Tender For Target For The Year2023-24- Iind Phase 50% -Fabrication Of 11Kv ‘V’ Cross Arm, Back Clamps For 11Kv/33Kv ‘V’ Cross Arm, 1.8M Channel Cross Arm, Back Clamps For Ht Cross Arm, 11Kv ‘F’ Clamp, Ht Stay Clamp And Lt Stay Clamp At Production Shop, C., Kottayam-Kerala

Tender For Target For The Year2023-24- Iind Phase 50% -Fabrication Of 11Kv ‘V’ Cross Arm, Back Clamps For 11Kv / 33Kv ‘V’ Cross Arm, 1.8M Channel Cross Arm, Back Clamps For Ht Cross Arm, 11Kv ‘F’ Clamp, Ht Stay Clamp And Lt Stay Clamp At Production Shop, C.M.Division, Pallom-- 1 Fabricating 11Kv / 33Kv V Cross Arm Using 75X40mm / 100X50mm Ms Channel Cutting By Gas, Bending Into Required Shape And Jointed By Arc Welding In Both Sides Of Each Gas Cutting Portion Including 2 Nos Of 50Mm Long Ms Flat 50X6mm Wherever Necessary On Each Ends And Drilling 4Nos. Of 22Mm Dia Holes And 2 Nos Of 18Mm Dia Holes As Per Drawing Including Flux Removal, Stacking The Finished Goods In Such A Manner That Item Can Be Counted In Numbersas Per Direction Of Departmental Officers And As Per Drawings ( Charges Inclusive Of Labour, Cutting Gas, Welding Rod, Punch & Die, Drill Bits Etc. ) Complete. 2 Fabricating Back Clamps For 11Kv / 33Kv V Crossarm 44Cm Long Using 75X8mm M.S.Flat As Per Design And Stacking The Finished Clamps In Such A Manner That The Item Can Be Counted In Numbersas Per Direction Of Departmental Officers. ( Charges Inclusive Of Shearing Tools, Punch & Die Etc. Complete. ) 3 Fabricating 1.8M Channel Crossarm Using Ms Channel75x40 ( Ismc 75 ) And With 21Mm Dia Drilled / Punched Holes As Per Boardss Specification And Drawing, Including Gas Cutting, Levelling And Stacking At Suitable Place As Per The Direction Of The Departmental Officers ( Charges Inclusive Of Cost Of Labour & Consumables, Such As Cutting Gas, Lpg, Punch & Die, Drill Bit Etc. ) Complete. ( 4296Nos ) 4 Fabricating Back Clamps For Ht Crossarms 40Cm Long Using 75X8mm M.S.Flat As Per Design And Stacking The Finished Clamps In Such A Manner That The Item Can Be Counted In Numbersas Per Direction Of Departmental Officers. ( Charges Inclusive Of Shearing Tools, Punch & Die Etc. Complete. ) 5 Fabricating 11Kv F Clamp Using Ms Flat 50X8mm, Cutting, Levelling, Drilling Holes, Bending The Top End For A Length Of 5Cm And Welding 5Cm Long 50X8mm Flat To Form F Shape For Holding Insulator Pin At Top End As Per Boards Design And Drawing Including Stacking The Finished Products At Suitable Places In Such A Manner That The Item Can Be Easily Counted In Numbersas Per Direction Of Departmental Officers. ( Charges Inclusive Of Labour And Cost Of Welding Electrode, Welding Tools, Shearing Tools, Punch & Die Etc. Complete. ) 6 Fabricatinght Stay Clamps For Ht Stay Rodsof351 Mm Long Using50 X8 Mm Ms Flat As Per Design And Drawing Including Cutting, Bending, Punching 2 Nos 18Mm Dia Holes And Stacking The Finished Products As Per The Direction Of The Departmental Officers. ( Charges Inclusive Of Labour, Shearing Tool, Punch & Die Etc. Complete. ) 7 Fabricatinglt Stay Clamps For Lt Stay Rodsof326 Mm Long Using50 X8 Mm Ms Flat As Per Design And Drawing Including Cutting, Bending, Punching 2 Nos 18Mm Dia Holes And Stacking The Finished Products As Per The Direction Of The Departmental Officers. ( Charges Inclusive Of Labour, Shearing Tool, Punch & Die Etc. Complete. )

INR 5900 /-

INR 50000.0 /-

INR 23.38 Lakhs /-