Military Engineer Services-MES has published Tender For Repair To Flooring, Wall Panelling, Flase Ceiling, Roofing, Plastering , Sewage Lines, Septic Tank And Allied Building Works At Tangste , Durbuk Under Ge 860 Ews. Submission Date for this Tender is 25-10-2023. Sewerage Construction Tenders in durbuk Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Dismantling of boarding in wall/ceiling, any description, fixed in any position with nails or screws complete all as specified and directed. Note: Taking down carefully old FTL fitting recessed mounted light fittings/ceiling complete with all accessories and making necessary electric connection, complete all as specified and as directed. |
| 2 | M&L for 9mm Pre-laminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws/nails to timber frame work in wall portion complete all as specified and directed. |
| 3 | Providing & fixing false ceilingwith semi perforated 12mm thick micro tegular edged GRG at all heights with GRG false ceiling tiles of size 595X 595 mm of approved texture design and patterns having moisture content less than 2% humidity resistance of 99% NRCO.50 to 0.75 as per IS 8225:1987,Noncombustible as per BS476(part4)-1970 and light reflectance of 85%(min) to be laid in true horizontal level suspended on inter locking metal T-grid of hot dipped galvanised iron sec of 0.33 mm thick (galvanised @ 120 grams per sqm incl both sides) comprising of main -T runners of size 15x 32 mm of length 3000mm ,cross-T of size 15X32 mm oflength 600 mm to form grid module of size 600 x600 mm suspended from ceiling using galvanized mild steel items (galvanizing @80mm per sqm ) i.e 50mm long 8 mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shapeleveladjuster of size 85 x 25 x 2 mm ,Galvanised iron perimeter wall angle of size 24 x 24x 0.40 mm of length 3000 mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws.The work shall be carried outas per specifications, drawing and as per directions of the Engr-in-Charge. |
| 4 | Dismantling of timber scantling in fillets, posts, rafters, purlins etc under 40Sq. Cm in section in framed work complete all as specified and directed. |
| 5 | M&L for 2nd class hard wood timber scantling plain fillets square, rectangular in section area exc 13 Sqcm and not exc 25 Sqcm secured with nails complete all as specified and directed. |
| 6 | M&L for 2nd class soft wood fillets sectional area exc 3 and n exc 6 Sq cm rectangular or triangular in section but bullnosed, splayed, chamfered or rounded on one edge of face, secured with nails or brads, complete all as specified and as directed. |
| 7 | Taking down of chowkats with shutter (without taking of shutter from frame)n exc 1.5 Sqm each complete all as specified and directed. |
| 8 | Taking down of chowkats with shutter (without taking of shutter from frame)exc 1.5 Sqm but n exc 4.0 Sqm each complete all as specified and directed. |
| 9 | Taking down of Shutters of any description n.exc 1 sq. m each complete all as specified and as directed. |
| 10 | Taking down of Shutters of any description exc 1 Sq. m but n.exc 2.00 Sqm each complete all as specified and as directed. |
| 11 | S&F of 2nd class hard wood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 12 | S&F plain 2nd class hardwood 35mm thick framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 13 | S&F for 30mm thick 2nd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) completed all as specified and directed. |
| 14 | S&F of 100mm size, butt hinges, cold rolled steel with screw, medium weight , ISI marked complete all as specified and directed. |
| 15 | S&F of 75mm size, butt hinges, cold rolled steelwith screw, medium weight , ISI marked complete all as specified and directed. |
| 16 | S&F 125mm long Aluminium, anodised, barrel tower bolt, having dia/shoot not less than 10 mm with screws complete all as specified and directed. |
| 17 | S&F 100mm long Aluminium, anodised, barrel tower bolt, having dia/shoot not less than 10 mm with screws complete all as specified and directed. |
| 18 | S&F 125mm size, extruded aluminium alloy handles fabricated type anodised complete all as specified and directed. |
| 19 | S&F 100 mm size, extruded aluminium alloy handles fabricated type anodised complete all as specified and directed. |
| 20 | S&F of 250mm long, Mild steel , sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 21 | M&L for preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primercomplete all as specified and directed. |
| 22 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 23 | S&F for SDC Laminated flooring 8mm thick of any coloured manufactured by Direct Pressure Laminated (DPL) wherein the empty Abrasive aluminium oxide overlay alongwith metamine impregnated decorated film is directly fused with the back with flooring locking profile in designed with double click locking system on the length and single locking width alongwith desire locking strength and directed. |
| 24 | Dismantling of plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern roof covering/wall complete all as specifed and directed. |
| 25 | M&L for 0.50mm thick CGI sheets fixed to wall/roof with two corrugations side lap, fixed with L- type or J type or cranked hook bolts and washers with grade of zinc coating 275 complete all as specified and directed. |
| 26 | M&L for 0.50mm thick CGI sheets fixed to wall/roof with two corrugations side lap, fixed with L- type or J type or cranked hook bolts and washers but except sheeting complete all as specified and directed. |
| 27 | M&L 0.50 mm thick plain galvanised mild steel sheeting, in ridges, hips, valley gutter, drip and straight flashings fixed with L- type or J-type or cranked hook bolts and washers with grade of zinc coating 275 complete all as specified and directed. |
| 28 | M&L for two coat of synthetic enamel paint over a coat of red oxideon new steel surfaces of any description, not otherwise described over 10cm width or girth including preparing new zinc or galvanised surfaces to receive painting by coating with mordant solution incl washing and cleaning etc completed all as specified and directed. |
| 29 | M&L for preparing old painted steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint all asspecified & directed by the Engr-in-Charge. |
| 30 | Taking down cement plaster on brick or stone etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 31 | M&L for rendering 15 mm thickon fair faces ofbrick work orconcrete surfaces in cement mortar 1:4 finished even and smooth (with out using extra cement) complete all as specified and directed. |
| 32 | M&L for preparation of new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer complete all as specified and directed. |
| 33 | Demolition of cement concrete (un-reinforced) in ground floors & paving n.exc 15 cm thickness (below or above ground level) complete all as specified anddirected. |
| 34 | M&L for 25 mm thick cement concrete type B - 1, 1:2:4 using (20 mm graded stone aggregate)as in levelling course over sub base to receive floor finishes complete all as specified and as directed. |
| 35 | M&L Screed bed or bedding layer 20 mm thick in cement mortar 1:4 on floors for laying floor finish complete all as specified and as directed. |
| 36 | S&F coloured chequered cement concrete tiles 30 cm x 30cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified and as directed. |
| 37 | M& L for cement concrete 75mm thick type D - 2 , 1:4:8 using 40mm graded crushed stone aggregateas in sub base to receive floor finish etc complete all as specified and as directed. |
| 38 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed. |
| 39 | Demolition and breaking up drain pipes (SGSW, AC or reinforced concrete) set in cement mortar internal dia of pipe 150 mm, complete all as specified and directed. |
| 40 | M&L Concrete bed 1:4:8 type D-2to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested bore of pipe in 150mm complete all as specified and as directed. |
| 41 | S&F 150mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches complete all as specified. |
| 42 | S&F 150mm dia bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 43 | Demolition and breaking up drain pipes (SGSW, AC or reinforced concrete) set in cement mortar internal dia of pipe 75 mm, in any position complete all as specified and directed. |
| 44 | S&F 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floors complete all as specified and as directed. |
| 45 | S&F 75 mm dia bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 46 | S&F 75 mm dia PVC (SWR) vent cowl, complete all as specified and directed. |
| 47 | Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in concrete, brick work masonary, etc including taking out embedded portion and making good disturbed ground complete all as specified and as directed. |
| 48 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out in hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and as directed. |
| 49 | M & L for Plain cement concrete type C-2, 1:3:6 (Using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. |
| 50 | M&L for mild steel work in angleiron post and struts in fencing including cutting tops to shape as directed, drilled holes, notching for wire, embeding in concrete etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling,bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 51 | Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed. |
| 52 | S&F chain link fencing of MS GI wire mesh of size 50 x 50 mm of 3 mm dia of GI wire including line wires any mesh, size and type to any type standards rails straining bolts, etc incl provision of binding wire complete all as specified and as directed. |
| 53 | S & F Mild steel 10 mm dia round bar and fixed independently to angle iron for chain link fencing cut to length, bend to shape required and directed including taking down old rusted part complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
