|
| 1 | Task Name:- B- 3.2 Material ,Task Name-: B- 3.2 MaterialMaterial Supplied byMPMKVVCL |
| 2 | 11 KV VCB, Outdoor Porcelain clad type with complete structure and accessories excluding CT & pannel |
| 3 | 11 KV.C.Ts.(Outdoor dry type) 300-150/5-5 Amps |
| 4 | 11 KV control & relay panel with numerical static relay for double feeder protection |
| 5 | 11 KV, ISOLATOR 800 AMP.(Turn and twist type) |
| 6 | 9 KV Gapless type Metal oxide (10 KA) Polymer for 33/11 kv S/s type |
| 7 | 11 KV Single Phase PTs. (Resin Molded) |
| 8 | 3 phase 4 wire 3x63.5 volts lb=5 amps Imax = 10 amp, HT trivector meter class of accuracy 0.5s, DLMS Compliant category A Meters along with GSM (GPRS compatible ) modems (For substation metering) |
| 9 | H-Beams 152 X 152 mm., 37.1 Kg./Mtr.-9 mtr. Long= 333.9 kg |
| 10 | 11 KV Pin Insulator Polymer Composit (5 KN) |
| 11 | 33 KV (45KN) Composite Polymer Disc Insulators |
| 12 | 33 KV composite polymer Strain set with hard ware suitable for Panther Conductor |
| 13 | Copper Control Cable 4 Core. 2.5 Sq.mm. (Unarmoured) |
| 14 | Copper Control Cable 12 Core. 2.5 Sq.mm. (Unarmoured) |
| 15 | ACSR Panther conductor 0.20 sq. inch (200 sq.mm Al.Eq.) |
| 16 | Copper Control Cable 8 Core. 2.5 Sq.mm. (Unarmoured) |
| 17 | Copper Control Cable 2 Core. 2.5 Sq.mm. (Unarmoured) |
| 18 | Task Name:- B- 3.2 Material ,Task Name-: B- 3.2 MaterialMaterial Supplied byContractor |
| 19 | Marshelling box with 10 no. connectors |
| 20 | SHEET METAL METER BOX SUITABLE FOR H.T. STATIC TRAVECTOR METERS WITH TTB |
| 21 | T CLAMP FOR 33KV & 11KV BUS, SUBSTATION upto DOG |
| 22 | Stringing of Each 11 KV Bus-upper and lower bus including, drop jumpering and jointing with clamps,through outgoing VCB/ ME/ DP, upto station transformer |
| 23 | Stone Block/Pre cast block for base pedding(450X450X75MM) |
| 24 | Concreting of structures & foundation (1:3:6) |
| 25 | Concreting of foundation of VCB (1:3:6) @ 3.5 cmt per VCB plinth |
| 26 | Erection of Plinth per VCB- 33KV or 11KV |
| 27 | M.S.Nuts with Bolts |
| 28 | Red oxide paint |
| 29 | Aluminium paint |
| 30 | Danger Boards Enamelled 33 KV |
| 31 | G.I. STRIP 25X3 MM1 |
| 32 | G.I.Pipe 40 mm Dia C grade type |
| 33 | Bentonite compound powder |
| 34 | Galvanized nut & bolt with washer |
| 35 | Task Name:- C- 1.2 Material ,Task Name-: C- 1.2 MaterialMaterial Supplied byMPMKVVCL |
| 36 | 140 Kg.,8.0 Mtrs. long PCC pole |
| 37 | 11 KV Pin Insulator Polymer Composit (5 KN) |
| 38 | AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.) |
| 39 | Task Name:-C- 1.2 Material ,Task Name-: C- 1.2 MaterialMaterial Supplied byContractor |
| 40 | Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire |
| 41 | Jointing Sleeves suitable for Rabbit (55Sq.mm.Al. Eq. ) AAAC conductor |
| 42 | Stay set complete without Stay wire 16 mm. (Painted) |
| 43 | STAY WIRE 7/3.15 MM.(7/10 SWG) |
| 44 | Stay Insulators 90X65mm |
| 45 | Back filling of poles with boulders. |
| 46 | G.I. WIRES 4.0 MM. (8 SWG) |
| 47 | Stone Block/Pre cast block for base pedding(450X450X75MM) |
| 48 | Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay |
| 49 | Red oxide paint |
| 50 | Aluminium paint |
| 51 | Danger Boards Enamelled 11 KV |
| 52 | Aluminium Binding wire and tape |
| 53 | M.S.Nuts with Bolts |
| 54 | Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) |
| 55 | Task Name:-C- 7.2 Material ,Task Name-: C- 7.2 MaterialMaterial Supplied byMPMKVVCL |
| 56 | 140 Kg.,8.0 Mtrs. long PCC pole |
| 57 | 11 KV Pin Insulator Polymer Composit (5 KN) |
| 58 | 11 KV(45KN) Composite Polymer Disc Insulators |
| 59 | 11 KV Strain hardware (T&C type) fittings |
| 60 | Task Name:- C- 7.2 Material ,Task Name-: C- 7.2 MaterialMaterial Supplied byContractor |
| 61 | Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire |
| 62 | Stay set 20 mm. complete without Stay wire (Painted) |
| 63 | STAY GI WIRE 7/4.00 MM.(7/8 SWG) |
| 64 | Stone Block/Pre cast block for base pedding(450X450X75MM) |
| 65 | Back filling of poles with boulders. |
| 66 | Concreting of structures & foundation (1:3:6) |
| 67 | Red oxide paint |
| 68 | Aluminium paint |
| 69 | M.S.Nuts with Bolts |
| 70 | Danger Boards Enamelled 33 KV |
| 71 | Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) |
| 72 | Task Name:- C- 7.2 Material ,Task Name-: C- 7.2 MaterialMaterial Supplied byMPMKVVCL |
| 73 | 140 Kg.,8.0 Mtrs. long PCC pole |
| 74 | 11 KV(45KN) Composite Polymer Disc Insulators |
| 75 | 11 KV Strain hardware (T&C type) fittings |
| 76 | 11 KV Pin Insulator Polymer Composit (5 KN) |
| 77 | Task Name:- C- 7.2 Material ,Task Name-: C- 7.2 MaterialMaterial Supplied byContractor |
| 78 | Stay set complete without Stay wire 16 mm. (Painted) |
| 79 | STAY WIRE 7/3.15 MM.(7/10 SWG) |
| 80 | Stay Insulators 90X65mm |
| 81 | Stone Block/Pre cast block for base pedding(450X450X75MM) |
| 82 | Concreting of structures & foundation (1:3:6) |
| 83 | Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay |
| 84 | Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire |
| 85 | Earthing for PCC Pole 4.00 mm-8 SWG G.I wire- 0.8 Kg, per pole |
| 86 | Red oxide paint |
| 87 | Aluminium paint |
| 88 | Danger Boards Enamelled 11 KV |
| 89 | M.S.Nuts with Bolts |
| 90 | Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) |
| 91 | Task Name:- Fabricated MaterialMaterial Supplied byMPMKVVCL |
| 92 | D.C. Channel 100x50x6mm 4.8 mtrs center to center |
| 93 | D.C. Cross-arms 8 ft centre tocenter (100x50x6mm)Channel |
| 94 | 11 KV Cut Point Channel (100X50X6) |
| 95 | Clamp 65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg) |
| 96 | MS strain plate 65x8mm 250mm long |
| 97 | Back Clamps for H-Beam of MS Flat 65x8mm (Each weight 1.92 Kg) |
| 98 | 11 KV V cross arm 65X65X6 mm. angle type |
| 99 | 11 KV Top clamp 65X65X6 mm. angle type |
| 100 | Horizontal & Cross Bracing set of MS angle of 50X50X6 mm for 8 ft (2.4 mtr ) centre DP |
| 101 | 11 KV Guarding channel 75x40x6 mm |
| 102 | Labour Charge |
| 103 | GST |
