}

Tender For Protection Of Aqueduct At Hindon River And Chemically Repair Of Joints Of Aqueduct Under 200 Cusec Delhi Water Supply Maintenance Scheme, muradnagar-Uttar Pradesh

Uttar Pradesh Jal Nigam-UPJN has published Tender For Protection Of Aqueduct At Hindon River And Chemically Repair Of Joints Of Aqueduct Under 200 Cusec Delhi Water Supply Maintenance Scheme. Submission Date for this Tender is 21-10-2023. Canal Construction Tenders in muradnagar Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

40081792
Tender For Protection Of Aqueduct At Hindon River And Chemically Repair Of Joints Of Aqueduct Under 200 Cusec Delhi Water Supply Maintenance Scheme
Open Tender
Indian
Uttar Pradesh
muradnagar
21-10-2023

Tender Details

Protection Of Aqueduct At Hindon River And Chemically Repair Of Joints Of Aqueduct Under 200 Cusec Delhi Water Supply Maintenance Scheme

Key Value

Document Fees
INR 3540 /-
EMD
INR 31000.0 /-
Tender Value
INR 15.30 Lakhs /-

BOQ Items

Name of Work: ProtectionOf Aqueduct At Hindon River and chemically repair of joints of aqueductunder 200 cusec Delhi Water Supply Maintenance Scheme.
Sl. No. Item Description
1PROTECTION OF AQUEDUCT AT HINDON RIVER 200 CUSEC
2Cleaning of roller bearing of aquaduct and painting and greasing complete including all material, labour, T&P etc. complete and scaffolding etc. complete.
3RCC work with cement, coarse sand and 12mm gauge approved stone ballast in proportion of 1:1½:3 excluding supply of reinforcement and its bending but including its fixing and binding of the same with 0.50mm thick binding wire (to be supplied by the contractors) and including necessary centering and shuttering, nut, bolts etc. and supply of all materials, labour, T&P etc. required for proper completion of the work.
4Dismantling of old loose plaster and cleaning the surface completely disposal of malba / debris to the dumping ground within 100m lead.
5Application of rust remover (Restolene ) on steel bars and also application polymer (Build Crete) in two coats on steel bars and on concrete surface using Restolene. .
612mm thick plaster mixed with water proofing compound of mix 1:4 (Cement and sand) as a protection layer on the treated surface by polymer with W.P. compound only as per manufacturer’s specifications.Also including all scaffolding, shuttering, T&P etc. required for proper completion of the work.
7Finishing / Painting of the external surface of walls with premium acrylic smooth exterior paint (asian apex Ultima paint or its equivalent) of approved shade to give an even shade in two coats after applying priming coat of cement primer including all material, labour T & P etc.
8Dismantling of old damaged stone pitching and re-stone pitching 22.50 cm. thick required work and preparing surface complete inside slopes of Hindon river bund excluding cost of stones but including carting of stones from one place to site of work including supply of labour, T&P etc.
9Raised and cut pointing on stone work with 1:3 cement and fine sand mortar including all material, labour, T&P etc.
10Drilling and fixing injection packers in RC members including, Drilling Holes: Drilling holes in structural members at the intervals as per recommendation of engineer in charge.Cleaning of holes: Clean the holes by air blower prior to fixing nozzles. Fixing of Packers: Insert 12 mm dia., 50~75 mm long injection packers in cleaned holes with moisture insensitive epoxy resin based putty or equivalent. Cutting of Packers: Cut the packers by cut of wheel after completionof grouting without damaging structural elements.Patching Hole:- After cutting of packer we patch the hole on epoxy putty.
11Supply and applysinglecomponent, Polyurethane Injection foam based system for wet condition and temporary sealing, which cures to a dense flexible foam with a fine cellular structure Product Requirements: Viscosity cps 500-1300 at 23°C
12Supply and apply 2 component, elastic, low viscous, solvent free, Polyurethane Injection resin based systemfor permanent sealing, that does not need the presence of water for hardening reaction Product Requirements: Viscosity of mixture < 100 mPa•s (at +20°C) Capable of penetrating cracks>0.2mm wide with a CE Marking (European Conformity) -> Conformance label that product is approved to the essential requirements and under market surveillance
13Making scaffolding and dismantling the same after completion of work including cost of material, labour, T&P, transportation etc. required for proper completion of work.
14Painting with synthetic enamel paint of approved mentioned brand & shade in two coats on old work, ceiling porch, doors etc., including scraping, cleaning of surfaces & removing old loose paint.
15Labour cess@1%
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail