|
| 1 | INTERIOR FINISHING |
| 2 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete |
| 3 | White washing with lime to give an even shade : |
| 4 | New work (three or more coats) |
| 5 | Colour washing such as green, blue or buff to give an even shade : |
| 6 | New work (two or more coats) with a base coat of whitewashing with lime |
| 7 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : |
| 8 | New work (two or more coats) over and including waterthinnable priming coat with cement primer |
| 9 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : |
| 10 | Water thinnable cement primer |
| 11 | EXTERIOR FINISHING |
| 12 | Finishing walls with water proofing cement paint of required shade : |
| 13 | New work (Two or more coats applied @ 3.84 kg/10 sqm) |
| 14 | Finishing walls with textured exterior paint of required shade : |
| 15 | New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm |
| 16 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 17 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 18 | Applying priming coat : |
| 19 | With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 20 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works |
| 21 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : |
| 22 | Two or more coats on new work |
| 23 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 24 | Two or more coats on new work |
| 25 | French spirit polishing : |
| 26 | Two or more coats on new works including a coat of wood filler |
| 27 | Polishing on wood work with ready mixed wax polish of approved brand and manufacture : |
| 28 | New work |
| 29 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 30 | FINISHING |
| 31 | White washing with lime to give an even shade : |
| 32 | Old work (one or more coats) . |
| 33 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 34 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : |
| 35 | Old work (one or more coats) |
| 36 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 37 | Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : |
| 38 | 75 mm diameter pipes |
| 39 | 100 mm diameter pipes |
| 40 | 150 mm diameter pipes |
| 41 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 42 | One coat |
| 43 | Two coats |
| 44 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 45 | One or more coats on old work |
| 46 | Painting with aluminium paint of approved brand and manufacture to give an even shade |
| 47 | One or more coats on old work |
| 48 | Polishing on wood work with ready made wax polish of approved brand and manufacture : |
| 49 | Old work |
| 50 | Finishing walls with water proofing cement paint of required shade : |
| 51 | Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. |
| 52 | Old work (one or more coats @ 2.20 kg/10 sqm) complete. |
| 53 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 54 | Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). |
| 55 | Old work (One or more coat applied @ 0.90 ltr/10 sqm). |
| 56 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade |
| 57 | Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface |
| 58 | Old work (one or more coats applied @ 0.83 ltr/10 sqm). |
| 59 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 60 | Float glass panes of nominal thickness 4 mm (weightnot less than 10kg/sqm) |
| 61 | Float glass panes of nominal thickness 5 mm (weightnot less than 12.5kg/sqm |
| 62 | Renewing glass panes, with wooden fillets wherever necessary: |
| 63 | Float glass panes of nominal thickness 4 mm (weightnot less than 10kg/sqm) |
| 64 | Float glass panes of nominal thickness 5 mm (weightnot less than 12.5kg/sqm) |
| 65 | Providing & Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone Pattern with anti algae and UV resistance properties to be applied as intermediate finish in desired pattern @ 43.04 kgs/10 sqm to form film of 1- 1.5 mm thickness after scrappingand properly cleaning the surface to remove loose particles from the plaster surface, followed by top coating with Premium Acrylic Smooth exterior paint with Silicone additives of required shade by two or more coats @ 1.43 litres/10 sqm, complete as the direction of Engineer -in-Charge. |
| 66 | Only for Calculation Purpose |
| 67 | As per the CPWD OM dt. 10.08.2022 applicable for 18% GST on DSR items |
