Military Engineer Services-MES has published Tender For Repair / Maintenance Of Dg Set, Amf Panel, Lt Panel And Allied Works In Labs Under Zone B At Kwc Area And Repair / Maint Of External Electrification, Maint Of Transformer, Vcb And Lt Ug Cable And Allied Works In Dipas, Dipr Under . Submission Date for this Tender is 04-11-2023. Electrification Work Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 28-Oct-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 04-11-2023 |
| Sl. No. | Item Description |
| 1 | Attending urgent complaints of 15 to 437.5 KVA DG setsunder Zone-B at KWC area on call basis immediatelyby OEM ONLY, issues may be due to fault in AMFpanels, ACB of DG panel , auxillary relays fault, DG control software unit fault, overload, batterydischarge, earth fault, neutral fault, radiator issues, DG set fuse unsv or any other fault not mentioned in this item will be attendedby OEM of respective DG sets including replacement of defective &worn out partsby new spares complete all as specified and directed. Note : - Spares parts will be measured and paid separately under relevent items. |
| 2 | Maintenance / Servicingto DG sets of 15 to 437.5 KVA by OEM for respective DG sets will be carried out once in a monthincluding replacement of unsv partsby new spares such as filters, gaskets, V belts,Engine oil, rubber hoses, worm drive clamps, nut bolts and cleaning of alternator with vaccum cleaner and attending faults of AMFpanels etc and greasing of bearings of engine and alternator, checking of batteries, adding distilled water, checking of oil and coolant levelscomplete all as specified and directed. Note :- Spares required for above maintenance will be measured and paid separately under relevant item and Servicing to be carried out as per manufacturer"s instructions. |
| 3 | S&F in repair newPVC insulated multisranded , copper conductor single core 70 Sqmm multistranded of 1.25 mtr long each duly fixed with brass clamps, copper lugs suitable for DG sets installed at different locations from battery to starter as battery leads complete all as specified and directed. |
| 4 | Supply only engine oil, multi grade suitable for DG set complete all as specified and directed. Make :- Indian oil / Hindustan petroleum / Castrol / BPCL. |
| 5 | Supply and filing of coolent complete all as specified and directed. |
| 6 | Supply only Petroleum jelly.(1/2 kg plastic sealed container) complete all as specified and directed. |
| 7 | Supply and fill in batteries distilled water for topping up complete all as specified and directed. |
| 8 | M&L for repairing of battery charging alternator engine mounted with replacement of any of the unserviceable part such as rectifier with voltage regulator, diode plate, carbon brushes for the following capacities complete all as specified and directed :- |
| 9 | 24 volts capacity |
| 10 | 12 volts capacity |
| 11 | S&F in repairbattery charging circuit suitable for 12 V,DC in existing DG set panel board including addition/ alteration in wiring system complete with auto transformer, diodes, filter circuit, condensers, DC Ammeter, DC volt meter with selector switches and indicating bulbs etc complete all as specified and directed. |
| 12 | S&F in repair battery charging circuit suitable for 24 V,DC in existing DG set panel board including addition alteration in wiring system complete with auto transformer, diodes, filter circuit, condensers, DC Ammeter, DC volt meter with selector switches and indicating bulbs etc complete all as specified and directed. |
| 13 | S&F in repair Water temperature gauge including sensor and cable complete as per sample. complete all as specified and directed. |
| 14 | S&F in repairCT cast resin typeof ratio 200/5 amps, of suitable VA burden, complete all as specified and directed. |
| 15 | S&F in repairCT cast resin typeof ratio 100/5 amps, of suitable VA burden, complete all as specified and directed. |
| 16 | S&F in repair Power contactor 415v, 50Hz, AC suitable for following DG set Control panel/AMF Panels for the following capacities complete all as specified and directed. |
| 17 | D. G . Set 15 to 20 KVA |
| 18 | D. G . Set 30 to 62.5 KVA |
| 19 | D. G . Set 160 KVA |
| 20 | D. G . Set 320 KVA |
| 21 | D. G . Set 437.5 KVA |
| 22 | S&F in repair Time delay relay suitable for15 to 437.5 KVA DG Set complete all as specified and directed. |
| 23 | M&L for tappet setting of following capacities of DG sets complete all as specified and directed:- |
| 24 | D. G . Set 15 to 20 KVA |
| 25 | D. G . Set 30 to 62.5 KVA |
| 26 | D. G . Set 160 KVA |
| 27 | D. G . Set 320 KVA |
| 28 | D. G . Set 437.5 KVA |
| 29 | Supply only diesel filter element with O ring,suitable for following capacities of DG sets complete all as specified and directed :- |
| 30 | D. G . Set 15 to 20 KVA |
| 31 | D. G . Set 30 to 62.5 KVA |
| 32 | D. G . Set 160 KVA |
| 33 | D. G . Set 320 KVA |
| 34 | D. G . Set 437.5 KVA |
| 35 | Supply only oil filter element with O ring, suitable for following capacities of DG sets complete all as specified and directed :- |
| 36 | D. G . Set 15 to 20 KVA |
| 37 | D. G . Set 30 to 62.5 KVA |
| 38 | D. G . Set 160 KVA |
| 39 | D. G . Set 320 KVA |
| 40 | D. G . Set 437.5 KVA |
| 41 | Supply only by pass filter element with O ring suitable for following capacities of DG sets complete all as specified and directed :- |
| 42 | D. G . Set 15 to 20 KVA |
| 43 | D. G . Set 30 to 62.5 KVA |
| 44 | D. G . Set 160 KVA |
| 45 | D. G . Set 320 KVA |
| 46 | D. G . Set 437.5 KVA |
| 47 | Supply only air filter element suitable for following capacities of DG sets complete all as specified and directed :- |
| 48 | D. G . Set 15 to 20 KVA |
| 49 | D. G . Set 30 to 62.5 KVA |
| 50 | D. G . Set 160 KVA |
| 51 | D. G . Set 320 KVA |
| 52 | D. G . Set 437.5 KVA |
| 53 | Supply onlyfan belt suitable for following capacities of DG sets complete all as specified and directed :- |
| 54 | D. G . Set 15 to 20 KVA |
| 55 | D. G . Set 30 to 62.5 KVA |
| 56 | D. G . Set 160 KVA |
| 57 | D. G . Set 320 KVA |
| 58 | D. G . Set 437.5 KVA |
| 59 | Supply only belt for battery charging alternator for following capacities of DG sets complete all as specified and directed :- |
| 60 | D. G . Set 15 to 20 KVA |
| 61 | D. G . Set 30 to 62.5 KVA |
| 62 | D. G . Set 160 KVA |
| 63 | D. G . Set 320 KVA |
| 64 | D. G . Set 437.5 KVA |
| 65 | Supply only rubber hose pipe set for water circuit complete with clamps, suitable for following capacities of DG sets complete all as specified and directed :- |
| 66 | D. G . Set 15 to 20 KVA |
| 67 | D. G . Set 30 to 62.5 KVA |
| 68 | D. G . Set 160 KVA |
| 69 | D. G . Set 320 KVA |
| 70 | D. G . Set 437.5 KVA |
| 71 | M&L forDismantling of radiator , taking it to work shop for overhauling & cleaning, descaling with acid, removal of leakage, welding brazing & refixing it duly repaired etc for following capacity of DG Sets complete all as specified and directed:- |
| 72 | D. G . Set 15 to 20 KVA |
| 73 | D. G . Set 30 to 62.5 KVA |
| 74 | D. G . Set 160 KVA |
| 75 | D. G . Set 320 KVA |
| 76 | D. G . Set 437.5 KVA |
| 77 | Calibration of FIP and injectors from the authorised dealer including petty repairs to makethe FIP functional for the following capacities of DG sets including necessary spares required for smooth functioning of FIP complete all as specified and directed:- |
| 78 | D. G . Set 15 to 20 KVA |
| 79 | D. G . Set 30 to 62.5 KVA |
| 80 | D. G . Set 160 KVA |
| 81 | D. G . Set 320 KVA |
| 82 | D. G . Set 437.5 KVA |
| 83 | M&L for overhauling of self starter incl. replacement of carbon brushes, bearing, bushes, rewinding of armature and field etc. and varnishing for the following capacity complete all as specified and directed:- |
| 84 | 24 Volts make- Lucas or as per generator |
| 85 | 12 Volts Make-Lucas or as per generator |
| 86 | Preparation of old painted surfaces of the DG Set including radiator, fuel tank etc of the following capacities complete degreasing and spray painting the same with two coats of approved synthetic enamel paint of approved shade including writing SM/MES nos on DG set complete all as specified and directed:- |
| 87 | D. G . Set 15 to 437.5 KVA |
| 88 | S&F in repair automatic voltage regulator up to 160 KVADG set with facility of auto / manual mode as per existing capacity and make suitable for DG sets complete as per existing DG sets complete all as specified and directed. |
| 89 | S&F in repair automatic voltage regulator above 320 to 437.5 KVADG set complete as per existing DG sets complete all as specified and directed. |
| 90 | S&F in repair fuel steel braided pipe with benjo bolts and washers etc complete of length upto 30cm long complete all as specified and directed. |
| 91 | S&F in repair fuel steel braided pipe with benjo bolts and washers etc complete of length 30 to 45cm long complete all as specified and directed. |
| 92 | S&F in repair fuel steel braided pipe with benjo bolt and washers etc complete of length 45 to 60cm long complete all as specified and directed. |
| 93 | S&F in repair control wiring of the DG set up to 160 KVA complete incl provision of additional auto cables heavy duty suitable for Gen set application complete all as specified and directed. |
| 94 | S&F in repair control wiring of the DG set above 320KVA up to 437.5 KVA complete incl provision of additional auto cables heavy duty suitable for Gen set application complete all as specified and directed. |
| 95 | S&F in repair pressure guage 0 to 7 Kg/sqcm along with sensor and cable complete all as specified and directed. |
| 96 | S&F in repair lead acid battery 12 Volts 180 AH with initial charging and having indicators to know the status of level of electrolyte complete all as specified and directed. |
| 97 | S&F in repair lead acid battery 12 Volts 150 AH with initial charging and having indicators to know the status of level of electrolyte complete all as specified and directed. |
| 98 | M&L for Top Overhauling only of DG set of followingcapacity of any make and including replacement of all spare parts required to complete the work complete all as specified and directed:- |
| 99 | D. G. Set 15 to 20 KVA |
| 100 | D. G. Set 30 to 62.5 KVA |
| 101 | D. G. Set 160 KVA |
| 102 | D. G. Set 320 KVA |
| 103 | D. G. Set 437.5 KVA |
| 104 | Supply only Oil Sump packing set suitable for following DG sets complete all as specified and directed:- |
| 105 | D. G . Set 15 to 20 KVA |
| 106 | D. G . Set 30 to 62.5 KVA |
| 107 | D. G . Set 160 KVA |
| 108 | D. G . Set 320 KVA |
| 109 | D. G . Set 437.5 KVA |
| 110 | S&F in replacement solinoid valve suitable for following capacity DG sets for smooth functioningcomplete all as specified and directed:- |
| 111 | D. G . Set 15 to 20 KVA |
| 112 | D. G . Set 30 to 62.5 KVA |
| 113 | D. G . Set 160 KVA |
| 114 | D. G . Set 320 KVA |
| 115 | D. G . Set 437.5 KVA |
| 116 | S&F in replacement microprocessor based multifunction relay suitable for DG sets operation and showing the various parameters such as Volt, ampere, frequency, rpm etc as per existing make and sample suitable for upto 62.5 KVA DG sets etc complete all as specified and directed. |
| 117 | S&F in replacement microprocessor based multifunction relay suitable for DG sets operation and showing the various parameters such as Volt, ampere, frequency, rpm etc as per existing suitable for 160 KVA DG sets etc complete all as specified and directed. |
| 118 | S&F in replacement microprocessor based multifunction relay suitable for DG sets operation and showing the various parameters such as Volt, ampere, frequency, rpm etcas per existing suitable for 320 KVA DG sets etc complete all as specified and directed. |
| 119 | S&F in replacement microprocessor based multifunction relay suitable for DG sets operation and showing the various parameters such as Volt, ampere, frequency, rpm etcas per existing suitable for 437.5 KVA DG sets etc complete all as specified and directed. |
| 120 | S&F in repair battery terminal made out of brass/bronze heavy duty suitable for 150 AH/180 AH 12 Volt Battery complete all as specified and directed. |
| 121 | S&F in repair self starter for engine of DG Set upto 62.5 KVAof existing make complete with all connections and all accessories including all fitting complete all as specified and directed. |
| 122 | S&F in repair self starter for engine of DG Set 160KVAof existing make complete with all connections and all accessories including all fitting complete all as specified and directed. |
| 123 | S&F in repair self starter for engine of DG Set 320KVAof existing make complete with all connections and all accessories including all fitting complete all as specified and directed. |
| 124 | S&F in repair self starter for engine of DG Set 437.5KVAof existing make complete with all connections and all accessories including all fitting complete all as specified and directed. |
| 125 | M&L in repair AMF panel of DG set 15 KVA to 62.5 KVA including replacement ofwiring of interlock system of AMF panel with suitable size of copper wiring including proper connection and testing complete all as specified and directed. |
| 126 | M&L in repair AMF panel of DG set 62.5 KVA to 160 KVA including replacement ofwiring of interlock system of AMF panel with suitable size of copper wiring including proper connection and testing complete all as specified and directed. |
| 127 | M&L in repair AMF panel of DG set 320 KVA to 437.5 KVA including replacement ofwiring of interlock system of AMF panel with suitable size of copper wiring including proper connection and testing complete all as specified and directed. |
| 128 | S&F in replacement of Electronic timer suitable for AMF panel of DG set 62.5 KVA to 100 KVA as per matching to exisitng, 230 V AC 50 Hz complete all as specified and directed. |
| 129 | S&F in replacement of Electronic timer suitable for AMF panel of DG set 160 KVA as per matching to exisitng, 230 V AC 50 Hz complete all as specified and directed. |
| 130 | S&F in replacement of Electronic timer suitable for AMF panel of DG set 320 KVA as per matching to exisitng, 230 V AC 50 Hz complete all as specified and directed. |
| 131 | S&F in replacement of Electronic timer suitable for AMF panel of DG set 437.5 KVA as per matching to exisitng, 230 V AC 50 Hz complete all as specified and directed. |
| 132 | Supply and Cladding with glass/rock wool and aluminium sheets of exhaust manifoldforfor DG sets 15 to 62.5 KVA includung removing of existing asbestos rope or any other type of insulation complete all as specified and directed. |
| 133 | Supply and Cladding with glass/rock wool and aluminium sheets of exhaust manifoldforfor DG sets 70 to 160 KVA includung removing of existing asbestos rope or any other type of insulation complete all as specified and directed. |
| 134 | Supply and Cladding with glass/rock wool and aluminium sheets of exhaust manifoldforfor DG sets 200 to 320 KVA includung removing of existing asbestos rope or any other type of insulation complete all as specified and directed. |
| 135 | Dismantling the fuel pump from the Engine of capacity 15 to 20 KVA ,transportng to the service center and complete servicing and overhauling of the pump including replacement of service kit ,element, delivery valve,plunger,copper washer etc all as required including re-calibration,refixing and testing complete all as specified and directed. |
| 136 | Dismantling the fuel pump from the Engine of capacity 62.5 to 100 KVA ,transportng to the service center and complete servicing and overhauling of the pump including replacement of service kit ,element, delivery valve,plunger,copper washer etc all as required including re-calibration,refixing and testing complete all as specified and directed. |
| 137 | Dismantling the fuel pump from the Engine of capacity 160 KVA ,transportng to the service center and complete servicing and overhauling of the pump including replacement of service kit ,element, delivery valve,plunger,copper washer etc all as required including re-calibration,refixing and testing complete all as specified and directed. |
| 138 | Dismantling the fuel pump from the Engine of capacity 320 to 437.5 KVA ,transportng to the service center and complete servicing and overhauling of the pump including replacement of service kit ,element, delivery valve,plunger,copper washer etc all as required including re-calibration,refixing and testing complete all as specified and directed. |
| 139 | M&L for draining out the diesel tank, cleaning/washing out the sludge and re-filling with diesel for the DG Set of capacity 15 to 20 KVA complete all as specified and directed. |
| 140 | M&L for draining out the diesel tank, cleaning/washing out the sludge and re-filling with diesel for the DG Set of capacity 62.5 to100 KVA complete all as specified and directed. |
| 141 | M&L for draining out the diesel tank, cleaning/washing out the sludge and re-filling with diesel for the DG Set of capacity 160 KVA complete all as specified and directed. |
| 142 | M&L for draining out the diesel tank, cleaning/washing out the sludge and re-filling with diesel for the DG Set of capacity 320 KVA complete all as specified and directed. |
| 143 | M&L for draining out the diesel tank, cleaning/washing out the sludge and re-filling with diesel for the DG Set of capacity 437.5 KVA complete all as specified and directed. |
| 144 | M&L in replacement of turbo chargers repairs kit suitable for DG set 62.5 to 100 KVA complete all as specified and directed. |
| 145 | M&L in replacement of turbo chargers repairs kit suitable for DG set 160 KVA complete all as specified and directed. |
| 146 | M&L in replacement of turbo chargers repairs kit suitable for DG set 200 to 450 KVA complete all as specified and directed. |
| 147 | M&L for B checkby authorised rep of manufacturer of DG set ofcap 437.5 kva including replacement of oil filter, fuel filter, air filter after draining out engine/lubricant oil flushing and cleaning of oil chamber after opening of tappet cover/top cover tappet cleaning setting with injector timing adjustment refixing of tappet/top cover including replacement of tappet cover packing set, bonding and leak proof sollution, oil pan/chamber gasket at the servicing and other work comes under B check complete all as specified and directed. Note:- Engine oil will be paid separately. |
| 148 | M&L for B checkby authorised rep of manufacturer of DG set ofcap 320 kva including replacement of oil filter, fuel filter, air filter after draining out engine/lubricant oil flushing and cleaning of oil chamber after opening of tappet cover/top cover tappet cleaning setting with injector timing adjustment refixing of tappet/top cover including replacement of tappet cover packing set, bonding and leak proof sollution, oil pan/chamber gasket at the servicing and other work comes under B check complete all as specified and directed. Note:- Engine oil will be paid separately. |
| 149 | M&L for B checkby authorised rep of manufacturer of DG set ofcap 160 kva including replacement of oil filter, fuel filter, air filter after draining out engine/lubricant oil flushing and cleaning of oil chamber after opening of tappet cover/top cover tappet cleaning setting with injector timing adjustment refixing of tappet/top cover including replacement of tappet cover packing set, bonding and leak proof sollution, oil pan/chamber gasket at the servicing and other work comes under B check complete all as specified and directed. Note:- Engine oil will be paid separately. |
| 150 | Materials and labour for B checkby authorised rep of manufacturer of DG set ofcap 15 to 62.5 kva including replacement of oil filter, fuel filter, air filter after draining out engine/lubricant oil flushing and cleaning of oil chamber after opening of tappet cover/top cover tappet cleaning setting with injector timing adjustment refixing of tappet/top cover including replacement of tappet cover packing set, bonding and leak proof sollution, oil pan/chamber gasket at the servicing and other work comes under B check complete all as specified and directed. Note:- Engine oil will be paid separately. |
| 151 | M&L for bringing Cable testing van (Fault Finder) for detecting the location of fault in the LT UG cable 1.1 KV and HT UG Cable 11 KV grade of any size complete all as specified and directed. |
| 152 | S&F in replacement ON load change over switch 440 volts 4 pole of rating 400 amps with encloser fixed on wall/ panel including nut/bolts/washers complete all as specified and directed. |
| 153 | M& L for Servicing /Caliberation / Repairs toAir Circuit Breaker 800 to 1600 Amps by OEM of ACB only for EDO ( Electrically Draw Out) type/ MDO type(Mannually Draw out type)/ Fixed type. Taking out any type of ACBfor servicing / repair and checking / caliberation ofmicroprocessor release,Earth fault protection of 4 pole, 50 KA breaking capacity 415 volts with all draw out type mechanism, advanced self powered electronic protection units, neutral overload protection, automatic earth fault relay / over current relay , automatic safety shutter, inbuilt temperature protection, icu=ics=icw(1s)=50 KAfixed in panel complete including relay wiring checking ,LT UG cable connection with main incoming ACB complete connection for its healthy functioningcomplete all as specified and directed. Note :- Certificate of Servicing /Caliberation will be provided by the contractor free of cost. |
| 154 | S&F in repair protection releases for air circuit breakerssuitable for existing breakers as per site make / requirement including taking out breakers after taking shutdown of electric supply complete all as specified and directed. |
| 155 | S&F in repair earth fault realease for air circuit breakerssuitable for existing breakers as per site make / requirement including taking out breakers after taking shutdown of electric supply complete all as specified and directed. |
| 156 | S&F in repair shunt realease for air circuit breakers suitable for existing breakers as per site make / requirement including taking out breakers after taking shutdown of electric supply complete all as specified and directed. |
| 157 | S&F in repair under voltage realease for air circuit breakerssuitable for existing breakers as per site make / requirement including taking out breakers after taking shutdown of electric supply complete all as specified and directed. |
| 158 | S&F in repair lockable trip push button for air circuit breakerssuitable for existing breakers as per site make / requirement including taking out breakers after taking shutdown of electric supply complete all as specified and directed. |
| 159 | S&F in replacement of selector switch suitable for voltmeter and Ammeter complete all as specified and directed. |
| 160 | S&F in replacement of under voltage relay suitable for DG set of capacity 62.5 KVA to 160 KVA complete all as specified and directed. |
| 161 | S&F in replacement of under voltage relay suitable for DG set of capacity 320 to 437.5 KVA complete all as specified and directed. |
| 162 | Attending the fault in APFC panel including repairing of APFC relay, Contactor of any make/capacity, digital lamp,switch and setting the APFC panel relay OEM for proper function, testing connection of capacitor bank of any capacity including replacement of small parts below Rs 500/- .repairing and blowing out dust from inside the APFC panel complete all as specified and directed. |
| 163 | S&F in repair APFC controller 8 step for automatic correction of power factor suitable for 415 volt 3 phase power supply complete with necessary fixing complete all as specified and directed. Make- L&T Cat no-ETACONM008R or equivalent in ABB/siemens as approved. |
| 164 | S&F in repairs digital voltmeter 0-500 volts square type complete with necessary fixing and 3 nos of CTs complete all as specified and directed. |
| 165 | S&F in repairs digital ammeter 0-400 amps square type complete with necessary fixing and 3 nos of CTs complete all as specified and directed. |
| 166 | S&F in repair Capacitor duty Contactors suitable for upto 10 KVAR capacitor bank complete all as specified and directed. |
| 167 | S&F in repair Capacitor duty Contactors suitable for upto 25 KVAR capacitor bank complete all as specified and directed. |
| 168 | S&F in repair cable PVC insulated 3 core 2.5 Sqmm with stranded copper conductor 1100V grade from socket/switch to geyser complete all as specified and directed. |
| 169 | S&F in replacement of PVC insulated flexible copper conductor cable 1100 volts grade, 3 core of size 1.5 Sqmm complete all all as specified and directed. |
| 170 | Design, supply,install, testingand comissioning of free standing floor mounted, dust and vermin proof Panel of suitable sizefor out door installation factory made both front and rear side double door system, fabricated with 3.15 mm thick CRCA sheet for load bearing members and 2 mm thick for doors and covers and shall be painted witrh epoxy powder paint by means of electro static gun after rigorous pre treatment comprising of cold phosphating process on all internal and external surfaces after due preparation of surfaces. The panel shall consist of 600 ,Amps rating TPN bus bars of high conductivity aluminium alloy and shall be provided with colour coded heat shrinkaable sleeves,with 600 mm depth of the panel. The panel shall be modular/cubical typewith bus chamber cable ally and provided with separate fully compartments for each switch including instrumentation such as Ampere Meter, Volt meter, Phase indicating lampwith double stud hinged door , front and rear openablewith locking arrangement and suitable for 1100 Volts grade , 3 phase 415 Volts , 50 cycles , AC Supply and to with stand short circuit fault level of not less than 10 KA and degree of protection shall be IP 54 . The panel shall be fixed with angle iron frame made of angles of size 50x50x6 mm , embedded 200 mm below ground levelin PCC 1:2:4, TypeB1 using 20 mm grade stone aggregate , 600 mm above ground level and comprising the following including taking out of old panels etc , removing of cables and connecting to new panels with all required material such as glands, lugs etc complete all as specified and directed:- |
| 171 | INCOMING :- (a) MCCB 4 pole 400 Amps, rup cap 36 KA at 415 volt 50 Hz ACfixed thermal magnetic release type and earth leakage protection ICS =100% ICUwith rotary handle- 01 No incoming OUTGOING :- (a) MCCB 4 pole 250 Amps, rup cap 25 KA at 415 volt 50 Hz AC, fixed thermal magnetic release type with rotary handle- 01 Nos Out going (b) MCCB 4 pole125 Amps, rup cap 16 KA at 415 volt 50 Hz AC, fixed thermal magnetic release type with rotary handle- 01 Nos Out going (c) MCCB 3 pole 63 Amps, rup cap 16 KA at 415 volt 50 Hz AC, fixed thermal magnetic release type with rotary handle- 02 Nos Out going (d) LT Danger notice plate -01 No (e) Panel Control wiring complete with suitable size copper conductor cable and suitable size gland for LT cables |
| 172 | Design, supply,install, test and comissioning of free standing floor mounted, dust and vermin proof LT Panel of suitable sizefor out door installation factory made both front and rear side double door system, fabricated with 3.15 mm thick CRCA sheet for load bearing members and 2 mm thick for doors and covers and shall be painted witrh epoxy powder paint by means of electro static gun after rigorous pre treatment comprising of cold phosphating process on all internal and external surfaces after due preparation of surfaces. The panel shall consist of 600 ,Amps rating TPN bus bars of high conductivity aluminium alloy and shall be provided with colour coded heat shrinkaable sleeves,with 600 mm depth of the panel. The panel shall be modular/cubical typewith bus chamber cable ally and provided with separate fully compartments for each switch including instrumentation such as Ampere Meter, Volt meter, Phase indicating lampwith double stud hinged door , front and rear openablewith locking arrangement and suitable for 1100 Volts grade , 3 phase 415 Volts , 50 cycles , AC Supply and to with stand short circuit fault level of not less than 10 KA and degree of protection shall be IP 54 . The panel shall be fixed with angle iron frame made of angles of size 50x50x6 mm , embedded 200 mm below ground levelin PCC 1:2:4, TypeB1 using 20 mm grade stone aggregate , 600 mm above ground level and comprising the following including taking out of old panels etc , removing of cables and connecting to new panels with all required material such as glands, lugs etc complete all as specified and directed:- |
| 173 | INCOMING :- (a) MCCB 4 pole, 400 Amps, rup cap 36 KA at 415 volt 50 Hz ACfixed thermal magnetic release type and earth leakage protection ICS =100% ICUwith rotary handle- 01 No incoming OUTGOING :- (a) MCCB 4 pole 200 Amps, rup cap 25 KA at 415 volt 50 Hz AC, fixed thermal magnetic release typewith rotary handle- 02 Nos Out going (b) MCCB 3 pole100 Amps, rup cap 16 KA at 415 volt 50 Hz AC, fixed thermal magnetic release type with rotary handle- 02 Nos Out going (c) MCCB 3 pole 63 Amps,rup cap 16 KA at 415 volt 50 Hz AC, fixed thermal magnetic release type with rotary handle- 02 Nos Out going (d) LT Danger notice plate -01 No (e) Panel Control wiring complete with suitable size copper conductor cable and suitable size gland for LT cables |
| 174 | S&F in repair jointing kit for 11 KV ( earthed) grade cable indoor type for end termination, heat shrinkable of size 95 to 185 sq mmconforming to IS - 7098 part-II including thimblling, nut/bolts & washers, HV insulating tape etc, complete all as specified and directed. |
| 175 | S&F in repair straight through joint11 KV heat shrinkable of size upto 95 sq mmconforming to IS - 7098 part-II including thimbling, nut/bolts & washers, HV insulating tape etc, complete all as specified and directed. |
| 176 | S&F in repair straight through joint11 KV heat shrinkable of size 120 to 185 sq mmconforming to IS - 7098 part-II including thimbling, nut/bolts & washers, HV insulating tape etc, complete all as specified and directed. |
| 177 | S&F in repair jointing kit for 11 KV ( earthed) grade cable indoor typefor end termination, heat shrinkable of size 50 to 95 sq mmconforming to IS - 7098 part-II including thimblling, nut/bolts & washers, HV insulating tape etc, complete all as specified and directed. |
| 178 | S&F in repairIP-43, protection metal double door Vertical TPN -DB rated busbar, 415 volts, 50 HZ completewith interconnection links, blanking plates, cable ties, identification labelsTPN4 way,12 modules suitable for accommodating 100 AmpsMCCB 4 pole as incomer and SP/TP MCB as out going and concealed /surface on wall as per site requirement including all cutting holes in or throughwalls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified and directed. Note:- MCCB 100 Amps 4 pole 16 KA as incomer will be measured seprately in relevant item. |
| 179 | S&F in repair IP-43, protection metal double door Vertical TPN -DB rated busbar, 415 volts, 50 HZ completewith interconnection links, blanking plates, cable ties, identification labelsTPN8 way,24 modules suitable for accommodating 100 AmpsMCCB 4 pole as incomer and SP/TP MCB as out going and concealed /surface on wall as per site requirementincluding all cutting holes in or throughwalls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified and directed. Note:- MCCB 100 Amps 4 pole 16 KA as incomer will be measured seprately in relevant item. |
| 180 | S&F in repair, IP-43,MCB DB 8 way,double door, with 100 amp rated busbar 240 V, SPN concealed / surface on wall as directed by Engr in charge including all cutting holes in or throughwalls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified and directed. |
| 181 | M&L in replacement Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of sizewith 10 Sqmm, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS- confirmingto IS: 694-1990 with and including continuous earth wire of size 1x10 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour Caping Casing and its accessariesISI marked of suitable size concealed in wall / on surface as per site requirement etcand connected to common earth dolly including all cutting / chases etc in any type of wall , making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified and directed. Note:-One meter of conduit along with 4x10 sq mm wire and 1x10 sq mm earth shall be measured as one unit length. |
| 182 | M&L in replacement for submain wiring including PVC casing capping 2 run 4 Sqmm cable PVC insulated copper conductor multi - stranded as per FRLS cable drawn throughand including PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour / Caping Casing and its accessariesISI marked of suitable size concealed in wall / on surface as per site requirement etc with all accessories including 4 Sqmm single strand copper conductor cable PVC insulated unsheathed for earth continuity connected to common earth dolly and complete all as specified and directed. |
| 183 | Material and Labour for earthing complete with Copper Earth Plate Electrode 60cmx60cmx3.15mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not lesss than 1.5 meter below the ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same.Copper plate connected with copper strip of 20x3 mmby means of Copper nuts, bolts and washers.Strip laid in 40mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) with following:- (a)Copper strip of size 20 mm x 3 mm upto 7.5 Meter. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit.(GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothlyfinished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 25mm thick with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover. (d) Angle iron frame made of 40x40x4 mm angle iron for 30x30 cm PCC pit for holding the pit cover. (e ) Apply two coat of syntheticnenamel paint over one coat of red oxide zinc chrome primer on exposed steel surfaces and two coat of hot tar on embedded portion of steel surfaces. |
| 184 | Providing and fixing 20mm x 3 mmcopper strip in and including40 mm dia, light grade, GI pipe from earth electrode including connection with brass nut bolt spring washer,excavation and re-filling etc as required strip on surface or in recess for connections etc as required complete all as specified and directed. Note :- Excavation and Earth work shall be measured and paid separately. |
| 185 | S&F in repair,Triple pole and earth enclosure with a three pin and earth plug with socket complete with one triple pole 32 AmpsMCB TP concealed / surface on wall as per site requirement including all cutting holes in or throughwalls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified and directed. |
| 186 | M&L in repair Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required for 32x6 galvanized iron strip, complete all as specified and directed. |
| 187 | Material and Labour for earthing complete with Galvanished Iron Earth Plate Electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not less than 1.5 meter below the ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same.GI plate connected with galvanised iron strip of 32x6 mmby means of Copper nuts, bolts and washers.Strip laid in 40mm dia, light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) including taking out old Earthing with following complete all as specified and directed and as shown in electrical plate No 3 of SSR Part-I & testing on completion :- (a)GI strip of size 32mm x 6mm upto 7.5 Meter. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit.(GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c)Excavation & earthwork in any type of soil,PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B-1, exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover, 50mm thick,1:2:4 type B, reinforced with 8mm dia mild steel bar, 75mm centre to centre with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover. |
| 188 | Supply, laying,testing and commissionnig ofLT cables 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty conforming to IS - 1554 part-I, including cable glands, crimpimg type cable lugs in LT panel/ MCCBin bldg etc to suit the cablelaid in trenches/fixed to poles/drawn through pipes complete ofsizes 400 Sqmm 3.5 core complete all as specified and directed. Note :- Excavation and Earth work shall be measured and paid separately. |
| 189 | Supply, laying,testing and commissionnig ofLT cables 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty conforming to IS - 1554 part-I, including cable glands, crimpimg type cable lugs in LT panel/ MCCBin bldg etc to suit the cablelaid in trenches/fixed to poles/drawn through pipes complete ofsizes 240 Sqmm 3.5 core complete all as specified and directed. Note:- Excavation and Earth work shall be measured and paid separately. |
| 190 | Supply, laying,testing and commissionnig ofLT cables 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty conforming to IS - 1554 part-I, including cable glands, crimpimg type cable lugs in LT panel/ MCCBin bldg etc to suit the cablelaid in trenches/fixed to poles/drawn through pipes complete ofsizes 120 Sqmm 3.5 core complete all as specified and directed. Note:- Excavation and Earth work shall be measured and paid separately. |
| 191 | Supply, laying,testing and commissionnig ofLT cables 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty conforming to IS - 1554 part-I, including cable glands, crimpimg type cable lugs in LT panel/ MCCBin bldg etc to suit the cablelaid in trenches/fixed to poles/drawn through pipes complete ofsizes 70 Sqmm 3.5 core complete all as specified and directed. Note:- Excavation and Earth work shall be measured and paid separately. |
| 192 | Supply, laying,testing and commissionnig ofLT cables 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty conforming to IS - 1554 part-I, including cable glands, crimpimg type cable lugs in LT panel/ MCCBin bldg etc to suit the cablelaid in trenches/fixed to poles/drawn through pipes complete ofsizes 35 Sqmm 3.5 core complete all as specified and directed. Note:- Excavation and Earth work shall be measured and paid separately. |
| 193 | Supply, laying,testing and commissionnig ofLT cables 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty conforming to IS - 1554 part-I, including cable glands, crimpimg type cable lugs in LT panel/ MCCBin bldg etc to suit the cablelaid in trenches/fixed to poles/drawn through pipes complete ofsizes 16 Sqmm 4 core complete all as specified and directed. Note:- Excavation and Earth work shall be measured and paid separately. |
| 194 | Supply and laying 80mm bore light grade GI pipe fixed to walls / poles or laid in trenches, road crossing etc, for protection of under ground cable including sealing ends with hessian cloth impregnated with bituminous compound in ground and with suitable clamps, bolt/nuts etcfor fixing on walls, poles etc complete all as specified and directed. |
| 195 | Supply and laying 50mm bore light grade GI pipe fixed to walls / poles or laid in trenches, road crossing etc, for protection of under ground cable including sealing ends with hessian cloth impregnated with bituminous compound in ground and with suitable clamps, bolt/nuts etcfor fixing on walls, poles etc.complete all as specified and directed. |
| 196 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cables etc. and getting out in the following type of strata complete all as specified and directed:- |
| 197 | Soft/Loose soil |
| 198 | Hard/ Dense soil |
| 199 | Soft/disintegrated Rock |
| 200 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed. |
| 201 | Removal of excavated material [soil] to a distance not Exc 50m and depositing where directed at a level not exc 1.5m above the starting point where directed complete all as specified and directed. |
| 202 | M&L in replacement reinforcedcement concrete pipes, class NP2 of dia 100 mm, laid and jointed complete with collers complete all as specified and directed. |
| 203 | S&F in replacement MCB, SP 20- 32 Amps,10 KA ,230 V, "C"series complete all as specified and directed. |
| 204 | S&F in replacement MCB, SPN, 40 Amps,10 KA ,230 V, "C"series complete all as specified and directed. |
| 205 | S&F in replacementMCB TPN, 415 Volts, 40 Amps,10 KA ,230 V, "C" series complete all as specified and directed. |
| 206 | S&F in replacement MCB TPN, 415 Volts, 63 Amps,10 KA ,230 V, "C" series complete all as specified and directed. |
| 207 | S&F in replacement MCB TP 63 Amps, 415 volts complete all as specified and directed. |
| 208 | S&F in replacement MCB TP 40 Amps, 415 volts complete all as specified and directed. |
| 209 | S&F in replacement of MCCB 63 Amps to 100 Amps, 16 KA, 3 Pole, 415V complete all as specified and directed. |
| 210 | S&F in replacement of MCCB 125 Amps, 16 KA, 3 Pole, 415V complete all as specified and directed. |
| 211 | S&F in replacement of MCCB 200 Amps, 25 KA, 3 Pole, 415V complete all as specified and directed. |
| 212 | S&F in replacement of MCCB 250 Amps, 25 KA, 4 Pole, 415V complete all as specified and directed. |
| 213 | S&F in replacement of MCCB 400 Amps, 36 KA, 3 Pole, 415V complete all as specified and directed. |
| 214 | S&F in replacement of MCCB 630 Amps, 50 KA, 4 Pole, 415V complete all as specified and directed. |
| 215 | Dehydration and Filteration of 11 KV grade Transformer oil through stream line filteration plant for extracting moisture content in the oil and carbon deposits and achiving the dielectric strength to 40 KV for 1 minute with a sphare gap of 2.5 mm and also checking the acidity of oil with acidity test kit and submitting the necessary test kit report /certificate, refilling the filtered oil into anyKVA transformer etc complete all as specified and directed. Note:- The filtration includes taking necessary connection to filtration plant from the transformer to their hose pipe by opening the inlet and outlet oftransformers and closing the same after filtration. |
| 216 | Taking out HT OCB ,11 KV grade 400 Amps rating from HT panel for servicing / repairs by dismantling the HT OCB operating mechamism, inspection of control wiring, realignment of moving contacts with fixed contacts assy, vaccum interrupter ,checking ofrelays for protection, greasing of all moving parts of mechanis, checking and realignment of mechanism for its proper functioning and operation, re-assembling of HT VCB , fixed in its original position , testing for functions, and commissioning complete all as specified and directed. |
| 217 | S&F in replacement of push button suitable for 400 amps OCB complete all as specified and directed. |
| 218 | Calibration of 11 KV grade HT OCB relaysof various types / Makeby OEM through primary & Secondary injection method by bringing relay test kit, software PC system and other required measuring equipments to the site, after testing refixing to OCB 11 KV panel complete all as specified and directed. Note:- Certificate of this test will be provided by the contractor free of cost. |
| 219 | Testing of HT current transformer (set of three) through primary current injection method and also checking the connected panel wiring by brining required test kit and other required testing equipmentand also checking tripping and closing operation complete all as specified and directed. |
| 220 | Supply, install, test, commissioning of 11 KV grade HT OCB current transformer in repair CT of 11 KV grade with CT ratio 300/150/5-5fixed with HT OCB 11 KV including necessary cable connection etcsuitable for fixing in HT panel board of any makeincluding modificationrequired at site to be carried to fix CT upto recess/coilsincluding removing the burnt CTs complete all as specified and directed. |
| 221 | M&L for checking of Potential Transformer by conducting ratio test/meggering for IR values, provided in OCBs11 KV feeders checking of control wiring meters, relay and tripping system complete all as specified and directed. |
| 222 | S&F in repairPotential Transformerfor HT OCB 11/110 volts/3, 100 VA resincast appoxy moulded with metal enclosure as per site requirement and connecting bus bar including providing bus bar, testing for functionality complete all as specified and directed. |
| 223 | S&F in replacement HT Voltmeter, range 0 to 15 KV auxillary supply 110 Volts suitable forfixing with existing HT OCB 11 KVpanel complete all as specified and directed. |
| 224 | S&Fin replacement ammeter suitable for fixing with existing HTOCB 11 KV panel ratio like 300/5,200/5,100/5 complete all as specified and directed. |
| 225 | Supply only hand gloves HT for operating / handling sub station upto 22 KV ISI Marked complete all as specified and directed. |
| 226 | S&F in repair breather assembly suitable for existing transformer upto 500 KVA capacitycomplete all as specified and directed. |
| 227 | Repair to transformer to arrest oil leakage by removing transformer oil , dismantling the top cover alongwith conservator tank/ OLTC, replacing the top gasket washer etc replacement of HT/LT bushes complete dismantling the cooling fins and welding where leakage to arrest oil leakage and reassembling the transformer, refilling filtered oil testing complete for transformer capacity upto 500 KVA complete all as specified and directed. Note:- Filteration of oil and all other spares/ Material will be measured and paid separately . |
| 228 | Dismantalling the exsisting Transformerupto 1000 KVA transformer by disconnecting incoming and outgoingHT/LT cables/bus duct connection, shifting to workshop by arranging suitable vehicleand crane and removingtank top cover /lid of 11 KV grade at workshop , draining out the transformer oil and keeping in safe custody in clean and dry containers for reuse. and carrying out themaintenance work by experiencedand qualified Engineer , dismantling the OLTC/ conservator tank , dismantlingHT/LT bushings from core winding and lifting the core assy carefullywithout damaging by using the tripod/ chainpully/crane etc, cleaning / removing the sludge from the transformer tank, cleaning the OLTC/ conservator tank and checking the serviceability of the coil / core winding , checking the condition of the body , cleaning the coil/ core assy , refixing of core , core assy , OLTC/ conservator tank, HT/LT winding connection, connection of protective devices like buckholz relay connection,winding temperature indication ,oil temperature indication includingfixing new gaskets to transformer top and all other places gaskets/washer , terminal studs of HT/LT sides and reassembling of transformer after repairs, refitting the transformer coil incl improvement of insulation resistance value within desired level by heating or any other method to required level and re assembling at the site, connection of LT/HT sides, testing and charging the transformer complete all as specified and directed. Note:- Filteration of oil and all other spares/ Material will be measured and paid separately . |
| 229 | Supply only silica gel in the transformer breather assy complete all as specified and directed. |
| 230 | Supply only HV Bushingsuitable for upto 1000 KVA transformer including connection complete all as specified and directed. |
| 231 | Supply only LV Bushingsuitable for upto 1000 KVA transformer including connection complete all as specified and directed. |
| 232 | Supply only copper terminal stud , both end threaded complete with double nuts and washers with heat resistant gasket suitable for upto 1000 KVA transformer LV side 415 volts including connection complete all as specified and directed. |
| 233 | Supply and filling transformer oil duly filtered and tested confirming to IS 335 1963 as amended including all testing complete all as specified and directed. |
| 234 | Supply only (HV side) copper winded coil of existing type size and guage 11000 volts complete with insulating material for trnsformers of upto 1000 KVA complete all as specified and directed. |
| 235 | All as per item Ser No 156.00 above but LT side, 415 volts grade. |
| 236 | S&F of limit switch suitable for 400 amps VCB/OCB complete all as specified and directed. |
| 237 | S&F of AC/DC controling unit suitable for 400 amps VCB/OCB complete all as specified and directed. |
| 238 | S&F of Triping and closing coil 24 v DC suitable for 400 amps VCB/OCB complete all as specified and directed. |
| 239 | S&F of bushing suitable for 400 amps OCB complete all as specified and directed. |
| 240 | S&F of bushing rod suitable for 400 amps OCB complete all as specified and directed. |
| 241 | S&F of CT with ratio 100/50/5+1 suitable for 400 amps OCB complete all as specified and directed. |
| 242 | S&F of 11 kv OCB spout contact suitable for 400 amps OCB complete all as specified and directed. |
| 243 | S&F of panel wiring complete suitable for 400 amps OCB complete all as specified and directed. |
| 244 | S&F of earth fault over current relay IDMT relay suitable for 400 amps OCB complete all as specified and directed. |
| 245 | M&L for Painting of HT OCB in existing colour with two coats of synthetic enamel paintincluding preperation of surfaces complete all as specified and directed. |
| 246 | Taking proper shutdown & Isolate the HT electric supply andconnecting LT cable 400 to 630 sqmm LT cable in existing LT panel with lugs, glands complete all as specified and directed. |
| 247 | S&F in replacement of HRC/MCB fuse link clip type on fuse link 2 to 20 amps operating voltage 415 Volt complete all as specified and directed. |
| 248 | S&F in replacement of fuse base suitable for cylindrical/DIN type HRC fuse of capacity 2-32 amps complete all as specified and directed. |
| 249 | S&F in replacement of closing spring assembly complete all as specified and directed. |
| 250 | S&F in replacement of tripping spring assembly complete all as specified and directed. |
| 251 | S&F in replacement of charging motor cut off limit switch complete all as specified and directed. |
| 252 | S&F in replacement of spring charging handle motorized mechanism of VCB complete all as specified and directed. |
| 253 | S&F in replacement of push button bracket assembly complete all as specified and directed. |
| 254 | S&F in replacement of bus bar support insulator 75 mm dia including all fixing accessories complete suitable or VCB/HT bus bar chamber complete all as specified and directed. |
| 255 | S&F in replacement of bus bar barrier as per existing (set of three) with nuts bolts complete all as specified and directed. |
| 256 | S&F in replacement of toggle switch for space heater complete with all accessories complete all as specified and directed. |
| 257 | S&F in replacement of charged/ discharged indication assembly complete all as specified and directed. |
| 258 | S&F in replacement of 11 pin anti pumping relay 110 volt DC complete all as specified and directed. |
| 259 | S&F in replacement of bottom terminal with jaw contact complete all as specified and directed. |
| 260 | S&F in replacement of top terminal with jaw contact complete all as specified and directed. |
| 261 | S&F in replacement of PT epoxy female bushing suitale for R Y B phase complete all as specified and directed. |
| 262 | S&F in replacement of PT epoxy male bushing suitale for R Y B phase complete all as specified and directed. |
| 263 | S&F in replacement of PT fuse 11 KV complete all as specified and directed. |
| 264 | S&F in repair HT bushing 11 kv suitable for upto 1000 KVA transformer including brass rod complete with gasket as per matching to existing complete all as specified and directed. |
| 265 | S&F in repair LT bushing 11 kv suitable for upto 1000 KVA transformer including brass rod complete with gasket as per matching to existing complete all as specified and directed. |
| 266 | S&F in repair head gasket sheet 6 mm thick suitable for transformerupto 1000 KVAcapacity including replacement of nuts bolts washers including necessary T&P required at site complete all as specified and directed. |
| 267 | S&F in repair temparature gauge analog type complete with all accessories as per matching to existing complete all as specified and directed. |
| 268 | S&F in repair three phase over current earth fault relay MC-61 as per matching to existing one including all accessories and wiring complete all as specified and directed. |
| 269 | S&F in repair three phase over current earth fault relay MC-61A as per matching to existing one including all accessories and wiring complete all as specified and directed. |
| 270 | S&F in repair Led type indicationlamp of voltage AC/DC set of RYB as per matching to existing complete all as specified and directed. |
| 271 | S&F in repair battery charger of capacity 12 volts for AMF panel complete all as specified and directed. |
| 272 | S&F in repair battery charger of capacity 24 volts for AMF panel complete all as specified and directed. |
| 273 | S&F in repair HTthree phase digital multifunctional meter suitable for measure all electricl qualities like voltmeter, current, power, Frequency & power factor complete all as specified and directed. |
| 274 | S&F in repair LT three phase digital multifunctional meter suitable for measure all electricl qualities like voltmeter, current, power, Frequency & power factor complete all as specified and directed. |
| 275 | S&F in repair VCB/OCB power pack unit 24 volt DC 7 AH with battery bank for backup for panel as per existing matching complete all as specified and directed. |
| 276 | M&L for painting of LT panel indoor/outdoor type area of front face of panel exc 1.5 sq mm but n. exc 2.5 sq m each with spray gun with two coats of synthetic enamel heat resistant grey paint including preparation of old painted surface/ removing old faded/rust/cemeted material of surface of complete LT panel, complete all as specified and directed. |
| 277 | S&F in repair angle iron work and fixing/fabrication of angle iron frame 40x40x5 mm thick for LT panel complete including welding work at site complete all as specified and directed. |
| 278 | S&F in repair LT panel of any size/make incl cutting, welding of front panel back cover and top cover made of CRCA steel sheet of size not less than 3.15 mm thick as per site requirement including colour matching with existing, including hinges and locking device complete all as specified and directed. |
| 279 | S&F in repair of alluminium bus bar PVC insulated in red, yellow, blue & black colours of rating 400 amps complete all as specified and directed. |
| 280 | S&F in repair of alluminium bus bar PVC insulated in red,yellow, blue & black colours of rating 800 amps complete all as specified and directed. |
| 281 | S&F in repair of alluminium bus bar PVC insulated in red,yellow, blue & black colours of rating 1500 amps complete all as specified and directed. |
| 282 | S&F in repair of APFC relay for upto 225 KVAR 10 stages including wiring CTs and all connected item complete all as specified and directed. |
| 283 | S&F in repair of LED type indicating lamp type of voltage AC/DC set of RYB as per matching to existing complete all as specified and directed. |
| 284 | S&F in repair of capacitor bank MP-05 KVAR capacity rated 440 volts AC, 3 phase, 50 Hz delta connection round type complete all as specified and directed. |
| 285 | S&F in repair of capacitor bank MP-10 KVAR capacity rated 440 volts AC, 3 phase, 50 Hz delta connection round type complete all as specified and directed. |
| 286 | S&F in repair of capacitor, contractor MO C5 to C25complete all as specified and directed. |
| 287 | Supply and fixing in replacement ON load change over switch 440 volts, 4 pole of rating 400 amps with encloser fixed on wall/ panel including nut/bolts/washers complete all as specified and directed. |
| 288 | M&L in replacementfor heat shrinkable Straight through jointing kit for LT 1.1 KV XLPE cables more than 185 Sqmm to 400 Sqmm,3.5 core including all accessories requiredcomplete all as specified and directed. |
| 289 | M&L in replacementfor heat shrinkable Straight through jointing kit for LT 1.1 KV XLPE cables 120 to 185 Sqmm, 3.5 core including all accessories requiredcomplete all as specified and directed. |
| 290 | M&L in replacement for heat shrinkable Straight through jointing kit for LT 1.1 KV XLPE cables 70 to less than 120 Sqmm, 3.5 core including all accessories required complete all as specified and directed. |
| 291 | M&L in replacement for heat shrinkable Straight through jointing kit for LT 1.1 KV XLPE cables 16 to 50 Sqmm, 3.5 core including all accessories required complete all as specified and directed. |
| 292 | Supply and laying in repair in trenches burnt brick sub class "B" standard size for cable protection keeping width of the brick parallel to the length of the cable complete all as specified and directed. |
| 293 | Supply and laying in repair un-reinforced factory made precast concrete cable cover, class HV, type 1, flat size-300x180x40 mm complete all as specified and directed. |
| 294 | Supply and spreading clean dry river sand in trenches ,ducts including leveling, punning for cushioning of cables complete all as specified and directed. Note:- Punned thickness of sand cushioning shall be measured and paid. |
| 295 | S&F in repair MCCB 400Amps 4 Pole breaking capacity 36KA including taking down old burnt MCCB complete all as specified and directed. |
| 296 | S&F in repair MCCB 250Amps 4 Pole breaking capacity 36KA including taking down old burnt MCCB complete all as specified and directed. |
| 297 | S&F in repair MCCB 160 Amps 4 Pole breaking capacity 25KA including taking down old burnt MCCB complete all as specified and directed. |
| 298 | Supply and laying in replecementXLPE insulatedscreened, PVC bedded galvanised steel strip or wire armoured electric power cable(Heavy duty) with aluminium conductor, 11000 volts, grade cross sectional area 150 Sqmm 3 core complete all as specified and directed. |
| 299 | Supply and laying in replecementXLPE insulatedscreened, PVC bedded galvanised steel strip or wire armoured electric power cable(Heavy duty) with aluminium conductor, 11000 volts, grade cross sectional area 120 Sqmm 3 core complete all as specified and directed. |
| 300 | Supply and laying in replecementXLPE insulatedscreened, PVC bedded galvanised steel strip or wire armoured electric power cable(Heavy duty) with aluminium conductor, 11000 volts, grade cross sectional area 95 Sqmm 3 core complete all as specified and directed. |
| 301 | M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregates)for repairing of LT pole/ panel foundation etc including filling in road cuts/hard standing etc complete all as specified and directed. |
| 302 | M&L for PCC 1:4:8 type D-1 (using 40 mm graded stone aggregates)for repairing of LT pole/ panel foundation etc including filling in road cuts/hard standing etc complete all as specified and directed. |
| 303 | Supply, laying, testing and commissionnig ofLT cables 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty conforming to IS - 1554 part-I, including cable glands, crimpimg type cable lugs in LT panel/ MCCBin bldg etc to suit the cablelaid in trenches/fixed to poles/drawn through pipes complete ofsizes 300 Sqmm, 3.5 core complete all as specified and directed. |
| 304 | All as per item Ser No 225.00 above but 185 Sqmm, 3.5 core. |
| 305 | All as per item Ser No 225.00 above but 25 Sqmm, 3.5 core. |
| 306 | Supplying and laying in replacement synthetic rubber insulated mats 3 mm thick for voltage upto 33 KV (size 2 m x 1 mtr) for electrical purpose as per IS 15652-2006 suitable for electrical shock safety complete all as specified and directed. |
| 307 | Design, supply,install, test and comissioning of free standing floor mounted, dust and vermin proof Panel of suitable sizefor out door installation factory made both front and rear side double door system, fabricated with 3.15 mm thick CRCA sheet for load bearing members and 2 mm thick for doors and covers and shall be painted witrh epoxy powder paint by means of electro static gun after rigorous pre treatment comprising of cold phosphating process on all internal and external surfaces after due preparation of surfaces. The panel shall consist of 600 ,Amps rating TPN bus bars of high conductivity aluminium alloy and shall be provided with colour coded heat shrinkaable sleeves,with 600 mm depth of the panel. The panel shall be modular/cubical trypewith bus chamber cable ally and provided with separate fully compartments for each switch including instrumentation such as Ampere Meter, Volt meter, Phase indicating lampwith double stud hinged door , front and rear openablewith locking arrangement and suitable for 1100 Volts grade , 3 phase 415 Volts , 50 cycles , AC Supply and to with stand short circuit fault level of not less than 10 KA and degree of protection shall be IP 54 . The panel shall be fixed with angle iron frame made out of angles of size 50x50x6 mm , embedded 200 mm below ground levelin PCC 1:2:4, TypeB1 using 20 mm grade stone aggregate , 600 mm above ground level and comprising the following including taking out of old panels etc , removing of cables and connecting to new panels with all required material such as glands, lugs etc including comprising of following complete all as specified and directed:- |
| 308 | INCOMING :- (a) MCCB 4 pole, 400 Amps, rup cap 36 KA at 415 volt 50 Hz ACfixed thermal magnetic release type and earth leakage protection ICS =100% ICUwith rotary handle- 01 No incoming OUTGOING :- (a) MCCB 4 pole, 250 Amps, rup cap 25 KA at 415 volt 50 Hz AC,fixed thermal magnetic release typewith rotary handle- 01 Nos Out going (b) MCCB 4pole,125 Amps, rup cap 16 KA at 415 volt 50 Hz ACfixed thermal magnetic release type with rotary handle- 02 Nos Out going (c) MCCB 3 pole, 63 Amps, rup cap 16 KA at 415 volt 50 Hz ACfixed thermal magnetic release type with rotary handle- 03 Nos Out going (d) LT Danger notice plate -01 No (e) Panel Control wiring complete with suitable size copper conductor cable and suitable size gland for LT cables |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
