Tender For Supply, Testing, Installation & Commissioning Of Different Machineries/Equipment For Fitter Trade, howrah-West Bengal

Tender For Supply, Testing, Installation & Commissioning Of Different Machineries / Equipment For Fitter Trade- 1 Compressor unitsuitable for Pressure: 8 bar, Delivery: 50 lpm (or more), Reservoir capacity: 24 Litres (or more), 230V, 50 Hz, with pressure regulator and water separator 2 Pneumatic Trainer Kit, each consisting of the following matching components and accessories: I. Single acting cylinder Max. stroke length 50 mm, Bore dia 20 mm – 1 No.II. Double acting cylinder Max. stroke length 100 mm, Bore dia 20 mm, magnetic type – 1 No.III. 3/2-way valve manually-actuated, Normally Closed– 2 No.IV. 3/2-way valve pneumatically-actuated, spring return.V. One-way flow control valve – 2 No. VI. 5/2-way valve with manually-operated switch – 1 No.VII. 5/2-way valve pneumatically-actuated, spring return – 1 No.VIII. 5/2-way pneumatic actuated valvedouble pilot – 1 No. IX. 3/2-way roller lever valvedirect actuation Normally Closed – 2 No. X. Shuttle valve (OR) – 1 No.XI. Two-pressure valve (AND) – 1 No. XII. Pressure Gauge 0 - 16 bar - 1 No. XIII. Manifold with self-closingNRV,6 way – 1 No. XIV.Pushbutton station for electrical signal input with 3 illuminated momentary-contact switches (1 NO + 1 NC) and 1 illuminated maintained-contact switch (1 NO + 1 NC), Contact load 2A, XV. Relay station with 3 ralays each with 4 contact sets (3NO+1NC or Change-over type), 5 A – 1 No. XVI. 3/2-way single solenoid valve with LED - 1 No. XVII. 5/2-way valve pneumatically-actuated, spring return with manual override and LED - 1 No. XVIII. 5/2-way pneumatic actuated valvedouble pilotwith manual override and LED - 1 No. XIX.Power supply unit, Input voltage 85 – 265 V AC, Output voltage: 24 V DC, Output current: max. 4.5 A, short-circuit-proof. - 1 No. XX. Profile plate, AnodisedAluminum1100x700 mm, with carriers, mounting frames and mounting accessories (To be fitted onto the pneumatic workstation) – 1 Set. 3 Pneumatic Workstation with 40 square mm aluminum profile legs, wooden work surface, and one pedestal drawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide: (1) Work Table – Size(Approx.)L1200mmXW900mmXH900mm, with four castor wheels including two lockable wheels at the front side, (2) Drawer – Size (Approx.) – L460mmxW495mm xH158)mm each, and overall size of Drawer unit (Approx.) - L470mmxW495mmxH825mm and (3) Drawer slide height (Approx.) 85mm. 4 Carrier for mounting components, such as PB & relay boxes. 5 Cut section model for pneumatic components 6 Hydraulic Trainer Kit, each consisting of the following matching components and accessories: I. Hydraulic Power pack with (1) external gear pump having a delivery rate of 2.5 lpm, (approx.) @ 1400 rpm operating pressure 60 bar, coupled to a single-phase AC motor (230 V AC) having start capacitor and ON/OFF switch and overload protection, (2) pressure relief valve adjustable from 0 – 60 bar, (3) oil reservoir, =5 litres capacity having sight glass, drain screw, air filter, and P and T ports. – 1 No. II.Pressure relief valvepilot-operated- 1 No. III. Drip tray, steel size 1160 mm x 760 mm. -1 No. IV.Pressure Gauge Glycerin-damped, Indication range of: 0 – 100 bar – 1 No.V.Four-Way distributor with five ports, equipped with a pressure gauge-1 No. VI. Double acting hydraulic cylinderwith a control cam, Piston diameter16 mm, Piston rod diameter10 mm, Stroke length 200 mm. – 1 No.VII. Suitable Weight for vertical loading of hydraulic cylinder -1 No.VIII. Mounting kit for weight for realizing pulling and pushing load -1 No. IX. 3/2-way directional control valve with hand lever actuation. -1 No. X. 4/2-way directional control valve with hand lever actuation -1 No. XI. 4/3-way directional control valve closed-center position, with hand lever actuation -1 No. XII. Non-return valve -1 No.XIII. Pilot-operated check valvepilot to open -1 No. XIV. One-way flow control valve with integrated check valve – 1 No.XVI. Profile plate Anodised Aluminium, 1100x700 mm, with carriers, mounting frames and mounting accessories (To be fitted onto the Hydraulic workstation) – 1 Set. 7 Hydraulic Workstation with 40 square mm aluminium profile legs, wooden work surface, and one pedestal drawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide: (1) Work Table – Size(Approx.)1200mmXW900mmXH900mm, with four castor wheels including two lockable wheels at the front side, (2) Drawer – Size (Approx.) – L460mmxW495mm xH158mm each, and overall size of Drawer unit (Approx.) - L470mmxW495mmxH825mm and(3) Drawer slide height (Approx.) 85mm. 8 Cut section models for hydraulic components

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	06-Nov-2023	Date Corrigendum	Date	24-11-2023

Refer document

INR 10000.0 /-

Refer document

Name of Work: Supply, Testing, Installation & Commissioning of differentMachineries/Equipment for FITTER Trade

Sl. No.	Item Description
1	Compressor unitsuitable for Pressure: 8 bar, Delivery: 50 lpm (or more), Reservoir capacity: 24 Litres (or more), 230V, 50 Hz, with pressure regulator and water separator
2	Pneumatic Trainer Kit, each consisting of the following matching components and accessories: I. Single acting cylinder Max. stroke length 50 mm, Bore dia 20 mm – 1 No.II. Double acting cylinder Max. stroke length 100 mm, Bore dia 20 mm, magnetic type – 1 No.III. 3/2-way valve manually-actuated, Normally Closed– 2 No.IV. 3/2-way valve pneumatically-actuated, spring return.V. One-way flow control valve – 2 No. VI. 5/2-way valve with manually-operated switch – 1 No.VII. 5/2-way valve pneumatically-actuated, spring return – 1 No.VIII. 5/2-way pneumatic actuated valvedouble pilot – 1 No. IX. 3/2-way roller lever valvedirect actuation Normally Closed – 2 No. X. Shuttle valve (OR) – 1 No.XI. Two-pressure valve (AND) – 1 No. XII. Pressure Gauge 0 - 16 bar - 1 No. XIII. Manifold with self-closingNRV,6 way – 1 No. XIV.Pushbutton station for electrical signal input with 3 illuminated momentary-contact switches (1 NO + 1 NC) and 1 illuminated maintained-contact switch (1 NO + 1 NC), Contact load 2A, XV. Relay station with 3 ralays each with 4 contact sets (3NO+1NC or Change-over type), 5 A – 1 No. XVI. 3/2-way single solenoid valve with LED - 1 No. XVII. 5/2-way valve pneumatically-actuated, spring return with manual override and LED - 1 No. XVIII. 5/2-way pneumatic actuated valvedouble pilotwith manual override and LED - 1 No. XIX.Power supply unit, Input voltage 85 – 265 V AC, Output voltage: 24 V DC, Output current: max. 4.5 A, short-circuit-proof. - 1 No. XX. Profile plate, AnodisedAluminum1100x700 mm, with carriers, mounting frames and mounting accessories (To be fitted onto the pneumatic workstation) – 1 Set.
3	Pneumatic Workstation with 40 square mm aluminum profile legs, wooden work surface, and one pedestal drawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide: (1) Work Table – Size(Approx.)L1200mmXW900mmXH900mm, with four castor wheels including two lockable wheels at the front side, (2) Drawer – Size (Approx.) – L460mmxW495mm xH158)mm each, and overall size of Drawer unit (Approx.) - L470mmxW495mmxH825mm and (3) Drawer slide height (Approx.) 85mm.
4	Carrier for mounting components, such as PB & relay boxes.
5	Cut section model for pneumatic components
6	Hydraulic Trainer Kit, each consisting of the following matching components and accessories: I. Hydraulic Power pack with (1) external gear pump having a delivery rate of 2.5 lpm, (approx.) @ 1400 rpm operating pressure 60 bar, coupled to a single-phase AC motor (230 V AC) having start capacitor and ON/OFF switch and overload protection, (2) pressure relief valve adjustable from 0 – 60 bar, (3) oil reservoir, =5 litres capacity having sight glass, drain screw, air filter, and P and T ports. – 1 No. II.Pressure relief valvepilot-operated- 1 No. III. Drip tray, steel size 1160 mm x 760 mm. -1 No. IV.Pressure Gauge Glycerin-damped, Indication range of: 0 – 100 bar – 1 No.V.Four-Way distributor with five ports, equipped with a pressure gauge-1 No. VI. Double acting hydraulic cylinderwith a control cam, Piston diameter16 mm, Piston rod diameter10 mm, Stroke length 200 mm. – 1 No.VII. Suitable Weight for vertical loading of hydraulic cylinder -1 No.VIII. Mounting kit for weight for realizing pulling and pushing load -1 No. IX. 3/2-way directional control valve with hand lever actuation. -1 No. X. 4/2-way directional control valve with hand lever actuation -1 No. XI. 4/3-way directional control valve closed-center position, with hand lever actuation -1 No. XII. Non-return valve -1 No.XIII. Pilot-operated check valvepilot to open -1 No. XIV. One-way flow control valve with integrated check valve – 1 No.XVI. Profile plate Anodised Aluminium, 1100x700 mm, with carriers, mounting frames and mounting accessories (To be fitted onto the Hydraulic workstation) – 1 Set.
7	Hydraulic Workstation with 40 square mm aluminium profile legs, wooden work surface, and one pedestal drawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide: (1) Work Table – Size(Approx.)1200mmXW900mmXH900mm, with four castor wheels including two lockable wheels at the front side, (2) Drawer – Size (Approx.) – L460mmxW495mm xH158mm each, and overall size of Drawer unit (Approx.) - L470mmxW495mmxH825mm and(3) Drawer slide height (Approx.) 85mm.
8	Cut section models for hydraulic components