Military Engineer Services-MES has published Tender For Repair/Replacement Of Lt Switchgear And Allied Works And Repair To Boundary Wall,Steel Gate,Pillars,Paving And Fencing Etc At Certain Unit At Misa Camp Under Ge (S) Tezpur. Submission Date for this Tender is 04-11-2023. Switch Gear Tenders in tezpur Assam. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 28-Oct-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 04-11-2023 |
| Sl. No. | Item Description |
| 1 | Demolition of Reinforced cement concreteof any description and in any position not otherwise specifically provided for.complete all as specified and directed. |
| 2 | Dismantling wrought iron or mild steel work of any description.complete all as specified and directed. |
| 3 | Demolition of Cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided. complete all as directed. |
| 4 | Dismantling of AC sheet corrugated / Semi corrugated sheets in wall cladding or in roof covering.complete all as specified and directed. |
| 5 | S&F 2 mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc.complete all as specified and directed. |
| 6 | M & L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with L type J type or cranked hook bolts.complete all as specified and directed. |
| 7 | S&Fsteel workin tubulartrusses/postsincludingspecialshaped washer etc completeusing ERWor inductionbutweldedtubes conformingto IS- 1161-1979 grade St-240 complete all as specified and directed |
| 8 | M&L for cement concrete type D2 1:3:6 (40mm graded stone aggregate) in foundation filling and mass concrete.omplete all as specified and directed. |
| 9 | M & LPCC (1:2:4) type B-1 (with using 20 mm graded stone aggregate) as copingof pole/panel including necessary form work as required.omplete all as specified and directed. |
| 10 | M&L cement concrete(1:2:4) type-B-2(Using 40 mm graded stone agg) as in surface channel complete all as specified and directed. |
| 11 | M/L 100mm thick P.C.C 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base/path etc complete all as specified and directed. . |
| 12 | M/L 75mm thick P.C.C 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection/sub base/base/path etc complete all as specified and directed. |
| 13 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.omplete all as specified and directed. |
| 14 | M & L for 20mm thick Granite (of any type) work (table rubbed and polished)in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed |
| 15 | M&L glossy finish chequred cement concrete tiles 30cm X 30cm X 25mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors including 15 mm thick in cement mortar 1:6. complete all as specified and directed. |
| 16 | S & F in repair Machine pressed precast concrete interlocking paver block gloosy fineshed of any shape and design complete all as specified and directed. size confirming to IS 15658-2006 of80 mm thickness, M-40 Grade.complete all as specified and directed |
| 17 | M&for factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3, including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed |
| 18 | Extra forming fair finished drain or channels 30cm girth in cement concrete using extra cement including forms moulds, mitred/stopped end etc. |
| 19 | Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto in above item |
| 20 | Excavatingin trenches n exc 1.5mwide and n.exc 1.5m depth for sewage line and manholes, drain ,footing/fdn etc and getting out in soft/loose soil complete all as specified and directed. |
| 21 | Excavation in trenches not exceeding 1.5m wide and exc. 1.5m depth not exc 3.0m depth and getting out in soft/loose soil complete all as specified and as directed. |
| 22 | Returning, filling in,including spreading, levelling watering and well ramming in layer not exc 25 cm in soft/loose soil complete all as specified and directed. |
| 23 | Removing excavated surplus soil at a distance n.exc 50mand depositing complete all as specified and directed. |
| 24 | M & L Pre-cast RCC M-15 Design Mix type B1 using 20 mm graded stone aggregate as in cover slab set in CM 1:4 complete all as specified and directed. |
| 25 | M&L for RCC M-25 Design Mix using 20 mm graded aggregate in beam , linte band cantilevers and the likeetc complete all as specified and directed. |
| 26 | M&L for Use and waste formwork to soffits of suspended slab such as roof slab, floor slab flat, fair finishes etc complete all as specified and directed ides of RCC/PCC bands in walls horizontal or sloping and similar work. |
| 27 | M & L TMTbars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clip to Fe-410 incl fabrication complete all as specified and directed. |
| 28 | Taking down cement plaster on brick/concrete surfaces of drains, walls and ceiling including racking out jointing hacking for key, scrubbing down with water etc.complete all as specified and directed. |
| 29 | M&L for Rendering 15mm thick on fair faces of brick work or concrete surfacesin cement mortar 1:4using WPC and finished even and smooth without using extra cement complete all as specified and directed.Note : WPC shall be measured and paid seperatly under relevent Item. |
| 30 | M&L for Rendering 15mm thick onother than fair faces of brick work or concrete surfacesin cement mortar 1:4 using WPC and finished even and smooth without using extra cement complete all as specified and directed.Note : WPC shall be measured and paid seperatly under relevent Item. |
| 31 | Supply only integral water proofing compound@ 1% as per Manufacturer instruction |
| 32 | Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and as directed. |
| 33 | M&Lbrick work with sub class" B" bricks of old size,straight or curved on plan exc 6 m mean radius built in cement mortar 1:6.complete all as specified and as directed. |
| 34 | M&Lbrick work with sub class" B" bricks of old size,straight or curved on plan exc 6 m mean radius built in cement mortar 1:4.complete all as specified and as directed. |
| 35 | M&L brick work with sub class"B" bricks,straight or curved on plan to any radius in half brick thick wall built in CM 1:4.complete all as specified and as directed. |
| 36 | M&L for providing precast cement concrete louvers andJali 40 mm thick RCC1:2:4 using 12.5 mm grade stone aggregate set in cement mortar 1:4 etc compelte all as specified . |
| 37 | M&L two coats of cement base paint and a coat of wall primer including preparation of new surfaces.complete all as specified and as directed. |
| 38 | M&L two coats of cement base paint including preparation of old surfaces.complete all as specified and as directed. |
| 39 | M & L for two coats of exterior emulsion antifungus paint over a coat of primer and a coat of 1mm thick wall care putty by smart painting method to wall including preparation of new surface as specified and directed |
| 40 | M & L for two coats of exterior emulsion antifungus paint over a coat of primer over a coat of 1mm thick wall care puttyby smart painting method to wall including preparation after complete removal of existing treatment as specified and directed |
| 41 | Dismantling fencing wire mesh any type.complete all as specified and as directed. |
| 42 | Dismantling posts and struts (wood, steel or RCC) any sectionebedded in concrete, including taking out embedded portion in concrete and making good disturbed ground complete all as specified and directed. |
| 43 | Excavating soft/loose soil in post holes (or similar holes) each n.exc 0.5 Cu.m getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm watering and removing surplus soil to a distance in exc 50m and making good surface. |
| 44 | S&F posts and struts in fencing including cutting tops to shape as directed , drilling holes , notching for wire , etc , flat iron fillets ( for securing wire mesh etc ) including all necessary drilling , bolting riveting etc and similar work confirmingto Fe-290 Gde E-165 Complete all as specified and directed. |
| 45 | M&flat iron fillets fixed to the fencing posts including all necessary drilling bolting or riveting etc and similar work conforming ot Fe 410-0 or Fe 310-0.complete all as specified and as directed. |
| 46 | S&F 10mm diaMS roundbar fixed to chain link fening Top and bottom.complete all as specified and as directed. |
| 47 | S&F 10 mm dia Mild screw bolts machine made) with hexagonal or square heads at one end and screwed the other, or screwed on both ends each screwed end to be fitted with washers and one hexagonal or square nut but length of bolt n exc 5cm long.complete all as specified and as directed. |
| 48 | S&F in repair galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing in repairsto any type of standared rails straining bolts including securingor tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc. as directed (each line wire to be measured) .complete all as specified and as directed. |
| 49 | S&F chain link MS galvanised fencing pvc coated, 4mm dia wire and size of mesh 100x100mm x 3mm(minimum)including line wires to any type of standered rails, straining bolts, nut & bolt for angle iron post MS tie bars incl provisioning of binding wire et and any size or type.complete all as specified and as directed. |
| 50 | M&L for preparation of new steel surfaces n.exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.complete all as specified and as directed. |
| 51 | M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.complete all as specified and as directed. |
| 52 | S&F Framed work such as door or gates of angle or other section, grills, gratings, etc, with ends of bars shouldered and/or riveted ,or forged into spikes, framed guard bars; barred iron doors, ladders;framed balusters; walk ways,railings, frameworks of water tanks and similar workincluding pintle hinges stops hand made sliding door bolts etc |
| 53 | M & L for Hardcore of crushed stone gravels gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete as directed. |
| 54 | M&L for for sand cushioning over sub base for fixing of interlocking tilesspread levelled to reqd level or on trenches complete all as specified and directed. |
| 55 | M&L Bricks common burnt clay building bricks, sub-class ‘B’ designation 75 laid dry width wise across the line of cable in trenches for protection of UG cable including dismantaling of old unservieacble bricks complete. |
| 56 | M&L 100 mm bore GI tubing light grade for protection of cable including necessary joint including taking down old u/s one complete all as specified and as directed. |
| 57 | Allasper Item No 56 above item here-in-beforebut40 mmdia. |
| 58 | Material and labour for earthing complete with galvanized steel plate electrodes of size 600mm x600mm x 6mm thick buried directly in ground with earth pit not less than 2.25m deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to galvanized iron strip of 32 mm x 6mm earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanized iron pipe 40 mm bore (light grade) including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting (Inside cavity to be made in Pit for placing cover slab) made out of 8 mm dia MS bar funnel wire mesh 20 mm bore galvanized iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR part 1 including testing on completion all as specified and directed incl demolition to existing one complete all as specified and as directed. |
| 59 | Supply, laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade cross sectional area 95 sq. mm 3½ Core including taking down old unserviceable complete all as directed by Engr-in-Charge. |
| 60 | Supply, laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade cross sectional area 50 sq. mm 3½ Core including taking down old unserviceable complete all as directed by Engr-in-Charge. |
| 61 | Supply, laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade cross sectional area 25 sq. mm 4 Core including taking down old unserviceable complete all as directed by Engr-in-Charge. |
| 62 | Supply, laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade cross sectional area 16 sq. mm 4 Core including taking down old unserviceable complete all as directed by Engr-in-Charge. |
| 63 | Supply, laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade cross sectional area 16 sq. mm 2 Core including taking down old unserviceable complete all as directed by Engr-in-Charge. |
| 64 | Supply, laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade cross sectional area 10 sq. mm 4 Core including taking down old unserviceable complete all as directed by Engr-in-Charge. |
| 65 | Supply, laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade cross sectional area 10 sq. mm 2 Core including taking down old unserviceable complete all as directed by Engr-in-Charge. |
| 66 | M & L for heat shrink type straightthroughjointing kit for 1.1 KVXLPE/PVC cablesofsize6 to 16 Sqmm 4 core including testing after jointing complete all as specified & directed. |
| 67 | All as per Item No 66 above but25 to 50 Sqmm 3.5 Core |
| 68 | All as per Item No 66 above but 70 to 90 Sqmm 3.5 Core |
| 69 | Material and labour for Painting by mechincal spay of LT feeder pillar Box of any size after cleaning the body surface by rubbing with emery Paper to remove rust, dust etc and applying two coat of polyurethane paint internally and externally,including indication of feeder Volt etc all as directed by Engr-in-Charge. |
| 70 | M&L for Boring/Drilling (Horizontally) manually/mechanically under existing road (Maximum 10 M in width) suitable for passing GI tubingof 40 to 150 mm bore complete all as specified and directed. |
| 71 | Dismantling existingsteel or cement poles/ struts, any size carefully including necessary excavation demolition of concrete etc. and removing the old unserviceable rubbish etc.complete all as specified and directed. |
| 72 | M & L for Steeltubular swagedpolescompletewithcastiron/MSbaseplate , finialtaperplug , bolts , nuts & screwsasspecifiedtype 410 SP-31 , 9.0 meter long including making hole of 2 inch dia at 2.5 meter from bottom and 1 inch at 8 meter from bottomcomplete all as specified & directed. (Note: PCC anti climbing device, cross arms insulator and earth work measure and paid separately).complete all as specified and directed. |
| 73 | Supply and fixing in repair MCCB 4 pole , 415 V Fixed type 250 Amp, with breaking capacity 35 KA including spreader link and seperator and any modification required for fixing of MCCB including taking down old unserviceable one complete all as directed. |
| 74 | Supply and fixing in repair MCCB 4 pole , 415 V Fixed type 200 Amp, with breaking capacity 25 KA including spreader link and seperator and any modification required for fixing of MCCB including taking down old unserviceable one complete all as directed. |
| 75 | Supply and fixing in repair MCCB 4 pole , 415 V Fixed type 160 Amp, with breaking capacity 25 KA including spreader link and seperator and any modification required for fixing of MCCB including taking down old unserviceable one complete all as directed. |
| 76 | Supply and fixing in repair MCCB 4 pole , 415 V Fixed type 100 Amp, with breaking capacity 16 KA including spreader link and seperator and any modification required for fixing of MCCB including taking down old unserviceable one complete all as directed. |
| 77 | Supply and fixing in repair MCCB 4 pole , 415 V Fixed type 63 Amp, with breaking capacity 16 KA including spreader link and seperator and any modification required for fixing of MCCB including taking down old unserviceable one complete all as directed. |
| 78 | Supply and fixing in repair of MCB TPN 415 Volts, 63 Amps, 50 Hz, breaking capacity 10KA, C series all as specified and directed |
| 79 | Supply and fixing in repair of loop in loop out junction box with SP 6-32 amp,IP 65 / IP 66 protection halogen free andweather proof of minimum size (130 x 180 x 77) mm, fixed to Pole with suitable clamp including nuts and bolts and washers incl provision of connector fixed to pole all as directed. |
| 80 | Supply & fixing in repair copper cable PVC insulated stranded twin core flat or circular aluminum conductor of size 1.50 Sqmm, served with inner sheathing of PVC tape and complete all as specified and directed. |
| 81 | Supply & fixing in repair security light fittings 60 watts, minimumm lumen output 110 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection and integrated driver with 10KVsurge protection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as directed. Note 1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount. Note 2-Contractor"s supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor"s firm name while carriying out any activities in defence area for better check of security purpose.Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
