Tender For Providing And Laying Of Ug Cable From The Transformer Which Will Be Erected Newly (Adjacent Place To The Existing Transformer At South Madavilagam) To Vip Guest House Located At Sallithottam Owned By Sri Dharbaranyeswaraswamy Devasthanam,
Tender Value
21.07 Lakhs
Estimated cost
Bid Submission
10 Oct 2023
0 days left
EMD
42153
Bank guarantee accepted
Document Fee
525
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
thirunallar → Puducherry
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing And Laying Of Ug Cable From The Transformer Which Will Be Erected Newly ( Adjacent Place To The Existing Transformer At South Madavilagam ) To Vip Guest House Located At Sallithottam Owned By Sri Dharbaranyeswaraswamy Devasthanam, Thirunallar
BOQ
| Sl. No. | Item Description |
| 1 | Supplying of 4 x 16sqmm armoured aluminium U.G cable - 1.1 KV grade. Make:Polycab (Arrived) |
| 2 | Supplying of 3 1/2 x240sqmm armoured aluminium U.G cable- 1.1 KVgrade.Make:Polycab(Arrived) |
| 3 | Supplying of 3 1/2 x150sqmm armoured aluminium U.G cable- 1.1 KVgrade.Make:Polycab(Arrived) |
| 4 | Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal / coke and salt) as required(5.1) |
| 5 | Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but with charcoal / coke and salt) as required(5.2) |
| 6 | Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. (but without charcoal / coke and salt) as required(5.5) |
| 7 | Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc as required- 80mm dia (14.13.2) |
| 8 | Supplying and fixing PVC green spring hose conduit in wall surface along with the accessories - 2 1/2\" dia. (Arrived) |
| 9 | Supplying and fixing PVC green spring hose conduit in wall surface along with the accessories - 3\" dia. (Arrived) |
| 10 | Laying of one number PVC insulated and PVC sheathed / meter XLPE power cable of 1.1 kV grade of following size direct in ground including excavation , sand cushioning, protective covering and refilling the trench etc. as required – Up to 35 sq.mm(7.1.1) |
| 11 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation , sand cushioning, protective covering and refilling the trench etc. as required - above 95 sq.mm and upto 185 sq.mm(7.1.3) |
| 12 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation , sand cushioning, protective covering and refilling the trench etc.as required - above 185 sq.mm and upto 400 sq.mm(7.1.4) |
| 13 | Supplying of 4-way SS pillar box as per technical specification given below. (Incomer: 400A Fuse Base - 2set. Outgoing: 250A Fuse Base - 2 set) with Hylam sheet and Aluminum bas bar arrangement. Panel shell made out of 14SWG CRCA sheet with one layer of red oxide Two coat of smoke grey on inner side and aluminum paint coating on outer side of the panel. Metering: Voltmeter with selector switch - 1 set, Ammeter withselector switch - 1 set, Lamp with holder setup - 1set. Bus Bar : 400AMPS Aluminium. Bus Bar -50x10 for phase,50x6 for Neutral, 25x6 -Earth. Panel Board Size: 1750mmx750mmx450mm. |
| 14 | Supplying of 6-way SS pillar box as per technical specification given below. (Incomer: 400A Fuse Base - 2set. Outgoing: 250A Fuse Base - 4 set) with Hylam sheet and Aluminium bas bar arrangement. Panel shell made out of 14SWG CRCA sheet with one layer of red oxide Two coat of smoke grey on inner side and aluminium paint coating on outer side of the panel. Metering : Voltmeter with selector switch - 1 set,Ammeter with with selector switch - 1 set, Lamp with holder setup - 1set. Bus Bar : 400AMPS Aluminium. Bus Bar -50x10 for phase,50x6 for Neutral, 25x6-Earth.Panel Board Size: 1750mmx1200mmx450mm. |
| 15 | Labour charges towards for erection of 4-way distribution pillar box. Base Frame: Base leg made out of top 100mmx50mmx6mm channel with primer and paint coating in block shade. Bottom pole channel 1200mm,Top base channel 460mm,RCC base foundation, civil work and bolt nuts with accessories etc., |
| 16 | Labour charges towards for erection of 6-way distribution pillar box. Base Frame: Base leg made out of top 100mmx50mmx6mm channel with primer and paint coating in block shade. Bottom pole channel 1200mm,Top base channel 460mm,RCC base foundation, civil work and bolt nuts with accessories etc., |
| 17 | Supplying of Enclosure box (wall mounted type) with 250Amps 4 Pole SFU along with HRC fuse link. Panel made in 18SWG CRCA sheet with RAL 7032 Siemens grey powder coated. |
| 18 | Supplying of 129HP LT CT Metering panel board with copper bus bar of 30x6x1R for phase and26x6x1R for neutral with suitable hylam sheet. Panel made in 18SWG CRCA sheet with siemens grey powder coated. (AS PER LTM NORMS) |
| 19 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 31/2 X150 sq.mm (50 mm)(9.1.26) |
| 20 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 31/2 X240 sq.mm (62 mm) (9.1.29) |
| 21 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 4 X16 sq.mm (28 mm) (9.1.33) |
| 22 | Supply of 200/5A service CT coil. Make: kaycee. |
AI Tender Summary
Tender Timeline
Oct 04, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedOct 10, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 11, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender