Orissa Tourism Development Corporation Limited has published Tender For Renovation Of Panthanivas Barkul In Khordha Dist.. Submission Date for this Tender is 16-10-2023. Civil Work Tenders in khordha Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Renovation of Room |
| 2 | Dismantling brick or stone masonry in cly under 3m height including stacking the useful materials for reuse and removing the debris within 50m lead. |
| 3 | Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead. |
| 4 | Dismantling and removing old tiled cladding from walls including racking out joints 12mm deep and stacking the useful materials for reuse and removing the debris within 50m lead. |
| 5 | Removing old lime or cement plaster from walls including raking out joints 12mm deep and removing the debris within 50m lead. |
| 6 | Dismantling and removing cement concrete including stacking the useful materials for reuse and removing the debris within 50m lead. |
| 7 | Dismantling & removing doors,window & ventilatots including removal of frame ,hinges ,fastening & stacking the same for reuse & removing the debris within 50m lead. |
| 8 | Providing Fly Ash Brick masonry using fly ash bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix(1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar in foundation, plinth, basement and for ornamental flower beds, plinth moulding and similar such type of works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as per specification and direction of Engineer-in-charge. |
| 9 | Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:4) finished smooth to inside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge. |
| 10 | Providing & Fixing tiles 30cm x 30cmspecial plain / printed series ceramic floor tiles (Base price of the tile not less thanRs. 35 / sqft) having thickness 7mm to 8mm confirming to IS 13755 of approved makeof Somany/ Kajaria in floors treads or stepsand landing on 20mm thick bed of cement mortar 1:4 (1cement : 4sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing. work complete in all respect as per specification and direction of Engineer-in-charge.(in toilet floor area) |
| 11 | Providing & Fixing tiles of 30cm x 45 cm / 30 x 60cm /special plain/ printed series ceramic wall tiles of premium grade (Base price of the tile not less thanRs. 35 / sqft) having thickness 6.5mm to 6.7mm confirming to IS 13755 of approved makeof Somany/ Kajaria/Johnsonor equivalent in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and cleaning .work complete in all respect as per specification and direction of Engineer-in-charge. (in toilet walls) |
| 12 | Scraping old paint with scrapers, sand papering and washing with soap water or soda including scaffolding charges upto 5M height |
| 13 | Finishingsurfaces of walls with Cement based wall Putty (Water based) of approved make & finished smoothand even surfaceto receive painting including cost of scaffolding staging charges with cost of all materialstaxes , labour T &P etc complete. |
| 14 | Painting two coats to the wall surface by using 100% premium Acrylic emulsion paint of approved make like NEROLAC ALLS CAPES 24 carrot emulsion/ BERGER luxel luxury silk emulsion / ASIAN Royal / ICI velvetouch or equivalent make of approved shade to interior wall surface over a coat of primer with water bond cement primer after preparing the surface smooth by applying putty punning with Synthetic Acrylic wall putty including finishing the surface smooth by sand paperingin all heights including scaffolding charges with cost, conveyance, taxes of all materials, cost of all labours, etc. as required for the work complete in all respect. |
| 15 | Wall painting two coats with 100% Acrylic emulsion paint (1st quality) exterior grade (weather coat) of approved make & shade manufactured by reputed manufacture like NEROLAC /ASIAN /BERGER /DULOX or equivalent to make an even finished surface over a coat of primer with water bond cement primer in all heights with all scaffolding and staging charges including cost, conveyance of all materials, cost of all labour, etc. complete as per specification and direction of Engineer-in-Charge. |
| 16 | Supplying all materials, labours, T&P and fitting and fixing of the following size of CPVC pipeconfirming to IS 15778 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge. |
| 17 | a) 15mm dia |
| 18 | b) 20mm dia |
| 19 | c) 25mm dia |
| 20 | d) 32mm dia |
| 21 | e) 40mm dia |
| 22 | f) 50mm dia |
| 23 | Providing and fixing in position WPC frames of size 125mmx50mm to doorsfixed with MS hold fast of 35x5mm embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete with all materials, labours, T & P including cost, conveyance, loading, sundries required for the work etc. complete in all respect as directed by the Engineer-in-charge. |
| 24 | Providing and fixing of35mm thickWPC Door Shutter(Solid) with teak edge with mica pasted both side leaping to the periphery of the shutter with pilishing as per detailed drawing with including, all hardwares & fixtures, SS tower bolt(150mm),Door stopper,SS aldrop(250mm),SS handle(200mm length),ss handle (150mm length) & SS Butt hinges -125mm x 65mm x2.12mm .including cost, conveyance, loading, T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge. |
| 25 | Providing & fixing factory made uPVC white colour sliding glazed window three track three panels sliding window wiyh fly proof SS wire mesh(two nos.glazed & one no. wire mesh panels) made of small series frame 92x44mm sash 32x60mm both having wall thickness of 1.9(+,-)0.2mm & single glazing bead of appropriate dimension etc complete as per direction of EIC. |
| 26 | Providing 16 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with portland slag cement (PSC) finished smooth to inside rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and ,es of all materials and cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge. |
| 27 | UGR |
| 28 | Earthwork in excavation in all kinds of soil upto 1.50mtr depth of foundation trenches for columns, basement, tie beams, walls and steps in following types of soil including moorum, hard stony earth, earth mixed with boulders, DI rocks etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge. |
| 29 | Supplying and filling in foundation trenches and plinth, ditches with sand well-watered and rammed in layers not exceeding 23 cm. in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. (Measurement will be taken on finished compacted section only). |
| 30 | Providing and lying plain cement concrete of proportion (1:3:6) in foundation and floorsusing Portland Slag Cement(PSC) with 4 cm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification anddirection of Engineer-in-charge. |
| 31 | Providing, lifting, hoisting and laying Reinforced cement concrete of following different RCC structure ofM-200 grade as per approved designs and drawings having a minimum compressive strength (in work test) 200 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed andcleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portlandslag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. |
| 32 | A)Raft/Foundation |
| 33 | B) Wall |
| 34 | C) Roof Beam |
| 35 | D) Roof Slab |
| 36 | Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:4) finished smooth to inside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge. |
| 37 | Cleaning of Sunken RCC surface to remove dust and loosely adhering particles completely supply and applicationof 1:3 cement-sand mortar, mixed with Sika Top77- the polymer modified high quality emulsion, as a coving at the corners of floor and the vertical surface in the sunken area and between floor and walls in the remaining area. Supply and application of Sika Top Seal 107-the cementitious, flexible water proof coating onto the prepared surface in continous film on the floor of the sunken area, taking the coating over the vertical surfaces on to the floor and over the coving on to the wall(Before toilrt floor) |
| 38 | Providing Fly Ash Brick masonry using fly ash bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix(1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar in foundation, plinth, basement and for ornamental flower beds, plinth moulding and similar such type of works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as per specification and direction of Engineer-in-charge. |
| 39 | Providing Fly Ash Brick masonry using fly ash brick of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix(1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar in superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as per specification and direction of Engineer-in-charge. |
| 40 | Supplying, fitting and fixing of color coated trapezoidal sheet TRIMDEK 1015 profile sheet from TATA BLUESCOPE STEEL or any approved equivalent. The base metal sheet of 0.45mm thick. High Tensile steel with minimum 550MPa yield strength, metallic hot dip coated with aluminum zinc alloy of 55% aluminum 45% Zinc as per AS 1397 – Zincalume® AZ 150 (minimum 150grams as per square meters, total on both sides) with COLORBOND® - Polyester Based quality Paint conforming to AS/NZS 2728 class 3. The paint shall have a total coating thickness of nominal 35 micron (Nominal 20micron exterior coat on top surface and nominal primer coat) on both surfaces with approved color shade etc. complete. Accessories – Fasteners: The steel sheet shall be fastened with min.40Pm zinc coated or min 20Pm Zinc-Tin alloy coated, Hex head, self-drilling screw as per AS 3566 class 3 fasteners of approved make (Buildex of equivalent) with EPDM washer on each crest of sheet for connecting with purlin (or as per design) perpendicular to the sheeting and in the center of the corrugation of rib including cost of all materials, labour sundries, T & P and transportation complete in all respect as per design and drawing as directed by the Engineer-in- charge. |
| 41 | Supplying and laying of heavy duty factory made hydraulically pressed and mechanically compacted free cast interlocking TUFF STONE brand pavers of 80mm thick, coral shaped preparation of sub base with 60mm sand and leveling,laying of interlocking paver block with sand binding and final compaction with plate vibrator finishing the surface including cutting of blocks at the edges with all labour and materials etc complete as per direction of Engineer-in-chrge. |
| 42 | Supplying, fitting and fixing of M.S grills, grill gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railing ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damagedwalls/ structures with cement concrete (1:2:4)with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including cost, conveyance, loading /unloading, royaltiesof all materials ,all labour cost , sundries, T & P etc. complete as per the direction of the E.I.C . |
| 43 | Providing, fixing and placing ofTor steel (HYSD) Fe-500 of SAIL/ TATA/RINL/JINDAL/SHYAM STEEL for RCC work in all floors of required diameter of approved quality with straightening, Cutting, bending, bindingwelding or jointing if necessary, bending, binding, tying the grills as required for R.C.C. works, providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T & P and scaffolding complete in all respect as directed by the Engineer-in-Chargecomplete |
| 44 | Wall painting two coats with 100% Acrylic emulsion paint (1st quality) exterior grade (weather coat) of approved make & shade manufactured by reputed manufacture like NEROLAC /ASIAN /BERGER /DULOX or equivalent to make an even finished surface over a coat of primer with water bond cement primer in all heights with all scaffolding and staging charges including cost, conveyance of all materials, cost of all labour, etc. complete as per specification and direction of Engineer-in-Charge. |
| 45 | Providing and laying Plain cement concrete of proportion (1:2:4) in foundation and floors using 12 mm. Size black hard crusher broken granite stone Chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per the instruction of the Engineer-in-Charge.a)Ground floor |
| 46 | b) First floor |
| 47 | Painting two coats of synthetic enamel paint over Iron Works as per approved shade of approved quality over one coat of primer, sand papering, polishing the surface including cost, conveyance of all materials, labour, T&P, scaffolding etc. as required for the work complete as per direction of Engineer-in-charge. (The paints and primer are to be approved before procurement and use) |
| 48 | Disposal of excess earth by mechanical means / manually including cost of loading, unloading, transporting & spreading to a level surface complete in all respects including cost of all labour, tools & plant etc. to complete the work |
| 49 | Swerage Line |
| 50 | Earthwork in excavation in all kinds of soil upto 1.50mtr depth of foundation trenches for columns, basement, tie beams, walls and steps in following types of soil including moorum, hard stony earth, earth mixed with boulders, DI rocks etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge. |
| 51 | Supplying all materials, labour, T&P, fitting and fixing UPVC SWR pipes & fittings of approved make confirming to ISI type-A, both below and above ground level / floor and on walls including supply of bobbins, nains, screws, wooden cleats, pipe clips as per requirement, including earth work in excavation and fitting, including cuting walls and floor and making good the damages with cement concrete (1:2:4) with hard granite chips, incluidng scaffolding wherever necessary all complete as per the PH specification and direction of the Engineer-in-charge. |
| 52 | a) 160mm dia |
| 53 | b) 100mm dia |
| 54 | c) 75mm dia |
| 55 | Providing and laying in trench cement concrete ( 1:3:6 ) with 40mm size hard granite metal in the following type of bedding for 160mm pvc pipes of the following internal diameter including curing complete as per specification. |
| 56 | Providing & Constructing manhole chamber of following sizes including earth work in excavation, back filling,KBBrick masonary work four sides to make chamber, Plain Cement Concrete (1:2:4)30cm depth in bottom of chamber with 1/2" down graded Crusher broken hard granite chips, inside cement plaster 12mm thick in CM 1:3& neat cement punning , Top slab in RCC ( 1:2:4) 15cm thick with necessary centering & shuttering, TMT steel reinforcement @10 cm c/c both way, cast iron manhole cover with frame, making channel in floor of chamber with necessary slope complete with all materials, labour, tools, plant, royalty, curing, etc. in all respects as per the direction of Engineer-in-charge. |
| 57 | a) Plain manhole inside 900x800and 450mm deep with cast iron manhole and frame(light duty) rectangular type 450mmx610mm internal dimension. |
| 58 | b) Plain manhole inside 1200x900and 450mm deep with cast iron manhole and frame(mediumduty) circular 560mm internal dia , wt of cover and frame to be not less than 128kg. |
| 59 | Supplying all materials,labours,T&P and constructing gully trap chamber of 250mmx 250mm inside size with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size hg chips,foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plaster in cement mortar (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mm x150mm size CI grating etc all complete as per approved drawing,specification and direction of Engineer-in-charge. |
| 60 | Cleaning of septic tank by SespoolSewer Suction machine etc. completed. |
| 61 | Electrical works |
| 62 | Supply, installation, testing & commissioning of electrical motor driven main pump of horizontal centrifugal end suction backpull out type with gland packing and capable to deliver 1620 LPM at 56 MT, HEAD with speeed of 2900 RPM the set shall mounted on common base frame of approved make etc complete with all materials, labour &transportation as required as per the direction of Engineer-in-Charge. (KSB/CROMPTION/KIRLOSKAR) |
| 63 | Supply, installation, testing & commissioning ofelectrical motor driven Jockeyy pump of horizontal centrifugal end suction back pull out type with gland packing andcapable to deliver 180LPM at 56 MWC, with speed of 2900RPM the set shall mounted on common base frame of approved make etc complete with all materials, labour &transportation as required as per the direction of Engineer-in-Charge.(KSB/ CROMPTION) |
| 64 | Supply, installation, testing & commissioning of Disel driven pump of horizontal centrifugal end suction backpull out type with gland packing and capable to deliver 1620LPM at 56 MT, HEAD with speed of 2900 RPM the set shall mounted on common base frame of approved make etc complete with all materials, labour &transportation as required as per the direction of Engineer-in-Charge. (KSB/ CROMPTION) |
| 65 | Control Panel for Fire pumps : Fabricating & Supply installtion testing and commissioning of compartmentalised common control panel for Electrical motor driven pumps Diesel engine driven pumps & Terrace pump of approved make etc complete with all materials, labour &transportation as required as per the direction of Engineer-in-Charge. |
| 66 | 1100 V GRADE POWER/ CONTROL CABLES : SITC of FRLS steel armoured aluminium, 1100v Grade power cables with glands of approved make etc complete with all materials, labour &transportation as required as per the direction of Engineer-in-Charge.(Havells/ POLYCAB/KEI) |
| 67 | PUMPING SYSTEM |
| 68 | Supply, installation, testing and commissioning of GI Pipeconforming to IS:1239 of approved make etc complete with all materials, labour &transportation as required as per the direction of Engineer-in-Charge. Make Jindal. |
| 69 | a) 200 mm nominal dia |
| 70 | b) 150 mm nominal dia |
| 71 | c) 80 mm nominal dia |
| 72 | d) 25 mm dia |
| 73 | Supply, installation, testing & commissioning ofC.I Non-return valves as per IS IS:5312 with required flangers, nuts bolts and gaskets (PN-1.6)-ISI.(Kartar) of approved make etc complete with all materials, labour &transportation as required as per the direction of Engineer-in-Charge. |
| 74 | a) 150 mm nominal dia |
| 75 | b) 80 mm nominal dia |
| 76 | Supply, installation, testing & commissioning ofCI Sluice valves as per BS 5155 (PN 16) slim seal standared lever operated type with required flangers, nuts, bolts ISI (Kartar) of approved make etc complete with all materials, labour &transportation as required as per the direction of Engineer-in-Charge. |
| 77 | 150mm nominal dia |
| 78 | 80mm nominal dia |
| 79 | Supply, installation, testing & commissioning ofC.I flanged foot valve with suitable flangers, nuts, bolts, gaskets ISI (Kartar) of approved make etc complete with all materials, labour &transportation as required as per the direction of Engineer-in-Charge. |
| 80 | 150mm dia |
| 81 | 80mm dia |
| 82 | Supply, installation, testing & commissioning of Priming Arrangement for above pump of approved make etc complete with all materials, labour &transportation as required as per the direction of Engineer-in-Charge. |
| 83 | Supply, installation, testing & commissioning of of Pressure switches of suitable range for pumpsets with ball valves of approved make etc complete with all materials, labour &transportation as required as per the direction of Engineer-in-Charge. |
| 84 | Supply, installation, testing & commissioning ofPressure gauges of suitable range for pumpsets with ball valves of approved make etc complete with all materials, labour &transportation as required as per the direction of Engineer-in-Charge. |
| 85 | Structural steels as requited for pump House str. Like Uclamp, Angel, Achor bolt, Not bolt washer, Ms angel etc to system complete for wet-riser system of approved make etc complete with all materials, labour &transportation as required as per the direction of Engineer-in-Charge. |
| 86 | WET RISER SYSTEM |
| 87 | Supply, installation, testing and commissioning of GI Pipeconforming to IS:1239 of approved make etc complete with all materials, labour &transportation as required as per the direction of Engineer-in-Charge. Make Jindal |
| 88 | 100mm nominal dia |
| 89 | 80mm nominal dia |
| 90 | Supply, installation, testing & commissioning of SS Single headed hydrant valve as per IS 5290.63 MM dia instanionous outlet complete with blank cap (Fireshield) of approved make etc complete with all materials, labour &transportation as required as per the direction of Engineer-in-Charge. |
| 91 | Supply, installation, testing & commissioning of15 M long, 63mm dia RRL hose with instataneuos S.S couplings and hoses shall be stored in side the hose cabinet. (Fireshield) of approved make etc complete with all materials, labour &transportation as required as per the direction of Engineer-in-Charge. |
| 92 | Supply, installation, testing & commissioning of 1 no. S.S short branch pipe with nozzle. ( Fireshield) of approved make etc complete with all materials, labour &transportation as required as per the direction of Engineer-in-Charge. |
| 93 | Supply, installation, testing & commissioning of Hose reel drum of swinging type with 19mm dia rubber braided hose of 30M. Length with gate valve and shut off nozzle complete. ( Fireshield) of approved make etc complete with all materials, labour &transportation as required as per the direction of Engineer-in-Charge. |
| 94 | Supply, installation, testing & commissioning of M.S Double Hose cabinet fabricated out of M.S. sheet with glass fronted (4mm thick glass with rubber beding) door and cabinet shall be powder coated of approved colour both inside and out side. (Fireshield) of approved make etc complete with all materials, labour &transportation as required as per the direction of Engineer-in-Charge. |
| 95 | Supply, installation, testing & commissioning of Fire brigade inlet inlet connection of 3 way with 2 nos. 63 mm dia . Built - in G.M/ss Non-return valves instantaneous coupling type arranged on 100 mm dia. (Fireshield) of approved make etc complete with all materials, labour &transportation as required as per the direction of Engineer-in-Charge. |
| 96 | Supply, installation, testing & commissioning of automatic air release valve with unions of approved make etc complete with all materials, labour &transportation as required as per the direction of Engineer-in-Charge. |
| 97 | Supply, installation, testing & commissioning of Gum metal chrome finished ball valves with fittings of screwed end type of approved make etc complete with all materials, labour &transportation as required as per the direction of Engineer-in-Charge. |
| 98 | 25mm dia |
| 99 | 100 mm sluice valve (ISI) (Kartar) |
| 100 | 100 mm Nos Return valve (ISI) (Kartar) |
| 101 | Supply, installation, testing & commissioning of Structural steels as required like U clamp, Angel, Anchor bolt, Not bolt washer, Ms angel etc to system complete for wetriser system of approved make etc complete with all materials, labour &transportation as required as per the direction of Engineer-in-Charge. |
| 102 | Supply, installation, testing & commissioning of Carbon-di-oxide Gas Type Fire Extinguisher 4.5 Kgs, squeeze Grip. Hose and wall mounting bracket etc applicable on class B&C fire. B rating 34B, ISI Approved as per IS:2878:2004 (Fireshield) of approved make etc complete with all materials, labour &transportation as required as per the direction of Engineer-in-Charge. Make - Safepro/Firestone/Safex or Equivalent |
| 103 | Supply, installation, testing & commissioning of ABC Powder 6 KG Fire Extinguisher containing Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge Fitted with discharge hose, wall mounting bracket etc as per IS:15683:2006 (Fireshield) of approved make etc complete with all materials, labour &transportation as required as per the direction of Engineer-in-Charge. Make - Safepro/Firestone/Safex or Equivalent |
| 104 | Supply, installation, testing & commissioning of 8 Zone Digital Conventional Fire Alarm Control PanelThe panel shall be as per technical specification. The panel shall be UL listed & FM approved. The quoted rate shall inclusive ofBacnet/Modbus interface for fire alarm panel with complete accessories of approved make etc complete with all materials, labour &transportation as required as per the direction of Engineer-in-Charge.Make-Agni or Equivalent |
| 105 | Supply, installation, testing & commissioning of Conventional Smoke Detector of approved make etc complete with all materials, labour &transportation as required as per the direction of Engineer-in-Charge. Make-Agni or Equivalent |
| 106 | Supply, installation, testing & commissioning of Break glass typeManual call point of approved make etc complete with all materials, labour &transportation as required as per the direction of Engineer-in-Charge. Make Agni or Equivalent |
| 107 | Supply, installation, testing & commissioning of Hooter of approved make etc complete with all materials, labour &transportation as required as per the direction of Engineer-in-Charge. Make Agni or Equivalent |
| 108 | Supply & Laying of 1.5 sq. mm, Armoured Pair PVC insulated FRLS wire with necessary conduit &Accessories confirming to IS standards of approved make etc complete with all materials, labour &transportation as required as per the direction of Engineer-in-Charge.Make-Polycab/Finolex/Havells |
| 109 | Providing of Labour Charges to complete Alarm System etc complete as required as per the direction of Engineer-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
