Tender For Area Development In Backside Of Kitchen And Laundry At Actrec, kharghar-Maharashtra

Tender For Area Development In Backside Of Kitchen And Laundry At Actrec; 1 Excavation Depth Up To 1.5Mexcavation In Foundation / Trenches / Pits Drains / Roads Etc. In All Soils Upto A Required Depth Not Exceeding 1.5 Mtrs. Including Shoring And Dewatering If Necessary And Refilling Around Foundation Plinth And Drain Line With Selected Excavation Earth In Layers Not Exceeding250mm Consolidating And Disposing Surplus Earth Out Of Hospital Premises Complete All As Directed By The Engineer-In-Charge. 2 Pcc 1:2:4 Rmc M15using 20Mm Max. Size Aggregate. Plain Cement Concrete 1:2:4 Using Graced Stone Aggregate Of 20Mm Max. Size Including Consolidation Using Vibrator & Needle If Required Finishing, Curing, Form Work Shuttering, Centering Etc. Complete All As Per Specification And In Quantity As & When Required By The Engineer-In-Charge, 3 Rcc M20rmc1:1.5:3 ( 1 Cement : 1.5 Coarse Sand ( Zone-Iii ) Derived From Naturalsources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources ) Providing And Laying In Position Specified Grade Of Reinforced Cementconcrete, Excluding The Cost Of Centering, Shuttering, Finishing Andreinforcement - All Work Up To Plinth Level 4 Form Work Centering And Shuttering Including Strutting, Propping Etc. And Removalof Form For In Quantity As & When Required By The Engineer-In-Charge, 5 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Up To Plinth Level. 6 Providing And Filling In Position Bitumen Covering Of Expansion Joint Mix Filler Of Proportion 80 Kg. Ofhot Bitumen, 1 Kg. Of Cement And 0.25 Cubic Metre Of Coarse Sand Forexpansion Joints. Complete All As Directed By The Engineer-In-Charge. ( The Compacted Thickness Of Stone Soling Laid Shall Be Measured For Payment. ) 7 225Mm Thick Soling: Providing & Laying Rubble Stone Soling Using Spotless Stones Below Floors Roads / Pavements Etc. Mechanically / Manually Consolidated Thickness 225Mm With Stones Vertically Handset Interstices Packed With Smaller Stone Chips, Binding With Murrum & Sprinkling Water For Proper Consolidating And Finishing To Required Levels In Quantities As And When Required Etc. Complete All As Directed By The Engineer-In-Charge. ( The Compacted Thickness Of Stone Soling Laid Shall Be Measured For Payment. ) 8 Brick Work: Brick Work At All Floor Level With Cement Mortar 1:4 Using Well Burnt Locally Available Bricks Of Approved Quality Including Scaffolding, Raking Out Joints Above Ground Level Simultaneous And As Directed By Engineer In Charge. In Foundation & Plinth Drain Walls Chambers & Superstructure Of All Floor Levels. 9 Plaster 20Mm Thick For Wall: Cement Plastering For Internal Wall And Ceiling With Cement Mortar 1:4 Finished Smooth With Neeru Over Brick Walls Of Concrete Surfaces Including Hacking The Concrete Surfaces At All Floors And Levels In Quantities As Required At Site Including Scaffolding Curing, Etc. Complete All As Directed By Engineer-In-Charge. 10 Chamber: Inside Size 90X80 Cm And 45 Cm Deep Including C.I. Cover With Frame ( Light Duty ) 455X610 Mm Internaldimensions, Total Weight Of Cover And Frame To Be Nostless Than 38 Kg ( Weight Of Cover 23 Kg And Weightof Frame 15 Kg ) :With Common Burnt Clay F.P.S. ( Nosn Modular ) Bricks Of Class Designation 7.5 ( Work Includes Removing Old Fixtures ) Complete All As Directed By Engineer-In-Charge. 11 455X610 Mm Rectangular Rcc Coverthe Weight Of The Cover To Be Not Less Than 23 Kg :- Providing And Fixing Rcc Chamber Cover With Frame Of Size Weight And Numbers As Specified Including Cost Of Necessary 1:2:4 Cement Concrete And 1:4 Cement Mortar For Fixing, Painting The Frame And Cover With Two Coats Of Approved Paintof Approved Shade Etc, Complete All As Directed By The Engineer-In-Charge 12 300 Mm Rcc Spun Pipe: Providing Fixing Lowering And Laying Rcc Spun Pipes Cement Pipe Or Rcc Hume Pipe ( Class Np2 Of Isi ) With Necessary Collars Jointing With Hemp Yarn And Cement1:1 Including Embedding In Walls Beams Floors Etc. Caulking The Joints Finishing Alighting To Proper Level Etc. Complete As Specified And Directed. 13 Providing And Fixing Frp Gratings Including Ms Framing Of Angel Section Of 50X50x5 ( Thickness-25Mm, Width 400Mm And Suitable Length ) In Position Over The Rain Water Drains As Directed By Eic. 14 Providing And Fixing Ms Gratings Including Ms Framing Of Angel Section Of 50X50x5 ( Thickness-25Mm, Width 400Mm And Suitable Length ) In Position Over The Rain Water Drains As Directed By Eic. 15 Structural Steel Work: At All Levels Including Supplying Cutting Fabricating Welding Or Blotting Erecting And Fixing In Position Including Painting With A Primary Coat Of Approved Steel Primer, Including Cost Of Materials Labour With Chasing In Wall Or Embedding In Floor And Making Good The Same By Filling 1:2:4 Cement Concrete And Plastering If Necessary All As Specified And Directed By Engineer-In-Charge. 16 Providing And Fixing G.I. Chain Link Fabric Fencing Of Required Width In Mesh Size 50X50 Mm Including Strengthening With 2 Mm Dia Wire Ornuts, Bolts And Washers As Required Complete As Per The Direction Of Engineer-In-Charge. Made Of G.I. Wire Of Dia. 4 Mm, Pvc Coated To Achieve Outer Dia Not Less Than 5 Mm In Required Colour And Shade All As Specified And Directed By Engineer-In-Charge. 17 Providingandfixingprecoatedgalvanisedironprofilesheets ( Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge ) 0.50 Mm ( + 0.05 % ) Total Coated Thickness With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Ofthe Sheet And Polyester Top Coat 15-18Microns. Sheet Shouldhaveprotectiveguardfilmof25micronsminimumtoavoid Scratches During Transportation And Should Be Supplied In Single Length Up To 12 Metre Or As Desired By Engineering- Charge. The Sheet Shall Be Fixed Using Self Drilling / Self Tapping Screws Of Size ( 5.5X 55 Mm ) With Epdmseal, Completeupto Any Pitch In Horizontal / Verticalor Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 18 Using Acrylic Emulsion Paints ( Plastic Paints ) Providing & Applying One / Two Coatsof Primer & Thereafter Two Coats Of Paint As Mentioned Below Of Approved Make First Quality Asian Paints To The Required Colour Scheme And As Per Manufacturers Instructions / Specificationsto The Walls, Beams, Columns, Ceilings, Partitions Doors Etc. Including Thoroughly Scrapping The Existing Surface With Sand Papers, Removing Old Paint, Filling Up Crevices And Levelling With Waterproofputty / Plaster Of Paris Of Necessary To Obtain Smooth Surface Etc. Complete Job Including Removal Of Stains, Painting Spots On Floors, Aluminium Window Frame & Glassetc Asto The Entire Satisfaction Of Engineer In Charge 19 For Metal Surface Like Staircase, Channels And Doors For The Enamel Paint Providing & Applying One / Two Coatsof Primer & Thereafter Two Coats Of Paint As Mentioned Below Of Approved Make First Quality Asian Paints To The Required Colour Scheme And As Per Manufacturers Instructions / Specificationsto The Walls, Beams, Columns, Ceilings, Partitions Doors Etc. Including Thoroughly Scrapping The Existing Surface With Sand Papers, Removing Old Paint, Filling Up Crevices And Levelling With Waterproofputty / Plaster Of Paris Of Necessary To Obtain Smooth Surface Etc. Complete Job Including Removal Of Stains, Painting Spots On Floors, Aluminium Window Frame & Glassetc Asto The Entire Satisfaction Of Engineer In Charge 20 Paver Block : Providing & Laying 60Mm Thick Factory Made Cement Concrete Interlocking Paver Block Heavy Duty Of M-30 Grade Made By Block Making Machine With Strong Vibratory Compaction And Approved Size And Design / Shape Laid In Required Colour And Pattern Over And Including 50Mm Thick Compacted Bed Of Course Sand Filling The Joints With Coarse Sand Etc., A;; Complete As Per The Direction Of Engineer-In-Charge. 21 Curb Stone: Stone Providing Fixing Curb Stone Of 300X300 Section And 200 In Width Block Heavy Duty Of M-30 Grade Made By Block Making Machine With Strong Vibratory Compaction And Approved Size And Design / Shape Laid In Required Colour And Pattern Over And Including 50Mm Thick Compacted Bed Of Course Sand Filling The Joints With Coarse Sand Etc., A;; Complete As Per The Direction Of Engineer-In-Charge. 22 Light Colour E.W.C.: Providing And Fixing White Vitreous China Pedestaltype Water Closet ( European Type W.C. Pan ) With Seatand Lid, Level White P.V.C. Flushing Cistern With Capacity As Mentioned Below, Including Flush Pipe, With Manually Controlled Device ( Handle Lever ) , Conforming To Is : 7231, With All Fittings And Fixtures Complete Including Cutting And Making Good The Walls And Floors Wherever Required. It Should Include P Or S Trap As Per Approved Make With Left Or Right Vent In Position Including Fixing It On Chair Bracket Or Wall Bracket. With Necessary C.P. Brass Screws & Plugs Etc. Make : Any Make 23 P Or S Trap: Providing & Fixing Heavy Quality Lead P Or S Trap With Union Cleaning Eye At Bottom White Solder Joints Etc. Complete As And When Required And As Directed By The Engineer-In-Charge. 24 Filling Murrum Bought From Outside: Filling Under Floors With Available Earth / Murrum / Debris Or Brought From Outside Sources Spreading In 200Mm Thick Layer, Watering Consolidating To 150Mm Thickness And Finished To Desired Levels Etc. Complete. ( 17Sqm X 0.3M Depth ) ( Disposing / Taking Away The Debris Outside The Premises & Diposing As Per The Guidelines Of Statutory Authorised.

Refer document

INR 81430.0 /-

INR 40.71 Lakhs /-

Name of Work:

Sl. No.	Item Description
1	Excavation Depth up to 1.5mExcavation in foundation / trenches / pits drains/roads etc. in all soils upto a required depth not exceeding 1.5 mtrs. Including shoring and dewatering if necessary and refilling around foundation plinth and drain line with selected excavation earth in layers Not exceeding 250mm consolidating and disposing surplus earth out of hospital premises complete all as directed by the Engineer-in-Charge.
2	PCC 1:2:4 RMC M15using 20mm max. size aggregate. Plain cement concrete 1:2:4 using graced stone aggregate of 20mm max. size including consolidation using vibrator & needle if required finishing, curing, form work shuttering, centering etc. complete all as per specification and in quantity as & when required by the Engineer-in-Charge,
3	RCC M20RMC1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level
4	FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for in quantity as & when required by the Engineer-in-Charge,
5	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level.
6	Providing and filling in position bitumen Covering of expansion joint mix filler of proportion 80 kg. of hot bitumen, 1 kg. of cement and 0.25 cubic metre of coarse sand for expansion joints. complete all as directed by the Engineer-in-Charge. (The compacted thickness of stone soling laid shall be measured for payment.)
7	225mm thick SOLING: Providing & laying rubble stone soling using spotless stones below floors roads/pavements etc. mechanically / manually consolidated thickness 225MM with stones vertically handset interstices packed with smaller stone chips, binding with murrum & sprinkling water for proper consolidating and finishing to required levels in quantities as and when required etc. complete all as directed by the Engineer-in-Charge. (The compacted thickness of stone soling laid shall be measured for payment.)
8	BRICK WORK: Brick work at all floor level with cement mortar 1:4 using well burnt locally available bricks of approved quality including scaffolding, raking out joints above ground level simultaneous and as directed by engineer in charge. In foundation & plinth drain walls chambers & superstructure of all floor levels.
9	Plaster 20mm thick for wall: Cement Plastering for internal wall and ceiling with cement mortar 1:4 finished smooth with neeru over brick walls of concrete surfaces including hacking the concrete surfaces at all floors and levels in quantities as required at site including scaffolding curing, etc. complete all as directed by Engineer-in-Charge.
10	Chamber: Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internaldimensions, total weight of cover and frame to be Nostless than 38 kg (weight of cover 23 kg and weightof frame 15 kg) :With common burnt clay F.P.S.(Nosn modular) bricks of class designation 7.5 (work includes removing old fixtures) complete all as directed by Engineer-in-Charge.
11	455x610 mm rectangular rcc coverthe weight of the cover to be Not less than 23 kg :- Providing and fixing rcc chamber cover with frame of size weight and numbers as specified including cost of necessary 1:2:4 cement concrete and 1:4 cement mortar for fixing, painting the frame and cover with two coats of approved paintof approved shade etc, complete all as directed by the Engineer-In-Charge
12	300 mm RCC SPUN PIPE: Providing fixing lowering and laying RCC spun pipes cement pipe or RCC hume pipe (class NP2 of ISI)with necessary collars jointing with hemp yarn and cement1:1 including embedding in walls beams floors etc. caulking the joints finishing alighting to proper level etc. Complete as specified and directed.
13	Providing and fixing FRP gratings Including MS framing of angel section of 50x50x5 (Thickness-25mm, width 400mm and suitable length) in position over the rain water drains as directed by EIC.
14	Providing and fixing MS gratings Including MS framing of angel section of 50x50x5 (Thickness-25mm, width 400mm and suitable length) in position over the rain water drains as directed by EIC.
15	STRUCTURAL STEEL WORK: At all levels including supplying cutting fabricating welding or blotting erecting and fixing in position including painting with a primary coat of approved steel primer, including cost of materials labour with chasing in wall or embedding in floor and making good the same by filling 1:2:4 cement concrete and plastering if necessary all as specified and directed by Engineer-in-Charge.
16	Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade all as specified and directed by Engineer-in-Charge.
17	Providingandfixingprecoatedgalvanisedironprofilesheets(size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side ofthe sheet and polyester top coat 15-18microns. Sheet shouldhaveprotectiveguardfilmof25micronsminimumtoavoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineering- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDMseal,completeupto any pitch in horizontal/verticalor curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
18	Using Acrylic emulsion paints ( Plastic Paints) Providing & Applying one / two coatsof primer & thereafter two coats of paint as mentioned below of approved make First quality Asian Paints to the required colour scheme and as per manufacturers instructions / specificationsto the walls, beams, columns, ceilings, partitions doors etc. including thoroughly scrapping the existing surface with sand papers, removing old paint, filling up crevices and levelling with waterproofputty / plaster of paris of necessary to obtain smooth surface etc. complete job including removal of stains, painting spots on floors, aluminium window frame & glassetc asto the entire satisfaction of engineer in charge
19	For metal surface like staircase, channels and doors for the enamel paint Providing & Applying one / two coatsof primer & thereafter two coats of paint as mentioned below of approved make First quality Asian Paints to the required colour scheme and as per manufacturers instructions / specificationsto the walls, beams, columns, ceilings, partitions doors etc. including thoroughly scrapping the existing surface with sand papers, removing old paint, filling up crevices and levelling with waterproofputty / plaster of paris of necessary to obtain smooth surface etc. complete job including removal of stains, painting spots on floors, aluminium window frame & glassetc asto the entire satisfaction of engineer in charge
20	Paver block : Providing & laying 60mm thick factory made cement concrete interlocking paver block heavy duty of M-30 grade made by block making machine with strong vibratory compaction and approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of course sand filling the joints with coarse sand etc., a;; complete as per the direction of Engineer-in-charge.
21	Curb stone: stone providing fixing curb stone of 300x300 section and 200 in width block heavy duty of M-30 grade made by block making machine with strong vibratory compaction and approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of course sand filling the joints with coarse sand etc., a;; complete as per the direction of Engineer-in-charge.
22	Light colour E.W.C.: Providing and fixing white vitreous china pedestaltype water closet (European type W.C. pan) with seatand lid,level white P.V.C. flushing cistern with capacity as mentioned below,including flush pipe, with manually controlled device(handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. It should include "P" or "S" trap as per approved make with left or right vent in position including fixing it on chair bracket or wall bracket. With necessary C.P. brass screws & plugs etc. Make : any make
23	P" OR "S" TRAP: Providing & fixing heavy quality lead "P" or "S" trap with union cleaning eye at bottom white solder joints etc. complete as and when required and as directed by the Engineer-In-Charge.
24	Filling murrum bought from outside: Filling under floors with available earth / murrum/debris or brought from outside sources spreading in 200mm thick layer, watering consolidating to 150mm thickness and finished to desired levels etc. complete. (17Sqm X 0.3M depth) (disposing/taking away the debris outside the premises & diposing as per the guidelines of statutory authorised.