Tender For Provision Of Ceiling Fans (Qty-50) For Rds Accommodation, Upgradation Of Lighting System In Small Arms Firing Range, Provn Of Water Cooler At Rds Mess, Dsc Mess, Mrs/Complaint Cell, Provn Of Standby Power Supply From Dg Set To Station Otes
Tender Value
7.65 Lakhs
Estimated cost
Bid Submission
14 Oct 2023
0 days left
EMD
15500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
suryalanka → Andhra Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provision Of Ceiling Fans (Qty-50) For Rds Accommodation, Upgradation Of Lighting System In Small Arms Firing Range, Provn Of Water Cooler At Rds Mess, Dsc Mess, Mrs/Complaint Cell, Provn Of Standby Power Supply From Dg Set To Station Otes Hall And P As Per Tender Documents And Boq
BOQ
| Sl. No. | Item Description |
| 1 | Supply and fix ceiling fans, complete with three blade, suitablelengthdown rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor, Rubber bush for shackle with bolt, nut and lock pin for fixing on Slab/truss by provison of suitable hook/Clamp for hanging of ceiling fan complete all as specified and as directed. |
| 2 | M&L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor, FRLS PVC insulated unsheathed cable 1100 volts grade fixed in and including PVC conduit, fitting and accessories, joints boxes including one 1.5 Sqmm copper FRLS PVC insulated unsheathed earth continuity conductor connected in the common earthfor One light/Bell point controlled by one switch complete all as specified and as directed. |
| 3 | S&F Modular Switch 5/6 Amps, 1module 1 Way complete all as specified and as directed. |
| 4 | S&F Weather proofModular Switch 5/6 Amps, 1module 1 Way complete all as specified and as directed. |
| 5 | S&F3 Module Cover Plate with frame and Metal Flush Box complete all as specified and as directed. |
| 6 | S&F 12 Module Cover Plate with frame and Metal Flush complete all as specified and as directed. |
| 7 | S&F Ceiling rose, 3 plate /PVC/ polycarbonate, isolated body complete all as specified and as directed. |
| 8 | S&F 4 Feet LED Tube light of 20 Watt Batten with integrated electronic driver having THD < 20%, Burning hours not less than 50000 Hrs and aluminium housing with necessary fixing screws, and connected upto ceiling rosewith flexible multicore copper cable and making Good complete all as specified and as directed. |
| 9 | S&F of 5 W LED weather proof lights IP 65, 3000K outdoor Spotlight with spike Stand with Aluminium body , 360 degree movable making Good complete all as specified and as directed. |
| 10 | S&F LED 18W Flashing Aviationlightsof size255mm Height and 168mm Widthand IP 65, Flashing Pttern, Fixing on wall at height of 8 mtrs by Provinding GI 20mm dia, lenght not lessthan 5 mtrs including fixing arrangrments like clamp, bolt, screws etc.. complete all as specified and as directed. |
| 11 | Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections twin core cable flat or circular size of 6 Sq.mm complete all as specified and as directed. |
| 12 | Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections twin core cable flat or circular size of 4 Sq.mm complete all as specified and as directed. |
| 13 | Supply and fixing LED flood light 150 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed. |
| 14 | M&L for preparation of caution board of size 4X3 feet and 1.6mm thick mild sheet duly painted one coat of redoxide and one coat of vitreous syntheitc enamelled paint of blue colour or directed colour with Letters write in trillingual i.e Hindi/English/Telugu as RANGE UNDER PROGRESSof size not lessthan 2 inches complete all as specified and as directed. |
| 15 | Supply, installation, commissioning of Water cooler fully stainless steel, electric driven single phase having approx storage capacity of 80 Ltr and nominal cooling capacity of 40 Ltr per hour including necessary suitable size of PPR Pipe required for inlet connection not more than 10 mts and size of 25mm dia, Brass insert Gate valve of suitable size and PVC connection pipe suitable for connection inlet pipe to Water cooler inlet of size 20mm not less than 60cmcomplete all as specified and as directed. |
| 16 | Cutting PPR/ PVC/ UPVC/ GI pipe of any bore upto 32 mm dia and reducing to required size by inserting Tee and other specials for connection to inlet of Water cooler complete all as specified and as directed. |
| 17 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminum conductor of size 3.5 core 50 sqmm complete all as specified and as directed. |
| 18 | Excavation in trenches, in soft/loose soilnot exceeding 1.5 m deep and not exceeding 1.5 m in wide for laying of cable,RCC Poles/stays and struts etc and getting out including trimming sides and forming bottom surface complete all as specified and as directed. |
| 19 | Returning, filling-in, including spreading, watering and well ramming in layers notexceeding 25 cm thick each, in soft /loose soil complete all as specified and as directed. |
| 20 | M & L for sand cushioning to underground cable including punning down of sand in layer complete all as specified and directed. Note :- Punned down thickness shall be measured for payment |
| 21 | M&L for laying common burnt bricks, sub class \"B\", of size 230 x 115 x 75 mm in trenches for cable protection complete all as specified and as directed. |
| 22 | M&L Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting complete all as specified and directed |
| 23 | Material & Labour for fixing ofchange over 415 V, 4 Pole 100 A including taking down old burn out Change over and making necessary arrangement for fixing the new one like cutting, welding, thimble of suitable size, nuts & bolts etc complete required for fixing the new one complete all as specified and as directed. |
| 24 | Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed. |
| 25 | M&LHardcore of gauge n exc. 63 mm, deposited, spread and leveled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 26 | M&L 100mm thick cement concrete type D-2 1:4:8 (40mm graded stone aggregate) as in sub base complete all as specified and as directed. |
| 27 | M&L for Sand filling under floors/paving\"s, below tiles, including watering and consolidation complete all as specified and as directed. |
| 28 | M&L for 75mm thick plain cement concrete 1:2:4 mix type B-2 (using 20mm graded stone aggregates) as in floors, hard standings, paving\"s etc surface finished evev and fair with out using extra cement complete all as specified and as directed |
| 29 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment complete all as specified and directed. (Make : ULTRA/NITCO/EUROCON/DECO/BHARAT) |
| 30 | M&L for Plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) as in edge restraints/edge blocks/kerbs including use ofnecessary form work, weathering, slightly rounded or chamfered angles and throating and finishing of exposed surfaces including earth work required complete all as specified and directed by Engr-in-Charge |
| 31 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 mcomplete all as specified & as directed |
| 32 | M&L for Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soilcomplete all as specified and as directed. |
| 33 | M&L for Cement concrete 1:3:6 type C-2 (40mm graded stone aggregate)in foundations, filling and mass concrete for post holescomplete all as specified and as directed. |
| 34 | M&L for Cement concrete 1:4:8 type D-2 (40mm graded stone aggregate)in foundations, filling and mass concrete complete all as specified, directed |
| 35 | Supplied and fixed pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws etc complete all as specified, directed and as per manufacturer\"s instructions. |
| 36 | Rolled mild steel sections conforming to Fe-290 (Gde E-165) as in main and cross beams, hip and jack rafters; purloins where connected to common raftersfixed with angle cleats or other connecting plates complete all as spd and as directed. |
| 37 | S&F forrolled mild steel conforming to Fe-290 grade E-165 as in stanchions, posts with flange plates, caps, bases. splices, angle brackets, cleats and other connections complete all as specified and directed. |
| 38 | M&L for preparing new or previously untreated surfaces of steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 39 | S&F for mild steel machine made screw bolts of 5 to 10mm dia (diameter of neck in mm) hexagonal or square heads at one end and screwed the other, screwed end fitted with washers and one hexagonal or square nut exc 5cm but n.exc 10cm long complete all as specified and as directed. |
| 40 | S&F for mild steel machine made screw bolts of 5 to 10mm dia (diameter of neck in mm) hexagonal or square heads at one end and screwed the other, screwed end fitted with washers and one hexagonal or square nut exc 15cm but n.exc 22.50cm long complete all as specified and as directed. |
| 41 | M&L for Cutting holes n exc half brick thicknessin brick walls in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed. |
| 42 | M&L for preparing old surfaces of walls plastered or uplastered including brooming down or wire brushing, scrapping down and applying one of cement base paint complete all as specified and as directed. |
AI Tender Summary
Tender Timeline
Oct 04, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 16, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender