Public Works Department-PWD has published Tender For Stage Contract For Drainage/ Disposal/ Plumbing/ Electrification Etc. Submission Date for this Tender is 05-10-2023. Decoration Work Tenders in anantnag Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Repair and Routine Maintenance of Drainage/ Disposal/ Plumbing/ Electricficationpertaining to Sub Division Anantnag Under Performance based Maintenance Stage contract 2023-24 |
2 | Engagements of JCBfor execuation of works of various natures |
3 | Engagements of Labour work cleaning of drain and disposal of same. |
4 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed,( All kinds of Soil) |
5 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
6 | Earth work in excavation by manualmeans in trenches for foundations, drains, pipes, cables etc .upto required depth ) and for shafts, wells, cesspits including dressing of sides and ramming of bottoms , including getting out excavated earth and disposal of surplus excavated earth as directed,( All kinds of Soil) |
7 | Providing / laying of RCC Pipes in proper position/ grade including cutting of road surface upto required depth, providing requisite cushion including carriage ofall materials and pipesupto site ofwork complete. |
8 | 10"" |
9 | 12"" |
10 | 14"" |
11 | 16"" |
12 | 20"" |
13 | 24"" |
14 | 28"" |
15 | 32"" |
16 | 36"" |
17 | 40"" |
18 | 48"" |
19 | Providing / laying of MS Pipes in proper position/ grade including cutting of road surface upto required depth, providing requisite cushion including carriage ofall materials and pipesupto site ofwork complete. |
20 | 6"" |
21 | 8"" |
22 | 10"" |
23 | 12"" |
24 | Providing and laying of stone soling, hand packed, including carriage of same from approved source upto site of work complete. |
25 | P/L in position cement concrete in1 : 4 : 8(1 cement : 4 coarse sand : 8 graded crushed stone aggregate, 40mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. |
26 | P/L in position cement concrete in1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate, 20mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. |
27 | P/L in position cement concrete in1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate, 20mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. |
28 | P/L in position reinforced cement concrete in 1 : 2 : 4 (1 cement:2 course sand: 4 Crushed graded stone aggregate 20mm nominal size) excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials upto site of work complete. |
29 | P/L in position reinforced cement concrete in 1 : 1.5 : 3 (1 cement:1.5 course sand: 3 Crushed graded stone aggregate 20mm nominal size) excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials upto site of work complete.( all works upto plinth level) |
30 | P/L in position reinforced cement concrete in 1 : 1.5 : 3 (1 cement:1.5 course sand: 3 Crushed graded stone aggregate 20mm nominal size) excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials upto site of work complete.(above plinth level upto level V) |
31 | Reinforcement for RCC work including straightening cutting, bending, placing in position and binding all complete (Thermo mechanically treated bars) including all carriages complete. FE-500 D or more |
32 | Providing / Fixing of necessary farm work / shuttering including strutting, propping etc and removal of same complete |
33 | Foundations, footings, bases for columns |
34 | Return walls, walls (any thickness) including attached pilaster buttresses, plinth and string course fillets, kerbs and steps etc. |
35 | Suspended floors, roofings, landings, balcones and access plateform |
36 | 50mm thick cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished wit a floating coat of neat cement including carriage of all materials from approved sources upto site of work complete |
37 | 40mm thick cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished wit a floating coat of neat cement including carriage of all materials from approved sources upto site of work complete |
38 | 25mm thick cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished wit a floating coat of neat cement including carriage of all materials from approved sources upto site of work complete |
39 | 12mm cement plaster of mix 1:4 (1cement: 4 fine sand) including all carriages complete. |
40 | 12mm cement plaster of mix 1:6 (1cement: 6 fine sand) including all carriages complete. |
41 | 15mm cement plaster of mix 1:4 (1cement: 4 fine sand) including all carriages complete. |
42 | 15mm cement plaster of mix 1:6 (1cement: 6 fine sand) including all carriages complete. |
43 | Engagement of labour /Masdoor for one day |
44 | Providing/Fixing CP Brass fittings of standard quality and make (Jaguar/ equivelant standard make) |
45 | Angle valve |
46 | Bib Cock Long Nose |
47 | Wall Mixer |
48 | Basin Mixer |
49 | Towel rod |
50 | Towel ring |
51 | PVC Connection |
52 | Ball Value |
53 | Ball Cock |
54 | Tanky nipple |
55 | soap case |
56 | Jali |
57 | Providing/Fixing of PVC pipes and fittings ofprince make or equivelant including jointing / testingcomplete(B Type ) |
58 | Pipe 150mm dia |
59 | Pipe 100mm dia |
60 | Pipe 75mm dia |
61 | Door Tee 100mm |
62 | Door Tee 75mm |
63 | Plain Tee 100mm |
64 | Plain Tee 75mm |
65 | Reducer 75 x100mm |
66 | Providing/Fixing of GI pipes and fittings ofprince make or equivelant including jointing / testingcomplete(Medium Type ) |
67 | 15mm dia |
68 | Pipe 25 mm |
69 | Union 15mm |
70 | Union 25mm |
71 | Nipple 6" 15mm |
72 | Nipple 4" 15mm |
73 | Nipple 2" 15mm |
74 | Nipple 6" 20mm |
75 | Nipple 4" 20mm |
76 | Nipple 2" 20mm |
77 | Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete |
78 | P/F 1st quality Ceramic glazed wall tiles conforming to ISI 13753 of minimum thickness 5mm of approved make like, AGL, NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in all colours, shades except bottle green, black of any size as approved by Engineer I/c in skirting, walls and dados etc over 12mm thick bed of cement mortar 1:3 (1 cement : 3 course sand) and jointing with grey cement slurry @ 3.3Kg per Sqm including pointing in white cement mixed with pigment of matching shade complete |
79 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 600 mm x600mm |
80 | Providing and laying of 50mm thick Coloured interlocked rubber moulded cement concrete tiles of required colour and manufactured in M20 Grade ( sample to be got approved by incharge engineer at site) laidover and including a Bed of 50 mm thick sand cusion with all carriages up to site of work |
81 | Providing and laying of pre cast RCC rings for soakage pitof dia 4" and height 7" including earth work in execution including all carriages all complete as per directions |
82 | P/fof pre castcement concrete slab for the soakage pitincluding all carriages all complete as per directions |
83 | Engagement of sucker (3000 ltr capacity ) for cleaning of septic tanks , soakage pits all complete as per the directions of incharge enginer at site |
84 | Providing /Fixing of water Motors Crompton including fixtures and carriages |
85 | 0.5 HP |
86 | 1.0 HP |
87 | 1.5 HP |
88 | Electric part |
89 | Wiring for light point/ fan point / exhaust fan point/ call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc as required. |
90 | Wiring for light point/ fan point / exhaust fan point/ call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular switch, modular plate, suitable GI box earthing the point with 1.5 sq. mmFRLS PVC insulated copper conductor single core cable etc as required |
91 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. |
92 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
93 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
94 | Wiring for circuit/ sub-main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. |
95 | 2x1.5Sq.mm+ 1 x 1.5Sq.mm earth wire |
96 | 2x2.5Sq.mm+ 1 x 2.5Sq.mm earth wire |
97 | 2x4.0Sq.mm+ 1 x 4.0Sq.mm earth wire |
98 | 2x6.0Sq.mm+ 1 x 6.0Sq.mm earth wire |
99 | 2x10.0Sq.mm+ 1 x 6.0Sq.mm earth wire |
100 | 2x16.0Sq.mm+ 1 x 6.0Sq.mm earth wire |
101 | 4x6.0Sq.mm+ 2 x 6.0Sq.mm earth wire |
102 | 4x10.0Sq.mm+ 2 x 6.0Sq.mm earth wire |
103 | 4x16.0Sq.mm+ 2 x 6.0Sq.mm earth wire |
104 | Supplying and drawing followingsizes of FRLS PVC insulated copper conductor single core cable in the existing surface/recessed steel/PVC conduit as required. |
105 | 1 x 1.5 sq. mm |
106 | 2 x 1.5 sq. mm |
107 | 3 x 1.5 sq. mm |
108 | 1 x 2.5 sq. mm |
109 | 2 x 2.5 sq. mm |
110 | 3 x 2.5 sq. mm |
111 | 1 x 4.0 sq. mm |
112 | 2 x 4.0 sq. mm |
113 | 3 x 4.0 sq. mm |
114 | 4 x 4.0 sq. mm |
115 | 5 x 4.0 sq. mm |
116 | 6 x 4.0 sq. mm |
117 | 1 x 6.0 sq. mm |
118 | 2 x 6.0 sq. mm |
119 | 3 x 6.0 sq. mm |
120 | 4 x 6.0 sq. mm |
121 | 5 x 6.0 sq. mm |
122 | 6 x 6.0 sq. mm |
123 | 1 x10.0 sq. mm |
124 | 2 x10.0 sq. mm |
125 | 3 x10.0 sq. mm |
126 | 1 x16.0 sq. mm |
127 | 2 x16.0 sq. mm |
128 | 3 x16.0 sq. mm |
129 | Supplying and fixing of 900 mm sweep ceiling fan on the existing fan hook with necessary connection from ceiling rose to fan using twin core copper wire. |
130 | Supplying and fixing of 1200 mm sweep ceiling fan on the existing fan hook with necessary connection from ceiling rose to fan using twin core copper wire. |
131 | Supplying and fixing of 400 mm sweep wallfanon wall with necessary connection as required. |
132 | Supplying and fixing of 200-300 mm sweep exhaust fan with metal blade complete set on existing holes on wall with necessary connection from ceiling rose . |
133 | Supplying & fixing of following way single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess complete with tinned copper busbar neutral busbar, earth bar, din bar, inter- connections, powder painted including earthing etc. as required. |
134 | 6 way (Double door) |
135 | 8 way (Double door) |
136 | 12 way (Double door) |
137 | 16way (Double door) |
138 | Supplying & fixing of following way horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess complete with tinned copper bus bar neutral buss bar, earth bar, din bar interconnection ,powder painted including earthing etc. as required. |
139 | 4 Way (4+12), (Double door ) |
140 | 6 Way (4+18), (Double door ) |
141 | 8 Way (4+24), (Double door ) |
142 | 12 Way (4+36), (Double door ) |
143 | Earthing with G.I. 40 mm dia. Pipe earth/ plate 600 mm X 600 mm X 6 mm thick connected through GI strip with the panel, including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
144 | Supplying and fixing of following sizes of PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. (ISI Make). |
145 | 20 mm dia. |
146 | 25 mm dia. |
147 | 32 mm dia. |
148 | 40 mm dia. |
149 | Supplying and fixing of Following light fitting on ceiling/ wall with necessary connectionas required. |
150 | 20/22 watt LED 4 feet tube light fitting/fixture |
151 | Decorative LED Hanging Light for officer table as approved by site Engineer |
152 | Mirror light LED fitting with 9/11W LED lamp |
153 | Providing and fixing of LED Lamp. |
154 | 9 Watt |
155 | 12 Watt |
156 | 15 Watt |
157 | 18 Watt |
158 | 20 Watt |
159 | Supplying and installation of recessed/surface mounted slim circular/square type down lighter of following rating. |
160 | 9/10 Watt |
161 | 9/10 Watt |
162 | Supply and fixing of following LED type Street/ flood lights including GI pipe bracket and connections etc as required. |
163 | 45-50 watt |
164 | 60-70 watt |
165 | 90-100 watt |
166 | Providing & fixing of following accessories. |
167 | 5/6 Amp. 3 pinTop |
168 | 5/6 Amp 2 pin Top |
169 | 15/16 Amp 3 pin top |
170 | Insulation Tape (ISI brand) |
171 | Electronic Step Type fan Regular (Piano type) |
172 | Ceiling Rose |
173 | Brass batten/angle holder including (Modular) connection etc. as required. |
174 | Dimmer Type Regulator (with numbering) |
175 | 5/6 Amp SS combined |
176 | 15/16 Amp SS combined |
177 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc.as required. |
178 | 1 or 2 Module |
179 | 3 Module |
180 | 4 Module |
181 | 6 Module |
182 | 8 Module |
183 | 12 Module |
184 | Supplying and fixing following piano type switch/ socket on the existing box/ cover including connection etc. as required. |
185 | 5/6 amp switch |
186 | 15/16 amp switch |
187 | 3 pin 5/6 amp socket outlet |
188 | 6 pin 15/16 amp socket outlet |
189 | Telephone socket outlet |
190 | TV Antenna socket outlet |
191 | Bell push |
192 | 2 pin socket outlet 5 Amp. |
193 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connection but excluding modular plate etc. as required. |
194 | 5/6 amps switch |
195 | 2 way 5/6 amps switch |
196 | 15/16 amp switch |
197 | 3 pin 5/6 amp socket outlet |
198 | 6 pin 15/16 socket outlet |
199 | Telephone socket outlet |
200 | TV Antenna socket outlet |
201 | Bell push |
202 | 2 pin socket outlet 5 Amp. |
203 | Supplying, installation, testing and commissioning of Cubical type Indoor/OutdoorLT Panel Board Suitable for 415 V 3 Phase 4 wire 50 Hz AC supply system with provision for housing incomers, Out Going, COS, Bus Bars etc. as required but excluding the cost of MCCB"s, Bus Bars and Change over as per the following Description (IP:42) General Floor Distribution Panel. The successful tenderer shall take prior approval for the panel builder/fabricator along with G.A drawing wiring diagrams, single line diagram before start of fabrication of LT panel Circuit breaker shall be capable of carrying the full load current defined for 50 degree Celsius without any derating. Thepanel Builder shall be CPRI/ERDA/ANY NABL ACCREDITED LAB approved. |
204 | Providing and fixing following rating and breaking capacity and pole MCCB with thermo magnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (Thermal Magnetic type,Adjustable type) |
205 | 100 Amp, 30 KA, FP MCCB |
206 | 160 Amp, 30 KA, FP MCCB |
207 | 200 Amp, 36 KA, FP MCCB |
208 | 250 Amp, 36 KA, FP MCCB |
209 | ON Load Change Over Switch FP 100 A (Front operated). |
210 | ON Load Change Over Switch FP 200 amp. (Front operated) |
211 | Supplying & laying ofPVC insulated and PVC sheathed/ XLPE Aluminium power cable of 1.1 KV grade of following size on surfaces/ direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. (Armored cable) |
212 | 25 sq. mm 2 core |
213 | 35 sq. mm 2 core |
214 | 50 sq. mm 2 core |
215 | 16 sq. mm 4 core |
216 | 25 sq. mm 3.5 core |
217 | 35 sq. mm 3.5 core |
218 | 50 sq. mm 3.5 core |
219 | 70 sq. mm 3.5 core |
220 | Supplying and fixing of twin core aluminum cable all along the wall surface unarmored. |
221 | 10 sq. mm |
222 | 16 sq. mm |
223 | 25 sq. mm |
224 | 35 sq. mm |
225 | Labour charge for electrician |
226 | Labour charge for Helperelectrician |
227 | Supplying ofRemote Bell. |
228 | Supplying & fixing of Electrical Accessories |
229 | PVC Casing Caping 1" |
230 | PVC Casing Caping 3/4" |
231 | Deep Box |
232 | Fan Box |
233 | Concealed Box |
234 | Supplying and fixing ofPhenolic Laminated Sheet 9" x 11"including cutting the space for switches/socket etc. |
235 | Supplying and fixing of Phenolic Laminated Sheet 9" x 6" including cutting the space for switches/socket etc. |
236 | Supplying and fixing of Phenolic Laminated Sheet 4" x 4" including cutting the space for switches/socket etc. |
237 | Supplying and fixing of Phenolic Laminated Sheet 11" x 13" including cutting the space for switches/socket etc. |
238 | Supply & installation of following type inverters |
239 | Inverter 850VA-1050 VA |
240 | Inverter 1450VA-2000 VA |
241 | Supplying & fixing of Battery 12 Volt. Tubular 150 AH/180AH with36 months Guarantee Note.:- (Rs.2500 /Battery has to be deduct for the scrap of old batteries from allotted rate in case of replacement of battery is out of warranty period. |
242 | Supply of Vaccum cleaner 2200W motor, strong 25kPa suction , blower function available.Reusable dust bag with 6 ltr. Capacity, 360* front swivel wheel for easy cleaning. (complete unit) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail