|
| 1 | K nail sizes 8-14mm, length 32-44mm |
| 2 | Radius intramedullary nails 2-4mm diameter22-32cm length |
| 3 | Ulna intramedullary nails 2-4mm diameter22-32cm length |
| 4 | 3.5mm reconstruction plates 5-12 holes with seven 3.5mm screws |
| 5 | 3.5mm Low Contact DCP 6-12 holes with seven 3.5mm cortical screws (12 to 24 mm) |
| 6 | 3.5mm locking compression plate 6-12 holes with six locking screws and two non locking screws (12 to 24 mm) (Stainless Steel) |
| 7 | 1/3 tubular plates 6-8 holes with six 3.5mm cortical screws (12 to 24 mm) (Stainless Steel) |
| 8 | 4.5 mm Narrow DCP, low contact, 7-12 holes with seven 4.5mm (14 to 28mm length) (Stainless Steel) |
| 9 | Narrow low contact locking compression Plate 6-12 holes with six locking screws and two non locking screws (stainless steel) (14-28mm) |
| 10 | 4.5 mm Broad low contact Locking Compression Plate, 6-18 holes with seven 4.5mm screws (14-28mm) (Stainless Steel) |
| 11 | 2.7mm SFS DCP, 5 to 8 holes with six 2.7mm screws (length 10-20mm) |
| 12 | 4.0 mm cannulated cancellous screw, partially threaded with guide wire and washer, length 30-60mm, various thread lengths |
| 13 | 6.5mm partially threaded cancellous screw with washer (length 35-110mm, thread length 12mm/ 16mm/ 32mm) |
| 14 | 7.0mm cannulated cancellous screw, partially threaded with guided wire and washer (length 65 to 110mm, thread lengths 12mm/16mm/32mm) |
| 15 | Proximal tibial lateral anatomical locking plate 5 to 7 holes with seven 4.5mm locking screws and two 4.5mm cortical screws (stainless steel). |
| 16 | Proximal tibial lateral anatomical locking plate 5 to 7 holes with seven 3.5mm locking screws and two 3.5mm cortical screws; should have atleast 4 screws in periarticular region (Titanium). |
| 17 | Proximal tibial medial anatomical locking plate 5 to 7 holes with seven 3.5mm locking screws and two 3.5mm cortical screws, atleast 3 screws in periaticular region (Titanium). |
| 18 | Proximal tibial Posteromedial anatomical locking plate 5 to 7 holes with five 3.5mm locking screws and two cortical screws (Titanium). |
| 19 | Distal tibial medial anatomical locking plate 5 to 7 holes with 7 locking screws and two cortical screws (Stainless Steel) |
| 20 | Distal femuranatomical locking plate, 6 to 12 holes on the shaft, with 8 holes screws and for 4.5mm cortical screws (stainless steel). |
| 21 | Proximal humerus anatomical locking plate (PHLOS type) 5 to 7 holes on the shaft with 7 locking screws and two 3.5mm cortical screws (Titanium). |
| 22 | Distal humerus anatomical locking plate set (two plates- one medial and one lateral, with 6 locking screws and 6 cortical screws), 4 to 8 holes on the shaft of the plate (Stainless Steel) |
| 23 | Distal humerus anatomical metaphyseal locking plate suitable for fixation of metaphyseal fractures of the distal humerus with 6 locking screws and 6 cortical screws, 6 to 14 holes (Stainless Steel) |
| 24 | Proximal ulna anatomical locking plate suitable for fixation of proximal ulna fractures with 6 locking screws and 6 cortical screws, 4 to 8 screws on the shaft (Stainless Steel) |
| 25 | Anatomical locking plate for distal fibula 4.8 hole with six locking and 2 cortical screws (Stainless steel) |
| 26 | Anatomical locking lateral end clavicle plate with 2.7 and 3.5mm locking screws.Set comprising of one plate, four 2.7 and three 3.5mm locking screws |
| 27 | Titanium Proximal medial tibial osteotomy locking plate for HTO with hydroxyapatite/ TCP wedges 7-15mm sizes |
| 28 | Anatomical locking plate for clavicle mild shaft fractures.One set comprising of one plate and six 3.5mm locking screws |
| 29 | Eight plate for pediatricphyseal growth modulation with a pair of cannulated fully threaded cancellous screw, titanium make |
| 30 | Anatomical locking lateral end clavicle plate with 2.7and 3.5mm locking screws.Set comprising of one plate, four 2.7 and three 3.5mm locking screws |
| 31 | Coventary staples Titanium/ U Staple, Misc. sizes |
| 32 | Proximal femoral nail- 34 to 44 cm length, 9 to 12 mm diameter, with two proximal and two distal locking bolts. (Instrumentation to be provided free of charges during the surgery). |
| 33 | Proximal femoral nail with single screw/ blade/ functional single screw to provide rotational stability to the neck.Sizes: small to long (One Set comprises of one nail plus functional screw/ blade, end cap and two distal locking bolts). |
| 34 | Interlocking nails for Femur with 2 proximal and 2 distal locking screws (nail diameter 9-12mm, length 36-44mm) |
| 35 | Interlocking nails for Tibia with 2 proximal and 2 distal locking screws (nail diameter 8-10mm, length 26-34mm) |
| 36 | Tibia nail (Expert type) for proximal and distal metaphyseal fractures with 6 locking bolts, misc sizes (Titanium) |
| 37 | Interlocking nails for Humerus with provision for minimum 3 proximal and 2 distal locking screws (nail diameter 6-8mm, length 22-30mm) |
| 38 | Distal femoral nail with two proximal and three distal locking screws, anteroposterior curve to accommodate the curve of femur (nail diameter 9-12mm, length option in increment of 2cm from approx. 26cm-38cm), proximal locking option preferably in antero-posterior direction |
| 39 | Reconstruction nail for Femur with provision of trochanteric entry point, diameter 9-12mm and 36-44mm length with four bolts of assorted size |
| 40 | DHS Set consisting of one Richard Screw (65-110mm), one compression screw, one short/ long barrel plate (4-8 holes) & 4 cortical screws, misc. sizes |
| 41 | DCS Set consisting of one Richard Screw, one compression screw, one plate (4-8 holes) and five 4.5mm cortical screws, one 6.5mm cancellous screw |
| 42 | DCS Set consisting of one Richard Screw, one compression screw, one plate (9-14 holes) and six 4.5mm cortical screws, one 6.5mm cancellous screw |
| 43 | Distal femur osteotomy plate with 8 locking screws |
| 44 | Distal tibia anterolateral plate with 8 locking screws 3.5mm screws |
| 45 | Distal femur medial plate with 7 locking screws |
| 46 | Calcaneal locking plate with eight 3.5mm locking screws |
| 47 | Cable system with crimp for encirclage in peri-prosthetic fractures (USFDA*Only) |
| 48 | Locking Paediatric hip plate 3.5mm and 5mm with anglulation option of 100/110/120/130/140/150 with 7 screws |
| 49 | Recon plate for pelvis fracture- 9 holes to 18 hole with 7 screw |
| 50 | Ankle arthrodesis nail - for tibio-talo calcaneal fusion with 5 locking screws |
| 51 | Knee arthodesis interlocking nail with 4 locking bolts |
| 52 | Pediatric expendable nail (Telescopic nail- Fassier Duval Type) |
| 53 | Locking plate for peri-prosthetic proximal femur fracture with 8 screws and 2 cable ties |
| 54 | Ring fixator set- one set consists of 10 half rings of aluminum rings (120-220mm) eight 1.8mm thickness wires (buyonat and trochar tip), eight 1.8 mm thickness olive wires(buyonat and trochar tip), 16 rods, 6 male posts, 10 flat washer and 16 conical washers |
| 55 | Ring fixator set- one set consists of 4 half rings of aluminum rings (120-220mm), one Italian archwith 2 oblique supports, five 1.8 mm thickness olive wires (buyonat and trochar tip), 12 rods, 4 male posts, 5 rancho cubes and 5 tapered half pins |
| 56 | Hydroxyapatite coated tapered half pins 5mm to 6mm tapering |
| 57 | Software guided hexapod fixator for 6 axis correction for use along with illizarov ring fixator |
| 58 | Schanz screw 2.5/3.0 mm |
| 59 | Schanz screw 3.5/4.5 mm (thread sizes 12/18 mm) |
| 60 | Schanz screw5.0/5.5 mm (cortical) (thread size 12/18/32 mm) |
| 61 | Schanz screw5.0/5.5 mm (cancellous) (thread size 12/18/32 mm) |
| 62 | Denham\"s pin 4.5/ 5.0 mm (core diameter at the threaded portion) |
| 63 | Steinman pin 3.0/3.5 mm |
| 64 | Steinman pin 4.5/5.0 mm |
| 65 | Universal external fixator clamp |
| 66 | Tube to tube clamps |
| 67 | Tubular rods -4, 6,8\" |
| 68 | Tubular rods -10, 12, 14\" |
| 69 | Forearm fixator clamps for 2.5mm pins |
| 70 | Forearm fixator clamps for 3.5mm pins |
| 71 | Forearm fixator connecting rods - all sizes |
| 72 | Spanners (size 6/7) |
| 73 | Spanners (size 8/9) |
| 74 | Spanners (size 10/11) |
| 75 | Ring fixator set: one set consists of eight half rings stainless steel(120 to 220 MM), eight 1.8 mm K wires (Bayonet and trocar tip), 12 threaded rods (4 to 10\"), 16 slotted nuts (centric/ accentric/ schanz screw holding), 8 ring connecting bolts, 4 washers, 80 nuts, 2 spanners size 10. |
| 76 | Ring fixator set: one set consists of eight carbon fiber half rings (120 to 220 MM), eight 1.8 mm K wires (Bayonet and trocar tip), 12 threaded rods (4 to 10\"), 16 slotted nuts (centric/ accentric/ schanz screw holding), 8 ring connecting bolts, 20 washers, 80 nuts, 2 spanners size 10 |
| 77 | K wires 1.8mm for illizarov |
| 78 | Threaded rods - 4\", 6\" |
| 79 | Threaded rods -8\", 10\" |
| 80 | Threaded rods -12\" |
| 81 | Twisted plate (misc sizes) |
| 82 | Straight plate (misc sizes) |
| 83 | Male posts (1 to 5 hole) |
| 84 | Male posts (6 to 10 hole) |
| 85 | Female posts (1 to 5 hole) |
| 86 | Female posts (6 to 10 hole) |
| 87 | Hexagonal socket (misc length) |
| 88 | Telescopic rods |
| 89 | Concavo- convex washers |
| 90 | Hinges for Illizarov ring |
| 91 | Distracter- small, with 4 Schanz screws, 1.5/ 2.5 mm, with one Allen key. Unilateral distracter with clamps for two pins proximal and two distal, suitable for application on fingers |
| 92 | Distracter- medium, with 4 Schanz screws, 2.5/ 3.5 mm, with one Allen key. Unilateral distracter with clamps for two pins proximal and two distal, suitable for application on wrist |
| 93 | Distracter- large, with 4 Schanz screws, 3.5 mm, with one Allen key. Unilateral distracter with clamps for two pins proximal and two distal, suitable for application on forearm and ankle |
| 94 | Mono-axial external fixation device set with provision of bone transport. One set comprising of one mono rail, three clamps (central clamp/ end clamp/ swivel clamp), two Compression Distraction unit (misc sizes), Allen key, Six tapered schanz screws, 6.0 to 6.5 mm diameter |
| 95 | Herbert type cannulated screws (titanium) with two guided wires, Diameter 2.4 mm, length 9 to 30 mm (USFDA* Only) |
| 96 | Herbert type cannulated screws (titanium) with two guide wires, Diameter 3.0 mm, length 9 to 30 mm (USFDA* Only) |
| 97 | Herbert type cannulated screws (titanium) with two guided wires, Diameter 3.5mm, 12 to 30 mm lengths |
| 98 | Herbert type cannulated screws (titanium) with two guided wires, Diameter 4.5mm, misc length |
| 99 | Mini fragment plates (1.5/ 2.0/ 2.4 mm), locking (all sizes, different shapes) and corresponding screws (screw heads low profile), titanium, star head (USFDA* Only) |
| 100 | Tap 2.7mm |
| 101 | Tap 3.5mm |
| 102 | Tap 4.5mm |
| 103 | Drill bits 2.5mm |
| 104 | Drill bits 3.2mm (different lengths) |
| 105 | Drill bits 4.5mm |
| 106 | Crutchfield tongs for skull traction (all sizes) with one guarded drill bit |
| 107 | Distal radius volar anatomical locking plates 2.4/2.7 mm, 4 to 8 holes on the shaft with 5 locking screws and 2 cortical screws (star headed screws) |
| 108 | Distal radius dorsal anatomical locking plates 2.4/2.7 mm, T and L shape, 4 to 6 holes with 4 locking screws and 2 cortical screws (star headed screws) |
| 109 | Radial styloid anatomical locking plates 2.4/2.7 mm, 4 to 6 holes with 4 locking screws and 2 cortical screws (star headed screws) |
| 110 | Proximal radius anatomical locking plates for fixation of radial head and neck fractures, 2.4/2.7 mm, 4 to 6 holes with 4 locking screws and 2 cortical screws (star headed screws) |
| 111 | Anatomical locking plate for wrist arthrodesis, suitable for fixation of wrist arthrodesis with or without proximal row carpectomy, 2.4/ 2.7 mm distal screw size. With 3 proximal and 3 distal screws |
| 112 | 1.5 mm cortical screws for fixation of small bones, low profile head, 8 to 16 mm length, star head (USFDA* Only) |
| 113 | 2.0 mm cortical screws for fixation of small bones, low profile head, 8 to 16 mm length, star head (USFDA* Only) |
| 114 | 2.4 mm cortical screws for fixation of small bones, low profile head, 8 to 16 mm length, star head (USFDA* Only) |
| 115 | Titanium elastic nail 1.5/2.0/2.5/3.0/3.5/4.0 mm |
| 116 | Pelvic C clamp complete |
| 117 | Radial head prosthesis (metallic/ noncemented) |
| 118 | PMMA bone cement low viscosity 20 gm (USFDA* Only) |
| 119 | PMMA bone cement low viscosity 40 gm (USFDA* Only) |
| 120 | PMMA Bone cement with antibiotics 20gm (USFDA* Only) |
| 121 | PMMA bone cement with antibiotics 40gm (USFDA* Only) |
| 122 | Disposable gamma irradiated gown set - each containing 5 gowns, 4 large drapes and stockinette each |
| 123 | Disposable gamma irradiated , impervious kit of drapes for hip and knee surgery (replacement) containing (sterile stockinette, O drapes/ U drape, screen cover, polydrape sheet, drape sheet 1 X 1metre) |
| 124 | Adjustable hard cervical collar |
| 125 | Kramer wire splints (misc sizes) |
| 126 | Synthetic plaster cast bandages 3/ 4\" |
| 127 | Synthetic plaster cast bandages6\" |
| 128 | Stockinette for upper limb |
| 129 | Stockinette for lower limb |
| 130 | Esmarch bandage 4\" |
| 131 | Esmarch bandage6\" |
| 132 | Foam skin traction kit with crepe bandage and Nylon rope |
| 133 | Head halter traction kit (including spreader and nylon rope) |
| 134 | Kirschner wires 0.9/1.0 mm, diameter, 4\" length, both ends sharp |
| 135 | Kirschner wires1.2mm, diameter, 6\" length, both ends sharp |
| 136 | Kirschner wires1.5mm, diameter, 6\" length, both ends sharp |
| 137 | Kirschner wires 2mm, diameter, 6\" length, both ends sharp |
| 138 | Kirschner wires 2.5mm, diameter, 6/9\" length, both ends sharp |
| 139 | Kirschner wires, 3mm diameter, 6/9\" length, both ends sharp |
| 140 | Spool of Stainless steel malleable wire 16 to 22 G |
| 141 | Bone wax |
| 142 | Gigli saw wire |
| 143 | Gentamicin impregnated sterilized cement beads (chain of 10 beads) |
| 144 | Gentamicin impregnated sterilized cement beads (chain of 30 beads) |
| 145 | Non-absorbable, sterile surgical suture composed of polypropylene, pigment to enhance visibility. 8-0. Round body needle |
| 146 | Non-absorbable, braided, coated, sterile, surgical suture composed of Poly (ethylene terephthalate).No.2 |
| 147 | Non-absorbable, braided, coated, sterile, surgical suture composed of Poly (ethylene terephthalate). No.5 |
| 148 | Sterile disposable covers for image intensifier |
| 149 | Normal saline bottles for arthroscopy (3L) |
| 150 | Cautery leads with tips for cutting and coagulation (Compatible with covidien) |
| 151 | Sterile cling drape |
| 152 | Betadine impregnated sticking drape for orthopedicimplant surgery(medium size) |
| 153 | Betadine impregnated sticking drape for orthopedicimplant surgery (large size) |
| 154 | Orthopedic gloves with following specifications- At-least 0.330mm thick for increased protection, Textured surface for better grip, Ease of donning, Dull colour to reduce glare, Great flexibility and elasticity, Latex, Powder free polymer coated inner surface |
| 155 | Disposable impervious surgical gowns with back flap completely covering the back of the surgeon (mediumsize) |
| 156 | Disposable impervious surgical gowns with back flap completely covering the back of the surgeon (large size) |
| 157 | Disposable impervious surgical gowns with back flap completely covering the back of the surgeon (extra large size) |
| 158 | Sterile TURP set (irrigation set used during arthroscopy) |
| 159 | Sterile camera cover |
| 160 | Fibre wire suture no 2 |
| 161 | Fibre wire suture no 5 |
| 162 | Silicon rods (size 4 and 5 mm) for two stage flexor tendon reconstruction. |
| 163 | Constrained Silicon elastomer joint replacement device for MCP joint |
| 164 | Constrained Silicon elastomer joint replacement device for PIP joint |
