. |
| 31 | Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity 2.0TR complete all as specified and directed. |
| 32 | Taking down carefully aluminium/ copper point wiring (light, fan, socket, power point) including batten, conduit and fittings such as switches, ceiling rose, sockets, brackets, light fittings, switch board etc removing, making good distrubed surfaces of wall, floor, ceiling etc complete all as specified and directed. |
| 33 | M&L for point wiringwith 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor (FRLS) 1100 Volts grade cable (red colour cable to be used for phase connection and black colour cable to be used for neutral connection) including PVC casing capping with all accessories including 1.5 sqmm copper multistrand conductor (FRLS) 1100 Volts grade unsheathed PVC insulated (green colour) continuity earth wire connected to common earth dolly and sunk cast pressed steel terminal box made out of MS sheet for mounting of fittings like switch, socket and fan regulator with 3 mm thick hylum laminated sheet cover complete all as specified and directed for one Light/ Fan/ Bell point controlled by one switch. |
| 34 | S&F step type electronic fan regulator piano flush type230 volt, speed control and connecting up and fix in position complete all as specified anddirected. |
| 35 | S&F switch piano flush type 5/6 amps, 240 volt, single pole, one way complete all as specified and directed. |
| 36 | S&F ceiling rose 3 terminal/ PVC/ polycarbonate, isolated body, surface type complete all as specified and directed. |
| 37 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 38 | M&L in repair for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through & including PVC casing-caping medium grade complete all as specified and directed. |
| 39 | S&F in repair of sheet metal enclosure, single pole and neutral with two pin and earth plug and socket, 20 Amps, 230 Volts, 50 Hz complete with one single pole MCB of 20 Amps, 10 KA, 230 volts, 50Hz, C curve type complete all as specified and directed. |
| 40 | Supply and fix LED street light 45 W with minimum lumen of 4500Lm, PF >0.95 new generation energy saving and environmental friendly long life made up of pressure diecast aluminium housing with high power LED as lighting source cover having driver compartment with IP66 protection and impact resistance with built-in surge protection device suitable for mounting for pole complete including taking down of old complete all as specified and diected.Make : Crompton/ Philips/ GE. |
| 41 | Supply and fix LED street light60 W with minimum lumen of 6000Lm, PF >0.95 new generation energy saving and environmental friendly long life made up of pressure die cast aluminium housing with high power LED as lighting source cover having driver compartment with IP66 protection and impact resistance with built-in surge protection device suitable for mounting for pole complete including taking down of old complete all as specified and diected.Make : Crompton/Philips/ GE. |
| 42 | S&F inverter of pure sine wave capacity 1100VA/12Vwith and including 180Ah/12V battary with LCD display for showing the battary performance statistics and trolley for mounting including installation and testing complete all as specified and directed. |
| 43 | Supply and fix in repair of industrial heavy duty wall mounted fan, steel body AC single Phase. 230V of size 600m sweep with, blades, and frame with provision of ossilation of 60 degree and provision of pull cord for speed and oscillation control with min 1400 RPM and air delivery of 280 CMM complete all as specified and directed. |
| 44 | Attending day to day complaints related to joinery work such as repairs to cupboard, kitchen shelves, pelmet box, easing of doors and windows, kitchen knobs, tighting of wire mess, glass, easing of door tightening door /window easing of door shutter etc including taking down of existing material as ordered/required on all working day to attend the complaint cell by rep of contractor at 0900 AM and report to complaint cell at every evening at 0500 PM on daily basis after satisfactory completion,complete all as specified and directed. Material such as nails,screws, washers, putty/beading for glass / wiremesh, nut & bolts etc as per site requirement shall be included in the the quoted rate. Note:-(i)The above task shall be carried out by deploying Minimum 01 No Carpenter & 01 No Helper on daily basis. (ii) The complaint against docket shall be taken from MES Complaintcell at every morning at 0900 AM by rep of contractor on daily basis. (iii) Every docket will submit at complaint cell of daily basis on same day at 0500 PM or early morning on next day after satisfacotry completion. (iv) Necessary T&P, equipment and safety gear shall be provided by the contractors. (v)Rs. 130.00/complaint shall be recovered against non attending of every complaints within 24 Hours. (vi) Material will be measured and paid separatly under respective items as supply only.However quoted rate for fixing of the same shall be deemed to be included in this item. |
| 45 | Attending day to day complaints related to water supply & plumbing work only such as leakage of bib cock/pillar cock/ stop cock angle valve of any description changing the washers, cleaning of air lock in the pipe, leaking low level or high level flushing cistern by adjusting the float valve and including removal/taking down of existing material or for refixing of same or replacement of rubber washer in PVCsyphons/bath fittings and adjusting the float valve of over head tanks and leaking PVC bends/galvanised iron pipes etc as per site requirement on all working day to attend the complaint cell by rep of contractor at 0900AM and report to complaint cell at same day at 0500 PM on daily basis after satisfactory completion, complete all as specified and directed. Material such as threads, washers, lead, solvent cement to join PVC pipes etc shall be included in the quoted rate. Note :- (i) The above task shall be carried out by deploying Minimum 01 No Plumber & 01 No Helper on daily basis. (ii) The complaint against docket shall be taken from MES Complaint cell at every morning at 0900 AM by rep of contractor on daily basis. (iii) Every docket will submit at complaint cell on daily basis of same day at 0500 PM or early morning on next day after satisfacotry completion. (iv) Necessary T&P, equipment and safety gear shall be provided by the contractors. (v)Rs. 130.00/complaint shall be recovered against non attending of every complaints within 24 Hours. (vi) Material will be measured and paid separatly under respective items as supply only.However quoted rate for fixing of the same shall be deemed to be included in this item. |
| 46 | Attending day to day complaints related to masonary work only such as repairs to Brick / PCC Block Work, Plastering, Finishes, Flooring, PCC / RCC Repair Work, Hardstanding, Path etc including demolition & dismanteling as per site requirement on all working day to attend the complaint cell by rep of contractor at 0900AM and report to complaint cell at same day at 0500 PM on daily basis after satisfactory completion, complete all as specified and directed. Material such as sponge etc shall be included in the quoted rate. Note :- (i) The above task shall be carried out by deploying Minimum 01 No Mason & 01 No Helper on daily basis. (ii) The complaint against docket shall be taken from MES Complaint cell at every morning at 0900 AM by rep of contractor on daily basis. (iii) Every docket will submit at complaint cell on daily basis of same day at 0500 PM or early morning on next day after satisfacotry completion. (iv) Necessary T&P, equipment and safety gear shall be provided by the contractors. (v)Rs. 130.00/complaint shall be recovered against non attending of every complaints within 24 Hours. (vi) Material will be measured and paid separatly under respective items as supply only.However quoted rate for fixing of the same shall be deemed to be included in this item. |
| 47 | Supply only 6 mm thick plywood, graded BWR, type BB complete all as specified and directed. |
| 48 | Supply onlySteel Plate Rack of 600x 900 x 250 MM complete all as specified and directed. |
| 49 | Supply only25 mm dia curtain rod, mild steel, powder coated decorative type complete all as specified and directed. |
| 50 | Supply only25 mm dia decorative type brackets, mild steel, powder coated complete all as specified and directed. |
| 51 | Supply only Galvanised steel wire cloth. 0.63 mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed. |
| 52 | Supply only 4 mm thick sheet glass ordinary quality, in square or reqd shape n exc 0.50 Sqm each complete all as specified and directed. |
| 53 | Supply only 4 mm thick figured glass pin headed type in square or reqd shape n exc 0.50 Sqm each complete all as specified and directed. |
| 54 | Supply only 150mm long Aluminium Anodised, Barrel tower bolts of extruded section complete all as specified and directed. |
| 55 | Supply only 200mm long Aluminium Anodised, Barrel tower bolts of extruded section complete all as specified and directed. |
| 56 | Supply only 300mm long Aluminium Anodised, Barrel tower bolts of extruded section complete all as specified and directed. |
| 57 | Supply only 100mm long Aluminium Anodised, handel, caste type complete all as specified and directed. |
| 58 | Supply only 150mm long Aluminium Anodised, handel, caste type complete all as specified and directed. |
| 59 | Supply only 100mm Hasp and staple, safety type, aluminium anodisedwith mild steel hinge pin including bolt to hinge plate complete all as specified and directed. |
| 60 | Supply only 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright powder coated complete all as specified and directed. |
| 61 | Supply only 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. |
| 62 | Supply only Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 63 | Supply only 100mm Butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 64 | Supply only 100mm Gate and shutter, hooks and eyes Aluminium plate type-II complete all as specified and directed. |
| 65 | Supply only Aluminium Anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 66 | Supply only 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed. |
| 67 | Supply only 16mm C-PVC pipes complete all as specified and directed. |
| 68 | Supply only 20mm C-PVC pipes complete all as specified and directed. |
| 69 | Supply only 25mm C-PVC pipes complete all as specified and directed. |
| 70 | Supply only 20mm & under India rubber washers for bib tap / pillar taps etc complete all as specified and directed. |
| 71 | Supply only 15 mm bore fancy type Bib taps, chromium plated, cast copper alloy with crutch or butterfly handle complete all as specified and directed. |
| 72 | Supply only 15 mm bore fancy Type Pillar taps, chromium plated, cast copper alloy, with capstan heads complete all as specified and directed. |
| 73 | Supply only 15 mm bore fancy Type Stop valves / Angle valve, chromium plated, cast copper alloy with crutch or butterfly handle complete all as specified and directed. |
| 74 | Supply only Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook complete all as specified and directed. |
| 75 | Supply only 15mm Gun-metal, globe or gate valves, with iron wheel head complete all as specified and directed. |
| 76 | Supply only 20mm Gun-metal, globe or gate valves, with iron wheel head complete all as specified and directed. |
| 77 | Supply only 25mm Gun-metal, globe or gate valves, with iron wheel head complete all as specified and directed. |
| 78 | Supply only 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball. (Minimum weight 20mm-210gms) complete all as specified and directed. |
| 79 | Supply only 25mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball. (Minimum weight 25mm-455gms) complete all as specified and directed. |
| 80 | Supply only Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 81 | Supply only 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 82 | Supply only 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 83 | Supply only Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 84 | Supply only 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts complete all as specified and directed. |
| 85 | Supply only 40mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts complete all as specified and directed. |
| 86 | Supply only PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 87 | Supply onlyCP Grating doom 125 mm dia(minimum wt 40grms) complete all as specified and directed. |
| 88 | Supply only water tank cover for tanks of size 500 ltr or 1000 ltrs capacity water storage tank complete all as specified and directed. |
| 89 | Supply only 32mm dia PVC waste pipe (LDEP) for wash basin and kitchen sink / Urinals complete all as specified and directed. |
| 90 | Supply only 40mm dia PVC waste pipe (LDEP) for wash basin and kitchen sink / Urinals complete all as specified and directed. |
| 91 | Supply only" flushing cistern kit" for complete set to fitted inside as per requirement for cistern functional complete all as specified and directed. |
| 92 | Supply only Spindle suitable for Bib Tap / Stop valve / Angle Cock / Pillar Tap complete all as specified and directed. |
| 93 | Supply only 16mm C- PVC pipes fittings such as elboe, socket, Nipple, Tee & reducer etc complete all as specified and directed. |
| 94 | Supply only 20mm C- PVC pipes fittings such as elboe, socket, Nipple, Tee & reducer etc complete all as specified and directed. |
| 95 | Supply only 25mm C- PVC pipes fittings such as elboe, socket, Nipple, Tee & reducer etc complete all as specified and directed. |
| 96 | Supply onlyOrdinary Portland Cement (43 Grade) or Portland Pozzolana Cement (50 Kg Bag) complete all as specified and directed. |
| 97 | Supply onlyFine Aggregate (Sand) complete all as specified and directed. |
| 98 | Supply only 20mm Graded Coarse Aggregate complete all as specified and directed. |
| 99 | Supply only 40mm Graded Coarse Aggregate complete all as specified and directed. |
| 100 | Material and labour laying well burnt old sizebricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
