Installation Of Tube Well With Reservoir And Electric Pump Near Dakkhin Hijalatala Kabarsthan At Ward No 14 Under Dhuliyan Municipality.
Tender Value
1.59 Lakhs
Estimated cost
Bid Submission
10 Oct 2023
0 days left
EMD
3192
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dhuliyan → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Installation Of Tube Well With Reservoir And Electric Pump Near Dakkhin Hijalatala Kabarsthan At Ward No 14 Under Dhuliyan Municipality.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches ordrains, in all sorts of soil (including mixed soil butexcluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75m. as directed. The item includes necessary trimmingthe sides of trenches, levelling, dressing andramming the bottom, bailing out water as requiredcomplete.(a) Depth of excavation not exceeding 1,500 mm.page no 1 item no 2(a) |
| 2 | Single Brick Flat Soling of picked jhama bricks including ramming anddressing bed to proper level and filling joints with local sand. |
| 3 | Cement concrete with graded stoneballast(40mm size excludingshuttering)In ground floor(A) [Pakur Variety](a) 1:3:6 proportion( ( Page -34, item - 22 (a) |
| 4 | Ordinary Cement concrete (mix 1:1.5:3) with graded stonechips (20 mm nominal size) excluding shuttering andreinforcement if any, in ground floor as per relevant IS codes.(i) Pakur Variety page no 26 item no 10 (i) |
| 5 | Hire and labour charges for shuttering with centering andnecessary staging upto 4 m using approved stout props andthick hard wood planks of approved thickness with requiredbracing for concrete slabs, beams and columns, lintels curvedor straight including fitting, fixing and striking out aftercompletion of works (upto roof of ground floor)(When the height of a particular floor is more than 4 m theequivalent floor height shall be taken as 4 m and extra forworks beyond the initial 4 m ht. shall be allowed under 12 (e)for every 4 m or part thereof)(f) 25 mm to 30 mm shuttering without staging in foundation page no 27 item no 12 (f) |
| 6 | Reinforcement for reinforced concrete work in all sorts ofstructures including distribution bars, stirrups, binders etcinitial straightening and removal of loose rust (if necessary),cutting to requisite length, hooking and bending to correctshape, placing in proper position and binding with 16 gaugeblack annealed wire at every intersection, complete as perdrawing and direction. (a) For works in foundation, basement and upto roof of groundfloor/upto 4 mII. Other than SAIL/TATA/RINL Page no 43 item no 40 (i) II |
| 7 | 125 mm. thick brick work with 1st class bricks in cementmortar (1:4) in ground floor. Page no 16 |
| 8 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/stagingwhere necessary .[Excluding cost of chipping over concrete surface]A) In Ground floor(i) With 1:6 cement mortar(c) 15 mm thick plaster [ Page - 189 item - 2 - i (c ) |
| 9 | Supplying, fitting & fixing 1st quality Ceramic tiles in wallsand floors to match with the existing work & 4 nos. of keystones (10mm) fixed with araldite at the back of each tile &finishing the joints with white cement mixed with colouringoxide if required to match the colour of tiles includingroughening of concrete surface, if necessary or by syntheticadhesive & grout materials etc.With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thickcement slurry at back side of tiles using cement @ 2.91Kg/Sq.m & joint filling using white cement slurry @0.20kg/Sq.m page no 64 item no 35 |
| 10 | Supplying P.V.C. water storage tank of approved quality with closed topwith lid (Black) - Multilayer(d) 2000 litre capacity page no 37 item no 6 (f) |
| 11 | Labour for hoisting plastic water storage tank(ii) Above 1500 litre upto 5000 litre capacity.(a) Upto 1st story from G.L. Page no 37 item no 10(ii)(a) |
| 12 | Supplying, fitting and fixing bib cock or stop cock.(e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent)15 mm page no 06 item no 7 (e) |
| 13 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80(medium duty) conforming to ASTMD - 1785 and threaded to match withGI Pipes as per IS : 1239 (Part - I). with all necessary accessories,specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew,reducing socket, reducing tee, short piece etc. fitted with holder batsclamps, including cutting pipes, making threads,fitting, fixing etc.complete in all respect including cost of all necessary fittings asrequired,jointing materials and two coats of painting with approved paintin any position above ground. (Payment will be made on the centre linemeasurements of total pipe line including all specials. No separatepayment will be made for accesories, specials. Payment for painting willbe made seperately)(a) For Exposed WorkPVC Pipes PAGE NO 12 ITEM NO (19I)15mm dia |
| 14 | 25 mm dia |
| 15 | 32 mm dia |
| 16 | 40 mm dia |
| 17 | Labour for boring tube well of required dia. by water jet system throughany type of soil strata including hire and labour charges for boring pipes,scaffolding, tools and plants as necessary and taking out them andlowering pipes, strainers, blind pipe etc. and fitting and fixing the samecomplete including bucket washing and other incidental works in theconnection. The tube well should have a minimum 50 mm gap in betweenthe outside of the tubewell pipe and the bore(a) For depth upto 150 metre. page 49 item 1(i) 40 mm dia. boring etc. |
| 18 | (iii) 80 mm dia. boring etc. |
| 19 | Supplying high density polythene strainer of approved make with adapterconforming to I.S. specifications(i) 40 mm dia page no 52 item no 5. |
| 20 | Supplying, fitting and fixing steel cutter piece upto 450 mm long withsockets(i) 40 mm dia. Page 53 item no 9 |
| 21 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conformingto ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239(Part - I). Page no 13 item no 19(iii)(B) 40 mm dia |
| 22 | © 80 mm dia |
| 23 | Supply of G.I pipe of TATA medium including necessary sockets make 40 mm dia |
| 24 | Supply fitting fixing Submersible pupm with starter all completeMake : -Crompton / C.R.I /Kirloskar |
| 25 | GST 18.00% |
| 26 | Cess 1.00% |
AI Tender Summary
Tender Timeline
Oct 03, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedOct 10, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 13, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender