Tender For Supply And Fixing Of Led In Ward 4 Of Jmc South

Sharing tender

Supply And Fixing Of Led In Ward 4 Of Jmc South , Providing & Fixing Of Ik07 Ip 66 Protected Led Street Light Luminaire On Existing Bracket / Pole. Fixture Made Of Powder Coated Single Piece Pressure Die Cast Aluminum Lm6 / Adc12 Material With Heat Dissipation Fins On Housing With Uv Stabilized Pc / Toughened Glass Coverthe System Level Luminaire Efficacy >=120 Lm / Wt With High Power Leds Is To Be Used And Potted Driver Must Be Potted & Has A Unique Bis R Number With Input Voltage Ac 120 To 270 V Ac With High Voltage Cutoff @>=300 V Ac And Auto Resetting Safety , Input Frequency 50Hz±3% Power Factor >0.95 Driver Efficiency >85% , Thd ( I ) <10% Humidity 10% To 90% Rh Working Temp -5C To 45C . Life Expectancy Equal Or More Than 50000 Burning Hrs With Minimum 70% Lumen Maintened , Color Rendering Index >70 And Cct 5700K +355K. Surge Protection Shall Be Min = 4 Kv Internal And Min 10 Kv External.Manufactures Word Mark / Nameon Die Cast Housing To Allow Traceability / Authenticity. Oem Must Have Its Own In House Nabl Lab Setup For All Testing Facilities For Led Fixtures. ( Lm79 / Lm80 ) Certificate / Report With Liable Warranty Of Product / Accessories From Oem Shall Be Submitted. All As Per Pre Approved By Engineer In Charge.Led Street Light Fixture 45 Watt , Led Street Light Fixture 70 Watt , Providing & Fixing Of Street Light Bracket Made Out From Following Size Of B Class , Medium Class G.I. Pipe Confirming To Is : 1239 P -1 ( 2004 ) With Heavy Duty Pole Clamp, Saddles Suitable Fastners Etc. As Required. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products / Work , Refer Annexure A Attached With This Bsr32 Mm Dia. , Supply & Drawing Wiring For Sub Mains As Per Pwd Specification For Electrical Works With Isi Marked ( Is:694 ) , 1100 Volts Grade Pvc Insulated Flat Twin Core Sheathed Solid Aluminium Conductor With 10 Swg G.I. Support Wire Duly Clipped Including All As Per Pre Approved By Engineer In Charge, Making Connections, As Required. Oem Must Have Its Own In House Nabl Lab Setup For All Testing Facilities For Wires. For Additional Technical Parameters Of Products / Work , Refer Annexure A Attached With This Bsr .4.0 Sq.Mm