Electronics Corporation Of Tamil Nadu Limited-ELCOT has published Tender For Providing Interior Works For Elcot Corporate Office At Urban Administrative Building Mrc Nagar Chennai. Submission Date for this Tender is 20-10-2023. Interior Work Tenders in chennai Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Price Bid |
| 2 | Providing and constructing cement concrete solid block masonry work at all levels in cement mortar 1:3 using standard size of 400 x 200 mm of solid cement concrete blocks of thickness as given below, with minimum compressive strength of 5 N / Sq.mm. conforming to IS 2185 or equivalent BS and Fly ash conforming to IS : 3812 (Part III)-1966* may be used for part replacement of fine aggregate up to a limit of 20 percent. including all scaffolding, staging, curing, all lifts etc. complete and as directed. Concrete blocks manufactured under strict quality control conditions using modern rugged block casting and stripping machine with the latest moulding techniques etc. only shall be used. (Rate to include the column and fixing 200 mm long 50 x 4 mm hick MS bend to shape with anchor bolts at every fifth course the rate is inclusive of case of fabrication structural steel with all leads and lift) Note: All mortar to be machine mixed etc., Complete complying with standard specifications and as directed by the "Engineer-in-charge/Architect". (100mm thick wall) |
| 3 | Plastering of 12mm thick plaster on internal surfaces of RCC/brick/block walls in cement mortar 1:5 (1 of Cement : 5 of P.Sand). Rate shall include for scaffolding, drip band / grooves of any size and shape, curing, surface preparation before the application of plaster, providing galvanized mesh to a width of 150mm at the junctions of masonry and concrete works, wherever conduits and pipes are concealed and packed in the wall; and also providing and fixing of galvanised corner beeds for all corners/ edges of columns and walls including tying in position by using suitable nails / clamps / screws and as directed etc. complete at all levels. Rate to include screening and washing of sand and all mortar for plastering to be machine mixed etc., Complete complying with standard specifications and as directed by the "Engineer-in-charge/Architect". |
| 4 | Plastering of 12 mm thick water proof plaster in Toilet internal walls and over head tank with CM 1:3 (1 of cement : 3 of P.Sand) with water proofing compound of CICO No:1 or equivalent as per manufacturer’s specification and roughening the surface in green condition with wire brush and clearing of loose particles with sponge brush (washed sand finish) etc., Complete complying with standard specifications and as directed by the "Engineer-in-charge/Architect". |
| 5 | Providing and applying two coats of Acrylic emulsion paint with low of approved colour over a coat of water based primer including preparation of surface by thorough cleaning and applying two coats of premixed putty as per manufacturer’s specification fully to give an even shade before painting and curing etc., Complete complying with standard specifications and as directed by the "Engineer-in-charge/Architect". (Walls and Partitions) |
| 6 | Providing and applying of Texture paint of approved make to walls of approved colour over a coat of primer as per manufacture specification. The rate shall be including preparation of surface by thorough cleaning and as per manufacturer’s specification fully to give an even shade as directed etc., Complete complying with standard specifications and as directed by the "Engineer-in-charge/Architect". |
| 7 | Providing flooring with best quality approved make Anti Skid Ceramic tiles ranges, from approved make to the pattern as shown in the Architectural Drawing. The size of tile shall be as per the samples approved, set in CM 1:4, 20mm thick and pointing thejoints with white cementto matching colour shade as per Manufacturer"s Specification and as directed. Rate shall include for preparation of base surface, and finishing the surface, cleaning the surface, and protecting with Gypsum / POP layer over Plastic sheet and removing the same before handing over, work at all levels etc., Complete complying with standard specifications and as directed by the "Engineer-in-charge/Architect". Size of tiles shall be 300mm x 300mm x 6 to 7mm. |
| 8 | Providing Dadoing with best quality Ceramic tile of approved make and size set in cement mortar 1:3 (1 of Cement : 3 of manufactured sand), pointing the joints with white cement compound and matching corner tile beading. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportation charges, loading, unloading, chasing of wall for flushing the tile inline with wall surface, preparation of surface, necessary hacking in RCC surface, cutting of tiles to required shape, edging, tools and plants, fuel, curing,cleaning, acid wash over finished surface, protection with Gypsum/Pop layer over Plastic sheet and removing the same before handing over etc., Complete complying with standard specifications and as directed by the "Engineer-in-charge/Architect" (Kitchen & dish wash-Size of Tiles shall be-600 x 600mm x 6 to 7mm). |
| 9 | SINGLE GLAZED TOUGHENED GLASS PARTITIONS - 45 FRAME PROFILES Supplying and fixing of Slim Glass partition of 10mm Toughened Glass using Dormakaba Alexa System-45 Frames to a height of maximum 3m or as per drawing.The Fixed glass to be fixed using Dormakaba Alexa BP45 Profiles at Top & Bottom & Alexa SP45 at sides. The profile size to be 45x25MM to be fixed on to the floor/wall/ ceiling as per the architect design. Dormakaba Alexa H Junction profile to be used at all Glass to Glass vertical joints, 90 Deg L Junction Profiles and T Junction profiles necessary as per design.In case of Glass overall panel Alexa MP45 & BP45 Overpanel Profile to be used In case of Open glass edges EP45 End Profile to be used. The Alexa profiles shall be suitable for Glass thickness of 10/12/13.52mm.The Profile shall be matt natural anodized, the Profile Manufacturer to supply all the necessary clips, seals and fixing accessories for the system. All Profiles to be with 2mm Gauge thickness Excluding 20 Micron of Anodizing. Approved Manufacturer: Profiles/Frames: Dormakaba, Glass : Saint Giobain/Asahi etc., Complete complying with standard specifications and as directed by the "Engineer-in-charge/Architect". |
| 10 | Designing, Printing, Supply and Fixing of Frost film to glass partitions using 3M frosted film stickers as per required pattern and shape and as directed.Cost inclusive of designing, mockup and installation with all accessories. The vendor must submit required warranty certificates from the manufacturer. Working at all levels and heights etc., Complete complying with standard specifications and as directed by the "Engineer-in-charge/Architect". |
| 11 | Providing and fixing of Aluminium base framesas shown in the Architectural Drawing for full height solid drywall partitions, suspended partitions and cladding with Aluminium extruded box sections of size 50 x 25mm x 1.5mm thick in both horizontal and vertical direction at 600 mm c/c spacing.The framework to have 25 x 25x 1.5mm GI "L" angle cleats fixed to Aluminium box section at the top and bottom. All the vertical frames shall be continuous and should be anchored to the floor and soffit of slab. Alternate vertical frames should be anchored to the soffit of RCC slab with additional "Y" supports. The cost to include necessary hardware as required to complete the works as per the manufacturer"s specification. Actual laid area will be measured and paid. Working at all levels and heights etc., Complete complying with standard specifications and as directed by the "Engineer-in-charge/Architect". Note: 1.Actual laid area will be measured and paid. Doors, glass panels and Windows provided in the partition the area will be deducted. 2. No deductions for service penetrations. 3. Rate to include additional supports for large service openings. 4. Applying acoustic sealant between the floor and floor sections / Ceiling and ceiling sections 5. Necessary Aluminium box section backing to be provided for handing the soft board / white board panels. 6. Vendor to quote only for frames along with accessories as described above. First and second skins will be given under relavent item. 7. Rate to include for curve/ circular and any other shape etc., (Partitions, Suspended partitions & Columns) |
| 12 | First skin / Second Skin : Providing and Fixing of Gypboard to the Aluminium / GI partitions and the joints between the gyp-boards are fixed with 25mm drywall screws at 300mm center to center and are finished flush with jointing compound and paper tape, top coat, necessary accessories and all as per manufacturer’s specification etc. complete and as directed.Rate inclusive of fixing with necessary accessories, cutting for switches and sockets, necessary GI backing etc., Complete complying with standard specifications and as directed by the "Engineer-in-charge/Architect".Mode of measurement - Actual laid area will be measured and paid. Deduction will be made for Writing board / Soft board in the second skins.Note: The second layer should be fixed in staggered pattern to keep away the joints of first and second layer. 12.5mm thick plain gypsum board of density not less than 640 kgs /m3 |
| 13 | Providing and fixing of 1mm thick laminate as shown in the Architectural Drawing from approved color and shade with grooves and lines and in patterns on specified area as instructed by Architect / Client. The cost of necessary hardware"s, adhesives, wastages etc., as required for complete the works. Actual visible surfaces only will be measured and paid. Working at all levels and heights etc., Complete complying with standard specifications and as directed by the "Engineer-in-charge/Architect". 1mm thick laminate of approved color and shade |
| 14 | Glass Door - With Stile Supply & Fixing of Aluminium Glazed Door (Single / Double Leaf) with Glass infill of 10mm thick toughened glass with -100 frames Stiles all around the door. Aluminium Stile to be formed out of 100x45mm of Door Profile frame with clips & seals. For doors part of single/double glazed partiton DP100-SG/DG Door rebate profile to be used. In case of Glass overall panel OHPDP100-SD/DG Over Panel Door profile to be used.The profiles shall be suitable for Glass thickness of 10/12/13.52mm.The Profile shall be matt natural anodized, the Profile Manufacturer to supply all the necessary clips, seals and fixing accessories for the system.All Profiles to be with 2 mm Gauge thickness Excluding 20 Micron of Anodizing etc., Complete complying with standard specifications and as directed by the "Engineer-in-charge/Architect". NOTE: Hardware will be measured seperately and paid under relevant BOQ items. |
| 15 | Single Door - 900mm x 2400mm |
| 16 | Double Leaf - 1800mm x 2400mm |
| 17 | Supply and installation of acoustic wall panels to a recycled PET/ Wood wool / Polyester fabric, fixed over the existing partitions / walls with adhesives. Spacing between the panels to be as per manufacturer"s specification. Rate shall be inclusive of adhesives, brackets, wastages, all accessories and scaffolding at all heights. Rate to include wall mounting hardware with peripheral edge trim - Aluminum Anodised U or T shaped 6mm profile etc., Complete complying with standard specifications and as directed by the "Engineer-in-charge/Architect". 12mm thk |
| 18 | Providing and fixing of 50mm thick Rock wool of density 48 kgs/m3wrapped with 40GSM fiber glass tissue in drywall partition with holding clips to make it as acoustic proof. It shall be placed in the Aluminium frame cavity. The contractor must ensure that the wool is either wire-braced or holded with clips to prevent it from ‘lumping down’ over a period of time.Working at all levels and heights etc., Complete complying with standard specifications and as directed by the "Engineer-in-charge/Architect". |
| 19 | Supply and Installation of Acoustic suspended Baffle Ceilingsas shown in the Architectural Drawing, from Senses Akoutik or approved equivalent make, suspended vertically with thickness not less than 20mm of approved colours to be hanged to the ceiling/ soffits. Baffles should be made up of Recycled PET or felt. The length of each baffle to be as per drawings and the spacing as per manufacturers specification or as directed etc., Complete complying with standard specifications and as directed by the "Engineer-in-charge/Architect". Must comply with the following criteria Sound absorption Test according to EN ISO 354 Sound absorption co efficient according to EN ISO 11654 NRC ratings according to ASTM C 423 Certificate for indoor climate labeling The rate quoted for baffle ceiling system shall include necessary cables, hangers, clips, anchor bolts, connecting clips and other accessories for hanging, scaffolding arrangement, wastages etc, Working at all levels and heights and as directed by Engineer- in- Charge. The length and height of the baffles will be measured and paid. |
| 20 | Supply and Installation of Teak wood frame with 35mm thick Flush door shutters with Vision panel, made of solid core block board type bonded with synthetic resin thermo pressed with 1.5 / 2mm thick PVC edge beading of approved shade. Synthetic resin to comply with IS 848 -2006. The construction procedure of the shutter should be as per IS:2202 - Part1 and 2 and should be fully organic preservative treated as per IS 401. The shutter shall be shop prepared for taking mortise lock or latches suitable with block of wood may be provided for fixing the hardware. The size of block, shall perfectly correspond to the maximum size of lock, covered in IS:2209. All the four edges of the door shutter shall be square. The shutter shall be free from twist or warp in its plane and of required size etc.; complete as directed. The vision panel to be with toughened glass and wooden beadings, all around finished with approved colour paint. Both sides of the door shall be finished with either 4mm thick Veneer or 1.5 mm thick laminate of approved color / pattern. Rate to include installation of door, laminate and veneer with PU polish, necessary accessories for fixing for complete installation., Working at all levels and heights etc., Complete complying with standard specifications and as directed by the "Engineer-in-charge/Architect" (D1 - 900x2100mm) |
| 21 | Supplying and installation of Modular Carpets made with 100% nylon 6 or 6.6 manufactured using digital injection or 100% solution dyeing process. The carpet should have protective treatment for soils, stains and anti microbial additives. The backing shall be with either PVC free PU underscore cushion or recyclable / recycled PET hard backing as per manufacturer"s specification and as required by the Engineer-in-charge/ Architects/ Clients/PMC. Carpet to meet ARR - Severe Rating as per CRI TM 101 and CRI LEED certified. The installation of carpet should be with green adhesive of approved make, all complete as per manufacturer"s specifications. Working at all levels and heights etc. The laying pattern should be as per Architect"s inputs and approval etc., Complete complying with standard specifications and as directed by the "Engineer-in-charge/ Architect". The quoted rate shall be inclusive preparing the surface and laying of carpet tiles optimized for glue-free installation with tactile connectors or with adhesives virtually VOC less than 50 grams/ litre for fixing over existing flooring as per Manufacturer"s specification. Method of Measurement: Supply and Installation: Actual laid area will be measured and paid as per the site conditions under the respective items. Attic Stock: Number of factory packed cartons handed over to Clients / PMC which will be measured in Sqm, under the respective items. |
| 22 | Warranties: Carpets should have minimum 15 Years warranty against Delamination of backing, Stain resist, antistatic, face fiber wear, dimensional stability, fla Albansbility, tufted bind, colourfastness to light and atmospheric contaminants etc., Vendor Should submit warranty certificate satisfying the above criteria. Shape and Size - Square / Plank Construction - Tufted Surface Texture - Textured Patterned Loop / Texture Loop Multilevel Pattern cut /loop pile / Random Tipshear Tufted Face Weight: Not less than 18.0 oz./yd2 Stitches per inch: Not less than 9 Gauge: 1/12" Finished pile thickness: Not less than 0.1" Average Density: In the range of 6000 oz./yd3 |
| 23 | Supply and installation of LINEAR WORKSTATION SIZE: 900L X 600D X1050HT SYSTEM: CONNECT LEG. Specifications Table Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges. Main Screen: 900Lx 300Ht mm 18mm thick fabric Soft board screen with mounted on MS powder coated studs. Support: End Legs: MS powder coated Connect legs. Intermediate Legs: MS podwer coated legs and supporting MS cross beams. Modesty: 18mm thick PLBmodesty 450ht mm considered on leg side whereever requuired. Wire Management 400mm anodized flip-up box Flip down cable traywith provision to mount swicthes and sockets on laminate facia with Vertical Wire Entry cover for wire uptake from floor to raceway with 400mm Flip up for Wire Manager. |
| 24 | Supply and installation of L-SHAPE WORKSTATION SIZE: 1500L X 1500D X1050HT SYSTEM: CONNECT LEG Specifications Table Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges. Main Screen: 1500Lx 300Ht mm AL 30mm thik Fabric magentic + fabric screen with mounted on table top. Support: End Legs: MS powder coated Connect legs. Intermediate Legs: MS podwer coated legs and supporting MS cross beams. Modesty: 18mm thick PLBmodesty 450ht mm considered on leg side whereever required. Wire Management 450mm anodized flip-up box Flip down cable traywith provision to mount swicthes and sockets on laminate facia with Vertical Wire Entry cover for wire uptake from floor to raceway with 450mm Flip up for Wire Manager. |
| 25 | Supply and installation of CABIN TABLE WITH SIDE STORAGE UNIT Main table Size: 1800LX 700D X 750HT mm Side storage Unit Size: 1000LX 450D X 750HT mm Specifications Table Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges Support: End Legs: MS powder coated Connect legs. Modesty Panel: 18mm PLBmodesty panel with 450mm Ht Wire Management: 450mm Wire Manager Flip up with cable dump. Specifications for Storage: Top & Sides: 18mm Thk pre laminated particle board Back: 9mm Thk pre laminated particle board Edge: All exposed area with 2mm thick PVC edge lipping Handle: Finger groove handle Lock: Regular lock |
| 26 | Supply and installation of CABIN TABLE WITH SIDE STORAGE UNIT Main table Size: 1500LX 700D X 750HT mm Side storage Unit Size: 1000LX 450D X 750HT mm Specifications Table Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges Support: End Legs: MS powder coated Connect legs. Modesty Panel: 18mm PLBmodesty panel with 450mm Ht Wire Management: 450mm Wire Manager Flip up with cable dump. Specifications for Storage: Top & Sides: 18mm Thk pre laminated particle board Back: 9mm Thk pre laminated particle board Edge: All exposed area with 2mm thick PVC edge lipping Handle: Finger groove handle Lock: Regular lock |
| 27 | Supply and installation of 20 PAX CONFERENCE TABLE- ENRICH LEGS Size: 6250LX 1800D X 750HT mm Specifications Table Top: 25mm thick Pre laminate particle board with reverse water fall edge. Support: End Legs: MS powder coated Enrichlegs. Intermediate Legs: MS podwer coated legs and supporting MS cross beams. Wire Management: Vertical wire entry cover for wire uptake from floor to cable tray and 450mm Aluminium Flip Up for swicth access |
| 28 | Supply and installation of MD & ED TABLE WITH SIDE STORAGE UNIT Main table Size: 2400LX 1000D X 750HT mm Side storage Unit Size: 1350LX 600D X 750HT mm 1. Environmental friendly E1 grade partical board with melamine finish;2. Table top is 60mm thickness;3. Thicken modesty panel with aluminium strips decoration;4. Side return drawer with three-ball bearing slide; |
| 29 | Supply, Installation and positioning of Custom made Meeting Room Table - 8 Persons (3600 x 750 x 750mm) made to shape and pattern as shown in the detail Architectural Drawing. |
| 30 | Supply and installation of DiningTable-1560mmx600X750mm 25mm thick E1 grade PLPB table top with matching edgebanding with aluminum flip up provision of size:- 500mm(W)x135mm(D) only anodized finish. End Legs:- TIMBER series wooden leg with Polished finish in anguler profile with round front edge and straight back side edge with powder coated die cated supporting bracket + Mid legs: 30mm x 60mm CRCA Powder coated Legs & CRCA Powder coated beams are considerd for supporting table top. |
| 31 | Supply and installation of PLB MOBILE PEDESTAL Size: 400LX 450D X 600HT mm Specifications: Top & Sides: 18mm Thk pre laminated particle board Back: 9mm Thk pre laminated particle board Edge: All exposed area with 2mm thick PVC edge lipping Handle: Finger groove handle Lock: Regular lock |
| 32 | Providing and fixing of filing compactor (Optimizer 3000x 500 x 1980mm) units of Wintech,Kompress or approved equivalent make as per manufacturer"s specification (all sample & record room) etc., complete complying with standard specification and as directed by the "Engineer-in-charge" |
| 33 | Supply and installation of Reception - Table 2400 x 600 x 750 mm made to shape and pattern as shown in the detail Architectural Drawing. |
| 34 | Supply and installation of MD room Cupboards made to shape and pattern as shown in the detail Architectural Drawing. |
| 35 | Supply and installation CHAIR of MODEL: Winger; Code: CWG64SW-2 Finish: Black nylon frame with Black nylon support Arms:2D Adjustable Armrest - Height and front and back. Backrest:Mesh back, Seat: Fabric elastic foam seat with mesh covered Mechanism: Synchronized tilting mechanism with Three-positions lockingLumbar Support:Height Adjustable lumbar support with cushion. Cylinder: High quality gas-lift Base: Black nylon Five-Star base with PA Castors 10 Years warranty: BIFMA Certified |
| 36 | Supply and installation CHAIR LIBERATE (MESH) HB ML ADJ ARMS * Liberate High Mesh Back Chair * IS 20D Mesh * With Head Rest * Multilock Mechanism * One Way Adjustable Arms ( Height ) * Chrome Base *Fabric Upholstered Cushion Seat 10 Years warranty: BIFMA Certified |
| 37 | Supply and installation Executive Chair PIXEL HB - Leather ( Body Touch ) • High Back Chair • Seat & Back Leather ( Body Touch ) • Multilock with Knee tilt Mechanism • Aluminum Fixed Arms • Aluminum Base with 60mm castors. Colour : Black,Grey & Tan 10 Years warranty: BIFMA Certified |
| 38 | Supply and installation Chair MODEL: IRON; Code: CIR71GW-2 Finish: Black nylon frame with Black nylon support Arms:Fixed Armrest Backrest:Mesh back, Seat: Fabric elastic foam seat with mesh covered Lumbar Support:Height Adjustable lumbar support with cushion. 10 Years warranty: BIFMA Certified |
| 39 | Supply, Fixing, Testing and Commisiosning of 9U Wall Mount Rack (33592-A12-RACK-003 | Make: Plexonics | Model: PL-1209U-4RK) as directed by the departmental officers and the brand should be got approval. |
| 40 | Supply, Fixing, Testing and Commisiosning of Power Strip 3 Pin 5A & 4 Socket with surge Protector (33592-A12-R-ACC-001 | Make: Plexonics | Model: PL–PS04S–5A-SRK) as directed by the departmental officers and the brand should be got approval. |
| 41 | Supply, Fixing, Testing and Commisiosning of 90Cfm Fans, 115~240V AC Fan for Above racks (33592-A12-R-ACC-005 | Make: Plexonics | Model: PL-FAN-RK) as directed by the departmental officers and the brand should be got approval. |
| 42 | Supply, Fixing, Testing and Commisiosning of CAT 6 cable 4 pair UTP Cable (33592-A12-CAB-001 | Make: Plexonics | Model: PL-064P3-UTP) as directed by the departmental officers and the brand should be got approval. |
| 43 | Supply, Fixing, Testing and Commisiosning of Cable laying charges per mtr (33592-A12-PC-LAB-016) as directed by the departmental officers and the brand should be got approval. |
| 44 | Supply, Fixing, Testing and Commisiosning of 1" PVC /Conduit charges per mtr (33592-A12-PC-ACC-025)as directed by the departmental officers and the brand should be got approval. |
| 45 | Supply, Fixing, Testing and Commisiosning of OFC Outdoor Armored 6 core unitube SM 9/125micron, jelly filled loose tube, Corrugated ECCS Tape armour, Steel Wire Strength Member armor, anti rodent, HDPE outer Stealth withUV compliant (33592-A12-CAB-006 | Make: Plexonics | Model: PL-FSA1006) as directed by the departmental officers and the brand should be got approval. |
| 46 | Supply, Fixing, Testing and Commisiosning of Fiber Laying (Indoor/Outdoor) Charges per mtr (33592-A12-PC-LAB-004) as directed by the departmental officers and the brand should be got approval. |
| 47 | Supply, Fixing, Testing and Commisiosning of Shuttered Flush mount Face plate Single socket (33592-A12-PC-ACC-003 | Make: Plexonics | Model: PL-0601-SFP) as directed by the departmental officers and the brand should be got approval. |
| 48 | Supply, Fixing, Testing and Commisiosning of Back Box for Face plate (33592-A12-PC-ACC-006 | Make: Plexonics | Model: PL-0601-SBB) as directed by the departmental officers and the brand should be got approval. |
| 49 | Supply, Fixing, Testing and Commisiosning of Cat6 key stone I/O, EIA/TIA-568-C Certified (33592-A12-I/O-001 | Make: Plexonics | Model: PL-0601-UKJW) as directed by the departmental officers and the brand should be got approval. |
| 50 | Supply, Fixing, Testing and Commisiosning of CAT 6 UTP stranded copper wire, EIA/TIA-568-C Certified 2M Factory Crimped Patch cord (33592-A12-PC-ACC-008 | Make: Plexonics | Model: PL-064PC-02) as directed by the departmental officers and the brand should be got approval. |
| 51 | Supply, Fixing, Testing and Commisiosning of Fiber Patch Cord LC-LC SM 3Mtr, LC to LC , Duplex, 9/125 micron and 2mm or better thickness (33592-A12-PC-ACC-018 | Make: Plexonics | Model: PL-PCSD-LCP-LCP-03) as directed by the departmental officers and the brand should be got approval. |
| 52 | Supply, Fixing, Testing and Commisiosning of 12 Port Fully Loaded LIU / Fiber Patch Panel (33592-A12-LIU-002 | Make: Plexonics | Model: PL-LUN12) as directed by the departmental officers and the brand should be got approval. |
| 53 | Supply, Fixing, Testing and Commisiosning of 24 Port Fully Loaded LIU / Fiber Patch Panel (33592-A12-LIU-003 | Make: Plexonics | Model: PL-LUN24) as directed by the departmental officers and the brand should be got approval. |
| 54 | Supply, Fixing, Testing and Commisiosning of 1G SM Duplex SFP Module support 10KM Distance (33592-A12-SWIT-ACC-004 | Make: Plexonics | Model: PL-1010SM-GSFP) as directed by the departmental officers and the brand should be got approval. |
| 55 | Supply, Fixing, Testing and Commisiosning of Fiber Termination/Splicing Charges rate for each core (33592-A12-PC-LAB-005 ) as directed by the departmental officers and the brand should be got approval. |
| 56 | Supply, Fixing, Testing and Commisiosning of Cat 6 - 24 Port fully loaded Shuttered Patch Panel with built-in rear cable Manager, EIA/TIA-568-C verified (33592-A12-PP-001 | Make: Plexonics | Model: PL-0624-USPP) as directed by the departmental officers and the brand should be got approval. |
| 57 | Supply, Fixing, Testing and Commisiosning of L2 Managed 24 ports switch (33592-A12-SWIT-004 | Make: Plexonics | Model: PL-2428MG) as directed by the departmental officers and the brand should be got approval. |
| 58 | Supply, Installation, Testing & Commissioning of Pendant luminaire Dash with HE-High Efficiency LED (Light Emitting Diode) system power: 48W (28 W Up, 18 W Dn), luminous flux of luminaire 5040 lm, colour temperature of 5700 K, Cool white, CRI > 80, 230V constant current driver, 70% of luminous flux after 50,000 operating hours, energy-efficient LEDs, direct/indirect light emission, CRCA housing, powder-coated in black, individual anti-glare reflector for each LED, 45 deg beam angle integral electronic control gear.Protection class I, IP20,L = 1195 mm, B = 200 mm, H = 28 mm, PL max = 1500 mm. |
| 59 | Supply, Installation, Testing & Commissioning ofRecessed luminaire shopping with 2 spotlights, system power: 2 x 10 W, luminous flux of luminaire 1800 lm, colour temperature of 5000K, CRI>80, 230V constant current driver, 70% of luminous flux after 50,000 operating hours, direct light emission, sheet metal housing with luminaire part in aluminium, polyester white powder coat applied over a 5-stage pre-treatment, with reflector, beam angle of 38°, electronic control gear,Protection class II, IP20, L = 265 mm, B = 145 mm, H = 155 mm, cutout = 248 mm x 148 mm |
| 60 | Pendant luminaire Ring with HPE (High Performance Efficiency) LED (Light Emitting Diode) system power: 25 W, Luminous flux of luminaire 2250 lm,Colour temperature of 5700 K, cool white, CRI > 80, 230 V constant current driver, 70% of luminous flux after 50,000 operating hours; Energy efficient LEDs, Directlight emission, Luminaire profile in aluminium, Polyester powder black coloured coat applied over a 5- stage pre-treatment, Prismatic diffuser for a homogenous light distribution, ZHLS (ZERO HALOGEN LOWSMOKE) internal wiring, Electronic control gear, Protection class I, IP20, Ø = 600 mm, W = 100 mm, H =67 mm, PL = 1500 mm |
| 61 | Supplying, erecting, connecting and commissioning ofPendant luminaire Groove 2 with with HPE (High Performance Efficiency) LED (Light Emitting Diode), system power: 26 W,luminous flux of luminaire 2730 lm, Colour temperature of 5700 K, cool white, CRI > 80, 230V constant current driver, 70% of luminous flux after 50,000 operating hours; Energy efficient LEDs, Direct light emission, Luminaire housing in aluminium, Polyester powder white coloured coat applied over a 5- stage pre-treatment,Opal diffuser for a homogenous light distributionZHLS (Zero Halogen Low Smoke) internal wiring Electronic control gear, Protection class I, IP 20,Ø = 427 mm, H = 227 mm PL =1500 mm. |
| 62 | Supply, Installation, Testing and Commisioiningof LED strip (flexible), 2835 SMD package with a thermal tape of high thermal convection factor, system power: 12W/metre, luminous flux 960 lm, colour temperature of 5700 K, cool white, CRI >90, 12V DC, constant voltage driving circuit, electronic control gear, Protection Class II, IP20 L = 1000 mm, H = 10 mm, B = 1.4 mm |
| 63 | Supply, Laying, Testing and Commisiosning of 2R 2.5S.mm 1R 1.5S.mm PVC insulated FRLS multistrand copper wire inFully comclead PVC Rigid conduit pipe heavy duty with ISI markwith all accessories as required as per site conditions.of approved brand as directed by the departmental officers (DB TO Switch Box) |
| 64 | Supply, Laying, Testing and Commisiosning of 3R 1.5S.mm PVC insulated FRLS multistrand copper wire inFully comclead PVC Rigid conduit pipe heavy duty with ISI mark ,Modular5A one wayswitch with moulded front plate GI anodised enclosure and other associated accessories as required as per the site conditions. of approved brand as directed by the departmental officers (MAIN LIGHT WIRING (PP)) |
| 65 | Supply, Fixing, Testing and Commisiosning of 3 nos 6A 3/5 pin shurtred Universal Type socket and 3 nos 6A switch with moulded frontplate GIanodised enclosure and other associated accessories in the work station as required as per the site conditions.(for UPS POWER) as directed by the departmental officers and the brand should be got approval. POWER OUTLETS (SOCKETS) |
| 66 | Supply, Fixing, Testing and Commisiosning of 2 nos 6A 3/5 pin shurtred Universal Type socket and 2 no 6A switch with moulded frontplate GIanodised enclosure and other associated accessories in the work station as required as per the site conditions.(for ups POWER) as directed by the departmental officers and the brand should be got approval. |
| 67 | Supply, Fixing, Testing and Commisiosning of 1 no 16/6A switched socket withmoulded frontplate GIanodised enclosure andother associated accessories including chasing embeddingrough plastering as required as per the site conditions. as directed by the departmental officers and the brand should be got approval. |
| 68 | Supply, Installation, Testing and Commisioining ofthree phase, phase segregated, compartmentalised 8 way MCBDBDouble door type, IP 42 powder coated comprising of "C" curve MCB"s for LIGHTING DB. as directed by the departmental officers and the brand should be got approval. Incomer -63A TPNMCB - 1 No Phase Incomer- 63A 30mADP ELCB/RCCB -3Nos Outgoings -6ASP MCB- 24 Nos Blank Plates -0 Including all interconnections and other associated fixing accessories etc as reqd as per the site conditions. |
| 69 | Supply, Installation, Testing and Commisioining ofthree phase, phase segregated, compartmentalised 8 way MCBDBDouble door type, IP 42 powder coated comprising of "C" curve MCB"s for POWER DB. as directed by the departmental officers and the brand should be got approval. Incommer -63A TPNMCB - 1 No Phase Incommer- 63A 100mADP ELCB/RCCB -3Nos Outgoings -16ASP MCB- 24 Nos Blank Plates -0 Including all interconnections and other associated fixing accessories etc as reqd as per the site conditions. |
| 70 | Supply, Installation, Testing and Commisioining ofsingle phase, 12 way MCBDB Double door type, SPN DB IP 42 powder coated comprising of "C" curve MCB"s for EMERGENCY LDB. as directed by the departmental officers and the brand should be got approval. Incommer -25A DPELCB - 1 No Outgoings -6ASP MCB- 10 Nos Blank Plates-0 Including all interconnections and other associated fixing accessories etc as reqd as per the site conditions. |
| 71 | Supply, Laying, Testing and Commisioining of 1100V PVC insulated XLPE and sheathed Armoured/Unarmoured Copper / Aluminium Conductor cables laid overMS supports / Cable racks /fixing of walls including clamping the cable to the support in all approved manner as all complete required. End cable termination lugs shall be as per the respected cable size with respected gland and also double compression gland shall be provide for the 25Sqmm above cable size with double gland earthing to be considered and other accessories to be provided as required as per the site condition. as directed by the departmental officers and the brand should be got approval. (Copper Armoured cable) |
| 72 | 4C 16 sq.mm Ar. Copper Cable YFY |
| 73 | And it terminations |
| 74 | Designing, S I T & C of earth station as per IS 3043, with proper earth lead connection arrangements. Rate shall include all materials excavation, refilling, compacting providing 2" dia/ 450 x 450mm 9" thick brick masonry, GI funnel, salt and char coal, hinged cover thick brick masonry, GI funnel, salt and char coal, hinged cover fabricated out of angle iron frame and 7mm thick chequered plate etc., complete. The GI funnel and tapping connection shall not be greater than 10" from the finished floor level.as directed by the departmental officers and the brand should be got approval. Chemical Earthing Copper Coated: T-39 Cu. (80mm dia) - 3 mtrs with Back Fill Compund (25 kgs per Bag) includes Providing of RCC Chamber and Civil finishing including painting. |
| 75 | Supply & Laying of 25x6mm GI. Flat (EARTH FLAT BUS) |
| 76 | Supply & Laying of 10 SWG bare Cu. Wire (EARTH FLAT BUS) |
| 77 | Supply, Fixing, Erection ofPowder coated MS Junction box of following sizes.The MS junction box shall be earthed with 2.5sqmm copper wire with all hardwares and accessories as required including all clamps and hardwares for fixing the same. The proper supporting to be provided in the centre of the Junction Boxes. The Junction to be covered all other sides, excluding the entry side. The junction thickness is 2mm and top cover 3mm. (UNDER FLOOR JUNCTION BOXES) |
| 78 | 150 x 150 x 50mm |
| 79 | 250 x 250 x 50mm |
| 80 | 350 x 350 x 50mm |
| 81 | 450 x 450 x 50mm |
| 82 | Preparation of Shop drawings as per site conditions based the GFC drawings, the same shall be approved by client / consultant / architects. Obtaining approval from Statutory Authorities, Preparation of statutory drawings, completion Report, Arranging for Inspection, attending defects report and obtaining safety certificate from Safety Authorities for commissioning of the electrical systemand as directed by the departmental officers and the brand should be got approval..(including all required statutory Norms ). Five sets as built drawings with soft copy shall be submitted. |
| 83 | Supplying and fixing in position White / Colour Special Delux Model Glazed Cascade Type Parryware / Hindware / Equivalent Wall Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand Supply ,Installing, testing and commissioning ofEWC WM WITH SEAT COVER "ENZO NEO +"- Modelno: Q167240310 |
| 84 | Supply, Installing, testing and commissioning of Concealed Cistern Sisma with half frame & accessories. - Modelno: Q507450310 |
| 85 | Supply ,Installing, testing and commissioning of flush plate Sisma Rectangolo - Modelno: Q507455320 |
| 86 | Supply, Installing, testing and commissioning of Wash Hand Basin with all accessories such as Cast Iron Brackets, 32mm dia CP Waste Coupling, Rubber Plug and Chain, 32mm dia "B" Class GI Waste Pipe, 15mm dia GM Wheel Valve,15mm dia Nylon Connection, 15mm dia Brass Nipples,15mm CP Pillar Tap etc White without Pedastal Under Counter Basin size: 53x34x17 cm- Modelno: Q197150110 |
| 87 | Supply ,Installing, testing and commissioning of Square Bottle Trap "ACCESSOREIS" - Modelno: Q503191720 |
| 88 | Supply ,Installing, testing and commissioning of Pop up waste full cap - Model no: Q503191520 |
| 89 | Supply ,Installing, testing and commissioning of SS Waste Coupling 32mm Full/half Thread - Model no: F860010CP |
| 90 | Supply ,Installing, testing and commissioning ofAngle Valve -Model no: Q503191120 |
| 91 | Supply ,Installing, testing and commissioning of Pillar Cock "BRYN"-Model no: Q193112120 |
| 92 | Supply, Installing, testing and commissioning of CP Health Faucet with CP Two Way Bib Cock (Health Faucet - Model no: Q503192520) |
| 93 | Supply, installation and fixing of stainless steel toilet paper holder 150 x 150mm with aluminium roller.( Sample should be got approved ) |
| 94 | Supply, Storing and fixing of ABS bodyLiquid soap dispenser with SS screws on the wall.( Sample should be got approved ) |
| 95 | Supply, Storing and fixing of Stainless steel body paper towel dispenser with SS screws on the wall.( Sample should be got approved ) |
| 96 | Supply, installation and fixing of Robe hook with PVC rawl plug & C.P. brass screw complete as required.( Sample should be got approved ) |
| 97 | Supplying, fixing and testing of approved make of 10kg PVC pipes confirming to IS 4985-2000. and fittings (moulded and fabriacted fittings ) such as tee, elbow, "y" , coupler, etc confirming to IS 7834 with latest amendment for soil and waste pipe works in toilets etc. Pipes shall be laid in under floors/ under ceiling / sunken floor as per approved drawings. For laying the pipes in walls, before chasing, the pipe line routing shall be marked using chalk line with help of tube level,Pipes and fittings shall be cleaned with pipe cleaners and joined by approved approved make solvent cement. After laying the pipes, before closing the pipes, gravity test to be conducted and got the approval from the engineers in charge |
| 98 | 40mm dia |
| 99 | 50mm dia |
| 100 | Supply and fixing , Testing and Commissioning of PVC pipes Type-B confirming to IS- 13592 soil,waste & rainwater pipes jointed with solvent cement of good quality lubricant inclusive of all necessary specials like bends, tees, offsets, junctions, pan connector, cowls etc., laid under floor / under ceiling / on walls with suitable clamps including making bores in masonry etc., and rendering the bores in cement mortar after laying the pipes and specials curing etc., complete. The quoted rate should include necessary supports like hanger supports, grip bolts and clamps etc.,. Fixing of universal clamp for hanging pipeline is done at no extra cost and is included in the cost of installation of piping.(Brand & Specifications as per Design ) |
| 101 | 75mm dia |
| 102 | 110mm dia |
| 103 | Providing & fixing in position deep seal multiway PVC floor Trap with cockroach trap and PVC extension piece of required length depth of following size to suit site conditions and multiple inlets, to suit site conditions with inlet sizes ranging from 40 mm to 75 mm. The bottom of the sump shall be dummied water tight. Wherever, sumps are shown to have water seal, the seal depth shall be minimum 40 mm. The sump shall be laid in cement concrete bed with 1:2:5 mix with 40 mm brick jelly bed all around and finished with cement mortar 1:3. Providing and fixing heavy class C.P. brass mosquito proof grating with frame of approved design including setting in floor with cement mortar to match with floor finish. ( Sample should be got approved ) |
| 104 | Supply and fixing of cockroach trap grating , complete as per specifications. (The item rate shall include all costs towards labour, tools, tackles & machineries, all leads & lifts, work related cleaning) complete Square Drain Jali (5x5) "Angular"- Model No:F860058SS or equalant |
| 105 | Supply, installation and testing ofCPVC pipes and fittingsSDR-11 (upto 50mm dia) & SCH 80(above 50mm dia) conforming to ASTM D 2846. CPVC fusion compound shall conform tro ASTM F493. The scope of including, cutting, cleaning and fixing in/on walls under ceiling, on terrace, etc.,. The quoted rate shall include for making necessary chasing, making bores in foundation, walls, slabs, etc., and making good the chased surfaces and bores in cement mortar. Fixing of universal clamp for hanging pipeline is done at no extra cost and is included in the cost of installation of piping.(Internal Concealed,above ceiling piping , Shaft & terrace) (DWS, HWS & RO)as directed by the depatmental officers |
| 106 | 20mm Dia |
| 107 | 25mm Dia |
| 108 | 32mm Dia |
| 109 | Supplying and fixing in position first quality and approved variety of Gun metal gate valve / wheel valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications ( for both internal and external water supply arrangements). the valves to be used on work shall be got approved by the executive engineer before use on work. |
| 110 | 20mm Dia |
| 111 | 25mm Dia |
| 112 | 32mm Dia |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
