Military Engineer Services-MES has published Tender For Repair Replacement Of Corroded Panel Ug Cable Of Zone A And Water Pipe Line Of Zone B Area Including Tank Cleaning Filter Media Change And Fire Fighting Equipments At Map Area Block No P-32 At Sevoke Mil Stn Under Ge Sevoke Road. Submission Date for this Tender is 01-11-2023. Water Pipe Line Tenders in Kalimpong West Bengal. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 25-Oct-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 01-11-2023 |
Sl. No. | Item Description |
1 | Excavation in trenches n exc 1.5 mtr wide and depth n exc 1.5 mtr deep for foundation, laying GI pipes and UG cables etc n exc 10 sqmtr on plan, in soft/loose soil and getting out complete all as specified and directed. |
2 | Returning filling in with approved excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed. |
3 | Removing excavated soils to a distance not exceeding 50 metres and depositing where directed at a level nexc. 1.5 metre above the starting point complete all as specified and directed. |
4 | Materials and labour for 50 mm outer dia double wall corrugated(DWC) HDPE pipe for enclosing cable below ground/road surface to a required depth including suitable size couplers for jointing of pipe all as per site requirement etc complete all as specified and directed. |
5 | Materials and labour for GI tubing of 40 mm bore light grade with all fitting fixed to wall/ceiling/pole or in trench formed by road/PCC cutting/boring as cable protection laid on floor all as specifed and directed. |
6 | Materials and labour for GI tubing of 50 mm bore light grade with all fitting fixed to wall/ceiling/pole or in trench formed by road/PCC cutting/boring as cable protection laid on floor all as specifed and directed. |
7 | Supply and laying in trenches/wall LT UG XLPE insulated ,armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 25sq mm x 4 coreincluding taking down old unserviceable cable and making necessery connections all as specified and as directed. |
8 | All as item no 07 but of size of cable 16 sqmm 4 core |
9 | All as item no 07 but of size of cable 10 sqmm 4 core |
10 | All as item no 07 but of size of cable 10 sqmm 2 core |
11 | Supply and fixing cable jointing kit for 1.1 KV grade for straight through joint complete with jointing material heat shrink type and accessories suitable for 3.5/4 core XLPE, armoured, aluminium conductor cable of size 16 to 50 Sqmm, Outdoor type, including taking out & relaying damaged UG cable after repair complete all as specified and as directed. (Note:- Excavation and connected items will be measured and paid separately) |
12 | Materials and labour for PCC, type C1, (1:3:6), using 20mm graded crushed stone aggregated) as in coping of poles including formworkincluding demolition of old damaged concrete from pole complete all as specified and as directed |
13 | Materials and labour for boring holes 1mtr deep in soil under roads/PCC as directed for cable passing through pipes of required size and disposal of soil to a distance not exc. 50m. (Note: Connected items like Pipes is measured and paid seperately under relevant items). |
14 | Supply and fixing in repair Indicator lamp (AC/DC), LED type for as per existing fitting.complete all as specified and as directed by Engr-in-Charge. |
15 | Supply and fixing as in repairsMCCB four pole , 415 Volt, 63 Amps,16 KA , fixed thermal &magnetic setting complete all as specified and directed |
16 | Supply and fixing as in repairsMCCB four pole , 415 Volt, 100 Amps,25 KA , fixed thermal &magnetic setting complete all as specified and directed . |
17 | Supply and fixing as in repairsMCCB four pole , 415 Volt, 125 Amps,25 KA , fixed thermal &magnetic setting complete all as specified and directed. |
18 | Supply and fixing MCCB, 160 Amps, four pole, 25 kA, 415 Volts, with adjustable thermal release & adjustable magnetic release complete including taking down old unserviceable MCCB complete all as specified and as directed. . |
19 | Supply and fixing MCCB, 200 Amps, four pole, 25 kA, 415 Volts, with adjustable thermal release & adjustable magnetic release complete including taking down old unserviceable MCCB complete all as specified and as directed. |
20 | Materials and labour for earthing complete with galvanized steel pipe electrode 40mm bore, medium grade, 3.5 meters length, buried directly and preferably vertically in ground with top edge not less than 1.25 meters below ground level connected with earthing lead galvanized iron strip of size 25x5 mm connected to galvanized earth pipe by means of bolts, nuts, checknuts and washer of galvanized iron including PCC (1:2:4) type B1 precast RCC cover slab with suitable handle made of 6mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanized steel tube for watering with one end fix with cast iron funnel and wire-mesh, with protection pipe of 32 mm dia light grade galvanized steel tubing upto 7.5 meters length for drawing earthlead including common salt, charcol , bentonite in alternate layers etc all in around of earthing pipe of 600mm dia, complete all as shown in EP number 2 of SSR Part-1 including testing on completion and including taking down old U/S earthing & testing complete all as specified and as directed. |
21 | Materials and labour for water proof, 3core PVC insulated and PVC sheathed, copper conductor cable of size 1.5 sqmm, 1100 Volts grade for electrical connection of street light fittings, complete all as specified and directed. |
22 | Supply and fixing thermoplastic polycarbonate cable junction box having protection IP 66, dust proof, acid resistant, shock proof, fire retardent self extinguisher for outside installation with knockout entry for cable of size 16 sqmm and 155x155x100 mm with terminals, brackets for street light pole mounting and provision of one 6A MCB SP all as specified and as directed. |
23 | Supply, installing, testing and commissioning outdoor type stainless steel (SS 304) cubical enclosure compartmentalizedexterior and interior mirror type brushed suitable for highly corrosive environment, high creep resistance, better mechanical properties like ductility, yield strength, hardness etc. The enclosure shallbe made of 2 mm thickSS 304 sheet. The fixing of doubledoors shall be on SS hinges with anti-theft provision (the door can’t be removed from enclosure without cutting enclosure). All fabrication/welding shall be done with TIG/MIG or as approved by Engineer in charge suitable for SS 304.Sliding handle and locking arrangement front and rear both side . Enclosure shall be suitable for AC supply system 415 volts, 3 phase, 4 wire, 50 Hz. IP-55 class protection and mounted on channel 75 mm welded with panel of SS 304 with 04 Nos foundation bolt of size not less than20mm dia and 300mm long. The enclosure shall have provision of cable alley . Cable entry from bottom side including internal wiring with PVC insulated solid, copper conductor FRLS cable, IS-694 marked,1100 volts grade of appropriate size (but not less than 2.5 sqmm). Incoming :- (i) Aluminium busbar rating 150 Amps rating 4 Nos. (ii) MCCB 100 Amps 4 pole breaking capacity 25 KA thermal mag protection with Icu = 100% & rated impulse with stand voltage (Vimp) 8 KV with over current & short circuitprotection having double insulation & positive insulation-01 No. Outgoing :-(i) MCCB 40 Amp 4 pole 04 Nos breaking capacity 16 KA thermal mag protection with Icu = 100% & rated impulse withstand voltage (Vimp) 8 KV with over current & short circuitprotection having double insulation & positive insulation, MCB SPN 20Amps - 03 Nos (ii) Current transformer 100/5Amps class-1 15 VA - 2 Nos, Digital Ammeter with inbuilt selector switch -02 No, Digital Voltmeter with in built selector switch -02 No and Modular Indication lamp for main incomer LED type RYB (set of 3)-2 Set (at both incomer MCCB) All MCCB with adjustable protection for over load and short circuit and conforming to IEC60947-II/IS 13947-II (Latest Version). The MCCB should have Ics=100%Icu. The MCCBs shall have spreader links and barriers as standard feature of manufacturer. All out going feeder shall be connected by cable through suitable size gland plate / glands.The various feeders shall be indicated by font size not less than 20 mmletters using Acrylic sheet. The minimums clearance of bus bar shall be 32mm phase –phase and 26mm for phase to earth. The bus bar shall have colour coding with insulating tape. Platform for the panel with PCC 1:4:8 type D-2 with 40 mm graded crushed stone, 15 cm thick in foundation, brick work in CM 1:6 with sub class "B", old size bricks, rendering 15 mm thick in CM 1:6 on exposed surfaces and 100 mm thick PCC padding 1:3:6, type C-1 using 20 mm graded crushed stone aggregate on top and grouting bolts etc for panel.The platform shall be such that it is of a height 45 cm above the nearest road level. |
24 | Taking down old servicable LT UG Cable and refixing same after making necessary repair complete all as specified and as directed by engineer-in-charge (Note: Excavation shall be paid and measured separately under relevant items). |
25 | Taking out old bricks and relaying after cable repair workcomplete all as specified and as directed. |
26 | Materials and labour for taking out cable loop of LT feeder panel and seperating old insulation and fixing cable end jointing kit for the size of the cableupto 120 Sqmm 3.5 core sizecomplete all as specified and as directed by engineer-in-charge. (Note: Excavation shall be paid extra under relevant items. |
27 | Materials and labour for PCC (1:3:6) type C2 using (40mm graded crushed stone aggregate) as in foundation for filling in mass concrete for foundation, road PCC or any other works required on site requirement all as directed. |
28 | Taking up or down from any position existing steel water tubing 20 mm bore of any type and connections carefully including cleaning for refixing or removal to E/M store yard or issued as credit complete all as specified and as directed. Note :Excavation/earth work shall be measured and paid separately under respective item of schedule considered here-in-before. |
29 | All same as item No. 28 above but 25 mm bore. |
30 | All same as item No. 28 above but 40 mm bore. |
31 | All same as item No. 28 above but 50 mm bore. |
32 | All same as item No. 28 above but 80 mm bore. |
33 | Relaying/refixing of old serviceable steel water tubing20 mm bore pipes as obtained from item No. 28 here-in-before, jointing and testingin new or existing position including all new fittings, ISI Marked, such as bends, elbow, tee, reducers, sockets, unions, flange etc as required, laid in trenches or fixed to wall/cellinng or floors including making holes in wall where requiredcomplete all as specified and directed by Engr-in-charge for . |
34 | All same as item No. 33 above but 25 mm bore as obtained from item No. 29 here-in-before. |
35 | All same as item No. 33 above but 40 mm bore as obtained from item No. 30 here-in-before. |
36 | All same as item No. 33 above but 50 mm bore as obtained from item No. 31 here-in-before. |
37 | Supply, laying, jointing & testing 20 mm bore galvanised iron water tubing medium grade with all fittings such as bends, elbow, tee, socket, reducers, unions etc as required at site laid in trenches complete all as specified and directed. |
38 | All same as item No. 37 above but 25 mm bore. |
39 | All same as item No. 37 above but 40 mm bore. |
40 | All same as item No. 37 above but 50 mm bore |
41 | All same as item No. 37 above but 80 mm bore |
42 | Supply and fixingin repair gun metal gate/globe valve, 50 mm bore,ISI Marked, with iron wheel headed screwed both ends for pipeincluding taking down unserviceable complete all as specified and as directed. |
43 | All same as item No. 42 above but 40 mm bore. |
44 | All same as item No. 42 above but 25 mm bore. |
45 | All same as item No. 42 above but 20 mm bore. |
46 | Supply, laying, jointing & testing 3-layer PP-R (Polypropylene random copolymer) concealed pipes, 90 mm outer dia, SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings such as bends, elbow. tee, socket, reducers, unionsfixed complete to walls, ceilings, trenches or in floors etc as required at site complete all as specified and directed. |
47 | All same as item No. 46 above but 63 mm outer dia. |
48 | All same as item No. 46 above but 50 mm outer dia. |
49 | All same as item No. 46 above but 32 mm outer dia. |
50 | All same as item No. 46 above but 25 mm outer dia. |
51 | Supply and fixing in repair PP-R Gate valves (brass insert), for 63 mm outer dia pipe, as per requirement of the site includingtaking down unserviceable valves complete all as specified and as directed of the following sizes:- |
52 | All same as item No. 51 above but for 50 mm outer dia pipe. |
53 | All same as item No. 51 above but for 32 mm outer dia pipe. |
54 | All same as item No. 51 above but for 25 mm outer dia pipe. |
55 | Cutting of existing cast iron/DI pipes 100 mm bore in any position for insertion and fitting of new Tee, Coller, Tail pieces etc for taking out connections, branch connections complete all as specified and directed. Note :- (a)Excavation/earth work shall be measured and paid seperately under respective item of schedule. (b)Fittings shall be measured and paid seperately under respective item of the schedule |
56 | All same as item No. 55 above but for 150 mm bore pipe. |
57 | Taking out cast iron/Ductile iron/PVC/Cemented 100mm bore water mains including all fittings with flanged joints/tyton joints/ spigot and socket endsfor the following sizes :-Note :-Excavation/earth workshall be measured and paid seperately under respective item considered here-in-before |
58 | All same as item No. 57 above but for 150 mm bore |
59 | Supply, laying, jointing and testing of Ductile iron water mains 100mm bore, Class K-7 with spigot and socket ends including rubber gasket joints laid in trenches complete all as specified and directed. |
60 | All same as item No. 59 above but for 150 mm bore |
61 | Supply, fixing and testing DI fittings for spigot & socketed or flanged pipes i.e. bends, reducers, tail pieces, tapers, tees, collars, caps, plugs with MS plate, nuts, bolts, washers gaskets etc of sizes 80mm to 200mm dia including taking out Unserviceable complete all as specified and directed . |
62 | Materials and labour for boring drilling threading and tapping on existing cast iron mains of size 80 mm to 300 mm bore for connecting 15/20 mm bore pipe by fixing of clamp made out of MS flat iron of size 40 x 3 mm made to required shape & size with GI socket duly welded, nut & bolts etc. complete all as specified and directed. |
63 | Repair to existing GI pipe line to prevent the leakage including cutting the pipe line in position and insertion of new fittings like sockets, tees, reducers, bends as required at site or weldingof suitable size all as directed by Engr-in-charge for 20 to 50 mm bore pipeline. Note:- GI fittings shall be measured separately as supply only |
64 | Supply only 50 mm bore GI socket. |
65 | Supply only 25 mm bore GI socket. |
66 | Supply only 20 mm bore GI socket. |
67 | Supply only 50 mm bore GI Union. |
68 | Supply only 40 mm bore GI Union. |
69 | Supply only 25 mm bore GI Union. |
70 | Supply only 20 mm bore GI Union. |
71 | Supply only 50 mm bore GI Nipple. |
72 | Supply only 40 mm bore GI Nipple. |
73 | Supply only 25 mm bore GI Nipple. |
74 | Supply only 20 mm bore GI Nipple. |
75 | Supply only 50x 40mm bore GI Reducer Socket. |
76 | Supply only 50x 25mm bore GI Reducer Socket. |
77 | Supply only 40x25mm bore GI Reducer Socket. |
78 | Supply only 50 mm bore GI plug. |
79 | Supply only 40 mm bore GI plug. |
80 | Supply only 25 mm bore GI plug. |
81 | Supply only 20 mm bore GI plug. |
82 | Supply and fixing in replacement sluice valve 150 mm bore PN 1.6 with Stainless steel spindle nuts, bolts, washers and rubber gasket sheet for packing including taking out existing unserviceable sluice valve fixed at any position all as specified and directed. |
83 | All same as item No. 82 above but 100 mm bore. |
84 | All same as item No. 82 above but 80 mm bore. |
85 | Materials and labour for run lead joint for 150 mm bore CIpipe by using Jute rope & Lead throughly and MS clamp (as per diameter of the pipe completely covering the joint location ) shall be placed prior to putting molten lead, testing after completionincluding dismantling old/defective /wornout joint inclusive complete all as specified and directed. (Note:- Cost of excavation, returning, removal , jute rope, lead & clamps shall deemed to be included in the unit rate quoted). |
86 | Materials and labour for run lead joint for 100 mm bore CIpipe by using Jute rope & Lead throughly and MS clamp (as per diameter of the pipe completely covering the joint location ) shall be placed prior to putting molten lead, testing after completionincluding dismantling old/defective /wornout joint inclusive complete all as specified and directed. (Note:- Cost of excavation, returning, removal , jute rope, lead & clamps shall deemed to be included in the unit rate quoted). |
87 | Supply and fixing mechanical jointof 150 mm bore pipe. |
88 | Supply and fixing mechanical jointof 100 mm bore. |
89 | Materials and labourfor seven stage cleaning and sterlisation of insideof overhead pressed mild steel/RCC tank of capacity 50000 gallons (overhead tank) at 18 to 20 m heightthrough bacteriological treatment by using suitable chemical and Ultra voilet ray inc including arrangement of necessary T&P, labour and Chemicals mechanise etc before starting process of cleaning complete all as specified and as directed. Seven stages are as under follows :- (a) First stage is to drain out the water by using exit valve or by own high capacity dewatering system. (b) Second stage is cleaning all the algae formation inside the tank by using suitable chemical as approved by Engr-in-charge and scrubing the walls of the tanks. (c) Third stage is scrubbing the wall with mechanised scrubber and fresh water cleaning by highspeed jet pump. (d) Fourth stage and first bacteria screening is degermificationby using suitablechemical as approved by Engr-in-Charge . (e) Fifth stage is cleaning the floor of the water tank by industrial vacuum cleaner. (f) Sixth stage is the second bacteria screening and sterilizing method by using ultra voilet ray within the tank and kills all suspended bacteria. (g) Seventh stage of cleaning and third bacteria screening is to sterlize the floor of the water tank by usingstrong oxidizing agent as approved by Engr-in-charg. Make-Rays Clean Tech/ ML Treatment/ M/s Tank Cleaning Pvt Ltd.. Note-(i)Cost of safety equipment such as safety belt and Bambo platform/stagingetc deemed to be included in the quoted rates. |
90 | Dismantling of GI Pipe Connections from the Pressure Filter Plant capacity 6000 to 10000 Gallons, opening the Manhole and removal/taking out old Filter Media completely from Oxidation Chamber, Pre-filter, Iron Removal Filter and depositing the same to a distance not exc. 100 Metre and re-fixing the pipes in the original/existing Position after replacement of unserviceable PVC Nozzle (Dom type) including replacement of Gasket of Manhole Cover and necessary Bolts, Nuts, Washers, etc. as required, complete all as specified and as directed. |
91 | Supply and incorporation of MNO2 of size 1/2""x1"" as filter media of iron removal plant complete all as specified and directed. |
92 | Supply and incorporation of GRAVEL of size 1 1/4""x 1 1/2""(collection source BARAKAR river bank) as filter media of iron removal plant complete all as specified and directed. |
93 | Supply and incorporation of GRAVEL of size 1/2""x 1""(collection source BARAKAR river bank) as filter media of iron removal plant complete all as specified and directed. |
94 | Supply and incorporation of GRAVEL of size 1/4""x1/2""(collection source BARAKAR river bank) as filter media of iron removal plant complete all as specified directed. |
95 | Supply & incorporation of SAND of size 1/6"x1/8"" mesh (collection source BARAKAR river bank) as filter media of iron removal plant complete all as specified and directed. |
96 | Supply & incorporation of Anthracite gritof size 1/8"x1/4""as filter media of iron removal plant complete all as specified & directed. |
97 | Supply and fixing in repair PVC strainers of existing size complete all as specified and directed. |
98 | Materials and labour for painting to old painted external surfaces of Iron Removal Chamber, Pre-filter Chamber, Oxidation Chamber including Pipes complete of Fiteration Plant capacity 8000 GPH with Two Coats of Sythetic Enamel Paint of approved colour including neccessary preparation of surfaces, complete all as specified and as directed. |
99 | Materials and labour for painting to old painted Internal Surfaces of Iron Removal Chamber, Pre- filter Chamber and Oxidation Chamber including Pipes complete of Filteration Plant capacity 8000 GPH with Two Coats of Black Bituminous Paint (Lead Free) suitable for Drinking Water grade including necessary surface preparation by means of scraping, brushing, cleaning, complete all as specified and as directed. |
100 | Testing of water sample of various pump houses of Sevoke Roadfor bacteriological and chemical testing from NABL approved laboratory including submitting the report to the Engineer in Charge,complete all as specified& directed. |
101 | Supply and fixingin repair Pressure guage of capacity 210 kg/cm2. complete all as specified and as directed. |
102 | Supply and fixing3 phase Digital panel volt Meter Flush Mounting 96x96mm, Accuracy Class-I, input voltage measurement range 17-520V AC (P-P), including taking out unserviceablecomplete all as specified and as directed. |
103 | Supply and fixing3 phase 5A, Digital panel ammeter Flush Mounting 96x96mm, Accuracy Class-I, CT/PT Site programmable including taking down existing unserviceable one complete all as specified and as directed. |
104 | Supply and fixing3 phase indicator lamp including taking down existing set complete all as specified and as directed. |
105 | Materials and labour for construction of valve chamber of sizes 1200mm x 1200mm x1200mm (internnal dimensions) with MS sheet cover 3mm thick with angle iron frame of size 50 x 50 x 6mm and locking arrangements including excvation and earth work in any type of soil,PCC (1:4:8) type D2 in foundation ,PCC benching 1:2;4 type B-1 ,PCC (1:4:8) block masonry 20 cm thick in cement mortor (1:6),10 mm thick plastering in CM 1:4 ,PCC bed in (1:3:6) and coping 50mm thick in cement concrete 1:2:4 type B1 using 20mm stone aggregate including necessary formwork, painting one coat of red oxide and two coats of bituminious black paint on all steel surfaces as specified and as directed including demolition of existing valve chamber,complete all as specified and as directed. |
106 | Materials and labour for painting of Valve chamber cover made up of MS sheet of any sizeby surface preparation using emery paper followed by one coat of primer and one coat of black syntheic enemel paint complete all as directed. |
107 | Materials and labour for 15 mm thick rendering in cement mortar (1:4) to fair faces of brick or concerete wall of valve chambers, finished even and smooth without using extra cement complete all as specified and as directed. |
108 | Transporting of defective motor pump set of capacity 10 HP to workshop after dismantling from the installed location incl Disconnecting electrical connections , 440 volt AC Centrifugal electrical motor pump set of followingcapacities, dismantling the motor,taking out burnt winding wire from the stator, cleaning of the casing and the stator with wire brush,rewinding of motorwithsuperior quality copper winding wire of existing size including varnishing an drying, cable jointing and repair replacement of worn at parts of pump reassembling, re-installing at site and testing the samecomplete all as specified:- Note : Spare parts replaced shall be measured & paid seperatelyunder respective item of schedule. Cost of rewiring and winding materials is included in item rate. |
109 | All same as item No.108 above but 3HP. |
110 | All same as item No.108 above but 1HP. |
111 | All same as item No.108 above but 0.5HP. |
112 | Materials and labourfor taking out Centrifugal/ openwell motor pump set of any capacity from site, disconnecting submersible cable,meggering it to check serviceability, re-fixing the same at site after repair including,cable jointing,, reconnecting all pipe and electric connections and testing on full load complete all as specified and as directed. |
113 | Transporting defective Openwell submersible Pump set of Capacity 7.5/10HP capacity to work shop, dismantling the motor,taking out burnt winding wire from the stator, cleaning of the casing and the stator with wire brush,rewinding of motorwithsuperior quality copper winding wire of existing size including varnishing an drying,reassembling the same complete as directed by Engr-in-Charge Note: Spare parts shall be measured and paid sepatarely as supply only |
114 | Servicing of pump set obtained from item no 113 ,dismantling all parts cleaning, brushing all parts, replacement of unserviceable parts if required, greasing oiling of movable parts,re-assembling all serviceable parts complete all as specified and as directed. (Note: Spare part of pump set will be measured and paid separately) |
115 | Supply only bearing of existing size. |
116 | Supply only bearing bush rubber |
117 | Supply only stainless steel shelve at staging. |
118 | Supply only impellers. |
119 | Supply only neck ring. |
120 | Supply only MS stud with nuts of size of 3/8"" x 2 "" for stage casing. |
121 | Supply only bush gun metal at intermediate section. |
122 | Materials and labour for taking out submersible pump set of any capacity from bore well complete with column pipes of any size, submersible cable and steel wire rope,meggering it for serviceability and lowering the same in bore well after carry out necessary repairs/lowering of spare Pump including T & P arrangement complete all as specified and as directed. |
123 | Materials and labour for transportation of defective pump set of capacity of 15 HP to workshop dismantling the same incl Disconnecting electrical connections decoupling 440 volt AC submersible motor pump set of followingcapacities, dismantling the motor,taking out burnt winding wire from the stator, cleaning of the casing and the stator with wire brush,rewinding of motorwithsuperior quality copper winding wire of existing size including varnishing an drying, cable jointing and repair replacement of worn at parts of pump reassembling the same with motor installing the motor and pump , reconnecting all pipe and electric connections and testing on full load complete :- Note : Spare parts replaced shall be measured & paid seperatelyunder respective item of schedule. Cost of rewiring and winding materials is included in item rate. |
124 | All same as item No.123 above but 12.5 HP. |
125 | All same as item No.123 above but 6 HP. |
126 | Servicing of pump set obtained from item no 123 ,dismantling all parts cleaning, brushing all parts, replacement of unserviceable parts if required, greasing oiling of movable parts,re-assembling all serviceable parts complete all as specified and as directed. (Note: Spare part of pump set to be replaced will be measured and paid separately) |
127 | Supply only CI stage casing of submersible pump set of capacity 15 HP.. |
128 | Supply only bearing bush rubber of submersible pump set of capacity 15 HP. |
129 | Supply only stainless steel shelve at staging of submersible pump set of capacity 15 HP. |
130 | Supply only impellers of submersible pump set of capacity 15 HP. |
131 | Supply only neck ring of submersible pump set of capacity 15 HP. |
132 | Supply only key for impellers of submersible pump set of capacity 15 HP. |
133 | Supply only MS stud with nuts of size of 3/8""x 2 "" for stage casing of submersible pump set of capacity 15 HP. |
134 | Supply only Bush gun metal at intermediate section of submersible pump set of capacity 15 HP. |
135 | Supply only Steel sleeve at intermediate section of submersible pump set of capacity 15 HP. |
136 | Supply only MS pipe of 100mm dia including socket Heavy grade of 3 mtr length for column pipe |
137 | Supply only CI stage casing of submersible pump set of capacity 12.5 HP.. |
138 | Supply only bearing bush rubber of submersible pump set of capacity 12.5 HP. |
139 | Supply only stainless steel shelve at staging of submersible pump set of capacity 12.5 HP. |
140 | Supply only impellers of submersible pump set of capacity 12.5 HP. |
141 | Supply only neck ring of submersible pump set of capacity 12.5 HP. |
142 | Supply only key for impellers of submersible pump set of capacity 12.5 HP. |
143 | Supply only MS stud with nuts of existing size for stage casing of submersible pump set of capacity 12.5 HP. |
144 | Supply only Bush gun metal at intermediate section of submersible pump set of capacity 12.5 HP. |
145 | Supply only Steel sleeve at intermediate section of submersible pump set of capacity 12.5 HP. |
146 | Supply only CI stage casing of submersible pump set of capacity 6 HP.. |
147 | Supply only bearing bush rubber of submersible pump set of capacity 6 HP. |
148 | Supply only stainless steel shelve at staging of submersible pump set of capacity 6 HP. |
149 | Supply only impellers of submersible pump set of capacity 6 HP. |
150 | Supply only neck ring of submersible pump set of capacity 6 HP. |
151 | Supply only key for impellers of submersible pump set of capacity 6 HP. |
152 | Supply only MS stud with nuts of existing size for stage casing of submersible pump set of capacity 6 HP. |
153 | Supply only Bush gun metal at intermediate section of submersible pump set of capacity 6 HP. |
154 | Supply only Steel sleeve at intermediate section of submersible pump set of capacity 6 HP. |
155 | Supply only MS pipe of 50mm dia including socket Heavy grade of 3 mtr length for column pipe |
156 | Supply only chemical for drinking water treatment , calcium based granular high strength disinfectant chlorinating chemical having65 %to 70 % chlorine content in granular form in a 45kg drum.Brand/Make shall be from any manufacturer aproved by E-in-C"s branch on date of supply. |
157 | Supply and fixing in repair Fully automatic star delta starter in sheet metal enclosure type with single phase preventor,Earth fault,lock rotor ,over load with selectable tripfor 15HP motor complete all as specified and directed by Engr-in-charge. |
158 | Supply and fixing in repair Fully automatic star delta starter in sheet metal enclosure type with single phase preventor,Earth fault,lock rotor ,over load with selectable tripfor 20HP motor complete all as specified and directed by Engr-in-charge. |
159 | Materials and labour for fully automatic DOL starter for dosing sytem of capacity 0.5HP in sheet metal enclosure type, with in built voltmeter and ammeter and selectable switchcomplete all as specified and directed. |
160 | Supply and fixingSingle Phase Preventor used for automatic Star Delta Starter with on delay timmer (2-3min) and auto manual switch, complete all as specified and as directed. |
161 | Supply and fixingflat submersible cable 3 coremulti stranded copper conductor of size 6 sqmm. complete all as specified and as directed. |
162 | Supply and fixingin repair nozzles of existing size with adjustment of correct direction including taking down unserviceable complete all as specified and as directed. |
163 | Materials and labour for cleaning of fountain well , existing nozzle with wire and wire brush,alignment of nozzles, repair of fountain pipe line by welding,and replacement of nut bolts and washers, and make it run smooothly without blockage/intruption complete all as specified and as directed. |
164 | Cleaning/develpoment of borewell using conventional method by means of air compressor of suitable capacity of atleast 8 hours minimum until sand free mud free clean water obtained from the existing deep tubewell including taking up & down of submersible pump set with column pipe complete all as specified and as directed. 1. Note: Quotated rates shall deemed to be inclusive cost of lifting and lowering of submersible pump alongwith coloum pipes. |
165 | Servicing of air compressor installed at various pump houses including dismantling of motor pump set, varnishing and heating up coils, greasing and oiling of movable parts, replacement of spare parts if required, complete all as specified. Note : Spare parts to be replaced shall be measured & paid seperatelyunder BOQ item nos. 167 to 169. |
166 | Supply only compressor oil. |
167 | Supply only belt. |
168 | Supply only nut bolts. |
169 | Supply and fixing in repair Fire Brigade Inlet connection 2 way without gate valve and inbuilt Check Valve including taking down complete all as specified and as directed. |
170 | Supply and fixingin repair 63 mm bore Heavy Duty Single Headed Fire Hydrant Landing valve including taking down unserviceablve valve complete all as specified and as directed. |
171 | Supply and fixing in repair RRL Hose Pipe Size 63 mm ( 15 Mtr Length ) WithBoth Side SS Coupling Male & Female connection type (Reinforced Rubber Lined ) M.O.C. Canvas including taking down complete all as specified and as directed. |
172 | Supply and fixingin repair Branch Pipe with SS Nozzle including takingdown complete all as specified and as directed. |
173 | Supply and fixingin repair of Hosebox made of 18 gauge MS sheet 800 mm x 600mm x 250 mm with double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet, painted fire red out side and brilliant white inside yard complete including taking out old unservicebale Hose box and removing from site complete all on specified and directed. |
174 | Supply and fixing in repairHose reel Drum ( Wall Mounted) swingingtype, includingHose pipe Length 30 Mtr Long of Size:- 20 mm bore thermo plastic hose with PVC ¾ “ Shutoff Nozzle (Hydraulically Crimped) including taking down and removing from site complete all as specified and as directed. |
175 | Supply and fixingin repair PVC Shut off Nozzle Size 20 mmbore ISI marked including taking down complete all as specified and as directed and removing from site. |
176 | Supply and fixing in repair Hose Clamp including taking down and removing from site complete all as specified and as directed. |
177 | Supply and fixing in repair 100mm Dual Plate Check Valve :- Cast Iron Body , D.I. Doors ,Nitrile /EPDM Seat ,Stainless Steel Shaft and springs P.N. 1.6 including taking down unserviceable and removing from site complete all as specified and as directed. |
178 | Supply & Refilling of Carbon di Oxide Fire Extinguisher 4.5 Kg each complete all as specified and as directed. |
179 | Supply & Refilling of ABC Powder Fire Extinguisher 6 Kg Each complete all as specified and as directed. |
180 | Supply & Refilling of D-Fire Mechanical Foam Extinguisher 9 Ltr capacity each complete all as specified and as directed. |
181 | Supply & Refilling of Watermist baseFire Extinguisher 9 Ltr capacity each complete all as specified and as directed. |
182 | Supply only Fire Extinguisher Hose Pipe ABC Type |
183 | Supply only Fire Extinguisher Hose Pipe CO2 Type |
184 | Supply only valve kit for Fire ExtinguisherABC Type |
185 | Supply only Fire Extinguisher valve for foam type |
186 | Supply only Fire Extinguisher valve forWatertype |
187 | Supply only Pressure Meter |
188 | Supply only Hanging Clip ( Hook ) for Fire Extinguisher |
189 | Supply only Carbon di Oxide Fire Extinguisher 4.5 Kg each |
190 | Supply only ABC Powder Fire Extinguisher 6 Kg Each |
191 | Supply only D-Fire Mechanical Foam Extinguisher 9 Ltr capacity each |
192 | Supply only Watermist baseFire Extinguisher 9 Ltr capacity each |
193 | Labour only for Control Panel Fault Detection & Rectification by changing Necessary defective Components along with necessary copper wire, Lugs, Terminal etc. including testing complete all as specified and as directed. Note: Spare parts will be measured and paid separately under approprite item |
194 | Supply only 3 Pole 32 A Power Contactor |
195 | Supply only Thermal Overload Relay ,Relay Range 14-23 A |
196 | Supply only Setof 3 Phase Indicating Lamps (Red Yellow & Blue ) |
197 | Supply only Push Button Assembly with auxiliary contact BlockStart & Stop |
198 | Supply only 63 Amp TPN MCB10 KA |
199 | Supply only 1 Pole 2 Way Rotary Cum Switch for Auto & Manual selection |
200 | Supply only Single Phase Preventer |
201 | Supply only Danfoss Make KP35 Pressure Switch |
202 | Supply only Ball Valve 15 mm |
203 | PVC Insulated & PVC Shethed Multi core bright Annealed bare Copper Conductor flexible Round Cables Size 1 Sq mm 2 core FRLSH |
204 | Servicing of motor pump set by disassembling :- (i)Motor Front over and back cover part by part dismantling, Internal Coil Heat Varnish, Insulation Testing & refixing. (ii) Pump Part by part Dismantling, Thorough Servicing, replacement ofbearing & Gland Packing /Mechanical seal,re assembly with proper alignment complete all as specified and as directed. |
205 | Materials and labour for painting of motor pump set complete all as specified and as directed |
206 | Supply, laying, jointing & testing MS tubing heavy grade 100mm bore with all fittings such as bends, elbow, tee, socket, reducers, unions etc as required at site laid in trenches or fixing complete with clips, wall hooks etc. complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail