Municipal Corporation-MC has published Tender For Annual Repairing Of 150 H.P Non Clog Aqua And Kishor Make Sewage Submersible Motor Pump Sets At Mps Gaughat And Ips Manchaman Sewage Pumping Station. Submission Date for this Tender is 06-11-2023. Submersible Pump Tenders in ujjain Madhya Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Complete repair of 150 HP Aqua & Kishor make non clog sewage submersible motor pump sets at MPS Gaughat & IPS Manchaman sewage pumping station including following works. |
2 | Transportation of motor pump set from site to work shop and after repair work shop to site loading unloading by crane. |
3 | Complete dismantling of the motor pump set carefully and cutting and removing of old burnt copper wire from stator & cleaning ofstator slot by CTC. |
4 | Providing and fixing of super enameledF–class hermetic polyester insulation copper winding wire. (65 Kg. each) |
5 | Providing of insulating material F-class insulating paper, fiber glass tap root, impair cloth, soldering wire etc as per required. |
6 | Cleaning of stator winding removing moisture & varnishing of stator winding by Dr. Back varnish, drawing and Labor charges for fully rewinding of motor. |
7 | Providing and fixing of bearing No. BECBM 7220 & BECBP 7319 SKF make |
8 | Providing and fixing of upper bearing No. NTN 216 Z & 6316 SKF make |
9 | Providing and fixing of mechanical oil seal TC make carbon oil seal complete size 90 m.m. |
10 | Providing and fixing of“O‘’ ring. |
11 | Providing of cooling oil(15 Lit. each) |
12 | Making & fixing of s.s. check nut as per size for impeller. |
13 | Providing & fixing of s. s. cup type fasteners as per sample.(16 No. each) |
14 | Taking out of rotor shaft impeller side metal filling on pump shaft and re threading as per required size and re threading ofchapping plate and complete fitting of rooter assembly and chapping plate. |
15 | Complete refitting of motor pump set inside the sump well i/c cable connection, etc pump on foundation and trial & testing with complete loading and unloading by crane. |
16 | Providing & fixing of new stainless steel nut bolt of size 25 mm. × 100 mm. |
17 | Complete repair & welding work of motor pump set locking thiya by using 12 m.m. plates & making new locks, holes etc. work. All work directed by engineer in charge. |
18 | Complete repair & refitting of chaping plate including cutting & welding work. |
19 | Providing & labor charge for cleaned with use of sent paper & scaper for the motor pump & parts. Where to be required and after that Redoxide to be done at required parts than two coats of as per required oil paints for motor pump and parts. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail