Tender For Supply And Erection Of 2 Tpd Capacity Incinerator At Chennimalai Road Compost Yard, kangeyam-Tamil Nadu

Supply And Erection Of 2 Tpd Capacity Incinerator At Chennimalai Road Compost Yard , Earthwork Open Excavation In All Soils And Sub Soils And To Full Depth As May Be Directed Except In Rock Requiring Blasting But Inclusive Of Shoring, Strutting And Baling Out Water Wherever Necessary And Depositing The Excavated Earth Within The Compound In Places Shown By Departmental Officers With An Initial Lead Of 10M And Lift Of 2M And Clearing And Leveling Etc. Complete Complying With Standard Specification. , Supplying And Filling In Foundation Andbasement With Filling Crushed Stone Sand In Layers Of Not More Than 15Cm.Thick Well Rammed Watered And Compacted -1M3 Etc., Complete Complying With Standard Specification. , Cement Concrete 1:4:8 Mix (One Cement Four Crushed Stone Sand And Eight Aggregate) Using 40 Mm Iss Metal Including Mixing, Laying, Consolidating Curring Cost And Conveyance Of All Materials To Site And All Labour Charges Etc., Complete As Per Standard Speicification , Supplying And Erecting Steel Centering Including Necessary Supports For Plane Surfaces In Foundation And Basement For Reinforced Cement Concrete Works Such As Column Footings, Plinth Beam, Grade Beam, Stair Case Steps, Bed Blocks Etc. Which Require Only Normal Strutting Using M.S. Sheets Of Size 90Cm X60cm Bg 10 Gauge Of Stiffened With Mild Steel Angles Of Size 25Mm X 25Mm X 3Mm For Boarding Laid Over Silver Oak Joists Of Size 10 X 6.50Cm Spaced At About 90 Cm Centre To Centre And Supported By The Casurina Props Of 10Cm To 13Cm Dia Spaced At 75Cm Centreto Centre Atsuitableintervals Etc. Complyingwithstandardspecification. , Providing And Laying In Position, Standardised Concrete Mix M-20 Grade In Accordance With Is :456-2000 Using 20Mm And Down Graded Hard Broken Granite Stone Jelly For All Rcc Items Of Works With Minimum Cement Concrete Of 325 Kg/M3 And Maximum Water Content Ratio Of 0.55, Including Admixture(Plasticiser / Super Plasticiser) In Recommended Proportions As Per Is :9103 To Accelerate. Retard Setting Of Concrete, Improve Workability Without Preparing Strength And Durability With About (5 Cu.M) 7730 Kg Of 20Mm Machine Crushed Stone Jelly And With About (3.30 Cu.M) 5156 Kg Of 10-12Mm Machine Crushed Stone Jelly And With About (4.79 Cu.M) 7670 Kg Of Crushed Stone Sand, But Excluding Cost Of Reinforcement Grill And Fabricating Charges, Centering And Shuttering And Also Laying, Vibrating With Mechanical Vibrators, Finishing Curing Etc., And Providing Fixtures Like Fan Clamps In The Rcc Floor/Roof Slabs Wherever Necessary Without Claming Etc., Complete Complying With Standard Specifications And As Directed By The Departmental Officers. The Coarse And Fine Aggregates To Be Used Should Be Comply With The Requiremnts Of Is Standard.(No Seperate Payment Will Be Made By The Department , A).Below Basement , B).Above Basement , Brick Work In Cement Mortar 1:5 Mix Using (One Cement And Five Crushed Stone Sand) Using Best Quality Of Fly Ash Bricks Of Size (230 X 110 X 75 Cm) For Foundation Including Curing Cost And Conveyance Of All Materials To Site And All Labour Charges Etc., Complete As Eper Standard Specification , Supplying And Filling In Foundation Andbasement With Filling Gravel In Layers Of Not More Than 15Cm.Thick Well Rammed Watered And Compacted -1M3 Etc., Complete Complying With Standard Specification. , Providing And Laying Of 83Mm Thick Interlocking Paver Blockin Uniform Shape Of Approved Make To Be Laid In Flurring Bond Pattern With 150Mm Thick Quarry Rubbish Cushion Below The Uniform Shape Of Approved Non-Skitting Surface In The Top And The Rates Including Levelling The Base, Preparation Of Pavers As Sub Base And Quarry Rubbish Cushion Etc., Complete Complying With Standard Specification. , Supply And Fixing Of Trusses Using Necessary L Angels And I Section Each According To Design Approved By The Departmetal Officers Including Cutting, Welding Cost And Conveyance Of All Materials To Site And All Labor Charges Etc., Complete As Per Standard Specification , Fabricating Supplying And Fixing Of Pre Painted Galvanized Iron Sheets With The Following Specification. The Materials Should Be Of Ppgi Tile Profile With A Red Colour Or Any Other Approved Design 0.47 Mm Thick 24 Guage Having Width 1050 Mm. The Sheet Should Be G.I.Base Pre Painted Hot Dipped Galvanized Iron Sheet And To Be Fixed With Shelf Tapping Screws, Plastic Washer. The Washer And Screws To Be Fixed By Using Minute Power Machine Drilled With Out Damaging The Sheets Paint Coating To Be Regular Modified Polyster Coat With Zinc Coating Of Z 120 Gsm Paint Thickness The Finish Should Be Terra Cotta Finish Like Malabar Mangalore Tiles Finish Optional Matt Finish. The Sheet To Be Fixed With Making Suitable Corrugated, Cutting The Sheet In To The Required Size And Making Ornamental Designs As Per The Site Condition And As Directed By The Departmental Officers. , Plastering With Cement Mortar 1:5 Mix (One Cement And Five Crushed Stone Sand ) To 12 Mm Thick Including Curing Cost And Conveyance Of All Materials To Site And All Labour Charges Etc., Complete As Per Standard Specification , Plastering With Cement Mortar 1:4 Mix (One Cement And Four Crushed Stone Sand ) To 20 Mm Thick Including Curing Cost And Conveyance Of All Materials To Site And All Labour Charges Etc., Complete As Per Standard Specification , Painting Two Coats With Ready Mixed Plastic Emulstion Paint Of First Class Quality Paint And Approved Colour Including Priming Coat Through Scrapping Clean Removal Of Dust Etc., Complete , Painting Two Coats With Best Approved Quality Of Enamel Paint Over One Coat Of Priming For New Iron Work Including All Labour Charges Etc., Complete As Per Standard Specification , Supply Installationtesting And Commissioning 1 Unit Of No Waste Scientific Increator Capacity 2Mt/Day With Height 16Mt From Ground And 1.Primary Combustion Chamber. 2.Secondary Combustion Chamber. 3.Air Pollution Control Unit – Wet Scrubber. 4.Emission Slake5.Supportingtower. 6.Water Pump & Accessories Supply And Deliveryfixing And Commissioning Of Rotary Type Compost Mechanicalshreding Machine And Suitable Conveyor 14M Inclined Length 3 Hpmotor- 3 Phase, Drum -1.5M Dia, Product Capacity 250Kg/ Hours, Including Cost And Conveyance Of All Materials To Site And Labour Charge Etc

Refer document

INR 31000.0 /-

INR 31 Lakhs /-

Name of Work:Supply and Erection of 2 TPD Capacity Incinerator at Chennimalai Road Compost Yard

Sl. No.	Item Description
1	Earthwork open excavation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and depositing the excavated earth within the compound in places shown by departmental officers with an initial lead of 10m and lift of 2m and clearing and leveling etc. complete complying with standard specification.
2	Supplying and filling in foundation andbasement with filling crushed stone sand in layers of not more than 15cm.thick well rammed watered and compacted -1m3 etc., complete complying with standard specification.
3	Cement concrete 1:4:8 mix (One cement four crushed stone sand and eight aggregate) using 40 mm ISS metal including mixing, laying, consolidating curring cost and conveyance of all materials to site and all labour charges etc., complete as per standard speicification
4	Supplying and erecting steel centering including necessary supports for plane surfaces in foundation and basement for reinforced cement concrete works such as column footings, plinth beam, grade beam, stair case steps, bed blocks etc. which require only normal strutting using M.S. sheets of size 90cm x60cm BG 10 gauge of stiffened with mild steel angles of size 25mm x 25mm x 3mm for boarding laid over silver oak joists of size 10 x 6.50cm spaced at about 90 cm centre to centre and supported by the casurina props of 10cm to 13cm dia spaced at 75cm centreto centre atsuitableintervals etc. complyingwithstandardspecification.
5	Providing and laying in Position, Standardised concrete mix M-20 Grade in accordance with IS :456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement concrete of 325 Kg/M3 and maximum water content ratio of 0.55, including admixture(Plasticiser / Super Plasticiser) in recommended Proportions as per IS :9103 to accelerate. retard setting of concrete, improve workability without preparing strength and durability with about (5 cu.m) 7730 Kg of 20mm machine crushed stone jelly and with about (3.30 cu.m) 5156 Kg of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 Kg of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also laying, vibrating with mechanical vibrators, finishing curing etc., and providing fixtures like fan clamps in the RCC floor/roof slabs wherever necessary without claming etc., complete complying with standard specifications and as directed by the departmental officers. The coarse and fine aggregates to be used should be comply with the requiremnts of IS standard.(No seperate payment will be made by the department
6	a).Below Basement
7	b).Above Basement
8	Brick work in cement mortar 1:5 mix using (One cement and five crushed stone sand) using best quality of Fly ash bricks of size (230 x 110 x 75 cm) for foundation including curing cost and conveyance of all materials to site and all labour charges etc., complete as eper standard specification
9	Supplying and filling in foundation andbasement with filling gravel in layers of not more than 15cm.thick well rammed watered and compacted -1m3 etc., complete complying with standard specification.
10	Providing and laying of 83mm thick Interlocking Paver Blockin uniform shape of approved make to be laid in flurring bond pattern with 150mm thick quarry rubbish cushion below the uniform shape of approved non-skitting surface in the top and the rates including levelling the base, preparation of pavers as sub base and quarry rubbish cushion etc., complete complying with standard specification.
11	Supply and fixing of trusses using necessary "L" angels and I section each according to design approved by the departmetal officers including cutting, welding cost and conveyance of all materials to site and all labor charges etc., complete as per standard specification
12	Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws, plastic washer. The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated, cutting the sheet in to the required size and making ornamental designs as per the site condition and as directed by the departmental officers.
13	Plastering with cement mortar 1:5 mix (One cement and five crushed stone sand ) to 12 mm thick including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification
14	Plastering with cement mortar 1:4 mix (One cement and four crushed stone sand ) to 20 mm thick including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification
15	Painting two coats with ready mixed plastic emulstion paint of first class quality paint and approved colour including priming coat through scrapping clean removal of dust etc., complete
16	Painting two coats with best approved quality of enamel paint over one coat of priming for new iron work including all labour charges etc., complete as per standard specification
17	Supply Installationtesting and Commissioning 1 Unit of no waste scientific increator Capacity 2MT/day with height 16mt from ground and 1.Primary Combustion Chamber. 2.Secondary Combustion Chamber. 3.Air Pollution Control unit – Wet Scrubber. 4.Emission Slake5.SupportingTower. 6.Water Pump & Accessories Supply and DeliveryFixing and Commissioning of Rotary type compost MechanicalShreding Machine and suitable conveyor 14m inclined length 3 HPMotor- 3 Phase, Drum -1.5m Dia, Product Capacity 250kg/ Hours, including Cost and Conveyance of all materials to site and labour charge etc