Tender For Nandishala Cow Shelter Construction Work
Tender Value
1.42 Crore
Estimated cost
Bid Submission
03 Oct 2023
0 days left
EMD
2.84 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mangrol → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Nandishala cow shelter construction work
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulicexcavator )/ manual means over areas (exceeding 30cm indepth. 1.5m in width as well as 10 sqm on plan) includingdisposal of excavated earth, lead upto 50m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed : All kindsof soil |
| 2 | Filling in plinth with locally available river shingle under floors includingwatering ramming consolidating and dressing complete including cost ofshingle sand. |
| 3 | Earth work in excavation/ by mechanical means (Hydraulic Excavator)/manual means over areas (exceeding 30 cm in depth, 1.5m in width as wellas 10 sqm on plan) including disposal of excavated earth, lead upto 50 mand lift upto 1.5 m , disposed earth to be levelled and neatly dressed: |
| 4 | Earth work in rough excavation, banking excavated earth in layers notexceeding 20cm in depth, breaking clods watering, rolling each layer with1/2 tonne roller, or stone or steel rammers and rolling every 3rd and topmostlayer with power roller of minimum 8-10 tonne capacity and dressingup in embankment for roads, flood banks marginal banks and guide banksor filling up ground depressions, lead up to 50 Mtr. and lift up to 1.5Mtr.:All kinds of soil |
| 5 | Supply of dry manure including loading unloading,transportation &stacking at site. Farm yard manure(organic) |
| 6 | Supply & Stacking good soil of earth at site complete including loadingunloading & Transportation etc. Good soil of earth |
| 7 | Supply of different varities of tree/shrubs/climbers according to height andage of the plant at side including loading/unloading & transportationetc.complete Different flowering plants 900mm to1500mm |
| 8 | Supply of different varieties of palms in poly bags/earthen pot according toheight growth and age of plant at site including loading unloading andtransportation etc. complete Fish tale palm 5 to 8 feet |
| 9 | P. & F Squatting Pan (Indian type) white glazed vitreous china 1st qualityW.C. Pan (IS : 2556 Mark) with 100 mm vitreous china P or S trapincluding cutting and making good the wall and floor (excluding the pair offoot rest.) Size 510 mm |
| 10 | P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. wastepipe, dome waste couplings, concealed iron brackets or screws etccomplete. Flat Back (small) size 456x355x265mm. |
| 11 | P&F Marble Urinal Partition slab both sides polished of approved designcut from marble size 900x600mm. Makrana II quality marble having lightspots |
| 12 | P & F Automatic Flushing Cistern of first quality (IS : 774 mark) ofapproved make fitting, siphon with copper tube, C.I. brackets completeincluding cutting and making good the wall. WVC (as per IS : 2556) 10litres. |
| 13 | P & F C.P. brass Urinal Flush Pipe set complete with flanged bracketsof approved make. For 2 Urinals |
| 14 | P & F C.P. Brass flush Valve with C.P. flush bend of approved make.Economy model 32 mm dia. |
| 15 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make withC.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) &32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipewith PVC nut 32 mm complete including cutting & making good the wall :Size 450 mm x 300 mm |
| 16 | P & F Bottle Trap of approved make : C.P Brass 32 mm |
| 17 | P& F waste Coulping with fittings of approved quality /make: C.P Brass 32mm dia |
| 18 | P & F Grating of approved quality/make: Stainless Steel Sheet size 125mmdia. |
| 19 | C.P. Pillar cock, high-neck, 15 mm nominal bore. |
| 20 | Synthetic MATERIAL (PTMT) Pillar cock of approved quality / make15mm nominal bore. |
| 21 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:Brass 400 gm,15mm nominal bore. |
| 22 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete :Brass wt. Not less than 300 gm,15mm. |
| 23 | P & F Flush Cock / Flush Valve (IS : 9758 Mark) for WC ofapproved quality make : CP brass push type 15mm nominal bore. |
| 24 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BISlicense No), of approved make with cover, 25mm dia 1M long G.I. overflowpipe & 25 Cm. long wash out pipe with plug & socket, includingmaking connection etc., complete of approved design: 300 (-do-) |
| 25 | P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS :1239 Mark) including trenching & refilling earth etc.25mm dia nominalbore \"B\" Class |
| 26 | Providing and fixing Polyethylene - Aluminium -Polyethylene (PE-AL-PE)Composite Pressure Pipes as per 15450 : 2004 U.V. stablised with carbonblack having thermal stabillity for hot and cold water supply, capable towithstand temperature upto 80 oC including all special f withittings ofcomposite MATERIAL (engineering plastic blend and brass insertswhwnever required) e.g. elbows, tees, reducers, couplers connectorsetc.with clamps at 1.00 metre spacing.This include the cost of cuttingchases and including testing of joints complete as per direction of EngineerIn charge Internal work - Exposed on Wall 1216 (16mm OD) pipe |
| 27 | Providing and fixing Polyethylene - Aluminium -Polyethylene (PE-AL-PE)Composite Pressure Pipes as per 15450 : 2004 U.V. stablised with carbonblack having thermal stabillity for hot and cold water supply, capable towithstand temperature upto 80 oC including all special f withittings ofcomposite MATERIAL (engineering plastic blend and brass insertswhwnever required) e.g. elbows, tees, reducers, couplers connectorsetc.with clamps at 1.00 metre spacing.This include the cost of cuttingchases and including testing of joints complete as per direction of EngineerIn charge Internal work - Exposed on Wall1620 (20mm OD) pipe |
| 28 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approvedquality /make including joining the pipe with solvent cement rubber ringand lubricant.110 mm dia |
| 29 | Construction of septic Tank in all types of soil with 40 Cm .thick masonryin CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C floor &RCC slab covering with M15 grade c.c. floor, 50 mm thick stone slabpartition walls, 20 mm thick plaster in CM 1:6 finished with neat floatingcement, 4 Nos stone foot rests of approved design ,two No. 450 mm diaeach Ferro cement cover with frame, earth work etc. complete as perapproved drawing including disposal of surplus earth within a lead of 50mtr:- Size 200x100x130 cm.(for 10 users) with 115 mm thick RCC (M-20) slab with Tor steel reinforcement 8mm ? @15 cm c/c bothwaysincluding shuttering complete in all respect. |
| 30 | Construction of septic Tank in all types of soil with 40 Cm .thick masonryin CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C floor & RCCslab covering with M15 grade c.c. floor, 50 mm thick stone slab partitionwalls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4Nos stone foot rests of approved design ,two No. 450 mm dia each Ferrocement cover with frame, earth work etc. complete as per approveddrawing including disposal of surplus earth within a lead of 50 mtr:-Size230 x110 x150cm.(for 20 users) with 115 mm thick RCC (M-20) slabwith Tor steel reinforcement 10mm ? @15 cm c/c bothways includingshuttering complete in all respect. |
| 31 | Providing and laying in position cement concrete including curing,compaction etc. complete in specified grade excluding the cost of centeringand shuttering - All work up to plinth level. M20 grade Nominal Mix 1:1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mmnominal size). |
| 32 | Providing and laying in position cement concrete including curing,compaction etc. complete in specified grade excluding the cost of centeringand shuttering - All work up to plinth level. 1:5:10 (1 cement : 5 coarsesand : 10 graded stone aggregate 40mm nominal size).. |
| 33 | Providing and laying damp-proof course with cement concrete grade M-150 (1 : 2 : 4) mortar prepared with 1% solution of water-proof compoundcomplete as per specification. 50mm thick |
| 34 | Laying of lawns including ploughing levelling breaking of clods manuring& removal of stones etc.(Cost of manure or extra good earth to be paidseperately) Maintenance of lawns for 30 daysor more till the grass forms athick lawns free from weeds & fit fo In rows 15 Cms. apart in eitherdirection |
| 35 | Providing Laying & jointing glazed S.W. pipes grade `A` (IS;651 marked)of approved make with spun yarn & stiff mixture of cement mortar 1:1,excavation & refilling of earth in all types of soil upto 1.2m depth, S.W.fittings, including testing of joints etc, complete. 100mm dia |
| 36 | Planting of trees / Shurbs / hedge & climbers plants at desired distance in arow & watering. |
| 37 | Providing & fixing S.W. square mouth Gully trap `A` grade (IS 651-1992marked) of approved make & design in existing man-hole. Size 100 X100mm |
| 38 | Walls (any thickness) including attached pilasters, buttresses plinth andstring course. |
| 39 | Suspended floors, roofs, landings, staircases, balconies, girders,cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas,lintel, beam, plinth beam etc. |
| 40 | Columns, pillars, posts and struts etc. |
| 41 | Providing and laying in position specified grade of cement concrete forRCC structural elements upto floor Three level including curing,compaction, finishing with rendering in cement sand mortar 1:3 (1 cement:3 coarse sand) and making good the joints and cost of plastizers (ifrequired ) excluding the cost of centering, shuttering and reinforcement forWalls (any thickness) including attached pilasters, buttresses, plinth andstring courses, fillets, columns, pillars, piers, abutments, posts and strutsetc. M20 grade Nominal Mix M20 grade Nominal Mix/ Design Mix |
| 42 | Providing and fabricating reinforcement for R.C.C. work includingstraightening, cutting, bending, placing in position and binding (includingcost of binding wire) all complete up to floor five level. ThermomechanicallyTreated bars (Conforming of relevent IS code) |
| 43 | Construction of Tube-well upto 100 Meter depth and above in all type ofrocks by DTH system and over burden, to accommodate casing pipe offollowing sizes in all types of soils and over burden including lowering ofcasing pipes, but excluding cost of casing pipes as per IS : 2800 (Part I &II) 1979 specifications. The work would be completed after obtaining sandfree water. The tube well should have a throughout bore as per nominal diaof casing pipe: 150mm-do- |
| 44 | Supply of ERW M.S. black casing pipe ISI marked (IS:4270/1992) ofgrade Fe410 of following sizes at site of work. Nominal bore of pipe(mm)150 |
| 45 | Supply of strainer pipes made of ERW M.S. black pipe ISI mark offollowing sizes at the site of work including required size of slotting as perIS:8110-1985.150 mm Nominal Bore. |
| 46 | S & F tube well cover of M.S.sheet (6mm thick) with nuts and boltscomplete for casing size:150mm dia |
| 47 | S & F M.S. clamp, set of 50 ×6mm flat iron with nuts and bolts etc. forholding the riser pipe assembly of submersible pump set. |
| 48 | Installation of submersible motor pump set in Tube-well/open wellcomplete ( labour charges only) including transportation of tripod, chainpulley block & any other material required for lowering purpose. |
| 49 | Supplying and installation of 32 mm dia G.I. pipe medium class IS 1239marked in 3m length including all accessories and fittings required forinstallation of hand pump. |
| 50 | Brick work with F.P.S. bricks of class designation 75 in superstructureabove plinth level upto floor V level in all shapes and sizes in : Cementmortar 1 : 4 (1 cement : 4 coarse sand) |
| 51 | Half brick masonry in Superstructure , above plinth level upto floor V levelusing bricks of designation 75 Cement mortar 1 : 6 (1 cement : 6 coarsesand) |
| 52 | Supply & Planting of shady plants (Neem, Peepal, Goolar, Jamun, Imli orother specified) along road side including the following activities :- |
| 53 | Random Rubble stone masonry for with hard stone in foundation and plinthin Cement Sand mortar above 30 CM thick wall in: Cement MortarCement Mortar 1:5 ( 1-Cement : 5-Sand). |
| 54 | Random Rubble stone masonry with hard stone in superstructure aboveplinth level and upto Three Levelabove 30cm. thick walls in : CementMortar Cement Mortar 1:5 ( 1-Cement : 5-Sand). |
| 55 | P & F 1st quality Heavy Duty Vitrified Double Charged tiles on floor,skirting and steps etc.in different sizes (thickness minimum 10mm) withwater absortion less than or equal 0.08% and conforming to IS 15622 ofapproved make in all colour and shade, laid with 20 mm thick CM 1: 4including grounting the joints with white cement and matching pigment etccomplete.size 600 mm X 600mm |
| 56 | Distempering with 1st quality acrylic washable distemper (ready mixed) ofapproved manufacturer and of required shade and colour completeincluding all scaffolding as per manufacturer\"s specification. Two or morecoats on new work including prepartion of base with primer, putty, lippyetc complete in all respect. |
| 57 | Structural steel work in single section fixed with or without connectingplate including cutting, hoisting ( height upto 10 m), fixing in position andapplying a priming coat of approved steel primer all complete. |
| 58 | Providing and fixing T-iron frames for doors, windows and ventilators ofmild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cmlong embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) orwith wooden plugs and screws or rawl plugs and screws or with fixingclips or with bolts and nuts as require including fixing of necessary butthinges and screws and applying a priming coat of approved steel primer. |
| 59 | Providing and fixing 1mm thick M.S. sheet garrage door shutters withframe of 40 x 40 x 6mm. angle iron 3mm M.S. gusset plates at the junctionand corners including all fittings and applying a coat of approved steelprimer : (Excluding cost of frames) Using flats 30 x 6mm for diagonalbraces and central cross piece. |
| 60 | Steel work in built up tubular trusses including cutting, hoisting ( heightupto 10 m)fixing in position and applying a priming coat of approved steelprimer, welded and bolted including special shaped washers etc. complete.Hot finished welded type tubes. |
| 61 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarsesand : 4 stone aggregate 10mm and down gauge) including finishing withcement mortar 1:3 (1 cement : 3 fine sand) as per standard design : |
| 62 | Providing corrugated G.S. sheet roofing including vertical / curved surfacefixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter withbitumen and G.I. limpet washers or with G.I. limpet washers filled withwhite lead and including a coat of approved steel primer and two coats ofapproved paint on overlapping of sheets complete (upto any pitch inhorizontal/ vertical or curved surfaces) excluding the cost of purlins,rafters and trusses and including cutting to size and shape wheneverrequired. 1.00 mm thick with zinc coating not less than 275 gm/m2 |
| 63 | Stone slab roofing on ground floor with fine grained stone slab fromapproved quarry including filling of joints of parapet and slab on both sidesin cement sand mortar 1:4, with ceiling pointing in cement sand mortar 1 :3 complete as per specification and instruction of Engineer In Charge |
| 64 | Providing laying, spreading and compacting specified graded sand, gravelas per table 400-1, 400-2 or any other coarse Material as per design mix,as per CBR in sub base course including premixing the Material at OMCin mechanical mixer (Pug mill), carriage of mixed Material, spreading inuniform layers with Motor Grader, F.E. Loader on a prepared base andcompacting with vibratory roller to achieve desired density (as per IS2720) including all Material, labour, machinery, lighting, guarding,barricading and maintenance of Driversion complete. (MoRTHspecification : clause 401). with all lead & lift |
| 65 | Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laidover and jointed with grey cement slurry mixed with pigment to match theshade of the slab including rubbing and polishing complete with base ofcement mortar 1 : 4 (1cement : 4 coarse sand) : For area of each slab from901 to 2000 Sq.Cm : 30 mm thick slab. |
| 66 | Random rubble dry stone Kharanja under floor. |
| 67 | Plaster on new surface on walls in cement sand mortar 1:4 includingracking of joints etc. complete fine finish 20mm thick . |
| 68 | Brick on edge flooring with bricks of class designation 75 including cement slurry &pointing in CM (1 : 3) etc. complete laid on 20 mm thick bed of : Cement Sand Mortar1 : 6 |
| 69 | Providing laying, spreading and compacting specified graded sand, gravelas per table 400-1, 400-2 or any other coarse Material as per design mix,as per CBR in sub base course including premixing the Material at OMCin mechanical mixer (Pug mill), carriage of mixed Material, spreading inuniform layers with Motor Grader, F.E. Loader on a prepared base andcompacting with vibratory roller to achieve desired density (as per IS2720) including all Material, labour, machinery, lighting, guarding,barricading and maintenance of Driversion complete. (MoRTHspecification : clause 401). with all lead & lift |
| 70 | Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laidover and jointed with grey cement slurry mixed with pigment to match theshade of the slab including rubbing and polishing complete with base ofcement mortar 1 : 4 (1cement : 4 coarse sand) : For area of each slab from901 to 2000 Sq.Cm : 30 mm thick slab. |
| 71 | Supplying and fixing rough dressed stone sills, dasa, coping, cornices sriwan, stringcourses etc. in cement mortar 1 : 4 including pointing with admixture of pigmentmatching with the stone shade : 50 mm thick. |
| 72 | Painting with synthetic enamel paint of approved brand and manufacture togive an even shade : |
| 73 | Providing and fixing pressed steel door frames confirming to IS 4351manufactured from commercial mild steel sheet of 1.25 mm thicknessincluding hinges jamb, lock jamb, bead and if required angle threshold ofmild steel angle of section 50x25mm, or base ties of 1.25mm pressed mildsteel welded or rigidly fixed together by mechanical means, adjustable lugswith split end tail to each jamb including steel butt hinges 2.5mm thickwith mortar guards, lock strike-plate and shock absorbers as specified andapplying a coat of approved steel primer after pre-treatment of the surfaceincluding filling with CC 1:2:4(M15 grade) complete as directed byEngineer-incharge : Profile B |
| 74 | 120cm. high fencing with angle iron posts 50x50x6mm. placed at every 3Mtr. apart 30cm. in ground embedded in cement concrete 1:3:6(30x30x45cm) corner & every tenth posts to be strutted with 50x50x6mmangle iron provided with three horizontal lines and two diagonals of blackbarbed wire between two posts fitted and fixed with G.I. staple includingearth work in excavation etc. complete. |
| 75 | Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laidover and jointed with grey cement slurry mixed with pigment to match theshade of the slab including rubbing and polishing complete with base ofcement mortar 1 : 4 (1cement : 4 coarse sand) : For area of each slab from901 to 2000 Sq.Cm : 30 mm thick slab. |
| 76 | Random rubble dry stone Kharanja under floor. |
| 77 | Pointing on stone masonry in cement sand mortar 1:3 (1 cement : 3sand) : Raised and cut pointing. |
| 78 | Finishing wall with water proofing cement paint of approved brand andmanufacture and or required shade to give an even shade including allscaffolding: New work (Two or more coats applied @ 3.84 kg/10 sqm). |
| 79 | Providing and applying white cement based putty over plastered surface toprepare the surface even and smooth complete |
| 80 | Plaster on new surface on walls in cement sand mortar 1:4 includingracking of joints etc. complete fine finish 20mm thick . |
| 81 | Providing and laying of paver block as per IS 15658 : 2006 (Indianstandard for precast concrete block for pavingspecification) and IRC :SP:63-2004 (guidelines for the use of interlocking concrete blockpavement) M-30, 60 mm thick to be used in non traffic areas like buildingpremises, monument premises, land scapes, public gardens/ park, domesticdrives, paths and patios, Embankment slopes, sand stabilization Area etc.(As per table 1 of IS 15658:2006 (B) Category „B? Denated only two sidelike I,Z,T shape etc. as per IRC SP 63:2004 |
| 82 | Supply and erection of M.S. Galvanized Octagonal pole ( as per BSEN 40-3-3:2003 /BSEN 10025/IS 2062 IS:875 Part-1 – 2015/ for MS plate forbase flange )of following length and dimension as per table P-01 with baseplate on the cement concrete foundation of M-20 grade (1:1.5:3) as per IS456/IS 2911. with the help of anchor bolts of grade 6.8 (IS: 1367 P III ).The pole shall have a weatherproof flush door andlocking arrangements.complete in all respect. All as per pre approved by Engineer in charge. Foradditional technical parameters of products/ work , refer Annexure \"A\"attached with this BSR Octagonal MS Poles made of S-355JO grade steelsheet , folded lengthwise to obtained Octagonal shape, having singlelongitudinal seam weld and hot dipped galvanised internally & externallyin accordance with IS 2629. (See Table P -01 for specs.) 9 Mtr. |
| 83 | Supply, Erection and Fixing of hot dipped galvanised M.S. Overhang (48.3X 3.25 mm) with cap (400 x 88.9 / 114.3 x 3.25 mm) over the existingpoles. All as per pre approved by Engineer in charge. For additionaltechnical parameters of products/ work , refer Annexure\"A\" attached with this BSR .Single arm overhang |
| 84 | Supply and fixing of ISO certified company made 11kV pin insulator( IS731/ 1971) with minimum creepage distance of 300mm on existing bracketincluding all accessories like hot dipped GI spindle and nuts etc (as perspecificationof Discom). All as per pre approved by Engineer incharge.For additional technical parameters of products / work , referAnnexure \"A\" attached withthis BSR . |
| 85 | Providing and fixing of IP 65 protected Polycarbonate / Polysterene fusebox moulded with inside knock outs of following size with hinged cover,transparent window, PU gasket, locking arrangement, duly holded with 2nos. pole clamps of 20 mm x 3 mm flat with nut andbolts, The box shall be provided with Din rail, 4 / 8 way 10.0 / 16.0 sq.mmheavy duty connector, earth terminal, complete in all respect. All as per preapproved by Engineer in charge. For additional technical parameters ofproducts/ work , refer Annexure \"A\" attached with this BSR .225 mm X225 mm X 100 mm |
| 86 | Providing & Fixing of thermoplastic Polycarbonate cable junction boxeswith IP66 rating of protection & knock out for cable entry/out of followingsizes including clamps for holding the box, including cost of DIN rail forMCB mounting, 10 Sqmm 4 pole connectors for cables terminals,threaded cable glands made of polyamide material etc. complete in allrespect. All as per pre approved by Engineer in charge. For additionaltechnical parameters of products/ work , refer Annexure \"A\" attached withthis BSR .300mm X 200mm X125mm |
| 87 | Providing & Fixing of IP - 65 protected impact resistant polycarbonate /Polysterene enclosures with knock out for cable entry/out including fixingwith nut, bolt, fatner etc as required complete in all respect of followingsizes. All as per pre approved by Engineer in charge. For additionaltechnical parameters of products/ work , refer Annexure \"A\" attached withthis BSR .180 x 180 x 91 mm |
| 88 | Supplying and drawing of ISO certified company made XLPE insulatedLT Aerial bunched Aluminium conductor cable confirming to IS14255/1995 and IS 398 (Pt-4)/ 1994 on existing cross arms through I hookwith all necessary T&P required including binding and twistingetc. complete in all respect as requiredas per PWD / DISCOMspecification. All as per pre approved by Engineer in charge. For additionaltechnical parameters of products/ work , refer Annexure \"A\" attached withthis BSR3 X 25 sq. mm. + 1X25 sq. mm. (insulated) |
| 89 | Providing & Fixing of IP 20 box made out from 1.2mm thick CRCA sheetsteel with depth of minimun 30 mm and finished with powder coating andsuitable for mounting LED tube including side covers, holders , internalwiring to illuminate the single sided connection LED tube. ( Without tube).All as per pre approved by Engineer in charge. For additional technicalparameters of products/ work , refer Annexure \"A\" attached with this BSR.Suitable for 4\" LED Tube shape fixture 2 X 18/20 W |
| 90 | Providing & Fixing of IP 20 box made out from 1.2mm thick CRCA sheetsteel with depth of minimun 30 mm and finished with powder coating andsuitable for mounting LED tube including side covers, holders , internalwiring to illuminate the single sided connection LED tube. ( Without tube).All as per pre approved by Engineer in charge. For additional technicalparameters of products/ work , refer Annexure \"A\" attached with this BSR.Suitable for 4\" LED Tube shape fixture 2 X 18/20 W |
| 91 | Providing & Fixing of two pin energy efficient compact fluorscent lamp inexisting holder/fixture as required complete in all respect. All as per preapproved by Engineer in charge. For additional technical parameters ofproducts/ work , refer Annexure \"A\" attached with this BSR .11 watt |
| 92 | Wiring of light point/ fan point/ exhaust fan point/ call bell point as perPWD specification for electrical Works with ISI marked 1.5 sq. mmnominal size FR PVC insulated unsheathed flexible copper conductor 1.1kV grade (IS:694) and 1.5 sq. mm nominal size FR PVC insulatedunsheathed flexible copper earth conductor 1.1 kV grade (IS:694) inrecessed ISI marked MMS ( IS:9537 P - III ) vergin material PVC conduit& it\"s all accessories( J.B. , Bends etc.) , round tiles,18 SWG G.I. box withearth terminal, 6 A switch , 3 pin ceiling rose/ Lamp holder / 3 pointConnector, 3.0 mm thick ISI marked phenolic laminated sheet (IS : 2036 -1995), Al. alloy/ cadmium plated iron screws 20 mm cup washers etc. allas per pre approved by Engineer in charge, making connections, testingetc. complete as required. For specification of copper Conductor, PhenolicLaminated sheet\"s & Electrical/ Wiring accessories refer Chapter E - 04, E -05 & E - 07. For additional technical parameters of products/ work , referAnnexure \"A\" attached with this BSR. Short point (up to 3 mtr.) |
| 93 | Wiring of light point/ fan point/ exhaust fan point/ call bell point as perPWD specification for electrical Works with ISI marked 1.5 sq. mmnominal size FR PVC insulated unsheathed flexible copper conductor 1.1kV grade (IS:694) and 1.5 sq. mm nominal size FR PVC insulatedunsheathed flexible copper earth conductor 1.1 kV grade (IS:694) inrecessed ISI marked MMS ( IS:9537 P - III ) vergin material PVC conduit& it\"s all accessories( J.B. , Bends etc.) , round tiles,18 SWG G.I. box withearth terminal, 6 A switch , 3 pin ceiling rose/ Lamp holder / 3 pointConnector, 3.0 mm thick ISI marked phenolic laminated sheet (IS : 2036 -1995), Al. alloy/ cadmium plated iron screws 20 mm cup washers etc. allas per pre approved by Engineer in charge, making connections, testingetc. complete as required. For specification of copper Conductor, PhenolicLaminated sheet\"s & Electrical/ Wiring accessories refer Chapter E - 04, E -05 & E - 07. For additional technical parameters of products/ work , referAnnexure \"A\" attached with this BSRMedium point (up to 6 mtr.) |
| 94 | Long point (up to 10 mtr..) |
| 95 | S&F following sizes (dia.) of ISI marked MMS ( IS:9537 P - III ) verginmaterial PVC conduit as per PWD specification for electrical Works alongwith its accessories (IS: 3419 ) as required in recess including cutting thewall, covering conduit and making good the same as required. All relativeand latest acceptance tests reports by any NABL accredited lab for theconduit shall be submitted before execution & All as per pre approved byEngineer in charge. For additional technical parameters of products/ work ,refer Annexure \"A\" attached with this BSR .MMS ( IS:9537 P - III ) PVCconduit 25 mm |
| 96 | Wiring of 3/5 pin 6 amp. Light plug point as per PWD specification forelectrical Works with ISI marked 1.5 sq. mm nominal size FR PVCinsulated unsheathed flexible copper conductor 1.1 kV grade (IS:694) and1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copperearth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS (IS:9537 P - III ) vergin material PVC conduit & it\"s all accessories( J.B. ,Bends etc.) , round tiles, 18 SWG Hot Dipped Galvanized Modular Boxwith earth terminal, 6 A modular switch, 3/ 5 pin 6 A modular socket,Modular face plate with grid plate, screws etc,all as per pre approved byEngineer in charge, making connections, testing etc. complete as required.For specification of copper Conductor, Phenolic Laminated sheet\"s &Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07. Foradditional technical parameters of products/ work , refer Annexure \"A\"attached with this BSR . On board |
| 97 | Laying and fixing of PVC /XLPE power Cable of 1.1 KV grade offollowing size on wall/ cable tray with saddles/MS flat clamp etc asrequired. All as per pre approved by Engineer in charge. For additionaltechnical parameters of products/ work , refer Annexure \"A\" attached withthis BSR .upto 35 sqmm |
| 98 | Providing & Fixing of ISO Certified company made BEE Star rated copperwounded double ball bearing capacitor start, aluminium body & Metallicblade ceiling fan as per PWD specification for electrical Works,conforming to IS:374-2019, & IS:1885 -P-V- 1981. with down rod up to30 cm with secondary support safety cable ( steel wire ) , cotter pin with 3x 1.5 sq.mm pvc insulated flexible copper conductor making connectiontesting etc. as required. Appropriate OEM test certificate shall besubmitted by contractor. All as per pre approved by Engineer in charge.For additional technical arameters of products/ work , refer Annexure \"A\"attached with this BSR . 1200 mm Sweep BEE 2 Star rated (service value>=4.5 to < 5 ) |
| 99 | Supplying and drawing FR PVC insulated & unsheathed flexible copperconductor as per PWD specification for electrical Works with ISI marked(IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be madefrom99.99% purity copper, class 5 stranding in acc. to IEC 60228 for lowerwatt loss , oxygen free ( <10 ppm) for less chances of oxidization andhigher silver content for gives better conductivity , insulation PVC type A,flame retardant as per IS 10810-53, better amperage rating as per VDE0298 part 4, , in existing surface or recessed PVC/ MS conduit/casingcapping including all as per pre approved by Engineer in charge,makingconnections, etc. as required. OEM Must have its own in house NABL labsetup for all testing facilities for wires. For additional technical parametersof products/ work , refer Annexure \"A\" attached with this BSR . 4 x 2.5sq.mm |
| 100 | Providing & Fixing of 240/415 V AC MCB with positive isolation ofbreaking capacity not less than 10 KA (B/ C tripping characteristic as pertype of load and site requirement) 4KV impulse withstand voltage, as perPWD specification for electrical Works with ISI marked IS 8828(1996) /conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip freemechanisum , energy limiting of class 3 as per IEC, minimum phasetermination capacity of 35sq.mm. , onductorline load reversibility, labelholding facility , IP 20 contact protection and fitted with existingdistribution board/sheets, min. operation 20,000 upto 32 A rating and10,000 upto 63 A, 5000 for 80 A rating including making connections,testing etc. as required. . OEM shall have submit NABL / CPRI / ERDAcrediated lab test reports before execution & All as per pre approved byEngineer in charge. For additional technical parameters of roducts/ work ,refer Annexure \"A\" attached with thisBSR .Double pole MCB |
| 101 | 40 A rating |
| 102 | Providing & Fixing of recessed/surface mounting heavy duty sheet steel 1.6mm thick End Box as per PWD specification for electrical Works fordistribution board duly phophatised powder coated complete as required.All as per pre approved by Engineer in charge. For additional technicalparameters of products/ work , refer Annexure \"A\" attached with this BSR .For TPN 6 way DB |
| 103 | Providing & Fixing of ISI marked (IS :3854) 16 amp. flush type nonmodular switch as per PWD specification for electrical Works, made outfrom industrial grade Polycarbonate or fire resistant ABS material ,minimum width of switch toggle should not less then 18 mm, brassterminal & captive screws including cutting hole in tile and makingconnection testing etc. as required. All as per pre approved by Engineer incharge.For additional technical parameters of products/ work , referAnnexure \"A\" attached with this BSR |
| 104 | Providing & Fixing of 3/6 pin 16 amp flush type non modular socket as perPWD specification for electrical Works, made out fromindustrial gradePolycarbonate or fire resistant ABS material, brass terminal with Porcelainbased back cover & captive screws including cutting hole in tile andmaking connection testing etc. as required. All as per pre approved byEngineer in charge. For additional technical parameters of products/ work ,refer Annexure \"A\" attached with this BSR . |
| 105 | Providing and fixing of non modular power plug point accessories as perPWD specification for electrical Works with 18 SWG G I box of size 175x 100 x 60 mm with earthing terminal/ connector on recessed/surface withsuitable sizephenolic laminated sheet (IS : 2036 - 1995) cover including cost of 16amp. Switch (IS :3854) and 3/6 pin 16 amp. socket outlet [ as per detailedin respective item in BSR], making connection , testing , etc. as required.All as per pre approved by Engineer in charge. For additional technicalparameters of products/ work , refer Annexure \"A\" attached with this BSR . |
| 106 | Plate Earthing as per PWD specification for electrical Works as perIS:3043 with Hot dipped G.I. Earth plate of size 600mm x 600mm x6.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia.G.I. \"B\" class watering Pipe ,including all accessories like nut, bolts,reducer, nipple, wire meshed funnel, and Heavy duty weather proof polypropyleneearth pit chamber with lockable Jam free lid suitable for safeworking load 5000 Kg or more of size Top Dia. 225 to 260 mm, BottomDia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipecomplete with alternate layers salt and coke/ charcoal, testing of earthresistance for value of 5 ohms or less as required & must record byengineer in charge during site visit and ensure to enter in measurmentbook. All as per pre approved by Engineer in charge. For additionaltechnical parameters of products/ work , refer Annexure \"A\" attached withthis BSR . |
| 107 | Providing & Fixing of ISO certified company made TP&N 415 V sidehandle operated double break fuse switch unit in sheet steel enclosure asper PWD specification for electrical Works conforming to IS/lEC 60947-3: 1999 (W/O HBC fuses) including making connections with suitable lugs,testing etc. as required. Appropriate type test certificate / OEM test reportshall be submitted . All as per pre approved by Engineer in charge. Foradditional technical parameters of products/ work , refer Annexure \"A\"attached with this BSR .63 A rating |
| 108 | Providing & Fixing of Normal / High Output High pressure sodiumvapour/ Metal halide / Halogen lamp as required complete in all respect.All as per pre approved by Engineer in charge. For additional technicalparameters of products/ work , refer Annexure \"A\" attached with this BSR.HPSV Tubular lamp Normal Output 250 Watt |
| 109 | Supply Installation testing & Commissioning of ISO certifiedmanufacturer made Monoblock motor pump set ISI marked (IS:9079-2002) with TEFC motor, motor should be IE2 class as per IEC 60034-2-1: 2007, IEC 60034-30: 2008, & IS12615:2011. with Stainless steelImpellor, Stainless steel shaft, Mechanical seal, Single/Three phase (240 -440 V ) permanent split capacitor type (PSC), fitted with thermal overloadprotection, . Including cost of hardware etc on existing platform complete.Pump shall have following HP Rating, phase, Head, minimum Dischargerespectively complete in all respect. Appropriate type test certificate /OEM test report shall be submitted. All as per preapproved by Engineer in charge. For additional technical parameters ofproducts/ work , refer Annexure \"A\" attached with this BSR .5.0 HP, 3-Ø,(24-44)Mtr, (680-370) LPM |
| 110 | Providing & Fixing of IK07 IP 66 protected LED Street Light Luminaireon existing bracket/pole. Fixture made of powder coated single piecepressure die cast aluminum LM6/ ADC12 material with heat dissipationfins on housing with UV tabilized PC/Toughened Glass cover (UVstablzation report submitted for UV cover ) and secondary lens on eachLED & should be SMD type . The System level Luminaire efficacy >=120lm/ wt with High Power LEDs is to be used and potted driver must bepotted & has a unique BIS R number with Input Voltage AC 120 to 270 VAC with High voltage Cutoff @>=300 V AC and Auto resetting Safety,Input Frequency 50Hz±3% Power Factor >0.95 driver Efficiency >85%,THD(I) <10% Humidity 10% to 90% RH Working Temp -5C to 45C .driver current <1000mA shown in LM79 eport. The luminaire shall beBIS certified and T.C. certified. Life Expectancy Equal or more than 50000burning hrs with Minimum 70% lumen maintened ,color Rendering Index>70 and CCT 5700K +355K. Surge protection shall be min = 4 KVinternal and min 10 KV external. driver should be Phase to phaseprotection of 440 V for 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow ceability /authenticity. Fixtureshall be AS PER IS 10322 Complianced.OEM Must have its own in houseNABL lab setup for all testing facilities for LED fixtures. (LM79/LM80)Certificate/ report with liable warranty of product/accessories from OEMshall be submitted. All as per pre approved by Engineer in charge. Foradditional technical parameters of products/ work , refer Annexure \"A\" |
| 111 | Providing & Fixing of Street light bracket made out from following size of\" B \" class , Medium class G.I. Pipe confirming to IS : 1239 P - 1 ( 2004 )with heavy duty pole clamp, Saddles suitable fastners etc. as required. Allas per pre approved by Engineer in charge. For additional technicalparameters of products/ work , refer Annexure \"A\" attached with this BSR.32 mm Dia. |
| 112 | Supplying and Laying ISI marked P.V.C. insulated submersible cable asper PWD specification for electrical Works confirming to IS:694 and asper IS 8130 : 2013 of 1.1 kV grade .Wire shoul d be made from 99.99%puritycopper, class 5 stranding in acc. to IEC 60228 for lower watt loss ,oxygen free ( <10 ppm) for less chances of oxidization and higher silvercontent for gives better conductivity , insulation PVC type A ,flameretardant as per IS 10810-53, better amperage rating as per VDE 0298part 4 including making connection etc. as required. OEM Must have itsown in house NABL lab setup for all testing facilities for wires. All as perpre approved by Engineer in charge, making connections. For additionaltechnical parameters of products/ work , refer Annexure \"A\" attached withthis BSR. |
| 113 | Supply Installation testing & Commissioning of ISO certified companymade DOL/Star-Delta Starter panel made out from 1.6 mm thick powdercoated CRCA sheet, enclosure comprising of over load protection relay,short circuit & single phasing protection, Illuminated ON / OFF pushbuttons, ammeter, voltmeter, indicating lamps etc. suitable for followingrating motors complete in all respect. Appropriate type test certificate /OEM test report shall be submitted. All as per pre approved by Engineer incharge. For additional technical parameters of products/ work , referAnnexure \"A\" attached with this BSR .0.5 HP to 3.0 HP (DOL starter) |
| 114 | Providing & Laying of synthetic rope for submersible pump ISI marked(IS:5175) of following sizes. complete in all respect. All as per preapproved by Engineer in charge. For additional technical parameters ofproducts/ work , refer Annexure \"A\" attached with this BSR .20mm(suitable for 90 mm OD pipe) |
| 115 | Providing & Fixing of HDPE pipe ISI mark (IS:4984/ 2016) for watersupply (suitable for submersible & jet pump) with required fittings iesocket, elbows, tee etc. complete in all respect. All as per pre approved byEngineer in charge. For additional technical parameters of products/ work ,refer Annexure \"A\" attached with this BSR .50 mm OD 6 kg / cm2 |
| 116 | Wiring of 3/5 pin 6 amp. Light plug point as per PWD specification forelectrical Works with ISI marked 1.5 sq. mm nominal size FR PVCinsulated unsheathed flexible copper conductor 1.1 kV grade (IS:694) and1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copperearth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS (IS:9537 P - III ) vergin material PVC conduit & it\"s all accessories( J.B. ,Bends etc.) , round tiles, 18 SWG Hot Dipped Galvanized Modular Boxwith earth terminal, 6 A modular switch, 3/ 5 pin 6 A modular socket,Modular face plate with grid plate, screws etc,all as per pre approved byEngineer in charge, making connections, testing etc. complete as required.For specification of copper Conductor, Phenolic Laminated sheet\"s &Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07. Foradditional technical parameters of products/ work , refer Annexure \"A\"attached with this BSR . On board |
| 117 | Providing & Fixing of of M.S. J- hook of standard design made out of 16mm dia. M.S. round bar and fixed with cement concrete mortar withrequired support asrequired. |
AI Tender Summary
Tender Timeline
Oct 02, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedOct 03, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 03, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender