Tender For Printing Of Shri Saibaba Deluxe Wall Calendar And Shri Saibaba 3D Desk/Table Calendar Year-2024, shirdi-Maharashtra

Printing Of Shri Saibaba Deluxe Wall Calendar And Shri Saibaba 3D Desk / Table Calendar Year-2024 Printing Of Shri Saibaba Deluxe Wall Calendar And Shri Saibaba 3D Desk / Table Calendar Year-2024 Shri Saibaba Sansthan Trust, Shirdi , Name Of The Calendarshri Saibaba Deluxe Wall Calendar ( 08 Pages ) Edition ( Year ) 2024 Publication Codepub / Calendar Size55.5 Cm X 88 Cm ( 8 Sheets Page ) Total Printing Matter1 Page + 7 Pages Specifications For Calendar07 Sheets On 225 Gsm Texture Coated Card + 01 Sheet On 0.20 Mm Opaque White Pp Sheets Paintings With Concept Based On Life And Message Of Shri Saibaba. As Depicted In Shri Sai Satcharitra. Printingall The 8 Sheets Including White Opaque Pp / 0.20 Mm Sheets To Be Printed By Uv / Offset Process In 6+0 Colour. Finishing ( I ) Uv Coating On All Sheets. ( Ii ) Wiro Binding - 40 Lops Of 5 / 8 Wiro Powder Coated With Gold Colour. ( Iii ) Fiber Rod -1 Mm Thickness, 9Mm Diameter Length 23 Powder Coated With Yellow Colour Best Fitting. ( Iv ) Kalash - Made Of Abs Virgin Material ( Acrylnitride Butadiene Styrene ) Of 18 Mm Diameter & Height 65 Mm ( 2.50 ) And Powder Coated With Gold Colour. ( V ) Plastic Patti - 55Cm Width, 1 Mm Thickness, 1Cm Height To Hold All The Sheets Together At The Bottom Of Calender. ( Vi ) Box - 4 Colour Printed On 296 Gsm White Back Duplex Board Glossy Laminated And 5 Ply Corrugated For Boxes. Packing25 Nos. In 7 Ply Corrugated Box Andprinted Content Label Should Be Pasted On Boxes , Name Of The Calendarshri Saibaba 3D Desk Calendar ( 07 Pages ) Edition ( Year ) 2024 Publication Codepub / Calendar Size25cm X 18 Cm / 3D Stickers Size - 9 Cm X 12.5 Cm Specifications For Calendarsheets 7 Leaves With 3D Stickers On Each Page ( Front And Back ) ( 13 Nos. Of 3D Stickers In All ) Paintings With Concept Based On Life And Message Of Shri Saibaba. As Depicted In Shri Sai Satcharitra. Paper300 Gsmlykem Art Card ( Sapi ) For Leaves / 75 Lpi ( 0.58 Mm Thickness ) For 3D Stickers. Printing4+4 Offset Printing On Leaves / 6+0 Uv Printing For 3D Stickers. Finishing3d Stickers To Be Pasted On Leaves / Gally Stand - 4 Colour Offset Printed And Glossy Laminated Wihgally Made With 2Mm Kappa Board. / Wiro Binding - 28 Loops Of 3 / 8 Wiro, Powder Coated With Black Colour / Box 4 Color Offest Printed On 296 Gsm White Black Duplex Board Glossy Laminated With 3 Ply Corrugation. Packing50 Nos. In 7 Ply Corrugated Box Andprinted Content Label Should Be Pasted On Boxes , Quality And Cost Based Selection ( Qcbs ) And Evaluation Details Of Technical Aspects Please Read Details In Tender Document Page No.13 , The Terms And Conditions For Printing Shree Saibaba Deluxe Wall Calendars And Shree Saibaba Table 3D Desk Calendars Will Be As Follows , Dummy Copy 1 ) Shri Saibaba Deluxe Wall Calendar & Shri Saibaba3d Desk Calendar Bidder Should Submit A Printed Dummy Copy ( Physical Along With The Submission Of Technical Bid To The Sansthan, With The Same Specifications As Mentioned In The Tender Document For Quality Evaluation. Only Those Bidders Will Qualify For Commercial Opening, Who Have Submitted Physical Printed Dummy As Per The Tender Norms. Quality Evaluation Will Be Done On The Basis Of Concept ( A ) Quality Of Design ( B ) Printing Quality ( C ) Turnover ( D ) Press Experience & Over All Look And Creativity. Thereafter The Cumulative Marks Of Quality Evaluation And Financial Marks Will Decide The Selection Of The Bidder. 2 ) Procedure For Finalization Of Tender. A ) Item No. 1 In Terms & Conditions ( 03 ) Of E-Tender – Total 8 Pages Of Deluxe Calendar And Total 7Pages In 3D Desk Calendar ( With 3D Photo ) . The Said Colour Photos In These Pages Is To Beprepared By The Tenderer Himself After Studying The Life Of Shri Saibaba As Mentioned In Shri Saicharitra Book. B ) The Said Colour Pages Are To Be Submitted In The Technical Tender In Dummy Format As Per Thegiven Specifications. C ) The Sample Dummy Received By The Tenderers Of The Said Tender Will Be Scrutinized According Totheir Quality And Will Be Given Marks & The Tenderer Selected Accordingly. Marks Will Be Given Tothe Dummy As Mentioned In The Qcbs System. 3 ) Printing Of Bar Code And Price Tag Should Be Printed At Back Of Cover In The Right Side Of Bottom. 4 ) Bidder Should Not Make Any Changes In Given Matter Without Sansthan Authority Permission. , Dummy / Sample Copy 1 ) Bidder Should Submit 2 Copies Of Provided Printing Matter To Sansthan Authority For Approval Purpose. 2 ) After Approval Of Provided Sample By Sansthan Authority, Bidder Can Proceed Further. 3 ) Sansthan Reserves The Rights To Make Any Changes In Provided Printing Material, If Necessary. , Delivery Period 1. Bidder Will Have To Give The Delivery Of Books Within Stipulated Time But Not Later Than The Validity Period Of The Bid. 2. The Sansthan Authority Reserves The Right To Change Schedule Of Suppling Material As Per The Circumstance, If Necessary.

INR 17000 /-

INR 170000.0 /-

Refer document