Tender For Periodical Maintenance To Ashoka Park Pallava Park Bvy Ins Vishwakarma Ins Eksila And Bso Under Age Br Iii Of Ge Nd Visakhapatnam
Tender Value
30 Lakhs
Estimated cost
Bid Submission
18 Oct 2023
0 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
visakhapatnam → Andhra Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Periodical Maintenance To Ashoka Park Pallava Park Bvy Ins Vishwakarma Ins Eksila And Bso Under Age Br Iii Of Ge Nd Visakhapatnam
BOQ
| Sl. No. | Item Description |
| 1 | The rates quoted by the tenderer shall deemed to be inclusive for the following provisions in addition to the other conditions specified in the tender documents. No claim whatsoever shall be entertained at a later date on this account:-[i]The repairs shall be done by skilled workmen in the relevant field to the entire satisfaction of Engineer-in-Charge. The contractor shall engage sufficient manpower for the entire period so that progress of work shall not be hampered due to non availability of labour at any time.[ii]The contractor on getting information through Site order / Works diary regarding the nature of repair to be carried out, he shall immediately respond to the same and make all out efforts to carry out the same on priority within 48 hours. In case of any delay in responding / attending the repairs within 48 hours, the GE may at his absolute discretion impose penalty on the contractor at Rs. 100/- per day per each work ordered upto 05(Five) days and Rs. 200/- per day thereafter till completion of the work in case of delay without valid reasons as decided by GE.[iii]Further, the above penalty is applicable even for the multiple locations of work at the same period. It is the responsibility of contractor to make suitable arrangements for attending the repairs simultaneously at all the places.[iv]The decision of the GE as to whether a particular repair has been attended or not on a particular day will be final and binding. The above penalty shall be in addition to the provisions made in clause 50 of IAFW-2249 i.e (Compensation for delay in completion of work). NOTE:- Tenderers/bidders are advised to visit the site and see the buildings themselves and quote their rate accordingly and no claim whatsoever in this regard shall be admissible at any later stage. |
| 2 | Preparing old surfaces ofwallby using vaccume basedhand held or long handle sander machine and applying one coat of oil bound distemper by using Auto roller or Airless sprayer machinecomplete all as specified and directed . |
| 3 | Preparing old surfaces ofwallby using vaccume basedhand held or long handle sander machine and applying Two coats of oil bound distemper by using Auto roller or Airless sprayer machinecomplete all as specified and directed . |
| 4 | Complete removal of existing treatment on wall and prepration of surfaceby using vaccume basedhand held or long handle sander machine and applying 3 mm thick cement based wall putty by using automatic putty sprayer, (the putty shall be mixed with multipurpose mixer only) to achieve even and smooth surfaces and applying two coats of oil bound distemper over a coat of suitable primer by using auto roller or airless sprayer machiner over a coat of primer complete all as specified and directed |
| 5 | Preparing old decorated surfaces of walls by using vaccume basedhand held or long handle sander machine and applying one coat of white washcomplete all as specified and directed . |
| 6 | Preparing old decorated surfaces of ceilings by using vaccume basedhand held or long handle sander machine and applying one coat of white washcomplete all as specified and directed . |
| 7 | Prepration of old decorated surfaces of wallby using vaccume basedhand held or long handle sander machine and cleaning the surfaces by using Jet washerand applying 2 mm thick cement based wall putty by using automatic putty sprayer, (the putty shall be mixed with multipurpose mixer only) to achieve even and smooth surfaces and applying one coat of exterior weather proof (100% acryllic paint) by using auto roller or airless sprayer machiner over a coat of primer complete all as specified and directed |
| 8 | Preparing old decorated platered surfaces of wallsby using vaccume basedhand held or long handle sander machine and cleaning the surfaces by using Jet washer andapplying one coat of cement based paintby using auto roller or airless sprayer machine complete all as specified and directed . |
| 9 | M&L Preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint)by using auto roller or airless sprayer machine complete all as specified and as directed. |
| 10 | M&L Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint by using auto roller or airless sprayer machine complete all as specified and as directed. |
| 11 | Demolition of cement concrete of any description in any position not otherwise specifically provided for complete all as specified and directed |
| 12 | M&L Plain Cement concrete type B-0, 1:2:4 (12.5 mm graded crushed stone aggregate),25mm thick on concrete surface over top ofRCC chajjas, Balcony , staircaselandings , tread and riser with and usingliquidwater proofing compound as per manufactureinstruction finished even & fair with out using extra cement complete all as specified and directed Note: Waterproofing shall be deemed to be included in quoted rates and will not be measured seperately |
| 13 | Taking down cement plaster on brick wall stone wall etc including raking outjoints, hacking for key securing down with water etc complete all as specified and directed |
| 14 | M&L rendering 15 mm thickin cement mortar 1:4 on other than fair face of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 15 | M&L rendering 10 mm thickin cement mortar 1:6 on other than fair faces of brick work , surface finished even and smooth without using extra cement complete all as specified and directed. |
| 16 | M&L rendering 5 mm thickin cement mortar 1:3 on concrete surfaces of ceiling finished even and smooth without using extra cement complete all as specified and directed . |
| 17 | Prepration of new plastered wall surfacesby using vaccume basedhand held or long handle sander machine and cleaning the surfaces by using Jet washerand applying 3 mm thick cement based wall putty by using automatic putty sprayer, (the putty shall be mixed with multipurpose mixer only) to achieve even and smooth surfaces and applying two coats of exterior weather proof (100% acryllic paint) over a coat ofsuitable primer by using auto roller or airless sprayer machiner over a coat of primer complete all as specified and directed |
| 18 | Preparing new platered surfaces of wallsby using vaccume basedhand held or long handle sander machine and cleaning the surfaces by using Jet washer andapplying two coats of cement based paint over a coat of cement based primer by using auto roller or airless sprayer machine complete all as specified and directed . |
| 19 | Prepration of new plastered surfacesby using vaccume basedhand held or long handle sander machine and applying 3 mm thick cement based wall putty by using automatic putty sprayer, (the putty shall be mixed with multipurpose mixer only) to achieve even and smooth surfaces and applying two coats of oil bound distemper over a coat of suitable primer by using auto roller or airless sprayer machiner over a coat of primer complete all as specified and directed |
| 20 | Preparing newly plastered surfaces of walls by using vaccume basedhand held or long handle sander machine and applying Three coats of white washcomplete all as specified and directed . |
| 21 | Preparing newly plastered surfaces of ceilings by using vaccume basedhand held or long handle sander machine and applying Three coats of white washcomplete all as specified and directed . |
| 22 | Supply Only Liquid water proofing Compound of approved quality and makecomplete all as specified and directed . |
AI Tender Summary
Tender Timeline
Oct 04, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedOct 18, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 23, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender