Tender For Modification Of Old And Small Oven (Heating Chamber) By Dismantling To 24 Kw Oven (Heating Chamber) With Double Decker Trolley At Electricity Transformer Repairing Workshop Sultanpur And Sohawal Under Ewd-Ayodhya
Tender Value
11.22 Lakhs
Estimated cost
Bid Submission
09 Oct 2023
0 days left
EMD
11300
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ayodhya → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Modification Of Old And Small Oven ( Heating Chamber ) By Dismantling To 24 Kw Oven ( Heating Chamber ) With Double Decker Trolley At Electricity Transformer Repairing Workshop Sultanpur And Sohawal Under Ewd-Ayodhya
BOQ
| Sl. No. | Item Description |
| 1 | Carriage of Old 10 KW heating chamber (Oven) from Lucknow to Sultanpur Workshop |
| 2 | Carriage of Old 10 KW heating chamber (Oven) from Lucknow to Sohawal Workshop |
| 3 | Cutting and dismantling of small and old 10kw heating chamber of different sizes |
| 4 | Fabrication of 24 KW heating chamber with proper commissioning , alignment, fixing, welding of outer size 8\"X8\"X8\" jointing by modification of old heating chamber |
| 5 | Modification of inner chamber by providing of 02 no. air ventilation system, 03 no. air duct(01 no. on back side and 02 nos. on both side) for recirculation of air uniformly in the inner chamber. Heating arrangement on back side with safety cover. |
| 6 | Providing of new Crompton make 3 HP 1440 RPM motor ( 01 no.) is fitted in back side with bush and coupling direct drive system attached to uniform the temp. all over in the heating chamber. |
| 7 | Modification of inner chamber with proper sealing to avoid heat loss, denting and painting of inner chamber and providing required glass wool with proper sealing to avoid heat loss with heat resistant Aluminium paint and outer chamber will be painted with silver hammer tone paint |
| 8 | Balancing of straight front door with locking arrangement and providing of new door gasket, fitted on front door. |
| 9 | Providing of heating element stainless steel tubular type ISI mark fitted at back side with safety cover in the heating chamber. |
| 10 | Providing and fixing of Control Panel for 24 KW oven: Control Panel will be complete with one separate floor mounted control panel is necessary components as mentioned below and wired with ferrules as per relevant ISI standard .It will be fitted with:• One ISO-9001-2015 certified Microprocesor based Digital Temperature Indicator cum Controller (Reputed Make) with Temperature range from above ambient to 150° C. • One Analogue Hydraulic Capillary type Thermostat (Reputed Make • One Volt/ AMP/Frequency meter/ Digital type• Three current transformer Ratio 100/5 A CT Operated• Three Magnetic Air Break contactor (L&T Make )• One Selector button switch for blower (reputed make)• One K- Type Sensor• One rotary ON-OFF switch• One ICTP Switch fuse unit• Three indicating lamps showing\" LINE\" • One indicating lamps showing\" \"LOAD\"• 03 Nos. MCB & 03 nos. pilot lamp suitable for heater. . All housed in an elegant sheet metal cabinet well ventilated and nicely painted. |
| 11 | Providing of new electric circuit heat proof glass coated wire of different guages as required in heating chamber. |
| 12 | Installationand Commissioning charges |
| 13 | Fabrication & Erection of Double Decker Trolley (Size of Trolley) i.) Length:(2235 mm) ii.) Width :( 2235mm)iii.) Height:( 750 mm ) Heating Chamber is provided with the double Decker trolley in to two floor lower & upper.• The Trolley will be supplied having Double Decker System with the provision of Four side M.S Pillar as the leg & frame height 750 mm . The Trolley will be out of suitable size of M.S Channel of 100 x 50 x 6 mm fix in the trolley as the top of the plate form with double support mounted of 4 mm thick sheet with welding & smooth finish for a load of 3 MT capacity. Suitable design MS Plate supported by 2 pairs of wheels with bearing on each trolley, moving on track .supports laid in the bottom floor with extension on door side for full discharge . The rail track will be made of MS Bar 04 nos. of size 50 x 50 with 18 ft. long.• The complete trolley will be painted with two coats of Red –oxide primer and then with two coats of heat resistive Aluminum Paint outside ISI Mark as per relevant both inside & outside .All Mild steel materials shall be of quality as per relevant ISS. |
AI Tender Summary
Tender Timeline
Sep 30, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 10, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender