Tender For Carrying Out Various Electric Works On Semi Turn Key Basis For System Strengthening In Municipal Area In The Area Of Ee, Eudd Ii, Mathura Under The Jurisdiction Of Se, Eudc, Mathura, mathura-Uttar Pradesh

Tender For Carrying Out Various Electric Works On Semi Turn Key Basis For System Strengthening In Municipal Area In The Area Of Ee, Eudd Ii, Mathura Under The Jurisdiction Of Se, Eudc, Mathura- Cartage Of Following Material From Store Centre, Mathura To Work Site. 2 St Pole ( 11 Mtr. Long ) ( Bottom Portion Galvanized ) 3 Pcc Pole ( 8.5 Mtr. Long ) 4 St Pole Pole ( 13 Mtr. Long ) ( Bottom Portion Galvanized ) 5 11 / 0.43 Kv 400 Kva T / F 6 11 / 0.43 Kv 250 Kva T / F. 7 11 / 0.43 Kv 100 Kva T / F. 8 11 / 0.43 Kv 63 Kva T / F. 9 Lt Aerial Bunch Conductor. 3X120 Sq.Mm. 10 Lt Xlpe Cable Al 1X400 Sq.Mm. 11 Lt Pvc Cable 1X630 Sq.Mm. 12 Lt Pvc Cable 1X400 Sq.Mm. 13 Al Xlpe Cable 1X630 Sq.Mm. 14 Al. Xlpe 1X400 Sqmm. Cable 15 Al. Xlpe 1X240 Sqmm. Cable 16 Lt Pvc Cable 3.5X150sq.Mm. 17 Lt Pvc Cable 3.5X240sq.Mm. 18 Lt Pvc Cable 3.5X70sq.Mm. 19 33 Kv Xlpe Cable 3X300 Sq.Mm. 20 11 Kv Xlpe Cable 3X185 Sq.Mm. 21 11 Kv Xlpe Cable 3X70 Sq.Mm. 22 2Cx10 Sq.Mm. Armoured Cable 23 4X10 Sq.Mm. Armoured Cable With Catenary Arrangement 24 Indoor Cable Jointing Kit I / D 11 Kv 3X185 Sq.Mm. 25 Outdoor Cable Jointing Kit O / D 11 Kv 3X185 Sq.Mm. 26 Straight Through For 11 Kv 3X185 Sq.Mm. 27 Outdoor Cable Jointing Kit O / D 11 Kv 3X70 Sq.Mm. 28 Outdoor Cable Jointing Kit O / D 33 Kv 3X300 Sq.Mm. 29 Acsr Ins. Weasel Conductor 30 Acsr Weasel Conductor 31 Acsr Dog Conductor 32 D.O. Fuse Set For 11 Kv 33 Cartage Of Above Material Like Various Size 33 Kv, 11 Kv Cable, Dog / Weasel Conductor, Jointing Kit, Vaccume Interrupter, Distribution Transformers, St / Pcc Pole, Vcb, Insulator, Disc. Fitting, Control Panel, Pin Insulator, Bus Isolator, Line Isolator, Bus Coupler, Brass Glands, Channel, Clamps Etc. From Store Center, Mathura To Work Site And Dismentled Material From Site To Dvvnl Store. 34 Digging Of Pit & Erection Of New Single Support St Pole ( 13 / 11 Mtr. Long ) Including Grouting Of Pole And Fixing Of All Clamps, Cross Arm, Pin / Disc Insulator & Other Accessories With Providing Stone Pad As Per Relevant Drawings. Any Fabrication If Required For Above Support. 35 Digging Of Pit & Erection Of New Double Pole Structure St Pole ( 13 / 11 Mtr. Long ) Including Grouting Of Pole And Fixing Of All Sturucture Accessories, Clamps, Cross Arm, Pin / Disc Insulator & Other Accessories With Providing Stone Pad As Per Relevant Drawings. Any Fabrication If Required For Above Support. 36 Earthing Of St / Pcc Pole / Body Earthing Of T / F. By M.S Earth Rod. 37 Providing & Fixing Of Ms Nut, Bolt And WasherS 38 Providing & Painting Of St Pole With Aluminum Paint And Red Oxide. 39 Digging Of Pit & Erection Of Stay Rod With Grouting Cement Sand And Brick Ballast Including Nuzzling, Binding Complete. ( Stay Insulator Providing By Contractor ) 40 Filling & Fixing Of 11 Kv Indoor Type Cable Jointing Kit For 11 Kv 3X185 Sqmm.Xlpe Cable 41 Filling & Fixing Of 11 Kv Outdoor Type Cable Jointing Kit For 11 Kv 3X185 Sqmm.Xlpe Cable 42 Filling & Fixing Of 11 Kv Cable Jointing Kit ( Straoght Through ) For 11 Kv 3X185 Sqmm.Xlpe Cable 43 Filling & Fixing Of 11 Kv Outdoor Type Cable Jointing Kit For 11 Kv 3X70 Sqmm.Xlpe Cable 44 Filling & Fixing Of 33 Kv Indoor Type Cable Jointing Kit For 33 Kv 3X300 Sqmm.Xlpe Cable 45 Sagging Of Weasel / Dog Conductor On Erected Poles. 46 Sagging / Jumpering Of Ins. Weasel / Dog Conductor 47 Digging Of Trenchby Making Pits / Open Trench Method / Hdd Method After Due Survey With The Help Of Utility Detector Of Existing Electrical / Telephonic Cable / And Other Utilites Of Public Utilites Departmentand Laying , Testing, Commisiong & Energization Of Cables Of 33 Kv / 11 Kv Xlpe Double Ckt. Cable By Manual Drill ( By Making Moles ) / Hdd Method / Open Trench Including All Material Like Brick & Sand And Back Filling And Restoring The Road To Make As Original. 48 Sagging & Laying Of 33 / 11 Kv Xlpe Cable In Double Pole Structure / Loop Etc. 49 Laying Of Laying Of2c / 10 Sq.Mm. Armoured Cable 50 Laying Of 4X10 Xlpe Armoured Cable With Catenary Arrange Ment 51 Digging Of Trenchby Making Pits / Open Trench Method / Hdd Method After Due Survey With The Help Of Utility Detector Of Existing Electrical / Telephonic Cable / And Other Utilites Of Public Utilites Departmentand Laying , Testing, Commisiong & Energization Of Cables Of Lt Xlpe / Pvc / Al. Double Ckt. Cable By Manual Drill ( By Making Moles ) / Hdd Method / Open Trench Including All Material Like Brick & Sand And Back Filling And Restoring The Road To Make As Original. 52 Sagging & Laying Of Lt Cable 3.5X150 / 240Sq.Mm. 53 Laying Of Lt Abc 3X120 Sq.Mm. Cable 54 Laying Lt Xlpe Cable Al 1X400 Sq.Mm. 55 Laying Lt Pvc Cable 1X630 Sq.Mm. 56 Laying Lt Pvc Cable 1X400 Sq.Mm. 57 Laying Al Xlpe Cable 1X630 Sq.Mm. 58 Laying Al. Xlpe 1X400 Sqmm. Cable 59 Laying Al. Xlpe 1X240 Sqmm. Cable 60 Guarding Of 33Kv / 11 Kv Line. ( Including G.I. Wire And Other Related Items ) 61 Providing And Fixing Of 11 Kv Holding Clamp For St Pole 62 Providing & Fixing Of G.I. Pipe 4 / 6 Dia 63 Providing & Fixing Of Clamp For G.I. Pipe 64 Providing & Fixing Of Guarding Angle For 33 / 11 Kv 65 Providing & Fixing Of I Bolt For Guarding 66 Providing & Fixing Of Aluminium Biding Wire For Guarding 67 Providing & Fixing Of Clamp For Guarding Angle For 11 Kv Line 68 Providing & Fixing Of Cable End Termination Using Total Double Compression Brass Glands For 3.5X70 Sq.Mm. Xlpe Cable 69 Providing & Fixing Of Cable End Termination Using Total Double Compression Brass Glands For 3.5X150 Sq.Mm. Xlpe Cable 70 Providing & Fixing Ofcable End Termination Using Total Double Compression Brass Glands For 3.5X240 Sq.Mm. Xlpe Cable 71 A-1 Type Distribution Panel With Ats Switch & Controller 800 Amp.Supply &Erectionoffactory Fabricated&Wired Metalcladdustandverminprooffloormounting Double Door Type Outdoor Application, With M.S.Channel Base With Bottom And Top Cable Entries Shall Be Detachable Type Gland Plateelectricalcontrolpanelwithtpnacb ( 65 Ka, 4Pole Elect Draw Out , Micro Processer Release Icu=Icw=Ics 1Sec ) With Short Circuit Protectionand TpnmccbS ( Fourpole50kawith Thermalmagneticrelease With Adjustable Over Current And Short Circuit Protection, Ics=100% Icu, Suitable For 415 V Ac ) Switchesandinstrument Chamber Etc. Complete In All Respects. The Instrument Chamber Shallbeseparate And Incoming Section Connecting With Proper Horizontal / Vertical Busbar And Outgoing Section With Cable Alley Sectionandshall Metering With Digital Multifunction Meter With Inbuilt Selector Switches, Instrument Fuses, Red Yellow And Blue Phase Indicators In Incoming Section, Currenttransformeretc.The Boardshallhave Suitablecapacity Electrolyticaluminumbusbarsas Peris8623insulatedwithheatshrink Color Codesleeveand Mounted On Non Hygroscopic Supports Such As Cmc / Dmc Support With Detachable Side Covers And Shall Be Suitable For Extension On The Sides. The Switches Entryboxesshallbecompletewithsuitablecable End Boxes. ( Incoming : 1250Ampacb1 Noand Outgoing 400 Amp Mccb 6 Nos And 250 Amp Mccb 2 Nos With Extended Rotary Handel, Spreder Set , Phase Barrier Etc ) Theswitchboardshallbe Fabricated With Galvanized Primesheet With A Minimum Thickness Of 1.6 Mm / 2Mm. With Seven Tank Process Powder Coated Switchgear.The Jobincludesthe Disconnecting Anddismantling Of Existing A-1 Type Distribution Panel Including Of Complete Replace Old Burn Cables Ends And Joint New Cable With Cable Jointers, Luges, Double Compression Glands, Etc New Cables Will Joint As Per Connected Sizes In Incoming And Outgoing Sections, The Grounding Ofthe Panel Boardas Per Directionsofengineer-Incharge. 72 A-2 Type Distribution Panel With Ats Switch & Controller 630 Amp.Supply &Erracetionoffactory Fabricated&Wired Metalcladdustandverminprooffloormounting Double Door Type Outdoor Application, With M.S. Channel Base With Bottom And Top Cable Entreis Shall Be Detachable Type Gland Plateelectricalcontrolpanelwith TpnmccbS ( Fourpole50kawith Thermalmagnaticrelease With Adjustable Over Current And Short Circuit Protection, Ics=100% Icu, Suitable For 415 V Ac ) Switchesandinstrument Chamber Etc.Complete In All Respects. The Instrument Chamber Shallbeseparate And Incomming Section Connecting With Proper Horizental / Vertical Busbar And Outgoing Section Cable Alley Sectionandshall Metering With Digital Multifuncation Meter, With Inbuilt Selector Switches, Istrument Fuses, Red Yellow Band Blue Phase Indicators In In Comming Section, Currenttransormeretc.The Boardshallhave Suitablecapacity Electrolyticaluminiumbusbarsas Peris8623insulatedwithheatshrink Color Codesleevand Mounted On Non Hygroscopic Supports Such As Cmc / Dmc Support With Deteachable Side Covers And Shall Be Suitable For Extension On The Sides. The Switches Entryboxesshallbecompletewithsuitablecable End Boxes. Incoming : 800Ampacb 1 Noand Outgoing 400 Amp Mccb 02 Nos., 250 Amp Mccb 05 Nos., 100 Amp Mccb 2 Nos. With Extended Rotary Handel, Spreder Set , Phase Barrier Etctheswitchboardshallbe Fabicated With Gelvnized Primesheet With A Minimum Thickness Of 1.6 Mm / 2Mm. With Seven Tank Process Powder Coated Switchgear Make : Scheinder / Abb / Siemens / C&Sthe Jobincludesthe Disconnecting Anddismentling Of Existing A-2 Type Distribution Panel Including Of Complete Replace Old Burn Cables Ends And Joint New Cable With Cable Jointers, Luges, Double Compression Glands, Etc New Cables Will Joint As Per Connected Sizes In Incoming And Outgoing Sectionsgrounting Ofthe Panel Boardas Per Directionsofengineer-Incharge. 73 A-3 Type Distribution Panel With Ats Switch & Controller 400 Amp.Supply &Erracetionoffactory Fabricated&Wired Metalcladdustandverminprooffloormounting Double Door Type Outdoor Application, With M.S. Channel Base With Bottom And Top Cable Entreis Shall Be Detachable Type Gland Plateelectricalcontrolpanelwith TpnmccbS ( Fourpole50kawith Thermalmagnaticrelease With Adjustable Over Current And Short Circuit Protection, Ics=100% Icu, Suitable For 415 V Ac ) Switchesandinstrument Chamber Etc.Complete In All Respects. The Instrument Chamber Shallbeseparate And Incomming Section Connecting With Proper Horizental / Vertical Busbar And Outgoing Section Cable Alley Sectionandshall Metering With Digital Multifuncation Meter, With Inbuilt Selector Switches, Istrument Fuses, Red Yellow Band Blue Phase Indicators In In Comming Section, Currenttransormeretc.The Boardshallhave Suitablecapacity Electrolyticaluminiumbusbarsas Peris8623insulatedwithheatshrink Color Codesleevand Mounted On Non Hygroscopic Supports Such As Cmc / Dmc Support With Deteachable Side Covers And Shall Be Suitable For Extension On The Sides. The Switches Entryboxesshallbecompletewithsuitablecable End Boxes. Incoming : 630Ampacb- 1 Noand Outgoing 250 Amp Mccb 5 Nos And 100 Amp Mccb 2 Nos With Extended Rotary Handel, Spreder Set , Phase Barrier Etctheswitchboardshallbe Fabicated With Gelvnized Primesheet With A Minimum Thickness Of 1.6 Mm / 2Mm. With Seven Tank Process Powder Coated Switchgear Make : Scheinder / Abb / Siemens / C&Sthe Jobincludesthe Disconnecting Anddismentling Of Existing A-3 Type Distribution Panel Including Of Complete Replace Old Burn Cables Ends And Joint New Cable With Cable Jointers, Luges, Double Compression Glands, Etc New Cables Will Joint As Per Connected Sizes In Incoming And Outgoing Sectionsgrounting Ofthe Panel Boardas Per Directionsofengineer-Incharge. 74 B-3 Type Distribution Panel With Ats Switch & Controller 250 Amp.Supply &Erracetionoffactory Fabricated&Wired Metalcladdustandverminprooffloormounting Double Door Type Outdoor Application, With M.S. Channel Base With Bottom And Top Cable Entreis Shall Be Detachable Type Gland Plateelectricalcontrolpanelwith TpnmccbS ( Fourpole50kawith Thermalmagnaticrelease With Adjustable Over Current And Short Circuit Protection, Ics=100% Icu, Suitable For 415 V Ac ) Switchesandinstrument Chamber Etc.Complete In All Respects. The Instrument Chamber Shallbeseparate And Incomming Section Connecting With Proper Horizental / Vertical Busbar And Outgoing Section Cable Alley Sectionandshall Metering With Digital Multifuncation Meter, With Inbuilt Selector Switches, Istrument Fuses, Red Yellow Band Blue Phase Indicators In In Comming Section, Currenttransormeretc.The Boardshallhave Suitablecapacity Electrolyticaluminiumbusbarsas Peris8623insulatedwithheatshrink Color Codesleevand Mounted On Non Hygroscopic Supports Such As Cmc / Dmc Support With Deteachable Side Covers And Shall Be Suitable For Extension On The Sides. The Switches Entryboxesshallbecompletewithsuitablecable End Boxes.Incoming : 250 Ampmccb1 Noand Outgoing 100 Amp Mccb 04 Nos With Extended Rotary Handel, Spreder Set , Phase Barrier Etctheswitchboardshallbe Fabicated With Gelvnized Primesheet With A Minimum Thickness Of 1.6 Mm / 2Mm. With Seven Tank Process Powder Coated Switchgear Switchgear Make : Scheinder / Abb / Siemens / C&Sthe Jobincludesthe Disconnecting Anddismentling Of Existing B-3 Type Distribution Panel Including Of Complete Replace Old Burn Cables Ends And Joint New Cable With Cable Jointers, Luges, Double Compression Glands, Etc New Cables Will Joint As Per Connected Sizes In Incoming And Outgoing Sectionsgrounting Ofthe Panel Boardas Per Directionsofengineer-Incharge. 75 C Paneldisconeccting And Dismentlingof Existing C Panel And Supply, Installation Testing Commisioning Offactory Fabricated&Wired Metalcladdustandverminproof Double Door Typeoutdoor Application Stand Mounting, M.S. Channel Base Incliding Channel Stand With Bottom Cable Entreis The Panel Boardshall Havesuitablecapacity Electrolytic Alumininum Busbars Asper Is8623 Or Above Istulated With Heat Shrink Sleeving And Mounted On Nonhygroscopic Supports Such As Cmc / Bmc Support. Panel Shall Be Completewithsuitablecableendboxes, Double Compression Glands. Panel Comparment Having Special Provision For Internal Locking System For Stop The Electricity Theft The Panelboard Shall Be Fabricated With Gelvnized Prime Sheet With A Minimum Thickness Of 1.6Mm / 2Mm. With Seven Tank Process Powder Coated. Panel Haveing Proper Space For Connectingincomming And Outgoing Cable Terminations Make: Apc / Scheinder / Abb / Siemens / C&S & Complete With Insulation Of Bakelite Strip ( 08 Mm / 10 Mm ) Thickness. 76 Earthing Complete For C Type Panels By Earth Rod 77 Providing & Fixing Of Lt Acb 800 Amp Nos. 250 Amp. Output Mccb And Suitable Covering & Mounting Strucuture 78 Providing & Fixing Of Lt Acb 630 Amp Nos. 250 Amp. Output Mccb And Suitable Covering & Mounting Strucuture 79 Providing & Fixing Of Foundation Of Rmu 3 Cubic Meter 80 Pipe And Pipe Gel Earthing For R.M.U 81 Providing & Fixing Of Danger Board 82 Providing & Fixing Of Barbed Wire 83 Sagging Of Guarding G.I. Wire 84 Providing & Fixing Of Stone Pad 85 Providing & Fixing Of Boot Protection For T / F Monkey Fault 86 Providing & Fixing 16 Sqmm. Alumimum Thimble 87 Providing & Fixing Of Pvc Pipe 3 Of Diameter 88 Providing And Instllation Of 24 Volt Battery With Charger. 89 Providing & Fixing Of 33 Kv V Type Steel Cross Arm 90 Provoding & Fixing Of 11 Kv V Type Steel Cross Arm 91 Providing & Fixing Of 11 Kv Pin Insulator With Pin 92 Providing & Fixing Of 33 Kv V Type Steel Cross Arm Holding Clamp 93 Providing & Fixing Of 11 Kv V Type Steel Cross Arm Holding Clamp 94 Providing & Fixing Of 33 Kv Pin Insulator With Pin 95 Providing & Fixing Of Disc Insulator 45 Kn & 70 Kn ( T&C / B&S ) With Fitting 96 Providing & Fixing Of 33 Kv F Bracket 97 Providing & Fixing Of 11 Kv F Bracket 98 Providing & Fixing Of Packing Piece Clamp For 33 Kv / 11 Kv With Nut & Bolts 99 Providing & Fixing Of Aluminium Lug 25 Sqmm. 100 Providing & Fixing Of Aluminium Lug 70 Sqmm. 101 Providing & Fixing Of Aluminium Lug 150 Sqmm. 102 Providing & Fixing Of Aluminium Lug 240 Sqmm. 103 Providing & Fixing Of Aluminium Lug 400 Sqmm. 104 Providing & Fixing Of Aluminium Lug 630 Sqmm. 105 Providing & Fixing Of Aluminium Lug 1000 Sqmm. 106 Providing & Sagging / Fixing Of Al. Xlpe 1X1000 Sq.Mm. Cable 107 Installation Of 11 / 0.4 Kv, 400 Kva T / F Mobile Trolley 108 Providng Trolley Structure For 400 Kva T / F With Vehicle Tyre, Rim, Coupling, Trolly Hook, Earthing, Painting And Related Accessories With Complete Job 109 Supply Of G.I. Pipe Chemicalearthing Electrode 3 Mtr. Long 80 Mm Inner Dia Along With Chemical Powder And 50X6 Mm G.I. Strip With Nut, Bolt And Washer. 110 Earthing Of Power Transformer ( Urban ) By Digging Of Pit Up To Water Level Depth Approx. 90 Feet. Into The Boring 1-1 / 4 Dia Gi Pipe Of B Grade, Conforming To The Requirement Of Is Specification And Then Connecting The Top Of The Inserted Pipe And Power Transformer Body Earthing Through M.S. Strip Of Size 50X6mm With The Help Of Electric Welding Lum Sum Rate. It Includes The Cost Of All Material, Labour, Carrier Etc. Required For Proper Completion Of Work. 111 Installation Of D.O. Fuse Set Of 11 Kv 112 Supply, Install, Testing And Commisioning Of 11 Kv 630 Amps 21 Ka For 3 Sec. Sf6 Insulated, One Side Extesible, Outdoor Duty 3 Way R.M.U. Manual Operate, In Combination Of 01 Nos. Vcb Modules ( O / G ) & 2 Nos. Load Breakerswitch Modules ( I / C ) , Consitiing Of Copper Busbar In Sf6 Insulated 304 ( Non-Ferrite Non-Magnetic Grade ) Stainless Steel Enclosure Of Thickness 2.5 Mm With Manometer Fixed On The Tank. The Breaker Shall Have Mechanical On / Off Indicator With Hand Trip Device And Spring Charging, Spring Relase Coil, Auxiliary Switch Of 02 No +2Nc. The Hv Switchgerar And Control Gear Should Be Confirming To Iec-62271-100, Iec-62271-200-2003 & Iec-60694-1996. The Rmu Gas Tank Should Be Internal Arc Tested For 21 Ka For 1Second With Iac-Afl Classification For Gas Tank. The Complete Rmu Should Have Ingress Protection Of Minimum Ip54. The Rmu Design Should Support Site Replaceable Ht Cable Bushing. All The Type Test Certified As Per Iec From Third Party Lab To Be Submitted. Rmu Should Have :- 01 Nos. Micorprocessor Based Self Powered Numerical Relay With Over Current / Earth Fault & Short Circuit Protection Wiht Each Vcb Feeder. - 3Nos. Protection Ct Shall Be Of Burden 2.5 Va, Ratio 200 / 1A, Class Of Accuracy Class 5P10 For O / C And E / F Protection For Each Vcb. ( Ct Ration Is Indicative And May Vary During Detailed Engineering ) -1 No. Manometer For Each Tank-1 Nos. Voltage Passage Indicator For Each Feeder. -1 Nos. Fault Passage Indicator For Each Lbs Module.- Right Angle Boots For All The Feeder Modules- Basic Insulation Level Of Complete System Shall Be 28Kv ( Rms ) / 75Kv ( Peak ) - Vacuum Interrupter & Rmu Should Be Of Same Make For Better Life Cycle Optimization. 113 Supply, Install, Testing And Commisioning Of 11 Kv 630 Amps 21 Ka For 3 Sec. Sf6 Insulated, One Side Extesible, Outdoor Duty 4 Way R.M.U. Manual Operate, In Combination Of 02 Nos. Vcb Modules ( O / G ) & 2 Nos. Load Breakerswitch Modules ( I / C ) , Consitiing Of Copper Busbar In Sf6 Insulated 304 ( Non-Ferrite Non-Magnetic Grade ) Stainless Steel Enclosure Of Thickness 2.5 Mm With Manometer Fixed On The Tank. The Breaker Shall Have Mechanical On / Off Indicator With Hand Trip Device And Spring Charging, Spring Relase Coil, Auxiliary Switch Of 02 No +2Nc. The Hv Switchgerar And Control Gear Should Be Confirming To Iec-62271-100, Iec-62271-200-2003 & Iec-60694-1996. The Rmu Gas Tank Should Be Internal Arc Tested For 21 Ka For 1Second With Iac-Afl Classification For Gas Tank. The Complete Rmu Should Have Ingress Protection Of Minimum Ip54. The Rmu Design Should Support Site Replaceable Ht Cable Bushing. All The Type Test Certified As Per Iec From Third Party Lab To Be Submitted. Rmu Should Have :- 01 Nos. Micorprocessor Based Self Powered Numerical Relay With Over Current / Earth Fault & Short Circuit Protection Wiht Each Vcb Feeder. - 3Nos. Protection Ct Shall Be Of Burden 2.5 Va, Ratio 500 / 1A, Class Of Accuracy Class 5P10 For O / C And E / F Protection For Each Vcb. ( Ct Ration Is Indicative And May Vary During Detailed Engineering ) -1 No. Manometer For Each Tank-1 Nos. Voltage Passage Indicator For Each Feeder. -1 Nos. Fault Passage Indicator For Each Lbs Module.- Right Angle Boots For All The Feeder Modules- Basic Insulation Level Of Complete System Shall Be 28Kv ( Rms ) / 75Kv ( Peak ) - Vacuum Interrupter & Rmu Should Be Of Same Make For Better Life Cycle Optimization. 114 Supply, Install, Testing And Commisioning Of 11 Kv 630 Amps 21 Ka For 3 Sec. Sf6 Insulated, One Side Extesible, Outdoor Duty 5 Way R.M.U. Manual Operate, In Combination Of 03 Nos. Vcb Modules ( O / G ) & 2 Nos. Load Breakerswitch Modules ( I / C ) , Consitiing Of Copper Busbar In Sf6 Insulated 304 ( Non-Ferrite Non-Magnetic Grade ) Stainless Steel Enclosure Of Thickness 2.5 Mm With Manometer Fixed On The Tank. The Breaker Shall Have Mechanical On / Off Indicator With Hand Trip Device And Spring Charging, Spring Relase Coil, Auxiliary Switch Of 02 No +2Nc. The Hv Switchgerar And Control Gear Should Be Confirming To Iec-62271-100, Iec-62271-200-2003 & Iec-60694-1996. The Rmu Gas Tank Should Be Internal Arc Tested For 21 Ka For 1Second With Iac-Afl Classification For Gas Tank. The Complete Rmu Should Have Ingress Protection Of Minimum Ip54. The Rmu Design Should Support Site Replaceable Ht Cable Bushing. All The Type Test Certified As Per Iec From Third Party Lab To Be Submitted. Rmu Should Have :- 01 Nos. Micorprocessor Based Self Powered Numerical Relay With Over Current / Earth Fault & Short Circuit Protection Wiht Each Vcb Feeder. - 3Nos. Protection Ct Shall Be Of Burden 2.5 Va, Ratio 500 / 1A, Class Of Accuracy Class 5P10 For O / C And E / F Protection For Each Vcb. ( Ct Ration Is Indicative And May Vary During Detailed Engineering ) -1 No. Manometer For Each Tank-1 Nos. Voltage Passage Indicator For Each Feeder. -1 Nos. Fault Passage Indicator For Each Lbs Module.- Right Angle Boots For All The Feeder Modules- Basic Insulation Level Of Complete System Shall Be 28Kv ( Rms ) / 75Kv ( Peak ) - Vacuum Interrupter & Rmu Should Be Of Same Make For Better Life Cycle Optimization. 115 Supply &Erection Offactory Fabricated&Wired Metalcladdustandverminprooffloormounting Double Door Type Outdoor Application, With M.S. Channel Base With Bottom And Top Cable Entreis Shall Be Detachable Type Gland Plateelectricalcontrolpanelwith 01 No. 630 Amp. Acb& 03 No. 250 Amp. Mccb The Instrument Chambershallbeseparate And Incomming Section Connecting With Proper Horizental / Vertical Busbar And Outgoing Section With Cable Alley Sectionandshall Metering With Digital Multifuncation Meter With Inbuilt Selector Switches, Istrument Fuses, Red Yellow And Blue Phase Indicators In Incomming Section, Currenttransormeretc.The Boardshallhave Suitablecapacity Electrolyticaluminiumbusbarsinsulatedwithheatshrink Color Codesleevand Mounted On Non Hygroscopic Supports Such As Cmc / Dmc Support With Deteachable Side Covers And Shall Be Suitable For Extension On The Sides. The Switches Entryboxesshallbecompletewithsuitablecable End Boxestheswitchboardshallbe Fabicated With Gelvnized Primesheet With A Minimum Thickness Of 1.6 Mm / 2Mm. With Seven Tank Process Powder Coated 116 Supply &Erection Offactory Fabricated&Wired Metalcladdustandverminprooffloormounting Double Door Type Outdoor Application, With M.S. Channel Base With Bottom And Top Cable Entreis Shall Be Detachable Type Gland Plateelectricalcontrolpanelwith 01 No. 800 Amp. Acb& 01 No. 400 Amp. Mccb & 02 No. 250 Amp. Mccbthe Instrument Chambershallbeseparate And Incomming Section Connecting With Proper Horizental / Vertical Busbar And Outgoing Section With Cable Alley Sectionandshall Metering With Digital Multifuncation Meter With Inbuilt Selector Switches, Istrument Fuses, Red Yellow And Blue Phase Indicators In Incomming Section, Currenttransormeretc.The Boardshallhave Suitablecapacity Electrolyticaluminiumbusbarsinsulatedwithheatshrink Color Codesleevand Mounted On Non Hygroscopic Supports Such As Cmc / Dmc Support With Deteachable Side Covers And Shall Be Suitable For Extension On The Sides. The Switches Entryboxesshallbecompletewithsuitablecable End Boxestheswitchboardshallbe Fabicated With Gelvnized Primesheet With A Minimum Thickness Of 1.6 Mm / 2Mm. With Seven Tank Process Powder Coated 117 Supply &Erection Offactory Fabricated&Wired Metalcladdustandverminprooffloormounting Double Door Type Outdoor Application, With M.S. Channel Base With Bottom And Top Cable Entreis Shall Be Detachable Type Gland Plateelectricalcontrolpanelwith 01 No. 1250 Amp. Acb, 02 No. 400 Amp. Mccb & 02 No. 250 Amp. Mccbthe Instrument Chambershallbeseparate And Incomming Section Connecting With Proper Horizental / Vertical Busbar And Outgoing Section With Cable Alley Sectionandshall Metering With Digital Multifuncation Meter With Inbuilt Selector Switches, Istrument Fuses, Red Yellow And Blue Phase Indicators In Incomming Section, Currenttransormeretc.The Boardshallhave Suitablecapacity Electrolyticaluminiumbusbarsinsulatedwithheatshrink Color Codesleevand Mounted On Non Hygroscopic Supports Such As Cmc / Dmc Support With Deteachable Side Covers And Shall Be Suitable For Extension On The Sides. The Switches Entryboxesshallbecompletewithsuitablecable End Boxestheswitchboardshallbe Fabicated With Gelvnized Primesheet With A Minimum Thickness Of 1.6 Mm / 2Mm. With Seven Tank Process Powder Coated 118 Providing & Fixing Of Dead End Clamp With I-Hook 119 Providing & Fixing Of Suspension Clamp With I- Hook 120 Providing & Fixing Of Piercing Clamp 121 Installation Of Lt Distribution Box 122 Providing & Fixing Of Pvc Pipe 2 Of Diameter 123 Providing & Fixing Of Clamp For Distribution Box 124 Concreting Of Pole ( St 13 Mtr. / 11 Mtr. ) Pcc Pole 125 Providing And Fixing / Installation Of Compact Substation T / F Of 400 Kva Including All Relevant And Required Accessories. 126 Removal Of Old Transformer ( 250 Kva ) With All Connected Accessories From Existing Double Pole. 127 Removal Of Old Transformer ( 100 Kva ) With All Connected Accessories From Existing Double Pole. 128 Removal Of Old Transformer ( 63Kva ) With All Connected Accessories From Existing Double Pole. 129 Removal Of Old Transformer ( 25Kva ) With All Connected Accessories From Existing Double Pole. 130 Construction Of Plinth 6X6x4 Height From Ground As Per Sc ( As Per Approved Gtp ) 131 Installation Of Following Transformer On Plinth / Double Pole With All Connecting Accessories Jumering Etc. Including Carriage Of Transformers From Store Centre, Mathura To Work Site. 132 400 Kva Transformer On Plinth 133 250 Kva Transformer On Plinth 134 100 Kva Transformer On Double Pole 135 63 Kva Transformer On Double Pole 136 Providing And Installation Of Tail Less Unit Complete 137 Mash / Frp Fencing Of Sub-Station With Civil Works ( As Per Approved Gtp ) 138 Complete Pipe In Pipe Gel Earthing Of 11 / 0.4 Kv 250 / 400 Distribution Transformer By Digging Pits 6” Dia Upto 3 Mtr. Deep Including Chemical Filled Pipe In Between ( Pipe-In-Pipe ) Isi Mark B Grade & Connecting With G.I Strip Of Size 50Mm X 6Mm With Neutral / Body Of 11 / 0.4 Kv Distribution Transformer To Above Pipe-In-Pipe ( Pip ) And Filling Of Chemical Crystalline Conductive Mixture Containing Highly Conductive Material Around The ( Pipe-In-Pipe ) Up To 3 Mtr. Including Making Of Chamber At The Top Of The Earthing. Other Details Are As Below:-1.Earth Pipe Material – Mild Steel, Galvanised.2-Main Electrode Diameter – 42.4Mm.3-Auxiliary Electrode Pipe, Diameter – 76Mm.4-Wall Thickness Of Main Electrode :- 2.6Mm.5-Wall Thickness Of Auxiliary Ist Whole:- 3.2Mm.6- Length Of Earthing Electrode ( Pip ) :- 3 Meter. 139 Dismantling Of Damaged & Used Items I.E. Distribution Transformer, St / Pcc Pole, Ht / Lt Cable, Conductor ( Scrap ) & Other Accessories At Work Site And Carriage Dismantled Material From Site To Store Center, Mathura. 140 Proper Road Restoration Kaccha / Pakka ( If Required ) Rates Shall Be Acceptable, If Not Given Above For The Same Work.

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	01-Oct-2023	CORRIGENDUM 1	Date	04-10-2023
2	01-Oct-2023	CORRIGENDUM	Financial Bid	04-10-2023
3	04-Oct-2023	Corrigendum 2	Date	09-10-2023
4	09-Oct-2023	CORRIGENDUM 3	Date	12-10-2023
5	12-Oct-2023	CORRIGENDUM 4	Date	16-10-2023
6	16-Oct-2023	CORRIGENDUM 6	Date	18-10-2023
7	18-Oct-2023	CORRIGENDUM 7	Date	21-10-2023
8	21-Oct-2023	CORRIGNDUM 8	Date	25-10-2023
9	25-Oct-2023	CORRIGENDUM 8	Date	28-10-2023
10	28-Oct-2023	CORRIGENDUM 9	Date	31-10-2023
11	31-Oct-2023	Corrigendum 10	Date	03-11-2023
12	03-Nov-2023	CORRIGENDUM 11	Date	06-11-2023
13	06-Nov-2023	CORRIGENDUM 12	Date	08-11-2023

INR 5000 /-

INR 700000.0 /-

INR 6.23 Crore /-

Name of Work : Carrying out various electric works on Semi Turn-key Basis for system strengthening in Municipal area in the area of EE, EUDD-II, Mathura under the jurisdiction of SE, EUDC, Mathura.

Sl. No.	Item Description
1	Cartage of following material from Store centre, Mathura to work site.
2	ST Pole (11 mtr. Long) (Bottom Portion Galvanized)
3	PCC Pole (8.5 mtr. Long)
4	ST Pole Pole (13 mtr. Long) (Bottom Portion Galvanized)
5	11/0.43 KV 400 KVA T/F
6	11/0.43 KV 250 KVA T/F.
7	11/0.43 KV 100 KVA T/F.
8	11/0.43 KV 63 KVA T/F.
9	LT Aerial Bunch conductor. 3x120 Sq.mm.
10	LT XLPE cable AL 1X400 sq.mm.
11	LT PVC cable 1x630 sq.mm.
12	LT PVC cable 1x400 sq.mm.
13	AL XLPE cable 1x630 sq.mm.
14	AL. XLPE 1X400 sqmm. Cable
15	AL. XLPE 1X240 sqmm. Cable
16	LT PVC cable 3.5x150sq.mm.
17	LT PVC cable 3.5x240sq.mm.
18	LT PVC cable 3.5x70sq.mm.
19	33 KV XLPE Cable 3x300 Sq.mm.
20	11 KV XLPE Cable 3x185 Sq.mm.
21	11 KV XLPE Cable 3x70 Sq.mm.
22	2Cx10 Sq.mm. armoured cable
23	4x10 Sq.mm. armoured cable with catenary arrangement
24	Indoor Cable Jointing Kit I/D 11 KV 3x185 Sq.mm.
25	Outdoor Cable Jointing Kit O/D 11 KV 3x185 Sq.mm.
26	Straight Through for 11 KV 3x185 Sq.mm.
27	Outdoor Cable Jointing Kit O/D 11 KV 3x70 Sq.mm.
28	Outdoor Cable Jointing Kit O/D 33 KV 3x300 Sq.mm.
29	ACSR Ins. Weasel conductor
30	ACSR Weasel conductor
31	ACSR Dog conductor
32	D.O. Fuse Set for 11 KV
33	Cartage of above material like various size 33 KV, 11 kv cable, dog/weasel conductor, Jointing kit, vaccume interrupter, distribution transformers, ST/PCC Pole, VCB, insulator, Disc. fitting, control panel, pin insulator, bus isolator, Line isolator, Bus coupler, brass glands, channel, clamps etc. from Store Center, Mathura to work site and dismentled material from site to dvvnl store.
34	Digging of pit & erection of new single support ST Pole (13/11 mtr. long) including grouting of pole and fixing of all clamps, cross arm, pin/disc insulator & other accessories with providing stone pad as per relevant drawings. Any fabrication if required for above support.
35	Digging of pit & erection of new Double Pole Structure ST Pole (13/11 mtr. long) including grouting of pole and fixing of all Sturucture accessories, clamps, cross arm, pin/disc insulator & other accessories with providing stone pad as per relevant drawings. Any fabrication if required for above support.
36	Earthing of ST/PCC pole/Body earthing of T/F. by M.S earth rod.
37	Providing & fixing of MS Nut, Bolt and Washer"s
38	Providing & Painting of ST pole with aluminum paint and Red oxide.
39	Digging of pit & erection of Stay rod with grouting cement sand and brick ballast including Nuzzling, binding Complete. (Stay Insulator providing by contractor)
40	Filling & Fixing of 11 KV Indoor type cable Jointing Kit for 11 KV 3x185 sqmm.XLPE cable
41	Filling & Fixing of 11 KV Outdoor type cable Jointing Kit for 11 KV 3x185 sqmm.XLPE cable
42	Filling & Fixing of 11 KV cable Jointing Kit (Straoght Through) for 11 KV 3x185 sqmm.XLPE cable
43	Filling & Fixing of 11 KV Outdoor type cable Jointing Kit for 11 KV 3x70 sqmm.XLPE cable
44	Filling & Fixing of 33 KV Indoor type cable Jointing Kit for 33 KV 3x300 sqmm.XLPE cable
45	Sagging of Weasel/Dog conductor on erected poles.
46	Sagging/Jumpering of Ins. Weasel/Dog conductor
47	Digging of trenchby Making pits/open trench method/HDD method after due survey with the help of utility detector of existing electrical/telephonic cable/and other utilites of public utilites departmentand laying , Testing, Commisiong & energization of cables of 33 KV/11 kv XLPE double ckt. Cable by manual drill (by making moles) /HDD method/ open trench Including all material Like brick & sand and Back filling and restoring the road to make as original.
48	Sagging & Laying of 33/11 KV XLPE cable in Double Pole structure/Loop etc.
49	Laying of Laying of2c/10 sq.mm. armoured Cable
50	Laying of 4X10 XLPE armoured Cable With Catenary arrange ment
51	Digging of trenchby Making pits/open trench method/HDD method after due survey with the help of utility detector of existing electrical/telephonic cable/and other utilites of public utilites departmentand laying , Testing, Commisiong & energization of cables of LT XLPE/PVC/Al. double ckt. Cable by manual drill (by making moles) /HDD method/ open trench Including all material Like brick & sand and Back filling and restoring the road to make as original.
52	Sagging & Laying of LT cable 3.5x150/240sq.mm.
53	Laying of LT ABC 3X120 sq.mm. Cable
54	Laying LT XLPE cable AL 1X400 sq.mm.
55	Laying LT PVC cable 1x630 sq.mm.
56	Laying LT PVC cable 1x400 sq.mm.
57	Laying AL XLPE cable 1x630 sq.mm.
58	Laying AL. XLPE 1X400 sqmm. Cable
59	Laying AL. XLPE 1X240 sqmm. Cable
60	Guarding of 33KV/11 KV line. (including G.I. Wire and other related items)
61	Providing and Fixing of 11 KV Holding Clamp For ST Pole
62	Providing & fixing of G.I. Pipe 4"/6" dia
63	Providing & fixing of Clamp For G.I. Pipe
64	Providing & fixing of Guarding Angle for 33/11 KV
65	Providing & fixing of I Bolt for Guarding
66	Providing & fixing of Aluminium Biding Wire for Guarding
67	Providing & fixing of clamp for guarding angle for 11 KV line
68	Providing & Fixing of Cable end termination using total double compression brass glands for 3.5x70 sq.mm. XLPE Cable
69	Providing & Fixing of Cable end termination using total double compression brass glands for 3.5x150 sq.mm. XLPE Cable
70	Providing & Fixing ofCable end termination using total double compression brass glands for 3.5x240 sq.mm. XLPE Cable
71	A-1 Type Distribution Panel with ATS Switch & Controller 800 Amp. Supply &Erectionoffactory fabricated&wired metalcladdustandverminprooffloormounting double door type outdoor application, with M.S.Channel Base with bottom and top cable entries shall be detachable type gland plateElectricalcontrolpanelwithTPNACB(65 KA,4Pole Elect draw out , Micro processer Release icu=icw=ics 1sec) with short circuit protectionand TPNMCCB"s(FourPole50KAwith thermalmagneticrelease with Adjustable Over Current and Short Circuit Protection, Ics=100% Icu, suitable for 415 V AC)Switchesandinstrument chamber etc. complete in all respects. The instrument chamber shallbeseparate and incoming section connecting with proper horizontal /vertical busbar and outgoing section with cable alley sectionandshall metering with digital multifunction meter with inbuilt Selector switches,instrument fuses, red yellow and blue phase indicators in incoming section, currenttransformeretc.The Boardshallhave suitablecapacity electrolyticaluminumbusbarsas perIS8623insulatedwithheatshrink color codesleeveand mounted on non hygroscopic supports such as CMC/ DMC support with detachable side covers and shall be suitable for extension on the sides. The switches entryboxesshallbecompletewithsuitablecable end boxes. (INCOMING : 1250AmpACB1 Noand OUTGOING 400 AMP MCCB 6 NOS AND 250 AMP MCCB 2 NOS WITH EXTENDED ROTARY HANDEL,SPREDER SET ,PHASE BARRIER etc) Theswitchboardshallbe fabricated with galvanized primesheet with a minimum thickness of 1.6 mm/2mm. with seven tank process powder coated SWITCHGEAR. The Jobincludesthe disconnecting anddismantling of existing A-1 type distribution panel including of complete replace old burn cables ends and joint new cable with cable jointers, luges, double compression glands, etc new cables will joint as per connected sizes in incoming and outgoing sections, the grounding ofthe panel boardas per directionsofEngineer-incharge.
72	A-2 Type Distribution Panel with ATS Switch & Controller 630 Amp. Supply &Erracetionoffactory fabricated&wired metalcladdustandverminprooffloormounting double door type outdoor application,with M.S. Channel Base with bottom and top cable entreis shall be detachable type gland plateElectricalcontrolpanelwith TPNMCCB"s(FourPole50KAwith thermalmagnaticrelease with Adjustable Over Current and Short Circuit Protection, Ics=100% Icu, suitable for 415 V AC)Switchesandinstrument chamber etc.complete in all respects. The instrument chamber shallbeseparate and incomming section connecting with proper horizental /vertical busbar and outgoing section cable alley sectionandshall metering with digital multifuncation meter, with inbuilt Selector switches,istrument fuses, red yellow band blue phase indicators in in comming section, currenttransormeretc.The Boardshallhave suitablecapacity electrolyticaluminiumbusbarsas perIS8623insulatedwithheatshrink color codesleevand mounted on non hygroscopic supports such as CMC/ DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches entryboxesshallbecompletewithsuitablecable end boxes. INCOMING : 800AmpACB 1 Noand OUTGOING 400 AMP MCCB 02 Nos., 250 AMP MCCB 05 Nos., 100 AMP MCCB 2 Nos. WITH EXTENDED ROTARY HANDEL,SPREDER SET ,PHASE BARRIER etcTheswitchboardshallbe fabicated with gelvnized primesheet with a minimum thickness of 1.6 mm/2mm. with seven tank process powder coated SWITCHGEAR MAKE : SCHEINDER/ABB/SIEMENS/C&S The Jobincludesthe disconnecting anddismentling of existing A-2 type distribution panel including of complete replace old burn cables ends and joint new cable with cable jointers, luges, double compression glands,etc new cables will joint as per connected sizes in incoming and outgoing sectionsgrounting ofthe panel boardas per directionsofEngineer-incharge.
73	A-3 Type Distribution Panel with ATS Switch & Controller 400 Amp. Supply &Erracetionoffactory fabricated&wired metalcladdustandverminprooffloormounting double door type outdoor application,with M.S. Channel Base with bottom and top cable entreis shall be detachable type gland plateElectricalcontrolpanelwith TPNMCCB"s(FourPole50KAwith thermalmagnaticrelease with Adjustable Over Current and Short Circuit Protection, Ics=100% Icu, suitable for 415 V AC)Switchesandinstrument chamber etc.complete in all respects. The instrument chamber shallbeseparate and incomming section connecting with proper horizental /vertical busbar and outgoing section cable alley sectionandshall metering with digital multifuncation meter, with inbuilt Selector switches,istrument fuses, red yellow band blue phase indicators in in comming section, currenttransormeretc.The Boardshallhave suitablecapacity electrolyticaluminiumbusbarsas perIS8623insulatedwithheatshrink color codesleevand mounted on non hygroscopic supports such as CMC/ DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches entryboxesshallbecompletewithsuitablecable end boxes. INCOMING : 630AmpACB- 1 Noand OUTGOING 250 AMP MCCB 5 NOS AND 100 AMP MCCB 2 NOS WITH EXTENDED ROTARY HANDEL,SPREDER SET ,PHASE BARRIER etcTheswitchboardshallbe fabicated with gelvnized primesheet with a minimum thickness of 1.6 mm/2mm. with seven tank process powder coated SWITCHGEAR MAKE : SCHEINDER/ABB/SIEMENS/C&S The Jobincludesthe disconnecting anddismentling of existing A-3 type distribution panel including of complete replace old burn cables ends and joint new cable with cable jointers, luges, double compression glands,etc new cables will joint as per connected sizes in incoming and outgoing sectionsgrounting ofthe panel boardas per directionsofEngineer-incharge.
74	B-3 Type Distribution Panel with ATS Switch & Controller 250 Amp. Supply &Erracetionoffactory fabricated&wired metalcladdustandverminprooffloormounting double door type outdoor application,with M.S. Channel Base with bottom and top cable entreis shall be detachable type gland plateElectricalcontrolpanelwith TPNMCCB"s(FourPole50KAwith thermalmagnaticrelease with Adjustable Over Current and Short Circuit Protection, Ics=100% Icu, suitable for 415 V AC)Switchesandinstrument chamber etc.complete in all respects. The instrument chamber shallbeseparate and incomming section connecting with proper horizental /vertical busbar and outgoing section cable alley sectionandshall metering with digital multifuncation meter, with inbuilt Selector switches,istrument fuses, red yellow band blue phase indicators in in comming section, currenttransormeretc.The Boardshallhave suitablecapacity electrolyticaluminiumbusbarsas perIS8623insulatedwithheatshrink color codesleevand mounted on non hygroscopic supports such as CMC/ DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches entryboxesshallbecompletewithsuitablecable end boxes.INCOMING : 250 AmpMCCB1 Noand OUTGOING 100 AMP MCCB 04 NOS WITH EXTENDED ROTARY HANDEL,SPREDER SET ,PHASE BARRIER etcTheswitchboardshallbe fabicated with gelvnized primesheet with a minimum thickness of 1.6 mm/2mm. with seven tank process powder coated switchgear SWITCHGEAR MAKE : SCHEINDER/ABB/SIEMENS/C&S The Jobincludesthe disconnecting anddismentling of existing B-3 type distribution panel including of complete replace old burn cables ends and joint new cable with cable jointers, luges, double compression glands,etc new cables will joint as per connected sizes in incoming and outgoing sectionsgrounting ofthe panel boardas per directionsofEngineer-incharge.
75	C Panel Disconeccting and dismentlingof existing C panel and Supply,installation testing commisioning offactory fabricated&wired metalcladdustandverminproof double door typeoutdoor application stand mounting, M.S. Channel Base incliding channel stand with bottom cable entreis The panel boardshall havesuitablecapacity electrolytic alumininum busbars asper IS8623 or above istulated with heat shrink sleeving and mounted on nonhygroscopic supports such as CMC/BMC support. panel shall be completewithsuitablecableendboxes, double compression glands. panel comparment having special provision for internal locking system for stop the electricity theft The panelboard shall be fabricated with gelvnized prime sheet with a minimum thickness of 1.6mm/2mm. with seven tank process powder coated. panel haveing proper space for connectingincomming and outgoing cable terminations MAKE: APC/SCHEINDER/ABB/SIEMENS/C&S & Complete with insulation of bakelite strip(08 mm/10 mm) thickness.
76	Earthing Complete for C Type Panels by earth rod
77	Providing & fixing of Lt ACB 800 Amp Nos. 250 Amp. Output MCCB and suitable covering & mounting strucuture
78	Providing & fixing of Lt ACB 630 Amp Nos. 250 Amp. Output MCCB and suitable covering & mounting strucuture
79	Providing & fixing of Foundation of RMU 3 Cubic Meter
80	Pipe and Pipe gel Earthing for R.M.U
81	Providing & fixing of Danger Board
82	Providing & fixing of Barbed Wire
83	Sagging of Guarding G.I. Wire
84	Providing & fixing of Stone Pad
85	Providing & fixing of Boot Protection For T/F Monkey Fault
86	Providing & fixing 16 sqmm. Alumimum thimble
87	Providing & Fixing of PVC Pipe 3" of diameter
88	Providing and Instllation of 24 Volt Battery with Charger.
89	Providing & Fixing of 33 KV V type Steel Cross Arm
90	Provoding & Fixing of 11 KV V type Steel Cross Arm
91	Providing & Fixing of 11 KV Pin Insulator with pin
92	Providing & Fixing of 33 KV V type Steel Cross Arm Holding Clamp
93	Providing & Fixing of 11 KV V type Steel Cross Arm Holding Clamp
94	Providing & Fixing of 33 KV Pin Insulator with pin
95	Providing & Fixing of Disc Insulator 45 KN & 70 KN (T&C/B&S) with fitting
96	Providing & fixing of 33 KV F Bracket
97	Providing & fixing of 11 KV F Bracket
98	Providing & fixing of Packing Piece Clamp for 33 KV/11 KV with nut & bolts
99	Providing & fixing of Aluminium Lug 25 sqmm.
100	Providing & fixing of Aluminium Lug 70 sqmm.
101	Providing & fixing of Aluminium Lug 150 sqmm.
102	Providing & fixing of Aluminium Lug 240 sqmm.
103	Providing & fixing of Aluminium Lug 400 sqmm.
104	Providing & fixing of Aluminium Lug 630 sqmm.
105	Providing & fixing of Aluminium Lug 1000 sqmm.
106	Providing & Sagging/Fixing of Al. XLPE 1x1000 Sq.mm. Cable
107	Installation of 11/0.4 KV, 400 KVA T/F Mobile Trolley
108	Providng Trolley Structure for 400 KVA T/F with vehicle tyre,rim,coupling,trolly hook,earthing, painting and related accessories with complete job
109	Supply of G.I. Pipe Chemicalearthing electrode 3 mtr. long 80 mm inner dia along with chemical powder and 50x6 mm G.I. Strip with Nut, Bolt and Washer.
110	Earthing of Power Transformer (Urban) by digging of pit up to water level depth Approx. 90 feet. into the boring 1-1/4" dia GI pipe of "B" grade,conforming to the requirement of IS specification and then connecting the top of the inserted pipe and Power Transformer body earthing through M.S. strip of size 50x6mm with the help of Electric welding Lum Sum Rate. It includes the cost of all material, labour, Carrier etc. required for proper completion of work.
111	Installation of D.O. Fuse Set of 11 KV
112	Supply, install, testing and commisioning of 11 KV 630 Amps 21 KA for 3 Sec. SF6 insulated, one side extesible, outdoor duty 3 way R.M.U. manual operate, in combination of 01 nos. VCB modules (O/G) & 2 Nos. Load BreakerSwitch modules (I/C), CONSITIING OF COPPER BUSBAR in SF6 insulated 304 (Non-Ferrite Non-Magnetic Grade) stainless steel enclosure of thickness 2.5 mm with manometer fixed on the tank. the breaker shall have mechanical ON/OFF indicator with hand Trip device and spring charging, spring relase coil, auxiliary switch of 02 NO +2NC. The HV switchgerar and control gear should be confirming to IEC-62271-100, IEC-62271-200-2003 & IEC-60694-1996. The RMU gas tank should be internal arc tested for 21 KA for 1Second with IAC-AFL classification for gas tank. The complete RMU Should have ingress protection of minimum IP54. The RMU design should support site replaceable HT cable bushing. All the type test certified as per IEC from Third party lab to be submitted. RMU should have :- 01 Nos. micorprocessor based self powered numerical relay with over Current/earth fault & short circuit protection wiht each VCB feeder. - 3Nos. Protection CT Shall be of Burden 2.5 VA, ratio 200/1A, Class of Accuracy class 5P10 for O/C and E/F Protection for each VCB. (CT ration is indicative and may vary during detailed engineering) -1 No. Manometer for each tank-1 Nos. Voltage passage indicator for each feeder. -1 Nos. Fault Passage Indicator for each LBS Module.- Right angle boots for all the feeder Modules- Basic insulation level of complete system shall be 28KV(RMS)/75KV(Peak)- Vacuum Interrupter & RMU Should be of same make for better life cycle optimization.
113	Supply, install, testing and commisioning of 11 KV 630 Amps 21 KA for 3 Sec. SF6 insulated, one side extesible, outdoor duty 4 way R.M.U. manual operate, in combination of 02 nos. VCB modules (O/G) & 2 Nos. Load BreakerSwitch modules (I/C), CONSITIING OF COPPER BUSBAR in SF6 insulated 304 (Non-Ferrite Non-Magnetic Grade) stainless steel enclosure of thickness 2.5 mm with manometer fixed on the tank. the breaker shall have mechanical ON/OFF indicator with hand Trip device and spring charging, spring relase coil, auxiliary switch of 02 NO +2NC. The HV switchgerar and control gear should be confirming to IEC-62271-100, IEC-62271-200-2003 & IEC-60694-1996. The RMU gas tank should be internal arc tested for 21 KA for 1Second with IAC-AFL classification for gas tank. The complete RMU Should have ingress protection of minimum IP54. The RMU design should support site replaceable HT cable bushing. All the type test certified as per IEC from Third party lab to be submitted. RMU should have :- 01 Nos. micorprocessor based self powered numerical relay with over Current/earth fault & short circuit protection wiht each VCB feeder. - 3Nos. Protection CT Shall be of Burden 2.5 VA, ratio 500/1A, Class of Accuracy class 5P10 for O/C and E/F Protection for each VCB. (CT ration is indicative and may vary during detailed engineering) -1 No. Manometer for each tank-1 Nos. Voltage passage indicator for each feeder. -1 Nos. Fault Passage Indicator for each LBS Module.- Right angle boots for all the feeder Modules- Basic insulation level of complete system shall be 28KV(RMS)/75KV(Peak)- Vacuum Interrupter & RMU Should be of same make for better life cycle optimization.
114	Supply, install, testing and commisioning of 11 KV 630 Amps 21 KA for 3 Sec. SF6 insulated, one side extesible, outdoor duty 5 way R.M.U. manual operate, in combination of 03 nos. VCB modules (O/G) & 2 Nos. Load BreakerSwitch modules (I/C), CONSITIING OF COPPER BUSBAR in SF6 insulated 304 (Non-Ferrite Non-Magnetic Grade) stainless steel enclosure of thickness 2.5 mm with manometer fixed on the tank. the breaker shall have mechanical ON/OFF indicator with hand Trip device and spring charging, spring relase coil, auxiliary switch of 02 NO +2NC. The HV switchgerar and control gear should be confirming to IEC-62271-100, IEC-62271-200-2003 & IEC-60694-1996. The RMU gas tank should be internal arc tested for 21 KA for 1Second with IAC-AFL classification for gas tank. The complete RMU Should have ingress protection of minimum IP54. The RMU design should support site replaceable HT cable bushing. All the type test certified as per IEC from Third party lab to be submitted. RMU should have :- 01 Nos. micorprocessor based self powered numerical relay with over Current/earth fault & short circuit protection wiht each VCB feeder. - 3Nos. Protection CT Shall be of Burden 2.5 VA, ratio 500/1A, Class of Accuracy class 5P10 for O/C and E/F Protection for each VCB. (CT ration is indicative and may vary during detailed engineering) -1 No. Manometer for each tank-1 Nos. Voltage passage indicator for each feeder. -1 Nos. Fault Passage Indicator for each LBS Module.- Right angle boots for all the feeder Modules- Basic insulation level of complete system shall be 28KV(RMS)/75KV(Peak)- Vacuum Interrupter & RMU Should be of same make for better life cycle optimization.
115	Supply &Erection offactory fabricated&wired metalcladdustandverminprooffloormounting double door type outdoor application,with M.S. Channel Base with bottom and top cable entreis shall be detachable type gland plateElectricalcontrolpanelwith 01 No. 630 Amp. ACB& 03 No. 250 Amp. MCCB The instrument chambershallbeseparate and incomming section connecting with proper horizental /vertical busbar and outgoing section with cable alley sectionandshall metering with digital multifuncation meter with inbuilt Selector switches,istrument fuses, red yellow and blue phase indicators in incomming section, currenttransormeretc.The Boardshallhave suitablecapacity electrolyticaluminiumbusbarsinsulatedwithheatshrink color codesleevand mounted on non hygroscopic supports such as CMC/ DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches entryboxesshallbecompletewithsuitablecable end boxes Theswitchboardshallbe fabicated with gelvnized primesheet with a minimum thickness of 1.6 mm/2mm. with seven tank process powder coated
116	Supply &Erection offactory fabricated&wired metalcladdustandverminprooffloormounting double door type outdoor application,with M.S. Channel Base with bottom and top cable entreis shall be detachable type gland plateElectricalcontrolpanelwith 01 No. 800 Amp. ACB& 01 No. 400 Amp. MCCB & 02 No. 250 Amp. MCCB The instrument chambershallbeseparate and incomming section connecting with proper horizental /vertical busbar and outgoing section with cable alley sectionandshall metering with digital multifuncation meter with inbuilt Selector switches,istrument fuses, red yellow and blue phase indicators in incomming section, currenttransormeretc.The Boardshallhave suitablecapacity electrolyticaluminiumbusbarsinsulatedwithheatshrink color codesleevand mounted on non hygroscopic supports such as CMC/ DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches entryboxesshallbecompletewithsuitablecable end boxes Theswitchboardshallbe fabicated with gelvnized primesheet with a minimum thickness of 1.6 mm/2mm. with seven tank process powder coated
117	Supply &Erection offactory fabricated&wired metalcladdustandverminprooffloormounting double door type outdoor application,with M.S. Channel Base with bottom and top cable entreis shall be detachable type gland plateElectricalcontrolpanelwith 01 No. 1250 Amp. ACB, 02 No. 400 Amp. MCCB & 02 No. 250 Amp. MCCB The instrument chambershallbeseparate and incomming section connecting with proper horizental /vertical busbar and outgoing section with cable alley sectionandshall metering with digital multifuncation meter with inbuilt Selector switches,istrument fuses, red yellow and blue phase indicators in incomming section, currenttransormeretc.The Boardshallhave suitablecapacity electrolyticaluminiumbusbarsinsulatedwithheatshrink color codesleevand mounted on non hygroscopic supports such as CMC/ DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches entryboxesshallbecompletewithsuitablecable end boxes Theswitchboardshallbe fabicated with gelvnized primesheet with a minimum thickness of 1.6 mm/2mm. with seven tank process powder coated
118	Providing & Fixing of Dead end clamp With I-Hook
119	Providing & Fixing of Suspension Clamp With I- Hook
120	Providing & Fixing of piercing Clamp
121	Installation of LT Distribution Box
122	Providing & Fixing of PVC Pipe 2" of diameter
123	Providing & Fixing of Clamp For Distribution Box
124	Concreting of Pole (ST 13 Mtr./11 Mtr.) PCC Pole
125	Providing and Fixing/Installation of Compact Substation T/F of 400 KVA including all relevant and required accessories.
126	Removal of old transformer(250 KVA) with all connected accessories from existing double pole.
127	Removal of old transformer(100 KVA) with all connected accessories from existing double pole.
128	Removal of old transformer(63KVA) with all connected accessories from existing double pole.
129	Removal of old transformer(25KVA) with all connected accessories from existing double pole.
130	Construction of Plinth 6x6x4 Height from ground as per sc (as per approved GTP)
131	Installation of following transformer on Plinth/Double pole with all connecting accessories jumering etc. including carriage of transformers from store centre, Mathura to work site.
132	400 KVA Transformer on Plinth
133	250 KVA Transformer on Plinth
134	100 KVA Transformer on Double Pole
135	63 KVA Transformer on Double Pole
136	Providing and Installation of Tail less unit complete
137	Mash/FRP Fencing of Sub-Station with civil works (as per approved GTP)
138	Complete Pipe in Pipe Gel earthing of 11/0.4 KV 250/400 Distribution Transformer by digging pits 6” dia upto 3 mtr. deep including chemical filled pipe in between (pipe-in-pipe) ISI mark B Grade & connecting with G.I strip of size 50mm X 6mm with neutral/body of 11/0.4 KV distribution transformer to above pipe-in-pipe (PIP) and filling of chemical crystalline conductive mixture containing highly conductive material around the (pipe-in-pipe) up to 3 Mtr. including making of chamber at the top of the earthing. Other details are as below:- 1.Earth pipe material – mild steel, Galvanised. 2-Main Electrode diameter – 42.4mm. 3-Auxiliary Electrode pipe, Diameter – 76mm. 4-Wall Thickness of main Electrode :- 2.6mm. 5-Wall thickness of auxiliary Ist whole:- 3.2mm. 6- Length of earthing electrode (PIP):- 3 Meter.
139	Dismantling of damaged & used items i.e. Distribution Transformer, ST/PCC Pole, HT/LT cable, Conductor (Scrap) & other accessories at work site and carriage dismantled material from Site to Store Center, Mathura.
140	Proper Road Restoration Kaccha/Pakka (If required) Rates shall be acceptable, if not given above for the same work.