|
| 1 | Painting & numbering 11KV/33KV HT poles in estate as well as inside the factory area and painting of building lightning protection poles inside the factory area. |
| 2 | Preparation of old painted metallic surface of electric poles/lightning protection poles of height approx. 8.5 to 10 Metre and any description over 10cm in width or girth not otherwise described. |
| 3 | M & L for priming with one coat of red oxide zinc chrome on steel/iron surfaces of electric poles/lightning protection poles of height approx. 8.5 to 10 Metre and any description (i.e. HT Poles & It\"s Connected Structures) over 10cm in width or girth not other wise described. Paint shall be confirming to relevant IS standards. |
| 4 | M & L for painting with two coats of black bituminous paint on the primed surface of steel/iron surfacesof electric poles / lightning protection poles upto a height of 0.3 m from the coping of pole andof any descriptionexceeding 10cm in width or girth. Paint shall be confirming to relevant IS standards. |
| 5 | M & L for painting with two coats of aluminium paint on the primed surface of steel/iron surfaces electric poles/ lightning protection poles beyond 0.3 m from coping upto a height of approx. 8.5 to 10 metre andof any descriptionover 10cm in width or girth not other wise described.Paint shall be confirming to relevant IS standards. |
| 6 | Applying two coats of yellow colour synthetic enamel paint in circular design of diameter 15 cm on the aluminium painted surface of electric poles at a height of 1.5 to 2 m from ground level and of any description over 10cm in width or girth , ot otherwise described to number the poles. Paint shall be confirming to relevant IS standards. |
| 7 | Writing of letters of figures(Indian) on HT Pole 5 cm height in thick black paint for identification numbering .of pole structure/ name plate at a height of 1.5 to 2 m. Paint shall be confirming to relevant IS standards. |
| 8 | Writing of Short line, hyphen, oblique in thick black paint on pole surfaces required forHT pole numbering at a height of 1.5 to 2 m. Paint shall be confirming to relevant IS standards. |
| 9 | Writing of letters of figures(Indian)of2 cm height in thick black paint at existing caution board/name plateof HT structure at a height of 1.5 to 2 m. Paint shall be confirming to relevant IS standards. |
| 10 | Writing index hand or arrows (up to 40cm long)in thick black paint at existing caution board/ name plate at a height of 1.5 to 2 m. Paint shall be confirming to relevant IS standards. |
| 11 | Preparation of old painted surface of electric poles of height approx. 8.5 to 10 Metre andany description over 10cm in width or girth not otherwise described. |
| 12 | M & L for priming with one coat of red oxide zinc chrome on steel/ iron surfaces of electric poles of height approx. 8.5 to 10 Metre and any description over 10cm in width or girth not other wise described. Paint shall be confirming to relevant IS standards. |
| 13 | M & L for painting with two coats of black bituminous paint on the primed surface of steel/iron surfaces of electric poles upto a height of 0.3 m from the coping of pole and of any descriptionexceeding 10cm in width or girth. Paint shall be confirming to relevant IS standards. |
| 14 | M & L for painting with two coats of aluminium paint on the primed surface of steel/iron surfaces of electric poles beyond 0.3 m from coping upto a height of approx. 8.5 to 10 metre and any descriptionover 10cm in width or girth not other wise described. Paint shall be confirming to relevant IS standards. |
| 15 | Applying two coats of yellow colour synthetic enamel paint at a height of 1.5 to 2 m from the ground level in circular design of diameter 15 cm on the aluminium painted surface of electric poles of any description over 10cm in width or girth , not otherwise described to number the poles. Paint shall be confirming to relevant IS standards. |
| 16 | Writing of letters of figures(Indian) on HT Poleof5 cm height in thick black paint at a height of 1.5 to 2 m from the ground level for identification numbering of pole structure. Paint shall be confirming to relevant IS standards. |
| 17 | Writing of Short line, hyphen, oblique in thick black paint at a height of 1.5 to 2 m from the ground level on pole surfaces required forHTpole numbering. Paint shall be confirming to relevant IS standards. |
