Tender For Upgradation Of L/In Billets T-35 To T-42 At Afs Suryalanka
Tender Value
9.90 Lakhs
Estimated cost
Bid Submission
30 Oct 2023
0 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
suryalanka → Andhra Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Upgradation Of L/In Billets T-35 To T-42 At Afs Suryalanka As Per Tender Documents And Boq
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 23-Oct-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 30-Oct-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames (without taking off shutters from frame) exceeding 1.5 sqm but not exceeding 4 Sqm each including making good disturbed portions with PCC 1:2:4 type B-0 or in cement mortar 1:4 after removal of frames complete all as specified and directed. |
| 2 | S&F of Pressed steel frames 125 x 60mm size for doorswith double rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed. |
| 3 | M&L for Plain cement concrete 1:3:6 type C-0 using 12.5 mm graded stone aggregate for filling of hollow portions of door frames etc., complete all as specified and directed. |
| 4 | S&F of 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 5 | S&Ffor 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze etc. divided in to squares, with plain chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamferred or rounded, fitted with cut and mitered beads for securing glass, wire gauge etc. ; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) fitted to chowkats complete all as specified and directed. |
| 6 | Taking down chowkats or frames (without taking off shutters from frame ) not exceeding 1.5 sqm each all as specified and directed.(including cutting holes for removing / inserting hold fasts and making good disturbed portionswith PCC 1:2:4 type B-0 or in CM 1:4 after re fixing of frames) complete all as specified and directed. |
| 7 | M&L for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc., complete all as specified and directed. |
| 8 | S&F of powder coated aluminium window andventilator glazed shutters, side hung type without sash bars aluminium sections weighing 0.55 kg/s (standard aluminium section of DG-2496of sizes 39.4 x 17.7 mm and1.2 mm thick (min) including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21, 100mm long (2Nos), suitable handle (1Nos) for each shuttercomplete all as specified and directed by Engr-in-charge. |
| 9 | S & F4 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 10 | S & F of Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mmand fixed with stainless steel wire staples or wooden/aluminium beeds complete all as specified and directed. |
| 11 | S&F of 4 mm thickSheet Glass, ordinary quality and glazing with aluminium beads complete all as specified and directed. |
| 12 | S&F factory made PVC Solid Door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS Square tube, fixed in opening complete all as specified and directed. |
| 13 | S&F Factory made Solid panel PVC Door Shutter of 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain clour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement as per specification and drawing complete all as specified and directed. |
| 14 | S&F 125 mm size Aluminium butt hingesextruded aluminium alloy with galvanised steel wire pin anodised, type B-21 complete all as specified and directed. |
| 15 | S&F 200 mm long Aluminium anodised barrel tower bolts of extruded aluminium section fixed in repairs complete all as specified and directed. |
| 16 | S&F 150 mm long Aluminium alloy handles cast type anodised complete all as specified and directed. |
| 17 | S&F of 100 mm long Aluminium anodised barrel tower bolts of extruded aluminium section complete all as specified and directed. |
| 18 | S&F of 100 mm long Aluminium alloy handles cast type anodised complete all as specified and directed. |
| 19 | S&F 75 mm long Aluminium butt hingesextruded aluminium alloy with galvanised steel wire pin anodised, type C-22 complete all as specified and directed. |
| 20 | S&F of 300 mmlong aluminium alloy anodised sliding door bolts with hasp and staple (bolt type)and fixing clip of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 21 | S&F in repairs of brass 300 mm ,ordinary rat & tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 22 | Dismantling floor, hearth or wall tiling including cement morar bedding, removing serviceable tiles to store and rubbish off the permises complete all as spd and as directed. |
| 23 | M&L for Non Skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc, set and jointed in neat cement slurry laid over and including 15mm thick screed in cement mortar 1:6 and pointed in white or coloured cement to match complete all as spd and as directed. |
| 24 | M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15 mm thick screed in cement mortar mortar 1:6 complete all as specified and directed. |
| 25 | M&L for 100 mm high skirting with joint free non Skid ceramic coloured tiles (matt finish)7 to 8 mm thickhigh area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile, laid over and including 10 mm thick backing coat in cement mortar mortar 1:4complete all as specified and directed. |
| 26 | M&L for Glazed ceramic colouredtiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchlaid over and including 10mm thick screed in cement mortar in cement mortar 1:4complete all as specified and directed. |
| 27 | Taking down cementor cement lime plaster, any description, on brick walls including racking out joints hacking for keyscrubbing down with water etc. complete all as specified and directed. |
| 28 | M&L for rendering 10mm thick on fair faces of brick or concrete in CM 1:6 finishing even and smooth with out using extra cement complete all as specified and directed. |
| 29 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in two layers, first layer 10 mm thick in CM 1:6 and second layer 5 mm thick in CM 1:4 finishing fair and evenmixed with WPC as per manufacturer\"s instructions complete all as specified and directed. (Note : Supply of water proofing compound shall be measured and paid separately). |
| 30 | M&L for rendering 5mm thick on fair faces ofconcrete surfaces in cement mortar 1:3in ceiling surface finished even and smooth with out using extra cement complete all as specified and directed. |
| 31 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 32 | M&L for preparation of newly plastered surfaces of walls and applying two coats of exterior emulsion paint a coat of primer complete all as specified and directed. |
| 33 | M&L for preparation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed. |
| 34 | M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed. |
| 35 | Demolition of Brick work built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed. |
| 36 | M&L for Brickwork with sub-class `B\" old sizebricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
AI Tender Summary
Tender Timeline
Oct 23, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 30, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedOct 30, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 01, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender