|
| 1 | SCHEDULE ‘A’ PART - I (Repair External Electrifications) |
| 2 | Supply, Installing on wall, testing and commissioning of 200 Amps (SC rating for 1 Sec 15KA) capacity rising mains made of 1.6mm thick sheet steel enclosure duly painted with powder coating , wall straps, fully PVC insulated 4 Nos aluminum bus bars in convenient sections and suitable for 415 Volts, 3 Phase, 4 wire 50 Hz, AC Supply with extension joints, fire proof barriers, expansion jonts, thrust pads incl jointing and earthing with 2 runs of galvanised iron strips etc as required (Rsining mains confirming to IS 8623 TEC 439.00) and as per direction of Engineer - in - Charge. |
| 3 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of Single pole and neutral poles in the existing MCB DB complete with connections, testing and commissioning etc. as requiredand as per direction of Engineer - in - Charge. |
| 4 | Supplying and fixing 6 way , Double door way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as requiredand as per direction of Engineer - in - Charge. |
| 5 | Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as requiredand as per direction of Engineer - in - Charge. |
| 6 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/recessed steel/PVC conduit including dismantling as required.(Group C)and as per direction of Engineer - in - Charge. |
| 7 | Supplying and fixing 5/6 amp switch piano type on the existing switch box/ cover including connections etc. as requiredand as per direction of Engineer - in - Charge. |
| 8 | Supplying and fixing 15/16 amp switch piano type on the existing switch box/ cover including connections etc. as requiredand as per direction of Engineer - in - Charge. |
| 9 | Supplying and fixing 3 pin 5/6 A socket outlet on the existing switch box/ cover including connections etc. as requiredand as per direction of Engineer - in - Charge. |
| 10 | Supplying and fixing 6 pin 15/16 A socket outlet on the existing switch box/ cover including connections etc. as requiredand as per direction of Engineer - in - Charge. |
| 11 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as requiredand as per direction of Engineer - in - Charge. |
| 12 | Supplying and fixing brass batten/ angle holder including connection etc. as requiredand as per direction of Engineer - in - Charge. |
| 13 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/wooden block including connections etc. as requiredand as per direction of Engineer - in - Charge. |
| 14 | Wiring for circuit/ submain wiring alongwith earth wire with the 2 x 2.5 sq. mm + 1xX 2.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as requiredand as per direction of Engineer - in - Charge. |
| 15 | Wiring for circuit/ submain wiring alongwith earth wire with the 2 x 2.5 sq. mm + 1xX 2.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as requiredand as per direction of Engineer - in - Charge.. |
| 16 | Supplying and fixing 1 or 2 Module (75mm x 75mm), GI box alongwith modular base & cover plate for modular switches in recess etc. as requiredand as per direction of Engineer - in - Charge.. |
| 17 | Supplying and fixing 4 Module (125mm x 75mm), GI box alongwith modular base & cover plate for modular switches in recess etc. as requiredand as per direction of Engineer - in - Charge.. |
| 18 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (two or more coats) including prepariong surface by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 19 | SCHEDULE OF CREDIT:- Unserviceable materials for ight point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm conductor. |
