Tender For Renovation Work Of Left Canal Track Till 13.50. Below Sharda Main Canal. Less Than 11.20.
Tender Value
33 Lakhs
Estimated cost
Bid Submission
11 Oct 2023
0 days left
EMD
66000
Bank guarantee accepted
Document Fee
354
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
banbasa → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Renovation Work Of Left Canal Track Till 13.50. Below Sharda Main Canal. Less Than 11.20.
BOQ
| Sl. No. | Item Description |
| 1 | Cleaing thick bhushses and throny jungle with out uprooting. including all cost of materials, labour, T&P etc. required for proper completion of work as directed by Engineer-in-charge. |
| 2 | Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material within all lifts and lead (by mechanical means) including all cost of materials, labour, T&P etc. required for proper completion of work as directed by Engineer-in-charge. |
| 3 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with threewheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 (with 22.4 - 53 mm size st. ballast) as per Technical Specification Clause 405. |
| 4 | Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaing of road surface and spraying primer at rate of 0.70 kg/Sqm using mechnical means as per Technical Specification Clause 502. |
| 5 | Providing and applying tackcoat with Bitumen (VG-10) using Bitumen distributor at the rate of 0.20 kg per sqm on the prepared granular surface treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503. |
| 6 | Providing laying and rolling of open graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on previsoly prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of Typeas per Technical Specification Clause 508. |
| 7 | Providing and laying seal coat by manual means with (VG-10) Grade Bitumen sealing the viodes in a bituminos surface laid to the specified levels, grade and cross fall using TypeC as per Technical Specification Clause 510 |
| 8 | Brick edging on both sides of the road of over burnt dry bricks 8 cm (3\") wide and 12 cm. 41/2 deep laid with mud mortar including labour and supply of. Bricks finished to requied template andproper alligment and icluding dressimg and ramming the excuted earth as direction Engineer-in-Charge . |
| 9 | Brick soling with brick laid on edge straight over burnt dry bricksincluding prepration of sub-grade and filling joints with local Sand,including cost of all material, labour and T&P etc. required for proper completions of the work. |
| 10 | Painting Lines, Dashes, Arrows, etc. on Roads in Two Coats on new work. Painting lines, dashes, arrows, etc. on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control. including cost of all material, labour and T&P etc. required for proper completions of the work. |
| 11 | Providingand Fixing of typical Irrigation canal informatory sign board size (1.25x0.80) on MS plate of 1.60 mm thickness duly welded with MS flat iron 35mmX 5mmsize on bock on edges. With MS angle iron frome of 35X35X5 mm enbedded in cement concrete M-15 grade block of 300X300X600 mm below ground level. lettering and printing logo etc. will be painted with ready mixed synthetic enamel paint of approved qualitiy in required shade and colour all skeltons of framed post and plate will be painted with primer and two coats expoxypaint including supply of material labour T&P etc required for proper completion of work. |
AI Tender Summary
Tender Timeline
Oct 06, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedOct 11, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 11, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender