Tender For Purchasing Of Truck Mounted Based Road Sweeping Machine Under Municipal Council Chhatarpur, chhatarpur-Madhya Pradesh

Purchasing Of Truck Mounted Based Road Sweeping Machine Under Municipal Council Chhatarpur , Purchasing Of Truck Mounted Based Road Sweeping Machineunder Municipal Council Chhatarpur , Truck Mounted Based Road Sweeping Machine A Vehicle Chassis Mounted, Vacuum Mechanical / Power Road Sweeper Designed To Clean Withefficiency, City Roads, Large Parking Lots, Market And Commercial Areas, Residential Blocks Etc. Detail Technical Secification Atteched Separately ( 1 ) Type: Road And Curb Suction Sweeper ( 2 ) Sweeping Width: 2300 -2600 Mm ( Suction Nozzle + One Side Brush ) ( 3 ) Container Volume: 6.00 Cu.M. ( 4 ) Container Discharge: By Tipping: Tipping Angle 40-50 O ( 5 ) Dumping Height: Min 1100Mm ( Chassis Dependent ) ( 6 ) Channel Brush: Dia. 850 Mm Channel Brush Stock With Alloy Steel Tines ( 7 ) Wide Sweep Brush: Dia. 400 Mm Poly Segment Brush Stocks ( 8 ) Suction Hose: Heavy Duty, Flexible Hose, And 150Mm Diameter Having An Adequate Length Of3 To 4 Mtrs. ( 9 ) Dust Suppression: Water Spraying System In The Front And Around Brush Enclosures Andsuction Nozzles ( 10 ) Cleaning Of Footpaths & Gully Pits: Suction Hose. ( 11 ) Auxiliary Engine: Diesel Engine, Direct Injection In-Line, Multi Cylinder. ( 12 ) Transmission: Blower Drive Through An Auxiliary Engine Over A Compact Step-Up Gearbox ( 13 ) Sweeping Speed: A Max Of 5- 10 Km / H ( 14 ) Exhaust Dust Control - Blower Or Impeller Fan Exhaust Should Maintain The Pm-10 & Pm 2.5 Pollution Control Norms, Filter Bags Fitted In Between Container And Blower Should Capacity Stop Passing More Than 2.5-Micron Particles In Environments. Technical Requirement Of Truck Chassis Mounted Vacuum Road Sweepingmachine ( Dry And Wet ) Of 6.0 Cubic Meter Capacity. :: 2 :: ( 15 ) Air Filtration Steps:- Cyclonic Separator - The Material Along With Air Hits The Cyclonic Separator And Separatematerial And Air. The Heavy Material Fall Down And Air Along With Dust And Small Particles Goes To Mesh Filter Sieving - Air Along With Dust Is Passed And Small Particle Remain Back Cartridge Filter-Only Air Is Passed Through The Filter And Dust Is Accumulated In A Compartment. ( 16 ) Filter Bag Cleaning System: - An On Line Reverse Pressure Pulse-Jet System Will Be Provided To Continuously Clean The Filter Cartridges. The System Is Automatic, Timer Controlled, Reverse-Air Pulse-Jet System, Having Its Own Independent Supply Of Compressed Air. The Pulse-Jet Filter Cleaning Mechanism Generates A Short, Powerful Burst Of Induced Airflow Into The Top Of The Bag. The Compressed Air System Will Come Equipped With Its Own Compressor, Air Reservoir, And An After Air Cooler. ( 17 ) Reverse Horn- Audible Reverse Horn Shall Be Provided With The Equipment.

INR 12500 /-

INR 67500.0 /-

INR 1.35 Crore /-

Name of Work: Purchasing of Truck Mounted based Road Sweeping Machineunder municipal council chhatarpur

Sl. No.	Item Description
1	Purchasing of Truck Mounted based Road Sweeping Machineunder municipal council chhatarpur
2	Truck Mounted Based road Sweeping machine A vehicle chassis mounted, vacuum Mechanical / Power road sweeper designed to clean withefficiency, City Roads, large parking lots, market and commercial areas, residential blocks etc. Detail Technical Secification atteched separately(1) Type: Road and Curb suction sweeper (2) Sweeping width: 2300 -2600 mm (suction nozzle + one side brush) (3) Container volume: 6.00 CU.M. (4) Container discharge: By tipping: Tipping angle 40-50 O (5) Dumping Height: MIN 1100mm (chassis dependent) (6) Channel brush: Dia. 850 mm Channel Brush Stock with Alloy Steel Tines (7) Wide Sweep brush: Dia. 400 mm Poly Segment Brush Stocks (8) Suction hose: Heavy duty, Flexible hose, and 150mm diameter having an adequate length of3 to 4 Mtrs. (9) Dust suppression: Water spraying system in the front and around brush enclosures andsuction nozzles (10) Cleaning of footpaths & Gully Pits: Suction hose. (11) Auxiliary engine: Diesel Engine, direct injection in-line, multi cylinder. (12) Transmission: Blower drive through an auxiliary engine over a compact step-up gearbox(13) Sweeping speed: A max of 5- 10 KM/H (14) Exhaust Dust control - Blower or impeller fan exhaust should maintain the PM-10 & PM 2.5 pollution control norms, Filter bags fitted in between container and blower should capacity stop passing more than 2.5-micron particles in environments. TECHNICAL REQUIREMENT OF TRUCK CHASSIS MOUNTED VACUUM ROAD SWEEPINGMACHINE (DRY AND WET)OF 6.0 CUBIC METER CAPACITY. :: 2 ::(15) Air filtration steps:- Cyclonic Separator - The material along with air hits the Cyclonic separator and separatematerial and air. The heavy material fall down and air along with dust and small particles goes to mesh filter Sieving - Air along with dust is passed and small particle remain back Cartridge Filter-Only air is passed through the filter and Dust is accumulated in a compartment. (16) Filter Bag Cleaning System: - An on line reverse Pressure pulse-jet system will be provided to continuously clean the filter cartridges. The system is automatic, timer controlled, reverse-air pulse-jet system, having its own independent supply of compressed air. The pulse-jet filter cleaning mechanism generates a short, powerful burst of induced airflow into the top of the bag. The compressed air system will come equipped with its own compressor, air reservoir, and an after air cooler. (17) Reverse Horn- Audible reverse horn shall be provided with the equipment.