Military Engineer Services-MES has published Tender For Repairs Replacement Of Pvc Flooring, Tilling Works, Aluminium, Wooden Joinery, Railing Ceiling Work, Tiling, Plastering, Plumbing And Sanitary Work In So K Office, Ins Abhimanyu, Nad Dsc Complex, Mes Bldg, Nai, Fodc And Nbcd Hard At Statio. Submission Date for this Tender is 30-10-2023. Civil Work Tenders in karanja Maharashtra. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheeting, any gauge, thickness including nainital or similar pattern roof covering complete all as specified and as directed by Engr-in-charge. |
| 2 | Supply and fix for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-charge. |
| 3 | Supply and fix for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-charge. |
| 4 | Taking down existing bitumen felt roof treatment including cement mortar bedding and cleaning the surface and removal outside the MOD land, complete all as specified and as directed by Engr-in-charge. Notes: (i) Taking down earthing strips including insulators from roof for treatment and re-fixing of same with existing specification in the same position after laid APP membrance including replacement of broken insulators, PVC rawl plus & screws etc., are deemed to be inclusive of rate quoted by the contractor. (ii) Unit rate quoted shall also include for removal of PVC water storage tank wherever existing carefully and refixing at the same or other position after completion of roof repair work. (iii) APP work shall be carried out on Curved/Bent RCC roof at 12 -15m height (non accessible roof). |
| 5 | Demolition in cement concrete of any description and in any position not otherwise specifically provided complete all as specified and as directed by Engr-in-charge. |
| 6 | Material and labour for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting wtih cement and sand slurry 1:3 complete all as specified and as directed by Engr-in-charge. |
| 7 | Material and labour for roughening the old concrete roof surfaces by picking, sweeping, cleaning and washing down with water to remove dust etc and applying a coat of neat cement slurry at the rate of 3 Kg/sqm complete all as specified and as directed by Engr-in-charge. |
| 8 | Material and labour for 40mm thick plain cement concrete in 1:2:4 type B-0 (Using 12.5mm graded stone aggregate) as in padding concrete on roof tops and finishing even and fair complete all as specified and as directed by Engr-in-charge. |
| 9 | Material and labour for rendering 10mm thick on brick work or concrete surfaces in cement mortar 1:4 duly mixing with water proofing compound at the rate of 3% by weight of cement and finished even and smooth complete all as specified and as directed by Engr-in-charge. Note: Water proofing compound will be measured and paid separately under relevent items in this schedule. |
| 10 | Material and labour for water proofing treatment of roof consisting as under:- (a) Applying evenly a coat of bituminous primer conforming to IS-3384:1986 @ 0.30 litre/sqm including preparation of roof surfaces. (b) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg/Sqm on plaster surface all as specified. (c) A layer of 4mm thick APP polymeric membrane of weight not less than 4.80 kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160 gms/sqm), duly sealed at over laps & joints with end laps of the 10cm and side over laps of 7.5cm by flame (by torch application) all as per manufacturer’s instructions. |
| 11 | Supply only water proofing liquid compound complete all as specified and as directed by Engr-in-charge. |
| 12 | Material and labour for applying one coat bitumen water proofing aluminium heat resistance paint @ 0.10 Kg/sqm over one coat of primer on the roof as per manufacture instructions complete all as specified and as directed by Engr-in-charge. |
| 13 | Taking down chowkats or frames exc 1.5 Sqm but not exc 4 Sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed by Engr-in-charge. |
| 14 | All as per item No.13 here-in-before but not exc 1.5 Sqm. |
| 15 | Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm complete all as specified and as directed by Engr-in-charge. |
| 16 | Supply and fix for second class hard wood plain solid, straight, chowkats and frames wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed by Engr-in-charge. |
| 17 | Supply and fix for 30mm thick second class hard wood plain framed panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and as directed by Engr-in-charge. |
| 18 | Supply and fix for 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engr-in-charge. |
| 19 | Supply and fix for solid PVC door frame of size 50x47mm made out of 5mm wood grains printed PVC sheet reinforced with MS square tube and edges painted to match with printed sheets complete all as specified and as directed by Engr-in-charge. |
| 20 | Supply and fix for factory made solid panel PVC door shutter 30mm thick (styled) consisting of frame made out of MS tube for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck in side with solvent cement for styles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the styles and rails with suitable PVC sheet bedding and jointed together with solvent cement supplying and fixing in the frame at site complete all as specified and as directed by Engr-in-charge. |
| 21 | Supply and fix for extruded aluminium alloy handles fabricated type anodized 150mm size complete all as specified and as directed by Engr-in-charge. |
| 22 | Material and labour for mild steel butt hinges medium weight, cold rolled and fixed 100mm long complete all as specified and as directed by Engr-in-charge. |
| 23 | Supply and fix for 200mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and as directed by Engr-in-charge. |
| 24 | Supply and fix for 300mm long aluminium alloy, anodized sliding door bolts with hasp and staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed by Engr-in-charge. |
| 25 | Material and labour for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed by Engr-in-charge. |
| 26 | Material and labour for PCC 1:3:6, type C1 (Using 20mm graded stone aggregate) coping or filling for hold fast/ eves filling, finishing the cement concrete without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 27 | Material and labour for green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and as directed by Engr-in-charge. |
| 28 | Supply and fix for powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e at top, bottom and sides with required EDPM rubber/ neoprene gasket etc., aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ panelling, C.P brass/ stainless steel screws complete all as specified and as directed by Engr-in-charge. |
| 29 | Supply and fix for concealed star lock powder coated for aluminium window fixed as per manufacturers instructions complete all as specified and as directed by Engr-in-charge. |
| 30 | Material and labour for hacking out old broken glass (any thickness, size, quality or description) from wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed by Engr-in-charge. |
| 31 | Material and labour for 12mm thick vertical toughened glass as in door shutters /partition with and including stainless steel SS-304 patch fittings fixed with anchor fastener, cutting to shape, drilling holes as required and all edges of glass shall be diamond polished complete all as specified and as directed by Engr-in-charge. |
| 32 | Material and labour for 4mm thick plain glass sheets ordinary quality in any size, each pane fixed with rubber beading or oil putty for windows/ doors/ partition etc., complete all as specified and as directed by Engr-in-charge. |
| 33 | Supply and fix for rough cast wired glass 6.40mm thickness and glazing with rubber beading or oil putty in area not exc 0.50 sqm in each pane as in windows/ doors/ partition etc., complete all as specified and as directed by Engr-in-charge. |
| 34 | Supply and fix for aluminium anodized grill of design DG-104 pattern made out of 10mm dia rod fixed with and including standard aluminium frame of "F" section of size 23.40mmX15.30mm and1.4mm thick all as per manufactures instructions complete all as specified and as directed by Engr-in-charge. |
| 35 | Material and labour for in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other part made of mild steel heavy duty and fixed complete all as specified and as directed by Engr-in-charge. |
| 36 | Supply and fix in repair for aluminium (extruded section) body hydraulically door closer regulated, designation No.3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and as directed by Engr-in-charge. |
| 37 | Supply and fix for aluminium alloy wire cloth, 0.45mm dia of wire and average width of aperture 1.40mm and fixed with aluminium staples as fixed in repairs complete all as specified and as directed by Engr-in-charge. |
| 38 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.,) or insulation boards /slabs /blankets, any thickness, including cover fillets complete all as specified and as directed by Engr-in-charge. Note: Quoted rate shall be include any height of bldgs for scaffolding as all arrangement. |
| 39 | Supply and fix for PVC false ceiling consisting of 600x600x12mm thick prelaminated self design PVC sheet of density 600 kg/Cum solid PVC panel including frame work made using aluminium "T" section of size (25mmX25mm, 19 gauge or 1mm thick) in square pattern of grid size of 600 x 600 mm. The aluminium frame work is supported from the ceiling with the help of GI wire /6mm dia GI (upto 1200mm length) adjusting and maintain for proper level to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasterners 12.5mm dia 40mm long complete etc., The aluminium frame work is supported on side wall with the use of aluminium 25mm x 25mm angles complete all as specified and as directed by Engr-in-charge. |
| 40 | Supply and fix for false ceiling with armstrong XL 24mm grid system of grid size 600x600x12mm ceiling board of RH-90. Grid shall be suspended from ceiling using 4mm dia pre straighten GI wire with 6mm nylon rawl plug and screws at 1200mm intervals complete all as specified and as directed by Engr-in-charge. |
| 41 | Supply and fix in repair 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame etc., complete all as specified and as directed by Engr-in-charge. |
| 42 | Supply and fix for solid PVC wall lining consisting of 5mm thick plain/ design colour PVC sheet inclusive of solvent and fixing at site on PVC frame complete all as specified and as directed by Engr-in-charge. |
| 43 | Supply and fix in repairs decorative hollow PVC sheet 6-8 mm thick wall panelling (pattern and colour as approved by Engr-in-charge) with self drilling screws with including necessary frame work grid work of aluminium and corner mouldings as required complete all as specified and as directed by Engr-in-charge. |
| 44 | Supply and fix in repairs 4 mm thick non-asbestos fibre cement building boards fixed or laid /inserted to timber /GI / aluminium frame work with screws including anodised aluminium snap grid frame work for false ceiling and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed by Engr-in-charge. Note: Item rate shall be include any height of bldgs for scafolding as all arrangement. |
| 45 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engr-in-charge. |
| 46 | Supply and fix for steel work in tubular trusses including special shaped washer etc., complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 complete all as specified and as directed by Engr-in-charge. |
| 47 | Supply and fix for rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed by Engr-in-charge. |
| 48 | Material and labour for prepration of steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of zinc chrome primer complete all as specified and as directed by Engr-in-charge. |
| 49 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr-in-charge. |
| 50 | Material and labour for non-skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:6) etc complete all as specified and as directed by Engr-in-charge. |
| 51 | Material and labour for non-skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm in skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick rendering as in backing coat of tiles in CM 1:4 etc., complete all as specified and as directed by Engr-in-charge. |
| 52 | Supply and fix for light shade vitrified ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in CM (1:6) as in floor finishes complete all as specified and as directed by Engr-in-charge. |
| 53 | Supply and fix for light shade Vitrified ceramic tiles 10mm thick (square /rectangular) polished, area of each tiles not exc 0.36 sqm, as in skirtings, dados etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick rendering as in backing coat of tiles in CM (1:4) as in floor finishes complete all as specified and as directed by Engr-in-charge. |
| 54 | Material and labour for non-skid coloured ceramic tiles 7 to 8mm thick (square /rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 etc., complete all as specified and as directed by Engr-in-charge. |
| 55 | Material and labour for glazed coloured ceramic tiles in vertical surface350x250x7mm or 450x300x7mm thick as in skirting and dados, set and jointed in neat cement slurry and pointed in coloured cement to match and including 10mm thick backing coat in CM 1:4 etc., complete all as specified and as directed by Engr-in-charge. |
| 56 | Dismantling of stone slabs and tiles of any description or thickness in floor aprons, cills, etc., laid bedded and pointed in any mortar complete all as specified and as directed by Engr-in-charge. |
| 57 | Demolition of cement concrete in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and as directed by Engr-in-charge. |
| 58 | Material and labour for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including 10mm thick screed in CM 1:6 complete all as specified and as directed by Engr-in-charge. |
| 59 | Material and labour for glossy chequered cement concrete tiles 300x300x25mm thick, set jointed and pointed in near cement slurry in floors with white cement and pigments in any colour machine preassed glazed, over cement screed bed 15mm thick cement mortor 1:6 complete all as specified and as directed by Engr-in-charge. |
| 60 | Material and labour for 75mm thick PCC 1:4:8 type D2, (Using 40mm graded stone aggregate) as in sub base of flooring complete all as specified and as directed by Engr-in-charge. |
| 61 | Material and labour for providing and laying 60mm thick factory made chamferred edge cement concrete paver block of M-35 grade with approved colour, design and pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness and size /shape, made by table vibratory method using PU mould, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; ® 13122C complete all as specified and as directed by Engr-in-charge. |
| 62 | Material and labour for PCC 1:2:4 type B-1 (Using 20mm graded stone aggregate) as in kerbing all around tile complete all as specified and as directed by Engr-in-charge. |
| 63 | Supply and fix in repairs PVC tiles /sheets of 2mm thick laminated plain coloured homogenous, laid with approved rubber based adhesive in floors complete all as specified and as directed by Engr-in-charge. |
| 64 | Material and labour for 100mm thick PCC 1:2:4 type B2, (Using 20mm graded stone aggregate) as in flooring /hardstanding and finishing the cement concrete surface even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 65 | Material and labour for 75mm thick PCC 1:3:6, type C-1 (Using 20mm graded stone aggregate) as in plinth protection and finishing the cement concrete surface even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 66 | Taking down cement plaster on brick walls or stone walls etc., includingracking out joints, hacking for key, scrubbing down with water etc., including removing debries directed for a distance max upto 500m complete all as specified and as directed by Engr-in-charge. |
| 67 | Material and labour for rendering 15mm thick on fair faces of brick /concrete surfaces cement plaster in CM 1:4, finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 68 | Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces of walls in cement mortar 1:6 finished even and smooth (without using extra cement) complete all as specified and as directed by Engr-in-charge. |
| 69 | Material and labour for rendering 5mm thick in CM 1:3 on ceiling finished even and smooth finish complete all as specified and as directed by Engr-in-charge. |
| 70 | Material and labour for preparation of new or previously untreated plastered surfaces of walls and applying two coats of acrylic antifungal paint exterior grade paint plain or camouflage pattern on one coat of primer complete all as specified and as directed by Engr-in-charge. |
| 71 | Material and labour for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening on plastered surfaces complete all as specified and as directed by Engr-in-charge. |
| 72 | Material and labour for preparation of new plastered surface of ceiling and applying three coat of white wash on ceiling complete all as specified and as directed by Engr-in-charge. |
| 73 | Supply and fix in repairs vitreous china urinal, half stall type complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60mm brass screws, pointing around urinal back in cement, flush pipes, 32mm dia PVC waste pipe, inlet, outlet, etc., complete all as specified and as directed by Engr-in-charge. |
| 74 | Supply and fix in repairs wash hand basin vitreous china (flat back) size 550x400mm including brackets waste brass chromium plated with long screwed shanks and fly nuts 32mm size including 32mm dia PVC waste pipe complete all as specified and as directed by Engr-in-charge. |
| 75 | Supply and fix in repairs 15mm bore fancy type pillar taps cast copper alloywith capstan heads chromium plated screwed down high pressure withlettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed by Engr-in-charge. |
| 76 | Supply and fix in repairs vitreous china water closet (squatting pan) "Orissa" pattern of size 580x440mm white with integral foot rest and ‘P’ trap (excluding flushing cistern) but including PVC flush pipe and provision of lime concrete bedding complete all as specified and as directed by Engr-in-charge. |
| 77 | Supply and fix for vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) fixed as in repairs complete all as specified and as directed by Engr-in-charge. |
| 78 | Supply and fix in repairs for seat cover for pedestal pan with plastic water closet seat, black or white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engr-in-charge. |
| 79 | Supply and fix in repairs for 10 litres capacity PVC valveless syphonic action type flushing cistern high or low level (exclusive of brackets) white with inlet ball valve, float and handle inlcuidng brackets complete all as specified and as directed by Engr-in-charge. |
| 80 | Supply and fix in repairs fancy type bib taps chromium plated 15mm dia cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-charge. |
| 81 | Supply and fix in repairs fancy type chromium plated stop valves 15mm borecast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and as directed by Engr-in-charge. |
| 82 | Supply and fix for in repair 15mm dia PVC connection of length 450mm long complete all as specified and as directed by Engr-in-charge. |
| 83 | Supply and fix for 20mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls / ceiling or laying in floors, including taking down 20mm dia steel tubing complete all as specified and as directed by Engr-in-charge. |
| 84 | Supply and fix for 25mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls / ceiling or laying in floors, including taking down 25mm dia steel tubing complete all as specified and as directed by Engr-in-charge. |
| 85 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks, etc., removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed by Engr-in-charge. |
| 86 | Supply and fix for plain galvanized mild steel sheeting 1mm thick in ridge hips valley gutters drips and straight flashing welded or soldered joint complete all as specified and as directed by Engr-in-charge. |
| 87 | Supply and fix for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed by Engr-in-charge. |
| 88 | Supply and fix for 150mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including bends complete all as specified and as directed by Engr-in-charge. |
| 89 | Supply and fix for 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed by Engr-in-charge. |
| 90 | Supply and fix for 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed by Engr-in-charge. |
| 91 | Supply and fix for PVC (SWR) bends any radius 110mm bore complete all as specified and as directed by Engr-in-charge. |
| 92 | Supply and fix for PVC (SWR) bends any radius 75mm bore complete all as specified and as directed by Engr-in-charge. |
| 93 | Material and labour for 600x450mm beveled edge looking mirror 5mm thick selected quality glass mounted on 6mm thick AC building board fixed to wall by wooden plug with chromium plated brass screw and cup washer fixed as in repair complete all as specified and as directed by Engr-in-charge. |
| 94 | Demolition of pre-cast concrete block masonry built in cement mortar including all quoins, arches, pillars etc., and precast concrete articles complete all as specified and as directed by Engr-in-charge. |
| 95 | Demolition of brick work or stone boulder masonry built in cement mortar complete all as specified and as directed by Engr-in-charge. |
| 96 | Material and labour for precast cement concrete block masonry with solid blocks exc 10 cm in width in type B1 1:2:4 and setting in mortar 1:6 complete all as specified and as directed by Engr-in-charge. |
| 97 | Material and labour for brick work with sub class "B" bricks using old size bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed by Engr-in-charge. |
| 98 | Supply and fix for stainless steel 304 grade framed work fancy /ornamental type in gates/ stair hosing work and other similar works including all or any type of welding, holdfast, locking arrangement, followed by buffering and polishing for smooth finish complete all as specified and as directed by Engr-in-charge. |
| 99 | Material and labour for preparation of old floor or concrete surfaces of any description and applying two coats of terra cotta exterior grade paint complete all as specified and as directed by Engr-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
