}

Tender For Construction Of Cement Concrete Road From Askar To Lal Mohamadd Sika Via Liyakat Bhati, Sardarshahar, sardarshahar-Rajasthan

Public Works Department-PWD has published Tender For Construction Of Cement Concrete Road From Askar To Lal Mohamadd Sika Via Liyakat Bhati, Sardarshahar. Submission Date for this Tender is 09-10-2023. Road Work Tenders in sardarshahar Rajasthan. Bidders can get complete Tender details and download the document.




Tender Notice

40081608
Tender For Construction Of Cement Concrete Road From Askar To Lal Mohamadd Sika Via Liyakat Bhati, Sardarshahar
Open Tender
Indian
Rajasthan
sardarshahar
09-10-2023

Tender Details

Construction Of Cement Concrete Road From Askar To Lal Mohamadd Sika Via Liyakat Bhati, Sardarshahar

Key Value

Document Fees
INR 500 /-
EMD
INR 11560.0 /-
Tender Value
INR 5.78 Lakhs /-

BOQ Items

Name of Work : Construction of Cement Concrete road from Askar to Lal Mohamadd sika via Liyakat Bhati, Sardarshahar
Sl. No. Item Description
1Construction of embankment with approved materials deposited at site obtained from roadway cutting and excavation from drain and foundation or other structures graded and compacted to meet requirement of Tables 300-1 and 300-2 as per MoRTH Specification Clause 305.3
2Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per MoRTH Specification Clause 301.3
3Carriage of material Earth, Sand, Lime, Morrum manure or sludge for 1 km
4Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRTH Specification Clause 401. For Grading I Material
5Providing,laying,spreadingandcompactingstoneaggregatesofspecificsizestowaterbound macadamspecificationincludingspreadinginuniformthickness,handpacking,rollingwiththree wheel80-100kNstaticrollerinstagestopropergradeandcamber,applyingandbrooming, crushablescreeningtofill-uptheintersticesofcoarseaggregate,wateringandcompactingtothe required density Grading 2as perMoRTH SpecificationClause 404. Using CrusherBroken aggregate
6Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 602.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using water finishing to lines and grade as per drawing and MoRTH Specification Clause 602 including vaccum dewatering process with all required equipments
7Constructionof Foundation / Inaugration Pedastal in 23 cm thickBrick masonry in CM 1:4ofsize1.20mx1.80mabovegroundlevelwithadequatefoundationincluding providingandfixingofGranitestoneofsize0.75mx0.60mwith engravinglettersand figures,cementplaster,whitewashingetc.completeasperdirectionofEngineerin charge
8P& F Mukhya Mantri Sadak Yojana logo for roads funded by State road fund having M.S. Definition plate of 1.6mm thickness frame to steel hollow dsection of 75mm x 75mm, 2.5m long stove enamelled paint with hold fast including paint logo as per approved design and colours. The logo shall be made out of 1.6mm thick circular plate fix on 1200mm x 150mm rectangular steel base plate 1.6mm thick, the base of circular shall be plain at the junction of base plate. The size of definition plate shall be 1500x600mm and embedding the posts by M-15 mix C.C. block 300x300x600 mm including lettering / writing and painting etc. complete in all respect
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail