Tender For Supply, Laying, Erection, Commissioning & Testing Of 185 Mm 3.5 Core Pvc Underground Cable From Ncc To Main Gate (Back Side) Along The Road Electric Line Is Existing At Rajuvas, Bikaner Providing & Laying P.V.C./ XLPE insulated & P.V.C. sheathed Arrmoured Aluminium cable confirming to IS:1554 P-1/IS:7098 P-1 of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round flat strip armouring of cables, Inner/outer sheath confirming to IS:5831 in existing RCC/Hume / Stoneware/ PVC pipe open duct/cable trench/Cable tray(with cable tie) including testing etc. as required of following size. OEM must have its own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product/work refer Annexure A attached with this BSR. 185.0 Sq. mm 3.5 core Make Providing & Laying P.V.C./ XLPE insulated & P.V.C. sheathed Armoured Aluminium cable confirming to IS:1554 P-1/IS:7098) P-1 of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner/outer sheath confirming to IS:5831 in existing RCC/Hume / Stoneware / PVC pipe/ open duct cable trench/Cable tray(with cable tie) including testing etc. as required of following size. OEM must have its own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure A attached with this BSR.50.0 Sq. mm 3.5 core Make Providing & Laying P.V.C./ XLPE insulated & P.V.C. sheathed Arrmoured Aluminium cable confirming to IS:1554 P-I/IS:7098 P-1 of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round flat strip armouring of cables, Inner / outer sheath confirming to IS:5831 in existing RCC/Hume / Stoneware / PVC pipe open duct/cable trench/Cable tray(with cable tie) including testing etc. as required of following size, OEM must have its own in house NABL accrediated Laboratory for testing procedure as per 15:10810.Fom additional technical parameters of product/ work refer Annexure A attached with this BSR.35.0 Sq. mm 3.5 core Make Providing & Laying P.V.C./ XLPE insulated & P.V.C. sheathed Armoured Aluminium cable confirming to IS:1554 P-1/IS:7098 P-I of 1.1 KV with H4- Grade electrolytic aluminium conductor. confirming to IS 8130 of purity >99.6 %, round flat strip armouring of cables, Inner/outer sheath confirming to IS:5831 in existing RCC/Hume / Stoneware / PVC pipe open duct/cable trench/Cable tray(with cable tie) including testing etc. as required of following size. OEM must have its own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure A attached with this BSR.16.0 Sq. mm 3.5 core Make- Add Extra for Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade direct in ground including excavation of trench of size 75 cm (Depth) x 35 cm(Width), with procedure as per following points (a) Make a river sand bed of height 125 mm along the trench, (b) Lay the cable in the middle of the trench, (c) Provide river sand bed of height 125 mm on top of the cable, (d) Lay the protective Common burnt clay F.P.S. Bricks of Class designation 75/ Sand stone slabs of 50 mm thickness and 225 mm wide just above the sand bed vertically across the cable (Approx. 9 no. Bricks per Mtr.), (e) Backfill the excavated soil leaving 300 mm from the Ground level, (O)Lay the Cable warning tape and again back-fill the remaining portion of the trench upto the ground level and compacting the earth. Add Extra for Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade direct in ground in the same trench in one tier horizontal formation including excavation of trench of size additional 20 cm in width, with procedure as per following points (a) Make a river sand bed of height 125 mm along the trench, (b) Lay another cable in middle of trench in such manner that spacing between another cable is 20 cm., (c) Provide river sand bed of height 125 mm on top of the cable. (d) Lay the protective Common burnt clay F.P.S. Bricks of Class designation 75/Sand stone slabs of 50 mm thickness and 225 mm wide just above the sand bed vertically across the cable (Approx. 9 no. Bricks per Mtr.), (e) Backfill the excavated soil leaving 300 mm from the Ground level, (f)Lay the Cable waming tape and again back-fill the remaining portion of the trench upto the ground level and compacting the earth SITC of IP-42 and general construction confirming to IS:8623: 1993, wall free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and Other parameters required as per point (a) (b), (c)(d), (e), (f), (g). (b) as below:- Thickness of CRCA sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with/without detachable extension type structure. Removable 3 mm thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided Tests: The insulation resistance (with 1000 V Megger) and High voltage Power frequency test (by applying a voltage of 2.5KV for one minute) shall be measured between phases, between phase and neutral and between phase and earth. both before and after high voltage power frequency test. The insulation resistance shall not be less than three megaohm. CT Secondary current injection test shall also be carried out only outer surface area on all sides shall be measured & panel to be fabricated only from CPRI approved fabricator only (CPRI Test certificates to be submitted)All as per pre approved by Engineer in charge. For additional technical parameters of products/work, refer Annexure A attached with this BSR Supply and erection of Galvanized Iron pole with galvanizing done in single dipping (Average coating thickness Minimum 65 Microns) continuously tapered poles having Octagonal Circular cross-sections designed to withstand the maximum wind speed as per IS 875, The pole shaft shall be made from sheet steel (HT Steel Conforming to grade $35530) and confirming to BSEN 10025 and shall be continuously tapered with single longitudinal welding There shall not be any circumferential welding. The welding of pole shaft shall be done by Submerged Arc Welding (SAW) process, pole shafts shall be provided with the rigid flange plate of suitable thickness (Fe 410 conforming to IS 226 / IS 2062) with provision for fixing 4 no. foundation bolts, This base plate shall be fillet welded to the pole shaft at two locations i.e. from inside and outside. The octagonal Poles shall have lockable door of approximate 500 mm length at the elevation of 500 mm from the Base plate with bakelite sheet having 6A SP MCB and 16 sqmm stud type connector ( 4 nos) inside the pole at door opening for cable connection of following length and dimension as per table P 01 with base plate and foundation bolt on the Existing cement concrete foundation.All as per pre approved by Engineer in charge. For additional technical parameters of products/work, refer Annexure A attached with this BSR. Poles with Octagonal Cross Section 5 Mtr. Providing and Laying RCC Foundation for Octagonal Conical Street Light poles, High mast Poles as per Drawing attach at Table P-4 with Following Procedure & All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR. Excavation of Pit for Foundation Size upto required depth from Ground level Dressing of Pit and Dry stone pitching 200 mm thick including supply of stones and preparing surface complete Providing and Laying Reinforce cement Concrete of M-25 grade in Footing and Pedestal including Curing the foundation for 7 days Providing and Fixing Nosing Angle 40 mm x 40 mm x 6mm with 2 no. 100 mm long, 10 mm dia. Lugs on each face. Pole Foundation for Octagonal pole from 3 Mtr. To 6 Mtr. Supplying and fixing of Aluminium (IEC 60105 ISO 209-1,2)/ Copper (IEC 60028) bus bar by means of SMC DMC type insulator with standard short circuit withstand capacity high tensile nuts and bolts spring washers in existing panel including bending, cutting in required shape and size and colour coding with heat shrinkable PVC sleeves. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work refer Annexure A attached with this BSR. Electrolytic grade Aluminium bus bar 6010 grade Providing & Fixing of ISO certified company made bus bar chamber housed in sheet metal box as per PWD specification for electrical Works Confirming to IEC-60439/ IS-8623 & IEC-60529/ IS-2147 made out from 1.6 mm thick powder coated CRCA sheet degree of protection IP-31 front openable bus bar made out of aluminium or wrought aluminium alloy suitable for 200 amp. Capacity, bus bar fixed on porcelain/DMC insulators at approved spacing including making connections etc. as required. Appropriate type test certificate / OEM test report shall be submitted. All as per pee approved by Engineer in charge. For additional technical parameters of products work, refer Annexure A attached with this BSR. 300 mm long, 4 strip Providing & Fixing of ISO certified company made bus bar chamber housed in sheet metal box as per PWD specification for electrical Works Confirming to IEC-60439/ IS-8623 & IEC-60529/ IS-2147 made out from 1.6 mm thick powder coated CRCA sheet, degree of protection IP-31 front openable bus bar made out of aluminium or wrought aluminium alloy suitable for 200 amp Capacity, bus bar fixed on porcelain/DMC insulators at approved spacing including making connections etc. as required. Appropriate type test certificate / OEM test report shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR.450 mm long, 4 strip Supply and Fixing of Pole OEM fabricated hot dipped galvanised M.S. Overhang (48.3 X 3.25 mm) with cap (400 x 88.9/114.3 x 3.25 mm) over the existing poles. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR Double arm overhang Brick work with F.P.S. bricks of class designation 100 in superstructure above plinth level upto floor V level in all shapes and sizes in: Cement mortar 1:6 (1 cement: 6 coarse sand) Supplying and making end termination with heavy aluminium lugs (Pin/ring type) confirming to IS 8309-1993 & IS 8337- 1976 duly crimped with crimping tool, PVC tape etc of following size.All as per pre approved by Engineer in charge. For additional technical parameters of products/work, Annexure A attached with this BSR. 185.0 Sqmm Add extra in item no. 11.1 to 11.4 for Laying Charges for cable through Manual Boggi by making pit at regular interval and repairing the pit after laying of cable with PCC/ Bitumin as required. P&F rigid PVC Pipe (IS:4985 mark) class II (4 Kg /Cm2 approved quality make including joining the pipe with solvent cement rubber ring and lubricant. 63 mm dia S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P-III) PVC conduit along with ISI marked (IS:3419- 1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure A attached with this BSR. 25 mm Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130: 2013 of 1.1 RV grade Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss, oxygen free for less chances of oxidization, insulation PVC type A/C/D, flame retardant as per IS 10810-53, better amperage rating as per 15:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires For additional technical parameters of product work refer Annexure A attached with this BSR. 1 x1.5 sq.mm Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996)/conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum, energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm.. conductor line load reversibility. IP 20 contact protection and fitted in existing distribution boardsheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc, as required. OEM shall have submit NABL/CPRI/ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product/ work refer Annexure A attached with this BSR. Double pole MCB(With B/C curve tripping Characteristics). 40 A rating Make Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996)/conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum, energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq mm.. conductor line load reversibility, IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL/CPRI ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product/work refer Annexure A attached with this BSR.Four pole MCB (With B/C curve tripping Characteristics) 40 A rating Make Labour charges for Dismantling of following existing street light electric poles with street light fixtures, underground cable, MS box and other electric items of the pole coming along the alignment of the road and removal and re- rolling MS poles/PCC poles of different sizes as well as handing over the same to DISCOM/UIT/MC store and as per the direction of Engineer Incharge and clean the site good as per the requirement and submit the receipt from concering authority, all complete works Providing & Fixing of IK08, IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with UV stabilized PC (UV stablization report submitted for UV cover) Toughened Glass cover and secondary lens on each LED & should be SMD type of 3 to 5 watt each. The System efficacy >125 lm/ wt and potted driver & has a unique BIS R number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @-300 V AC and Auto resetting Safety Power Factor >0.95 driver Efficiency >85% THD (I) <10% Humidity 10% to 90% RH Working Temp -5C to 45C. driver current <750mA. The luminaire shall be BIS certified and Trade mark certified. Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% lumen maintened, CRI >70 and CCT 5700K +355K. Surge protection shall be min ≥ 4 KV internal and min 10 KV external inside driver compartment. driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR. LED Street Light fixture with Minimum lumen output 7500 LM
