Tender For Providing False Ceiling And Attending Repair Works To The Establishment Section In Central Jail Campus, Kalapet, Puducherry
Tender Value
5.64 Lakhs
Estimated cost
Bid Submission
09 Oct 2023
0 days left
EMD
11286
Bank guarantee accepted
Document Fee
525
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kalapet → Puducherry
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing False Ceiling And Attending Repair Works To The Establishment Section In Central Jail Campus, Kalapet, Puducherry
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvaized steel sections (galvanized @ 120 grams / sqm , both side inclusive) consisting of main \"T\" runner with suitable spaced joints to get required length and of size 24x38 mm made from 0.30mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross \"T\" of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600mm centre to centre to form a grid of 1200x600mm and secondary cross \"T\" of length 600 mm and size 24 x 25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting / making, opening for services like diffusers , grills , light fittings , fixtures ,smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5 mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8mm spaced at 1200 mmcentre to centre along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyster paint, all complete for all heights as per specifications , drawings - 8 mm thick fully perforated calcium silicate board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg / sq.cm, bending strength 100 kg / sq.cm of size 595x595 mm, having perforation of dia. 10mm with minimum perforated area 18 % with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.85, with 50 mm thick rockwool of 48 kg/cum backing |
| 2 | Providing and laying ceramic glazed floor tiles of size 300 x 300 mm (thickness to be specified by the manufacturer) , of 1st quality conforming to IS :15622, of approved make (Nitco / Kajaria ) in all colours, shades, except white , ivory, grey, fume red brown, laid on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand), including pointing the joints with white cement and matching pigments etc., complete |
| 3 | Deduct for not using 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles |
| 4 | Fixing glazed /ceramic / Vitrified floor tiles with cement based high polymer modified quick - set tile adhesive (water based) conforming to IS:15477, in average 3 mm thickness - ( Using 5 kg adhesive per sqm of tile area) |
| 5 | Providing and fixing Stainless steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I.brackets and stainless steel plug 40mm , including painting of fittings and brackets, cutting and making good the walls wherever required - kitchen sink without drain board - 470x420 mm bowl depth 178mm |
| 6 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid,10 litre low level white vitreous china flushing cistern & C.P.flush bend with fittings & C.I. brackets , 40 mm flush bend , overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets , cutting and making good the walls and floors wherever required - W.C.pan with ISI marked white solid plastic seat and lid |
| 7 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps ,32 mm C.P.brass waste of standard pattern , including painting of fittings and brackets ,cutting and making good the walls wherever required - white Vitreous China wash basin size 630x450 mm with a pair of 15 mm C.P.brass pillar taps |
| 8 | Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete - flexiple pipe - 40mm dia |
| 9 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm or 340x410x265mm sizes respectively. |
| 10 | Providing and fixing PTMT 15 mm urinal spreader size 95x69x100 mm with 1/2\" BSP thread and shapes, weighing not less than 60 gms |
| 11 | Providing and fixing PTMT urinal cock of approved quality and colour - 15mm nominal bore ,80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms |
| 12 | Providing and fixing CP brass health faucet of approved quality - 15 mm nominal bore |
| 13 | Providing and fixing unplasticised PVC connection pipe with brass unions - 45 cm length - 20mm nominal bore |
| 14 | Providing and fixing C.P.brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931- 15 mm nominal bore |
| 15 | Providing and fixing PTMT bib cock of approved quality and colour - 15mm nominal bore, 122 mm long , weighing not less than 99 gms |
| 16 | Providing and fixing glazing in aluminium door, window , ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings ( cost of aluminium snap beading shall be paid in basic item) - with float glass panes of 4.0 mm thickness |
| 17 | Providing and fixing PVC switch lock of 100mm length for aluminium sliding windows |
| 18 | Providing and fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. flat 15x3 mm and nuts & bolts complete - galvanised M.S.wire gauze with 0.63 mm dia wire and 1.4mm aperture on both sides |
| 19 | Applying priming coat - with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron / steel works |
| 20 | Painting with synthetic enamel paint of approved brand and manufacutre to give an even shade - Two or more coats on new work |
| 21 | Supplying and fixing rolling shutters of approved make, made of required size M.S.laths, interlocked together through their entire length and jointed together at the end by end locks , mounted on specially designed pipe shaft with brackets, side guides and arrangements for insideand outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to ISS :4454 -part 1 and M.S.top cover of required thickness for rolling shutters - 80 x 1.25mm M.S.laths with 1.25 mm thick top cover |
| 22 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scrarches etc.complete |
| 23 | Applying one coat of water thinnable cementprimer of approved brand and manufacturer on wall surface - water thinnable cement primer |
| 24 | Wall painting with plastic emulsion paint -Premium of approved brand and manufacture to give an even shade - two or more coats on new work |
| 25 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions , i.e at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling , C.P.brass / stainless steel screws , all complete as per architectural drawings (Glazing, paneling and dash fasteners to be paid for separately) - for fixed portion - Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 26 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 grade I type II , in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings- Pre - laminated particle board with decorative lamination on both sides |
| 27 | Providing and fixing aluminium handle with lock of 75mm dia with necessary screws |
| 28 | Installation , testing and commissioning of ceiling fan , including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FRLS PVC insulated , copper conductor , single core cable , including providing and fixing phenolic laminated sheet cover on the fan box etc asrequired |
| 29 | Supply of 1 x 40W box type single tube light fitting with copper choke & starter without tube. Make: Philips/Bajaj |
| 30 | Providing and fixing sun control film approved brand and quality.The rate include the cost of adhesive compound, labour for fixing and transportation etc., complete all as directed by the Engineer-in-charge. |
| 31 | Providing and fixing vertical blinds of 100mm and louvers made up of non woven fabrics of approved make and quality of required depth and length.The rate includes the cost of 45x32x1.3mm powder coated head rail and control unit, aluminium tilt rod, moulded plastic runners, moulded design, spacers, polyster fibres transverse card, 2mm polyster card having 45mm ABS plastic heads, tilter chain, cord weight, bottom weight and transporting the materials to the work site and labour for fixing etc., complete as directed by the Engineer-in-charge. |
AI Tender Summary
Tender Timeline
Sep 29, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 10, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender