Tender For N.H.- 135 Pagar Chitang Kothi (Odr) Widening And Strengthening( Military Compound To Pagar Composite School)
Tender Value
5.75 Crore
Estimated cost
Bid Submission
11 Oct 2023
0 days left
EMD
11.50 Lakhs
Bank guarantee accepted
Document Fee
7714
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
lalganj → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For N.H.- 135 Pagar Chitang Kothi ( Odr ) Widening And Strengthening ( Military Compound To Pagar Composite School )
BOQ
| Sl. No. | Item Description |
| 1 | PART (A)- Road Work |
| 2 | Excavation in Soil using Hydraulic Excavator and Tippers with Disposal upto 1000 metres. :- Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m |
| 3 | Construction of Embankment with Material deposited from Roadway Cutting:- Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2 |
| 4 | Construction of Embankment with Material obtained from road side without lead) :-Construction of embankment with approved materials obtained from borrowpits with all lifts and leads, transporting to site , speading grading to required slope and compating to meet requirement of table 300-2 (without lead) (Data Book Sr. No. 3.16) material obtained from right way. |
| 5 | G.S.B.Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete. (Two layer widening) |
| 6 | Providing, laying spreading and compacting well graded stone aggregates as wet mix macadam specification including premixing the material at OMC in mechanical WMM mixing plant, carriage of mixed material by tipper to site and laying with paver in base course on well prepared surface, compacting with vibratory roller to achieve the desired density. Including cost of material, T&P, labour and all taxes etc. for proper completion of the work. Complete work as per MORT&H specification No. 406.Two Layer |
| 7 | Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70to 1.00 kg/sqm using mechanical means. |
| 8 | Providing and applying tack coat with medium setting bitumen emulsion using Bitumen pressure dristributor @ 0.35 kg. per sqm. on the prepared bituminous surface As per MORT&H Clause 503 |
| 9 | Dense Graded Bituminous MacadamProviding and laying dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per centby weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 507 complete in all respects.(Grade-II) |
| 10 | Providing and applying tack coat with medium setting bitumen emulsion using Bitumen pressure dristributor @ 0.35 kg. per sqm. on the prepared bituminous surface As per MORT&H Clause 503 |
| 11 | Bituminous ConcreteProviding and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonne per hour using crushed aggregates of specified grading premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H specifications Clause 509 complete in all respects. |
| 12 | Construction of subgrade and earthen shoulders with approved material obtained from borrowpits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement to Table 300-2 (without lead) (patri work) |
| 13 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. |
| 14 | Providing and laying in cement concrete 1:4:8(1 cement : 4 coarse sand : 4 graded stone aggregate 40 mm nominal size) and curing complete, including cost of form-work, in foundaiton and floors. |
| 15 | Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 |
| 16 | Supply of 80 mm thick Zig-Zag Rubber moulded M-40 inter locking etc. complete. |
| 17 | M-150 brick work in 1:4 cement and sand of 1.25 fineness modulous mortar in foundation and plinth including supply of all material, labour T&P ect required for proper completion of the work as per SI No 305 |
| 18 | Providing and laying in cement faundation in 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and curing complete, including cost of form-work, |
| 19 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. |
| 20 | Supply and laying of local sand in trenchincluding ramming, dressing, watering etc. including cost of all material, labour etc. complete. (within 8 km.) SI No. 255 |
| 21 | Cement concrete with 4 cm gauge stone ballast coarse sand and cement in the proportion 6:3:1including cost of all material, labour etc. complete. SI No. 281 |
| 22 | RCR stone masonary in 1:3 cement chopan caorse sand mortar in cluding all labour T&P etc complete |
| 23 | Pointing with cement mortar (1:2 ) on brick work in substructure as per Technical Specifications |
| 24 | Providing and laying 350 mm dia N.P-3 H.P. jointing with coller in proper position including cost of cement , jute etc. required for proper completion of work. |
| 25 | Providing and laying 600 mm dia N.P-3 H.P. jointing with coller in proper position including cost of cement , jute etc. required for proper completion of work. |
| 26 | Providing and laying 1000 mm dia N.P-3 H.P. jointing with coller in proper position including cost of cement , jute etc. required for proper completion of work. |
| 27 | Filling of Earth on the side of trenches and on the pataries ad diversion during construction of HP |
| 28 | PART (B)-Road SaftyProvinding & laying of hot applied themoplastic compound 2.5mm thick including reflectorizing glass beads @ 250gms per sqm. Area thickness of 2.5mm is exclusive of surface applied glass bead as per IRC: 35 the finished surface to be level, uniform and free from streaks and holes. as per SOR. traffic signage S.N. 1 SOR PWD LKO. |
| 29 | Supply and Fixing of Cat\"s eye Reflective pavement marker including cost of material, labour etc complete SOR PWD LKO. |
| 30 | Supply of Retro Reflective Delinator post of 70mm dia heavy duty sheet pipe 1.20m long fork at flate iron 40x5mm welded at yellow duly painted with black strong paint, reflective tape in 3.00 layers of size 4\" around the pipe post covered with long size around the post at central store.SOR PWD LKO. |
| 31 | Supply, fixing & erection of built up over head structure 12mt-15 mtr span comprising of three vertical posts of 6.00M height made up of 300mm NB heavy class MS pipe as vertical member welded with 10mm MS plate at top and 12mm MS plate at bottom. The horizontal truss shall comprise of 50mm dia. Heavy class MS pipe and 40mm dia. Heavy MS pipe as bracing &10mm MS. plate at bottom for fixing to vertical post as per structure design & drawing with one of steel primer and 2 coats of synthetic enamel paint. The work includes construction of RCC foundation of size 90x90 cm of required depth as per site condition for built up structure including earth work in excavation, 100mm thick lean concrete in 1:4:8 (cement, coarse sand & 40mm guage, stone ballast), RCC with and1:2:4 (cement, coarse sand & 20mm grit) including supplyand fixing of 20mm dia foundation bolts 600mm long as per provision of structure design including cost of reinforcement and shuttering. The lateral vertical clearances & complete installation work shall be as per relevant clauses of MORT&H specification section 800 & IRC 67 2010 complete in all respect, the rate shall include cost of design, fabrication, supply, transportation, local shifting erection of sigrage structure using crane, inclusive of all taxes, royalty, VAT etc. all T&P machine, material and labour required fur proper completion of work as per direction of engineer in charge. |
| 32 | Supply and fixing of retroreflective high intensity sign board on 2 mm aluminium sheet. As per MORTH specification SOR PWD LKO. |
| 33 | Supply, fixing & erection of built up cantilever structure 6m span comprising of one vertical posts of 6.00 M height made up of 300mm NB heavy class MS pipe as vertical member welded with 10mm MS plate at top and 12mmMS plate at bottom. The horizontal truss shall comprise of 50mm dia. Heavy class MS pipe and 40mm dia. HeavyMS pipe as bracing &10mm MS. plate- at bottom for fixing t8 vertical post as per structure design & drawing with one of steel primer and 2 coafs of synthetic enamel paint. The work includesconstruction of RCC foundation of size 90x90 cm of required depth as per site condition for built up structureIncluding earth work in excavation, 100mm thick lean concrete in 1:4:8 (cement, coarse. sand & 40mm guage stone ballast), RCC with and 1:2:4 (cement, coarse sand & 20mm grit) including supply and fixing of 20mm dia foundation bolts 600mm long as per provision of structure design including cost of reinforcement and shuttering.The lateral vertical clearances & complete installation work shall be as per relevant clauses of MORT&H specification section 800 & IRC 67 2010 complete in all respect, the rate shall include cost of design, fabrication, supply, transportation, local shifting erection of signage. dructure using crane, inclusive of al taxes, royalty, VAT el. all T&P machine, material and labour needed for completion of work as per direction of engineer in charge. |
| 34 | Supply and fixing of retroreflective high intensity sign board on 2 mm aluminium sheet. As per MORTH specification SOR PWD LKO. |
| 35 | Supply and fixing of caution board made of 2 mm thick alluminium sheet area not exceeding 0.90 Sqm supported single angle iron 35x35x5 mm high 3.00 size 900x600mm tectro reflective complete. SOR PWD LKO. |
| 36 | Providing and erecting direction and place identification retro- reflectorized sign as per IRC:67 made of high Intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2mm thick with area exceeding 0.9 igm supported on a mild steel angle iron post\"mm×75mmx6mm, 2 Nos. firmly fixed to the ground by. moans of properly designed foundation with MI5 grade coment concrete 45cmx45cm×60cm, 60cm below ground level as per approved drawing complete (90cm×90cm)Traffic Signs Single Chevron (Normal) |
| 37 | Traffic Signs Stop |
| 38 | Traffic Signs Give Way |
| 39 | Traffic Signs Speed Limit |
| 40 | Hazard Marker |
| 41 | Rumble Stripe |
| 42 | Traffic Signs T-Juction |
| 43 | Traffic Signs - Hospital |
| 44 | Traffic Signs - School |
AI Tender Summary
Tender Timeline
Oct 04, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedOct 11, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 12, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender