Tender For Re-Construction Of Phc At Khawbung
Tender Value
4.05 Crore
Estimated cost
Bid Submission
17 Nov 2023
0 days left
EMD
8.11 Lakhs
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
khawbung → Mizoram
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Re-Construction Of Phc At Khawbung
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 26-Oct-2023 | Corrigendum for Re-Construction of PHC at Khawbung | Date | 17-Nov-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORKS2.06 Earthwork in excavation over areas (exeeding 30cm in depth,1.5m in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.(a) Oridinary and Hard Soil |
| 2 | 2.08 Earthwork in excavation in foundation trenches etc. not exceeding 2 meters depth including dressing of bottom and sides of trenches and compaction in 15 cm in layers as in column, foundations, fence posts, etc. and disposal of all surplus soil as directed.(b) Hard soil ( pick work ). |
| 3 | 2.17 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 4 | 7.01 Regular coursed rubble masonry with hard stone in foundation upto one storey above and below ground level including curing, etc. complete.(b) in cement mortar 1 : 4 (1 cement : 4 fine sand) |
| 5 | 4.03 Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering in - All work upto plinth level :(a) 1:3:6 (1 cement : 3 crouse sand : 6 stone aggregate 20mm nominal size) |
| 6 | 5.28 Providing and laying in position machine batched, machine mixed and machine vibrated design mix M-20 grade reinforced cement concrete excludingcost of centering and shuttering and reinforcement in -(a) All work upto foundation & plinth level. |
| 7 | (b) All work above plinth level upto V level. |
| 8 | 19.20 Extra for providing and mixing water proofing chemical (plastocrete or equivalent chemical) in plain and reinforced cement concrete work 1 : 1.5 : 3 , @ 2% by weight of cement. |
| 9 | 5.21 Steel reinforcement for RCC work including straighthening, cutting, bending, placing in position and binding all complete.(b) Thermo-Mechanically Treated bars of grade Fe-500 or more. |
| 10 | 5.08 Centering and shuttering including strutting, propping, etc.and removal of form works in -(c) Columns. |
| 11 | (d)Beams |
| 12 | (e) Slab, landing, etc. |
| 13 | 5.11 Smooth finishing of exposed surface in R.C.C. work with cement plaster 6mm thick in cement mortar 1:3 (1cement : 3fine sand). |
| 14 | 6.06 Half brick masonry with first class brick in superstructure above plinth level outo floor V level.(a) in cement mortar 1:3 (1 cement : 3 fine sand) |
| 15 | 6.09 7.5 cm thick brick masonry with first class brick in superstructure above plinth level upto floor two level including curing, etc. copmlete.(b)in cement mortar 1:4 (1 cement : 4 coarse sand) |
| 16 | 21.06 12mm cement plaster 1 : 3 (1 cement : 3 fine sand). |
| 17 | 12.19 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1 : 3 (1 cement : 3 coarse sand) and jointing with cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Used 200x300mm size) |
| 18 | 12.12 Providing & laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on bed 20mm thick cement mortar 1 : 4 (1 cement : 4 course sand), including the joints with white cement and matching pigments etc. complete as per design colours. (Used 600x600mm size)(a)Full body polish vitrified (General) |
| 19 | 26.01 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 20 | 9.06 Providing Ist class local wood dressed in frames of chaukat for doors, windows, clerestory windows fixed in position. |
| 21 | 9.11 Providing and fixing 1st class local wood panelled shutters for doors etc. including M.S. butt hinges with necessary screws, etc. complete.(b) 35 mm thick. |
| 22 | 9.32 Providing and fixing readymade door (Masonite or equivalent quality) including M.S. butt hinges with necessary screws complete.(b) 35mm Readymade Teak Veneer Door |
| 23 | 9.29 Providing and fixing hollow core flush door shutters with frame of 1st class local wood and well matched teak ply 3mm thick veneering with vertical grains or cross bands and face veneers on both faces of shutters including M.S. butt hinges with necessary screws.(a) 35mm thick. |
| 24 | 9.56 Providing and fixingwoodenpelmet with 25mm dia wooden curtain rod and bracket including fixing wooden plugs etc. complete ( to be fixed on masonry or concrete work )(B) 1st class local wood(a) 12mm thick 100 cm wide pelmet. |
| 25 | 23/11.01 Providing and fixing anodised aluminium work for doors, windows, ventilators and partitions with extruded built up standard sections/ other sections of approved make conforming to IS : 733 and IS : 1285fixingwith dash fasteners of required dia and size, including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/ neoprene gaskets etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing /panelling, CP brass /stainless steel screws all complete including fixing of glasses but excluding cost of glasses.(a) Natural colour(ii) 3 - track sliding windows/ventilators. |
| 26 | 11.02 Supplying of glass panes at site.(a) 4mm thick plate sheet glass. |
| 27 | 10.18 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. |
| 28 | 14.26 Providing and fixing brass parliamentary hinges bright finished with necessary screws, etc. complete.(a) 150 x 125 x 27 x 5mm |
| 29 | 14.28 Providing and fixing brass sliding door bolts (aldrops) bright finished with nuts and screws etc. complete.(a) 300 x 16 mm |
| 30 | 14.29 Providing and fixing Brass Tower Bolts (Socket Bolts) bright finished with necessary screws etc. complete.(a) 300 mm |
| 31 | 14.32 Providing and fixing brass handles with necessary screws, etc. complete(a) 150 mm |
| 32 | 20.49 Applying priming coat with ready mixed primer of approved brand and manufacture on plaster surface.(a) Ready mix white primer. |
| 33 | 20.73 Wall painting with interior emulsion paint of approved brand and manufacture on new work (two or more coats) to give an even shade.a) Regular interior emulsion like Rangoli delux emulsion etc. |
| 34 | 20.51 Applying priming coat with ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) & Plywood. |
| 35 | 20.72 Painting with synthetic enamel paint of approved brand and manufacture in all shade on new work (two or more coats).a) General quality |
| 36 | 8.02 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. (c) Granite (general black) |
| 37 | 15.23 Providing and fixing aluminium frame works for ceiling lining consisting of battens 50x25mm fixed over plugs embedded in wall with necessary nails or screws, etc. complete. |
| 38 | 15.19 Supplying, fitting and fixing calcium silicate board ceiling with nescessary screws etc. complete excluding frame work of base and beading. (Hilux or equivalent) |
| 39 | 10.08 Steel work in built up tubular (round, square or rectangular hollow tubes etc.)trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 40 | 16.11 Providing Trapezoidal Polyester Coated Galvanised Steel Sheets roofing of any colour of 1.06 m width at all levels including fitting and fixing ridging with self driling, self tapping screws, EPDM washers etc. complete excluding the cost of purlins, rafters and trusses. (i) For0.40 mm thick : |
| 41 | 16.12 Providing and fixing of Pre-Coated Galvanised Steel Sheets of any colour ridges, gutters or valley 50cm overall width, 0.50mm thick with 150 mm overlapping fixed with self driling & tapping screws with EPDM washers but excluding the cost of base frame.(i) For0.40 mm thick : |
| 42 | WATER SUPPLY :2.08 Earthwork in excavation in foundation trenches etc. not exceeding 2 meters depth including dressing of bottom and sides of trenches and subsequent filling and compaction in 15cm layers as in column foundations, fence posts, etc. and disposal of all surplus soil as directed within a lead of 30 metres.(b) Hard Soil( pick work ). |
| 43 | 2/4.03 Providing and laying in position cement concrete of specified grade excludingcost of centering and shuttering - All work upto plinth level:(a) 1:3:6(1 cement :3 course sand :6 stone aggregate 20mm nominal size) |
| 44 | 5.01 Providing and laying in position reinforced cement concreteexcluding cost of centering and shuttering , finishing and reinforcement in - All work upto plinth level :(b)1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate20mm nominal size) |
| 45 | 5.03 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement complete. |
| 46 | 5.18 Steel reinforcement for RCC work including straighthening, cutting, bending, placing in position and binding all complete.(b) Mild steel and medium tensile steel bars. |
| 47 | 5.10 Centering and shuttering including strutting, propping, etc.and removal of form works in -(e)Suspended floors, roofs, landings, shelves and their support, balconies and chajjaj, etc. |
| 48 | 5.11 Smooth finishing of exposed surface in R.C.C. work with cement plaster 6mm thick in cement mortar 1:3 (1cement : 3fine sand). |
| 49 | 6.05 Half brick masonry with first class brickin foundation and plinth in :(a) in cement mortar 1:3 (1 cement : 3 coarse sand) |
| 50 | 6.08 Honey-comb half brick masonry with first class brickin foundation upto one storey above and below ground level including curing, etc. complete.(b) in cement mortar 1:3 (1 cement : 3 coarse sand) |
| 51 | 17.21 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :(a) Single Sink 610x510 mm bowl depth 200mm (Hindware or equivalent) |
| 52 | 17.33 Providing and fixing on wall face SWRPVC soil, waste and vent pipes including jointing with rubber lubricant/cement solvent complete.(a) 110mm dia. |
| 53 | 17.34 Providing and fixing SWRPVC plain bend of required degree (87.50) including jointing with rubber lubricant/cement solvent complete.(a) 110 mm dia. |
| 54 | (b) 75 mm dia. |
| 55 | 17.35 Providing and fixing SWRPVC plain bend of required degree (45) including jointing with rubber lubricant/cement solvent complete.(a) 110 mm dia. |
| 56 | 17.37 Providing and fixing single equal SWRPVC plain junction of required degree ( T-junction ).(a) 110x110x110mm. |
| 57 | 17.41 Providing and fixing SWRPVC socket including jointing with rubber lubricant/cement solvent.(a) 110mm dia socket. |
| 58 | (b) 75mm dia socket. |
| 59 | 17.02 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm uPVC P or S trap, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: (Without Cistern)(a) Orissa pattern pan with integral type foot rests(i) White |
| 60 | 17.44 Providing and fixing 125/110S-trap SWRPVC including jointing with rubber lubricant/ solvent cement. |
| 61 | 17.16 Providing and fixing White vitreous china wash basin Standard of Parryware/ Hindware/ Cera and equivalent make with R.S. or C.I. brackets, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plugs, 32mm C.P. brass waste of standard pattern, 32mm C.P. brass traps and union complete including painting of fittings and brackets, cutting and making good the walls wherever required.(c) Vitreous China corner Wash basin 450 x 390 mm with single 15 mm C.P. brass pillar taps(i) White |
| 62 | 17.17 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.i) white |
| 63 | 18.01 Providing and fixing on terrace (at all floor levels) Polyethylene storage tank of approved brand and manufacture with cover and mosquito proof coupling and suitable locking arrangement and making nescessary connections for inlet, outlet and overflow pipe but without the cost for base support.i) sintex or equivalent |
| 64 | 18.29 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall(b) 20mm dia nominal bore. |
| 65 | 18.36 Making connection of Astral CPVC pipes distribution branch by providing and fixing elbow 90° with jointing, testing complete including cutting and making good etc.(b) 20mm dia |
| 66 | 23/18.38 Making connection of Astral CPVC pipes distribution branch by providing and fixing reducing \"L\" elbow 90° with jointing, testing complete including cutting and making good etc.(a) 20x15mm |
| 67 | 18.44 Making connection of Astral CPVC pipes distribution branch by providing and fixing socket/coupling with jointing, testing complete including cutting and making good etc.(a) 15mm dia. |
| 68 | (b) 20mm dia. |
| 69 | 18.07 Providing and fixing brass bib cock of approved quality.(b) 20mm nominal bore |
| 70 | 18.50 Providing and fixing CPVC ball valve/ Globe/ Stop & Waste valve/ Boiler drain etc. complete.(b) 20mm nominal bore |
| 71 | 17.41 Providing and fixing SWRPVC socket including jointing with rubber lubricant/cement solvent.(b) 75 mm dia socket. |
| 72 | 17.42 Providing and fixing ventilation cowl including jointing with rubber lubricant/cement solvent complete.(b) 75mm SWRPVC vent cowl |
| 73 | 17.43 Providing and fixing W.C. connection bend type (siphon) (SWRPVC) including jointing with rubber lubricant/ solvent cement. |
| 74 | 17.29 Providing anf fixing anodised alluminium towel rail with two anodised alluminium brackets to wooden cleats with C.P brass screws.(b) 600x20mm size. |
| 75 | 17.3 Providing and fixing toilet paper holder.(a) C.P. brass toilet paper holder of standard size. |
| 76 | 17.32 Providing and fixing soap dish fixedwith C.P. brass screws. |
| 77 | 17.25 Providing anf fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos sheet ground fixed to cleats with C.P. brass screws and washers. |
| 78 | INTERNAL ELECTRIFICATION : E:01:00 LIGHTING AND POWER WIRINGS1/C/03:01 Light points, ceiling fan points, exhaust fan point etc. Gr-3(Modular) :Wiring in looping system with PVC wire 1.5 sqmm standard copperwire/conductor as per IS:694(1990) , FIA&TAC approved, ISO-9002 certified company make the insulation PVC of voltage strength 650/110 volts grade stranded copper cable running inside PVC casing &capping 25mm dia (heavy duty) fixed in surface in the wall/ceiling/floor as per convenience including all necessary accessories from control switch to the point as required (with PVC box/sunmica board with cover) as shown:-TO A LIGHT POINTS(B) Short Point(Modular) |
| 79 | (C)Medium point (Modular) |
| 80 | (D) Long point (Modular) |
| 81 | TO CEILING FAN POINT(C)Medium point (Modular) |
| 82 | TO EXHAUST FAN POINT(C)Medium point (Modular) |
| 83 | 2/C:03:02 LIGHT SOCKET/PLUG POINT 5/6 AMPSWiring in looping system with PVC wire sheathed standard copper conductor / wires as per IS:694 (1990) and Flame retardant (FR) 1100 voltage graded copper flexible wire stranded copper running inside PVC casing & capping(Gr-II) 20x12mm fixed, surface on the wall / ceiling /floor as per convenience including junction box having required numbers of ways from DB to the light plug/socket 5/6A point etc. as required :-(C)Medium point (Modular) |
| 84 | (D) Long point (Modular) |
| 85 | 3/C:03:03 POWER SOCKET/ PLUG POINT 15/16AWiring in looping system with PVC wire sheathed standard copper conductor/wires as per IS:694 1990) and Flame retardant (FR) 1100 voltage graded copper flexible wire stranded copper running inside PVC casing & capping (Gr-II) 30x12mm fixed, surface on the wall/ceiling /floor as per convenience including junction box having required numbers of ways from DB to the power plug/socket 15/16A point etc. as required :-(D) Long point (Modular) |
| 86 | C:03:00 (Approved Rate 2016)PVC INSULATED COPPER CONDUCTOR WIRING IN EXISTINGCONDUIT GR-I480 : PVC insulated Multi-core cable 1100Vconforms to IS-694 for indoor application three cores 1.0mm² Havells/Equivalent |
| 87 | 481 : PVC insulated Multi-core cable 1100Vconforms to IS-694 for indoor application three cores 1.5mm² Havells/Equivalent |
| 88 | 482 : PVC insulated Multi-core cable 1100Vconforms to IS-694 for indoor application three cores 2.5mm² Havells/Equivalent |
| 89 | C:03:07 - MAIN TO SUB-MAIN WIRING (three phase four wires)Wiring in looping system with PVC wire sheathed standard copper conductor/wires as per IS:694 (1990) and Flame retardant (FR) 1100 voltage graded copper flexible wire stranded copper running insidePVC Casing & capping (Grade-II) of all available sizes dia\" fixed, surface on the wall/ceiling/floor as per convenience including junction box having required numbers of ways from Main to Sub-Main/DB, Sub main/DB to SDB/Switch boards/SDB to switch boards as required:-(A)4X 2.5 Sqmm copper conductor/cable + 2x 2.5 Sqmm earth wire |
| 90 | (D) 4X 10 Sqmm copper conductor/cable + 2 X 10 Sqmm earth wire |
| 91 | E : 02 : 00 : LIGHTING FIXTURES AND FANSSupplying of all types of CFL/LED Ceiling mounted mirror optics/fibre cover / industrial type surface type with electronic ballast / ballast, condenser / electronic filter etc.in complete as follows:- (a) FTL Deco 1 X 36W DREAMLITE ELECTRONIC/ Mirolta slimcompactenergy efficient luminaire with coloured end caps and electronic ballast suitable Havells /phillips / HIGHER WATTAGE LED 24W Batten Ordering Code: LHEXACP7IN1S024 |
| 92 | (b)CFL Retrofit Dwarf 5W(DU) B22,E14,E27 Base Havells/ ADORELED LAMP 10W B22 CDL Ordering Code: LHLDEUEEML8R010 |
| 93 | 2/J:01:05 Supplying & fixing of batten/angle holder including connection etc. as required |
| 94 | 3/J:01:30 Installation,testing and commissioning of pre-wired fluorescent light fitting of all types with all accessories and tube LED etc. directly on the wall/ceiling including connec- tion with 1.5sqmmPVC insulated copper conductor single core cable etc. in complete |
| 95 | 4 : Supplying of pre-wired ceiling fan as per IS:374 (1979) in a set including standard down rod,canopy,AC ceilingWall fan machines, regulatoretc. incompleted as folows:-(a) Ceiling fan 1200mm sweeps ISI marked 3blades(usha/ crompton/ equivalent) |
| 96 | b) Exaust fan 230mm sweeps ISI marked/Usha/crompton/equivalent |
| 97 | 5/J:01:35 Installation, testing and commis-sioning of ceilling fan and regulator, including wiring the down rod of standard length(upto 30cm) with 2X1.5 Sqmm copper conductor single core etc as required:- |
| 98 | 6/J:01:39 Installation of Exaust fan up to 450mm sweep in the existing opening, including making holes to suit the size of the above Exaust fan,and making good the damage, connection, testing and commissioning etc, as required |
| 99 | 7 : Supplying of Cable lugs(alluminium) of different sizes as mention below :(b) 6 Sqmm |
| 100 | (c) 10 Sqmm |
| 101 | E:03:00MAIN DISTRIBUTION, SWITCH BOARDS ETC.MCB DISTRIBUTION BOARD (DB) O:03:00 Supplying and fixing of different numbers of ways MCB DB double door, SP&N, TP&N in sheet steel phosphatised powder painted MCB DB Bus Bar, Neutral link, earth Bar and Din rail conforms to IS:13032, IS:8623, BS:5486 240/415 volts 50Hz. AC supply on surface including inter-connection, painting etc, in completed as follows:-(01) 6-ways MCB DB SP&N SD Metallic Door |
| 102 | (02) 8-ways MCB DB SP&N SD Metallic Door |
| 103 | 2/N:01:00 MANIATURE CIRCUIT BREAKERSupplying and fixing of all types and rating MCBs, RCCBs, ELCBs etc, 240/415 Volts 50 HzAC supply in the existing MCB DB complete with connections, testing & commissioning etc in completed:-(01) MCB SP B series 5-32 Amps |
| 104 | (04) MCB DP B series 5-32 Amps |
| 105 | (12) 50/63Amps FP MCB B-Series |
| 106 | I:03:00 SWITCH BOARD AND SWITCHESSupplying and fixing of Modular switch board of the following sizes/modules on surface/recess including PVC/Steel boxes,modular plate and necessary switches, plug /socket, and fan regulators etc. with necessary painting if necessaryA. ONE MODULE 1) 1S |
| 107 | B. TWO MODULES13) 2S |
| 108 | C. THREE MODULES31) 3S |
| 109 | 36) 1S + 1 Soc |
| 110 | C. FOUR MODULE51) 2S + 1 Soc |
| 111 | D. SIX MODULE83) 3S + 1Soc + 1Bkp |
| 112 | 1/Q:01:00 (18) Advance Maintenance Free Earth electrode 68mm 3 Meter length 3.6mm wall thicknessGalvanized Bonded Thick wall-flexi core Technology |
| 113 | (45)Providing & Laying of earth connection from earth electrode with 4.00mm dia\" Copper Wire in 15mm dia\" G.I pipe from earth electrode as required. |
| 114 | (46) Providing and fixing of 25mmx5mm copper strip on surface or in recess for connection etc. as required |
| 115 | (55) Supplying and drawing of 1.5sqmm, PVC Sheathed copper conductor for loop earhting in the existing PVC cassing & capping along with other wires in completed |
| 116 | R:01:00 LIGHTNING ARRESTOR (04) Providing & fixing of lightning conductor finial, made of copper five finger system with 85mm diameter 3mm thick base plate including holes etc completed |
| 117 | (59) Providing & fixing of copper tape 20mm X3mm thick on parapet or surface of wall for lightning conductor in complete ( for vertical run) |
| 118 | (60) Providing & fixing of copper tape 20mm X3mm thick on parapet or surface of wall for lightning conductor in complete ( for Horizontal run) |
| 119 | (61)Rivetting, sweating and soldering of copper tape ( with another copper tape base of the finial or any other metallic object ) as required |
| 120 | (65) Proving & fixing of testing joint made of 20mm X3mm thick copper strip 125mm long with 4-nos of tinned brass bolts, nuts and check nut and spring washer etc in complete |
AI Tender Summary
Tender Timeline
Oct 26, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 17, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedNov 17, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 17, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender