Tender For Construction Of Proposed Police Quarters Grade C And B At 6Th Mile And Palzor Stadium Road, Gangtok, Sikkim.
Tender Value
20.08 Crore
Estimated cost
Bid Submission
28 Oct 2023
0 days left
EMD
50.21 Lakhs
Bank guarantee accepted
Document Fee
2 Lakhs
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
gangtok → Sikkim
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Proposed Police Quarters Grade C And B At 6Th Mile And Palzor Stadium Road, Gangtok, Sikkim.
BOQ
| Sl. No. | Item Description |
| 1 | Grade C & D quarters at 6th mile, Tadong. |
| 2 | Building works ( Block A ) |
| 3 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 4 | Excavation work by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m. |
| 5 | Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual Means) |
| 6 | Providing and Laying in position cement concrete of 1:2:4 mix. ( 1 cement, 2 coarse sand, 4 graded stone aggregate of 20 mm & down size )specified grade including compacting curing etc all complete. |
| 7 | Filling insideplinth inbuilding workswith23cm layers, consolidated to 15cm including watering, ramming etc, all complete. |
| 8 | Providing and laying. coarse Rubble Stone Masonry with hammer dressed clean hard selected stone in 1:3:6c.c. (1 cement, 3 sand, 8 clean hard graded stone ships of size 40mm) including bond stone, through stone of size 150mm x 150mm x 450mm manufactured in 1:4:8 (1cement, 4 clean coarse sand, 8 clean hard stone aggregate of size 40 mm and down)and curing etc, complete as per the direction of Engineer in Charge excluding the cost of carriage of materials. |
| 9 | Providing and Laying in position specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements.1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge). |
| 10 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with imported timber from outside the state) |
| 11 | Footing |
| 12 | Square coulmns |
| 13 | Form work for beam, lintels, girders, brersumers & cantilevers. |
| 14 | Wall |
| 15 | Floor slab, roof slab, landing, balcony & access platform |
| 16 | Supplying, bending and placing in position tor steel reinforcement in all R.C.C works including cost of binding wires, all complete. |
| 17 | Providing and Laying first class brick work in one brick thick in superstructureof standard size bricks with 1:5 cement mortar (1cement and 5 clean coarse sand) as per the direction of Engineer in Charge includingcuring etc all complete. |
| 18 | Providing and laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 course sand) including carriage of bricks up to work site, curing etc all complete. |
| 19 | Providing and Laying 20mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing etc all complete. |
| 20 | Providing and Laying white or colored glazed vitrified tiles Pearl (white, marvel Atlanta, jet black etc or equivalent) in flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 21 | Providing & Laying white or colored glazed vitrified tiles of Orient / Somani or equivalent colourin flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 22 | Providing and Laying white or colored glazed vitrified tiles of classic colour or equivalent in flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 23 | Providing and Laying flooring with granite marble stone slabs 20mm thick granite stone slabs flooring of size not less than 1.0 sqm of20mm thick laidover 20mm(average)1:4cm thick bare laid cement concrete and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete. |
| 24 | Providing and Laying 20mm thick granite stone in Risers of steps, skirting and pads, walls, pillars etc laid on 10mm thick base c.m. 1:3 joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete. |
| 25 | Providing and laying. Chisel Dressed Stone Masonry with chisel dressed clean hard selected stone in 1:5 Cement Mortar ( 1cement, 5coarse sand) including centering, liningand curing etc as per the direction of Engineer in Charge, all complete. |
| 26 | Providing, fitting and fixing of dressed sal timberin all types of frames complete |
| 27 | With imported timber from outside the state. |
| 28 | Providing fitting and fixing in position of fully paneled shutters in windows and doors of champ timber or equivalent includingsteel butt hinges screws 12mm thick panels etc complete. |
| 29 | Providing fitting and fixing in position of fully paneled shutters in windows and doors of champ timber or equivalent includingsteel butt hinges screws 12mm thick panels etc complete. |
| 30 | Providing and fixing Brass bright finished brass butt hinges with necessary screws etc. complete. |
| 31 | 150mmx31mmx4mm |
| 32 | Providing, fitting and fixing. sliding door bolts with nuts and screws etc. complete. |
| 33 | Brass (Chromium Plated) |
| 34 | Providing and fixing tower bolts 300x10mm (Barrel type) with necessary screws etc complete. |
| 35 | Brass (copper oxidized) |
| 36 | Providing, fitting and fixing. handles 125mm size with necessary screws etc complete. |
| 37 | Brass (Chromium Plated) |
| 38 | Providingandfixingfactorymade UPVCwhitecolour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required)extrudedprofilesduly reinforced with 1.60 ± 0.2 mmthickgalvanizedmildsteelsectionmadefromroll forming process of required length (shape & size according to uPVC profile), uPVC extrudedglazing beads ofappropriate dimension,EPDM gasket,stainlesssteel( SS 304 grade ) frictionhinges, zincalloy( white powder coated ) casement handles,G.Ifasteners100 x 8 mmsizefor fixing frame to finishedwall, plasticpackers,plastic capsandnecessary stainlesssteelscrewsetc.Profileof frame & sash shall be mitredcutandfusionweldedatallcorners, mullion(if required)shallbealsofusion w elded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) |
| 39 | Casement window double panels with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash / mullion 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 1.50 sqm). |
| 40 | Providing and fixing casement handle made of zinc alloyed (white powder coated) forUPVC casement window with necessary screws etc. complete. |
| 41 | Providing and fixing steel roller for uPVC sliding door with necessary screws etc. complete. |
| 42 | Providing, fitting and fixing of pre-engineered stainless steel guardrail and handrail system with mechanical components and fasteners. (Anchora Railing SystemTop Rail: 316 stainless steel Tube. 2” O. D. with a number 6 ?nish, Posts: Type 316 stainless steel tube. 1 1/2” O.D. with a number 6 ?nish,Grip Rail: Type 316 stainless steel. 1 1/4” O.D. Pipe with a number 6 ?nish. All fasteners to be Stainless Steel 316 Grade. All castings to be polished or satin brush stainless steel. Mounting to use Anchora mounting detail dependent upon the material substrate that railings are mounted. Side mount or base mounts as shown on the architectural drawings.Glass In?ll Panels are to be 3/8” clear tempered glass with polished edges; stainless steel mesh panels to have 2” square opening pattern; custom design in?ll panels to match speci?cation in drawings) all complete. |
| 43 | Supplying, fabricating, fitting and fixing tubular truss including putty, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc complete in curve shaped Sikkim-style roofing as per the standard specification and design and as per the direction of Engineer - in- Chargeall complete. |
| 44 | Providing, fitting, fixing of 24 BWG prepainted (HULLAS) sheet roofing with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with epoxy in each bolts (8 to 10 gm per bolt) including coat of approved steel primer and two coats of approved paint, on overlapping of sheet excluding carriage complete. |
| 45 | Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG Pre-painted HULASSheet fixed with G.I, J or L hooks bolts and nuts 8mm dia Limpets, Bitumen washers complete. |
| 46 | Providing fitting & fixing 16mm thick valley of 90cm overall width in plain prepainted (HULLAS) sheet class I fixed with GI J or L hooks, bolts and nuts 8mm dia filled with epoxy in each bolts (8 to 10 gm per bolt), GI limpet and bitumen washers etc. all complete. |
| 47 | Providing fitting and fixing 30cm deep 24BWG Pre-painted HULAS sheet eaves board including (50x25mm) dressed sal timber beading and M.S. rod brackets all complete. |
| 48 | Providing.&fixing 15cm wide 45cm overall semicircularprepainted( HULLAS )sheet(Class I) gutter with iron brackets 40x3mm size, boltsfilled with epoxy in each bolts, nuts (8 to 10 gm per bolt), washers etc including making, connection with rain water pipes. |
| 49 | Provision for supply, fitting, fixing of liner sheet etc all complete. |
| 50 | Providing and laying plaster of paris putty of 2mm thick over lastered surface to prepare the surface even and smooth all complete: |
| 51 | Providing and Providing and painting with plastic Emulsion paints two or more coats on New surface of required shade to give an even shade including brushing the surface clean of all dirt dust and smoothened by sand paper etc complete. |
| 52 | Providing and Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade including brushing the surface clean of dirt, dust etc and sand papering and filling the scratches complete on New surface. |
| 53 | Providing and French spirit polishing two or more coats including cleaning of the surface of dirt and dust papered smooth etc on new surface complete. |
| 54 | Provision for water proofing treatment at terrace slab etc all complete |
| 55 | Haulage for stock material via surfaced road for the distance of 15 km excluding loading and unloading all complete. |
| 56 | LoadingandunloadingofcementorsteelbyManualMeans |
| 57 | Haulageforsand,Riverviasurfaced road for the distance of 50 km excluding loading and unloading all complete. |
| 58 | Haulagefor coarse aggregate, dry & well shakenviaSurfaced Road for the distance of 60 km excluding loading and unloading all complete. |
| 59 | Haulagefor Stone via Surfaced Roadfor the distance of 50 km excluding loading and unloading all complete. |
| 60 | Haulage for throwing away of excavated earth via Surfaced Road for the distance of the distance of 50km excluding loading and unloading all complete. |
| 61 | Loading and Unloading of Stone Boulder/Stone aggregates/ sand/ kanker/Moorum/excavated earth. ( Placingtipperat loading point, loadingwith front end loader, dumping, turning for return trip, excluding time for haulage and return trip). |
| 62 | Head load of stock materials for a distance beyond30 m and within 100m distance. |
| 63 | Head load of non-stock materials for a distance beyond 30 m and within 100 m distance |
| 64 | Provision for throwing of other waste materials, debris & scrap etc all complete |
| 65 | Building works ( Block B ) |
| 66 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 67 | Excavation work by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m. |
| 68 | Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual Means) |
| 69 | Providing and Laying in position cement concrete of 1:2:4 mix. ( 1 cement, 2 coarse sand, 4 graded stone aggregate of 20 mm & down size )specified grade including compacting curing etc all complete. |
| 70 | Filling insideplinth inbuilding workswith23cm layers, consolidated to 15cm including watering, ramming etc, all complete. |
| 71 | Providing and laying. coarse Rubble Stone Masonry with hammer dressed clean hard selected stone in 1:3:6c.c. (1 cement, 3 sand, 8 clean hard graded stone ships of size 40mm) including bond stone, through stone of size 150mm x 150mm x 450mm manufactured in 1:4:8 (1cement, 4 clean coarse sand, 8 clean hard stone aggregate of size 40 mm and down)and curing etc, complete as per the direction of Engineer in Charge excluding the cost of carriage of materials. |
| 72 | Providing and Laying in position specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements.1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge). |
| 73 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with imported timber from outside the state) |
| 74 | Footing |
| 75 | Square coulmns |
| 76 | Form work for beam, lintels, girders, brersumers & cantilevers. |
| 77 | Wall |
| 78 | Floor slab, roof slab, landing, balcony & access platform |
| 79 | Supplying, bending and placing in position tor steel reinforcement in all R.C.C works including cost of binding wires, all complete. |
| 80 | Providing and Laying first class brick work in one brick thick in superstructureof standard size bricks with 1:5 cement mortar (1cement and 5 clean coarse sand) as per the direction of Engineer in Charge includingcuring etc all complete. |
| 81 | Providing and laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 course sand) including carriage of bricks up to work site, curing etc all complete. |
| 82 | Providing and Laying 20mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing etc all complete. |
| 83 | Providing and Laying white or colored glazed vitrified tiles Pearl (white, marvel Atlanta, jet black etc or equivalent) in flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 84 | Providing & Laying white or colored glazed vitrified tiles of Orient / Somani or equivalent colourin flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 85 | Providing and Laying white or colored glazed vitrified tiles of classic colour or equivalent in flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 86 | Providing and Laying flooring with granite marble stone slabs 20mm thick granite stone slabs flooring of size not less than 1.0 sqm of20mm thick laidover 20mm(average)1:4cm thick bare laid cement concrete and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete. |
| 87 | Providing and Laying 20mm thick granite stone in Risers of steps, skirting and pads, walls, pillars etc laid on 10mm thick base c.m. 1:3 joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete. |
| 88 | Providing and laying. Chisel Dressed Stone Masonry with chisel dressed clean hard selected stone in 1:5 Cement Mortar ( 1cement, 5coarse sand) including centering, liningand curing etc as per the direction of Engineer in Charge, all complete. |
| 89 | Providing, fitting and fixing of dressed sal timberin all types of frames complete |
| 90 | With imported timber from outside the state. |
| 91 | Providing fitting and fixing in position of fully paneled shutters in windows and doors of champ timber or equivalent includingsteel butt hinges screws 12mm thick panels etc complete. |
| 92 | Providing fitting and fixing in position of fully paneled shutters in windows and doors of champ timber or equivalent includingsteel butt hinges screws 12mm thick panels etc complete. |
| 93 | Providing and fixing Brass bright finished brass butt hinges with necessary screws etc. complete. |
| 94 | 150mmx31mmx4mm |
| 95 | Providing, fitting and fixing. sliding door bolts with nuts and screws etc. complete. |
| 96 | Brass (Chromium Plated) |
| 97 | Providing and fixing tower bolts 300x10mm (Barrel type) with necessary screws etc complete. |
| 98 | Brass (copper oxidized) |
| 99 | Providing, fitting and fixing. handles 125mm size with necessary screws etc complete. |
| 100 | Brass (Chromium Plated) |
| 101 | Providingandfixingfactorymade UPVCwhitecolour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required)extrudedprofilesduly reinforced with 1.60 ± 0.2 mmthickgalvanizedmildsteelsectionmadefromroll forming process of required length (shape & size according to uPVC profile), uPVC extrudedglazing beads ofappropriate dimension,EPDM gasket,stainlesssteel( SS 304 grade ) frictionhinges, zincalloy( white powder coated ) casement handles,G.Ifasteners100 x 8 mmsizefor fixing frame to finishedwall, plasticpackers,plastic capsandnecessary stainlesssteelscrewsetc.Profileof frame & sash shall be mitredcutandfusionweldedatallcorners, mullion(if required)shallbealsofusion w elded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) |
| 102 | Casement window double panels with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash / mullion 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 1.50 sqm). |
| 103 | Providing and fixing casement handle made of zinc alloyed (white powder coated) forUPVC casement window with necessary screws etc. complete. |
| 104 | Providing and fixing steel roller for uPVC sliding door with necessary screws etc. complete. |
| 105 | Providing, fitting and fixing of pre-engineered stainless steel guardrail and handrail system with mechanical components and fasteners. (Anchora Railing SystemTop Rail: 316 stainless steel Tube. 2” O. D. with a number 6 ?nish, Posts: Type 316 stainless steel tube. 1 1/2” O.D. with a number 6 ?nish,Grip Rail: Type 316 stainless steel. 1 1/4” O.D. Pipe with a number 6 ?nish. All fasteners to be Stainless Steel 316 Grade. All castings to be polished or satin brush stainless steel. Mounting to use Anchora mounting detail dependent upon the material substrate that railings are mounted. Side mount or base mounts as shown on the architectural drawings.Glass In?ll Panels are to be 3/8” clear tempered glass with polished edges; stainless steel mesh panels to have 2” square opening pattern; custom design in?ll panels to match speci?cation in drawings) all complete. |
| 106 | Supplying, fabricating, fitting and fixing tubular truss including putty, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc complete in curve shaped Sikkim-style roofing as per the standard specification and design and as per the direction of Engineer - in- Chargeall complete. |
| 107 | Providing, fitting, fixing of 24 BWG prepainted (HULLAS) sheet roofing with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with epoxy in each bolts (8 to 10 gm per bolt) including coat of approved steel primer and two coats of approved paint, on overlapping of sheet excluding carriage complete. |
| 108 | Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG Pre-painted HULASSheet fixed with G.I, J or L hooks bolts and nuts 8mm dia Limpets, Bitumen washers complete. |
| 109 | Providing fitting & fixing 16mm thick valley of 90cm overall width in plain prepainted (HULLAS) sheet class I fixed with GI J or L hooks, bolts and nuts 8mm dia filled with epoxy in each bolts (8 to 10 gm per bolt), GI limpet and bitumen washers etc. all complete. |
| 110 | Providing fitting and fixing 30cm deep 24BWG Pre-painted HULAS sheet eaves board including (50x25mm) dressed sal timber beading and M.S. rod brackets all complete. |
| 111 | Providing.&fixing 15cm wide 45cm overall semicircularprepainted( HULLAS )sheet(Class I) gutter with iron brackets 40x3mm size, boltsfilled with epoxy in each bolts, nuts (8 to 10 gm per bolt), washers etc including making, connection with rain water pipes. |
| 112 | Provision for supply, fitting, fixing of liner sheet etc all complete. |
| 113 | Providing and laying plaster of paris putty of 2mm thick over lastered surface to prepare the surface even and smooth all complete: |
| 114 | Providing and Providing and painting with plastic Emulsion paints two or more coats on New surface of required shade to give an even shade including brushing the surface clean of all dirt dust and smoothened by sand paper etc complete. |
| 115 | Providing and Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade including brushing the surface clean of dirt, dust etc and sand papering and filling the scratches complete on New surface. |
| 116 | Providing and French spirit polishing two or more coats including cleaning of the surface of dirt and dust papered smooth etc on new surface complete. |
| 117 | Provision for water proofing treatment at terrace slab etc all complete |
| 118 | Haulage for stock material via surfaced road for the distance of 15 km excluding loading and unloading all complete. |
| 119 | LoadingandunloadingofcementorsteelbyManualMeans |
| 120 | Haulageforsand,Riverviasurfaced road for the distance of 50 km excluding loading and unloading all complete. |
| 121 | Haulagefor coarse aggregate, dry & well shakenviaSurfaced Road for the distance of 60 km excluding loading and unloading all complete. |
| 122 | Haulagefor Stone via Surfaced Roadfor the distance of 50 km excluding loading and unloading all complete. |
| 123 | Haulage for throwing away of excavated earth via Surfaced Road for the distance of the distance of 50km excluding loading and unloading all complete. |
| 124 | Loading and Unloading of Stone Boulder/Stone aggregates/ sand/ kanker/Moorum/excavated earth. ( Placingtipperat loading point, loadingwith front end loader, dumping, turning for return trip, excluding time for haulage and return trip). |
| 125 | Head load of stock materials for a distance beyond30 m and within 100m distance. |
| 126 | Head load of non-stock materials for a distance beyond 30 m and within 100 m distance |
| 127 | Provision for throwing of other waste materials, debris & scrap etc all complete |
| 128 | Water Supply & Sanitation (Block A) |
| 129 | Water Supply |
| 130 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL) |
| 131 | BIB COCK15 MM DIA |
| 132 | STOP COCK15 MM DIA (CONCEALED WORKS) |
| 133 | ANGULAR STOP COCK15 MM DIA |
| 134 | BIB COCK LONG BODY 15 MM DIA |
| 135 | SHOWER ROSE WITH ARM |
| 136 | BASIN MIXTURE |
| 137 | CONNECTING PIPE |
| 138 | Providing and placing on terrace high density polyethylene water storage tank with man hole lid and suitable locking arrangement including making holes for inlet, out let and ball cock including testing etc. all complete: (Sintex or equivalent). |
| 139 | 2000 LITERS CAPACITY |
| 140 | Providing, Fitting and fixing ball valve ( Brass) of approved quality complete with high or low pressure with plastic floats: |
| 141 | ProvidingandfixingChlorinatedPolyvinylChloride(CPVC)pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. |
| 142 | Providing, Fitting and fixing GI pipe of medium class, (excluding trenching, refilling, compactingandthe cost of fittings) all complete. |
| 143 | Sanitary Fittings |
| 144 | Providing, fitting and fixing white vitreous china pedestal (European type) water closet (W.C) pan with seat and lid, with C.P. brass hinges, 10ltr low level cistern with fittings and brackets 40mm flush bend, 20mm overflow pipe with specials, including Providing and painting and making good the wall and floors as required all complete: W.C. pan European One pice (Ivory) CAT NO 92008 |
| 145 | Providing, fitting and fixing. white vitreous china wash in surgeons type basin with CI bracket, painted, 15mm CP brass pillar taps, CP brass chain with rubber plug, 32mm CP brass waste pipe, lead or PVC connection 32mm dia \"CP brass cap and unions, complete including cutting and making good the walls wherever required. HINDWARE |
| 146 | Providing and Fitting Pedestal white colour for of Hind Vitreous wash basin complete. |
| 147 | P/F stain less steelkitchen sink with CI brackets, CP brass chain with rubber plug 40mm CP brass waste, CP brass tap etc complete i/c the fittings, cuttings and making good the wall wherever required. |
| 148 | 610 x 450 x 200 mm. |
| 149 | Bathroom Fittings |
| 150 | Providing and fitting chromium plated toilet paper holder including the making holes and fixed to timber cleats with CP screws washer etc. all complete:. |
| 151 | Providing, fitting and fixingBeveled gauge mirror of superior glass with 6mm A.C. sheets ground and fixed to timber cleats with CP screws, washer etc complete. |
| 152 | Providing and fitting Porcelain soap tray all complete. |
| 153 | Providing, fitting and fixing towel rail of chromium plated brass complete with brackets fixed to the timber cleats, CP brass screws complete. |
| 154 | SOIL WASTE / VENT PIPE FITTINGS |
| 155 | Providing, fitting and fixing soil, waste and vent pipes including testing etc complete. |
| 156 | 160 mm dia. PRINCE / SUPREME or equivalent soil pipe |
| 157 | 300 mm dia. PRINCE / SUPREME or equivalent soil pipe |
| 158 | Providing, fitting and fixing. bends of various types plain or a band with access door, insertion rubber washer 3mm thick bolts and nuts complete SCI or centrifugally cost spun sands pipes. |
| 159 | 160 mm dia. Supreme / Prince |
| 160 | 160 mm dia. Equal junction |
| 161 | 160 mm dia. Tee |
| 162 | 160 mm dia. Offset |
| 163 | Provision for Hand Faucet. |
| 164 | Provision for Water Geyser. |
| 165 | Water Supply & Sanitation (Block B ) |
| 166 | Water Supply |
| 167 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL) |
| 168 | BIB COCK15 MM DIA |
| 169 | STOP COCK15 MM DIA (CONCEALED WORKS) |
| 170 | ANGULAR STOP COCK15 MM DIA |
| 171 | BIB COCK LONG BODY 15 MM DIA |
| 172 | SHOWER ROSE WITH ARM |
| 173 | BASIN MIXTURE |
| 174 | CONNECTING PIPE |
| 175 | Providing and placing on terrace high density polyethylene water storage tank with man hole lid and suitable locking arrangement including making holes for inlet, out let and ball cock including testing etc. all complete: (Sintex or equivalent). |
| 176 | 2000 LITERS CAPACITY |
| 177 | Providing, Fitting and fixing ball valve ( Brass) of approved quality complete with high or low pressure with plastic floats: |
| 178 | ProvidingandfixingChlorinatedPolyvinylChloride(CPVC)pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. |
| 179 | Providing, Fitting and fixing GI pipe of medium class, (excluding trenching, refilling, compactingandthe cost of fittings) all complete. |
| 180 | Sanitary Fittings |
| 181 | Providing, fitting and fixing white vitreous china pedestal (European type) water closet (W.C) pan with seat and lid, with C.P. brass hinges, 10ltr low level cistern with fittings and brackets 40mm flush bend, 20mm overflow pipe with specials, including Providing and painting and making good the wall and floors as required all complete: W.C. pan European One pice (Ivory) CAT NO 92008 |
| 182 | Providing, fitting and fixing. white vitreous china wash in surgeons type basin with CI bracket, painted, 15mm CP brass pillar taps, CP brass chain with rubber plug, 32mm CP brass waste pipe, lead or PVC connection 32mm dia \"CP brass cap and unions, complete including cutting and making good the walls wherever required. HINDWARE |
| 183 | Providing and Fitting Pedestal white colour for of Hind Vitreous wash basin complete. |
| 184 | P/F stain less steelkitchen sink with CI brackets, CP brass chain with rubber plug 40mm CP brass waste, CP brass tap etc complete i/c the fittings, cuttings and making good the wall wherever required. |
| 185 | 610 x 450 x 200 mm. |
| 186 | Bathroom Fittings |
| 187 | Providing and fitting chromium plated toilet paper holder including the making holes and fixed to timber cleats with CP screws washer etc. all complete:. |
| 188 | Providing, fitting and fixingBeveled gauge mirror of superior glass with 6mm A.C. sheets ground and fixed to timber cleats with CP screws, washer etc complete. |
| 189 | Providing and fitting Porcelain soap tray all complete. |
| 190 | Providing, fitting and fixing towel rail of chromium plated brass complete with brackets fixed to the timber cleats, CP brass screws complete. |
| 191 | SOIL WASTE / VENT PIPE FITTINGS |
| 192 | Providing, fitting and fixing soil, waste and vent pipes including testing etc complete. |
| 193 | 160 mm dia. PRINCE / SUPREME or equivalent soil pipe |
| 194 | 300 mm dia. PRINCE / SUPREME or equivalent soil pipe |
| 195 | Providing, fitting and fixing. bends of various types plain or a band with access door, insertion rubber washer 3mm thick bolts and nuts complete SCI or centrifugally cost spun sands pipes. |
| 196 | 160 mm dia. Supreme / Prince |
| 197 | 160 mm dia. Equal junction |
| 198 | 160 mm dia. Tee |
| 199 | 160 mm dia. Offset |
| 200 | Provision for Hand Faucet. |
| 201 | Provision for Water Geyser. |
| 202 | Site Levelling & Protective Works. |
| 203 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 204 | Excavation in hilly area in ordinary rock not requiring blasting by Manual means including cutting and trimming of slopes and disposal of cut material with all lift and lead upto 50 metres. |
| 205 | Excavation work by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m. |
| 206 | Providing and Laying Plum concrete in 1:2:4 c.c. (1cement, 2coarse sand, 4clean hard graded stone chips of 20 mm down nominal gauge) with 70% cleanhard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction ofEngineer in Charge. |
| 207 | Providing and laying hand packed stone filling in building works with clean hard selected stones, all complete. |
| 208 | Providing and Laying in position cement concrete of 1:2:4 mix. ( 1 cement, 2 coarse sand, 4 graded stone aggregate of 20 mm & down size )specified grade including compacting curing etc all complete. |
| 209 | Providing box drain of 30 cm (ht) x 45 cm (width) internal dimension with 1:2:4 Plum concrete (20mm & down) inside walls thickness of 23 cm (hill side) and 30 cm (road side)and 1:3:6 (20 mm & down) base concrete of thickness of 15 cmwith standard specification over 15 cm stone soling including providing & laying guard stones complete, as per thedirection of theEngineer in Charge. |
| 210 | Haulage for stock material via surfaced road for the distance of 15 km excluding loading and unloading all complete. |
| 211 | LoadingandunloadingofcementorsteelbyManualMeans |
| 212 | Haulageforsand,Riverviasurfaced road for the distance of 60 km excluding loading and unloading all complete. |
| 213 | Haulagefor coarse aggregate, dry & well shakenviaSurfaced Road for the distance of 60 km excluding loading and unloading all complete. |
| 214 | Haulagefor Stone via Surfaced Roadfor the distance of 50 km excluding loading and unloading all complete. |
| 215 | Haulage for throwing away of excavated earth via Surfaced Road for the distance of the distance of 50km excluding loading and unloading all complete. |
| 216 | Loading and Unloading of Stone Boulder/Stone aggregates/ sand/ kanker/Moorum/excavated earth. ( Placingtipperat loading point, loadingwith front end loader, dumping, turning for return trip, excluding time for haulage and return trip). |
| 217 | Head load of stock materials for a distance beyond30 m and within 100m distance. |
| 218 | Head load of non-stock materials for a distance beyond 30 m and within 100 m distance |
| 219 | Provision for construction of approach road.( To be paid as per actual measurement). |
| 220 | Provision for internal & external electrification. |
| 221 | Provision for installation of 8 pax lift. ( for both A & B ). |
| 222 | Provision for installation of generator. ( for both A & B ). |
| 223 | Provision for aesthetic traditional design in external surface. |
| 224 | Provision for landscapping & beautification . |
| 225 | Grade B quarters at Palzor Stadium road. |
| 226 | Building works |
| 227 | Excavation work by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated |
| 228 | Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual Means) |
| 229 | Providing and Laying in position cement concrete of 1:2:4 mix. ( 1 cement, 2 coarse sand, 4 graded stone aggregate of 20 mm & down size )specified grade including compacting curing etc all complete. |
| 230 | Filling insideplinth inbuilding workswith23cm layers, consolidated to 15cm including watering, ramming etc, all complete. |
| 231 | Providing and laying. coarse Rubble Stone Masonry with hammer dressed clean hard selected stone in 1:3:6c.c. (1 cement, 3 sand, 8 clean hard graded stone ships of size 40mm) including bond stone, through stone of size 150mm x 150mm x 450mm manufactured in |
| 232 | Providing and Laying in position specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements.1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge). |
| 233 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with imported timber from outside the state) |
| 234 | Footing |
| 235 | Square coulmns |
| 236 | Beam |
| 237 | WALL |
| 238 | Floor slab, roof slab, landing, balcony & access platform |
| 239 | Supplying, bending and placing in position tor steel reinforcement in all R.C.C works including cost of binding wires, all complete. |
| 240 | Providing and Laying first class brick work in one brick thick in superstructureof standard size bricks with 1:5 cement mortar (1cement and 5 clean coarse sand) as per the direction of Engineer in Charge includingcuring etc all complete. |
| 241 | Providing and laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 course sand) including carriage of bricks up to work site, curing etc all complete. |
| 242 | Providing and Laying 20mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing etc all complete. |
| 243 | Providing and Laying white or colored glazed vitrified tiles Pearl (white, marvel Atlanta, jet black etc or equivalent) in flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white |
| 244 | Providing & Laying white or colored glazed vitrified tiles of Orient / Somani or equivalent colourin flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 245 | Providing and Laying white or colored glazed vitrified tiles of classic colour or equivalent in flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 246 | Providing and Laying flooring with granite marble stone slabs 20mm thick granite stone slabs flooring of size not less than 1.0 sqm of20mm thick laidover 20mm(average)1:4cm thick bare laid cement concrete and joint treated with white cement, mixed wit |
| 247 | Providing and Laying 20mm thick granite stone in Risers of steps, skirting and pads, walls, pillars etc laid on 10mm thick base c.m. 1:3 joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as pe |
| 248 | Providing and laying. Chisel Dressed Stone Masonry with chisel dressed clean hard selected stone in 1:5 Cement Mortar ( 1cement, 5coarse sand) including centering, liningand curing etc as per the direction of Engineer in Charge, all complete. |
| 249 | Provision for Terrace Treatment |
| 250 | Providing, fitting and fixing of dressed sal timberin all types of frames complete |
| 251 | Providing, fitting and fixing water proof flush door shutters, solid block hard core construction with frame of 1st class hard timber with well matched 3mm teak ply decorative type on one faces of the shutters including hinges with screws complete. |
| 252 | Providing fitting and fixing in position of fully paneled shutters in windows and doors of champ timber or equivalent includingsteel butt hinges screws 12mm thick panels etc complete. |
| 253 | Providing and fixing Brass bright finished brass butt hinges with necessary screws etc. complete. |
| 254 | Providing, fitting and fixing. sliding door bolts with nuts and screws etc. complete. |
| 255 | Providing and fixing tower bolts 300x10mm (Barrel type) with necessary screws etc complete. |
| 256 | Providing, fitting and fixing. handles 125mm size with necessary screws etc complete. |
| 257 | Providingandfixingfactorymade UPVCwhitecolour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required)extrudedprofilesduly reinforced with 1.60 ± 0.2 mmthickgalvani |
| 258 | Providing, fitting and fixing of pre-engineered stainless steel guardrail and handrail system with mechanical components and fasteners. (Anchora Railing SystemTop Rail: 316 stainless steel Tube. 2” O. D. with a number 6 ?nish, Posts: Type 316 stainless st |
| 259 | Supplying, fabricating, fitting and fixing tubular truss including putty, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc complete in curve shaped Sikkim-style roofi |
| 260 | Providing, fitting, fixing of 24 BWG prepainted (HULLAS) sheet roofing with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with epoxy in each bolts (8 to 10 gm per bolt) including coat of approved steel primer and two coats of ap |
| 261 | Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG Pre-painted HULASSheet fixed with G.I, J or L hooks bolts and nuts 8mm dia Limpets, Bitumen washers complete. |
| 262 | Providing fitting and fixing 30cm deep 24BWG Pre-painted HULAS sheet eaves board including (50x25mm) dressed sal timber beading and M.S. rod brackets all complete. |
| 263 | Providing.&fixing 15cm wide 45cm overall semicircularprepainted( HULLAS )sheet(Class I) gutter with iron brackets 40x3mm size, boltsfilled with epoxy in each bolts, nuts (8 to 10 gm per bolt), washers etc including making, connec |
| 264 | Provision for supply, fitting, fixing of liner sheet etc all complete. |
| 265 | Providing and laying plaster of paris putty of 2mm thick over lastered surface to prepare the surface even and smooth all complete: |
| 266 | Providing and Providing and painting with plastic Emulsion paints two or more coats on New surface of required shade to give an even shade including brushing the surface clean of all dirt dust and smoothened by sand paper etc complete. |
| 267 | Providing and Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade including brushing the surface clean of dirt, dust etc and sand papering and filling the scratches complete on |
| 268 | Providing and French spirit polishing two or more coats including cleaning of the surface of dirt and dust papered smooth etc on new surface complete. |
| 269 | Haulage for stock material via surfaced road for the distance of 15 km excluding loading and unloading all complete. |
| 270 | LoadingandunloadingofcementorsteelbyManualMeans |
| 271 | Haulageforsand,Riverviasurfaced road for the distance of 50 km excluding loading and unloading all complete. |
| 272 | Haulagefor coarse aggregate, dry & well shakenviaSurfaced Road for the distance of 60 km excluding loading and unloading all complete. |
| 273 | Haulagefor Stone via Surfaced Roadfor the distance of 50 km excluding loading and unloading all complete. |
| 274 | Haulage for throwing away of excavated earth via Surfaced Road for the distance of the distance of 50km excluding loading and unloading all complete. |
| 275 | Loading and Unloading of Stone Boulder/Stone aggregates/ sand/ kanker/Moorum/excavated earth. ( Placingtipperat loading point, loadingwith front end loader, dumping, turning for return trip, excluding time for haulage and return trip). |
| 276 | Provision for carriage of materials & throwing of waste materials, debris etc all complete |
| 277 | Provision for dismantaling of old R.C.C building structure |
| 278 | PROTECTIVE WORK |
| 279 | Excavation work by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated |
| 280 | Providing and Laying Plum concrete in 1:2:4 c.c. (1cement, 2coarse sand, 4clean hard graded stone chips of 20 mm down nominal gauge) with 70% cleanhard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the di |
| 281 | Providing and laying hand packed stone filling in building works with clean hard selected stones, all complete. |
| 282 | Providing box drain of 30 cm (ht) x 45 cm (width) internal dimension with 1:2:4 Plum concrete (20mm & down) inside walls thickness of 23 cm (hill side) and 30 cm (road side)and 1:3:6 (20 mm & down) base concrete of thickness of 15 cmwith standard sp |
| 283 | Haulage for stock material via surfaced road for the distance of 15 km excluding loading and unloading all complete. |
| 284 | LoadingandunloadingofcementorsteelbyManualMeans |
| 285 | Haulageforsand,Riverviasurfaced road for the distance of 60 km excluding loading and unloading all complete. |
| 286 | Haulagefor coarse aggregate, dry & well shakenviaSurfaced Road for the distance of 60 km excluding loading and unloading all complete. |
| 287 | Haulagefor Stone via Surfaced Roadfor the distance of 50 km excluding loading and unloading all complete. |
| 288 | Haulage for throwing away of excavated earth via Surfaced Road for the distance of the distance of 50km excluding loading and unloading all complete. |
| 289 | Loading and Unloading of Stone Boulder/Stone aggregates/ sand/ kanker/Moorum/excavated earth. ( Placingtipperat loading point, loadingwith front end loader, dumping, turning for return trip, excluding time for haulage and return trip). |
| 290 | Head load of stock materials for a distance beyond30 m and within 100m distance. |
| 291 | Head load of non-stock materials for a distance beyond 30 m and within 100 m distance |
| 292 | Provision for dismantaling of old plum wall |
| 293 | WATER SUPPLY & SANITATION |
| 294 | WATER SUPPLY |
| 295 | BIB COCK15 MM DIA |
| 296 | STOP COCK15 MM DIA (CONCEALED WORKS) |
| 297 | ANGULAR STOP COCK15 MM DIA |
| 298 | BIB COCK LONG BODY 15 MM DIA |
| 299 | SHOWER ROSE WITH ARM |
| 300 | BASIN MIXTURE |
| 301 | CONNECTING PIPE |
| 302 | Providing and placing on terrace high density polyethylene water storage tank with man hole lid and suitable locking arrangement including making holes for inlet, out let and ball cock including testing etc. all complete: (Sintex or equivalent). |
| 303 | 2000 LITERS CAPACITY |
| 304 | Providing, Fitting and fixing ball valve ( Brass) of approved quality complete with high or low pressure with plastic floats: |
| 305 | ProvidingandfixingChlorinatedPolyvinylChloride(CPVC)pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing o |
| 306 | SANITARY FITTING |
| 307 | Providing, fitting and fixing white vitreous china pedestal (European type) water closet (W.C) pan with seat and lid, with C.P. brass hinges, 10ltr low level cistern with fittings and brackets 40mm flush bend, 20mm overflow pipe with specials, including P |
| 308 | Providing, fitting and fixing. white vitreous china wash in surgeons type basin with CI bracket, painted, 15mm CP brass pillar taps, CP brass chain with rubber plug, 32mm CP brass waste pipe, lead or PVC connection 32mm dia \"CP brass cap and unions, compl |
| 309 | Providing and Fitting Pedestal white colour for of Hind Vitreous wash basin complete. |
| 310 | P/F stain less steelkitchen sink with CI brackets, CP brass chain with rubber plug 40mm CP brass waste, CP brass tap etc complete i/c the fittings, cuttings and making good the wall wherever required. |
| 311 | BATHROOM FITTING |
| 312 | Providing and fitting chromium plated toilet paper holder including the making holes and fixed to timber cleats with CP screws washer etc. all complete:. |
| 313 | Providing, fitting and fixingBeveled gauge mirror of superior glass with 6mm A.C. sheets ground and fixed to timber cleats with CP screws, washer etc complete. |
| 314 | Providing and fitting Porcelain soap tray all complete. |
| 315 | Providing, fitting and fixing towel rail of chromium plated brass complete with brackets fixed to the timber cleats, CP brass screws complete. |
| 316 | SOIL WASTE / VENT PIPE FITTINGS (ISI) |
| 317 | Providing, fitting and fixing soil, waste and vent pipes including testing etc complete. |
| 318 | Providing, fitting and fixing double equal junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. |
| 319 | Providing, fitting and fixing. bends of various types plain or a band with access door, insertion rubber washer 3mm thick bolts and nuts complete SCI or centrifugally cost spun sands pipes. |
| 320 | Provision for Health Faucet. |
| 321 | Provision for Water Geyser. |
| 322 | Provision for micro piling. |
| 323 | Provision for internal & external electrification.( To be paid as per actual measurement) |
| 324 | Provision for installation of lift |
| 325 | Provision for installation of generator. |
| 326 | Provision for landscapping beautification amd yard development. |
| 327 | Provision for Aesthetic traditional design in external surface. |
AI Tender Summary
Tender Timeline
Sep 28, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 31, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender