Tender For Construction Of Bhakt Nivas To Shri Hanuman Mandir At. Makni ( Thor) Tq. Nilanga Dist. Latur ( For The Year-2022-23)
Tender Value
68.69 Lakhs
Estimated cost
Bid Submission
03 Oct 2023
0 days left
EMD
68694
Bank guarantee accepted
Document Fee
1160
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nilanga → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Bhakt Nivas To Shri Hanuman Mandir At. Makni ( Thor) Tq. Nilanga Dist. Latur ( For The Year-2022-23)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Spec.No.Bd.A.1 Page No. 259 (SSR ITEM NO. 21.02 & PAGE NO.153) |
| 2 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means Spec.No.Bd.A.2 Page No. 259 (SSR ITEM NO. 21.06 & PAGE NO.153) |
| 3 | Excavation for foundation in Hard murum and boulders including removing the excavated material upto a distance of 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Spec.No.Bd.A.3 Page No. 259 (SSR ITEM NO. 21.10 & PAGE NO.154 ) |
| 4 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec. No.Bd. E. 1 Page No. 287 (SSR ITEM NO. 24.01 & PAGE NO.175) |
| 5 | Providing and laying in situ/Ready Mixcement concreteM-20of trap / granite /quartzite/ gneissmetal for R.C.C. workin foundations like raft, strip foundations, grillage andfootings of R.C.C. columns and steel stanchionsetc. including bailing out water, formwork, laying/pumpingcover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec. No.Bd.F.3 Page No. 298 and B.7, Page No.38 (SSR ITEM NO. 25.11 & PAGE NO.230) |
| 6 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec. No.Bd.F.5 Page No. 300 and B.7, Page.No. 38 (SSR ITEM NO. 25.31 & PAGE NO.179) |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec.No.Bd.F.6 Page No. 300 and B.7, Page No.38 (SSR ITEM NO. 25.50 & PAGE NO.181) |
| 8 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec.No.Bd.F.9 Page No. 303 and B.7, Page No.38 (SSR ITEM NO. 26.05 & PAGE NO.184) |
| 9 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite / quartzite / gneiss metal for R.C.C. canopy as per detailed designs and drawings including centering, formwork, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing etc. complete (excluding reinforcement). with fully automatic micro processor based PLC with SCADAenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec.No.Bd.F.10 Page No. 304 (SSR ITEM NO. 26.11 & PAGE NO.184) |
| 10 | Providing and laying Cast in situ/Ready Mix cement concrete inM-20 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec.No.Bd. F. 13 Page No. 305 /I.S. 456 (2000 ) (SSR ITEM NO. 26.25 & PAGE NO.185) |
| 11 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Spec. No.Bd.F.17, Page No. 306 (SSR ITEM NO. 26.33 & PAGE NO.188) |
| 12 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.Spec.No.Bd.G. 1 Page No. 313 (SSR ITEM NO. 27.01 & PAGE NO.197) |
| 13 | Filling in plinth and floors withapprovedexcavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. Spec. No.Bd.A.10 Page No. 262 (SSR ITEM NO. 21.36 & PAGE NO.157) |
| 14 | Filling in plinth and floors with contractorsmaterial/brought from outside and approved by Engineer inchargein layers of 15cm. to 20cm.including watering and compaction etc. complete. Spec.No.Bd.A.11 Page No. 263 (SSR ITEM NO. 21.37 & PAGE NO.157) |
| 15 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. Spec. No.As directed by Engineer in charge. (SSR ITEM NO. 21.4 & PAGE NO.157) |
| 16 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete. Spec. No.Bd.G.5 Page No. 315 (SSR ITEM NO. 27.05 & PAGE NO.197) |
| 17 | Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete Spec.No.Bd.L.4 Page No. 368 (SSR ITEM NO. 32.06 & PAGE NO.209) |
| 18 | Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. completeSpec.No.Bd.L.4 Page No. 368 (SSR ITEM NO. 32.07 & PAGE NO.209) |
| 19 | Providing structural steel work in trusses, other similar trussed purlins and members withall bracing, gusset plates etc. as per detailed designs and drawings or as directedincluding cutting, fabricating, hoisting, erecting fixing in position, Making riveted/bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oilpainting approved quality and shade etc. complete. Spec. No.Bd.C.8 Page No. 278 (SSR ITEM NO. 23.04 & PAGE NO.173) |
| 20 | Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. Spec. No. As directed by engineer incharge Spec. No.Bd. P. I Page No. 411 ( SSR Item No.35.21P. No.225) |
| 21 | Providing and applying washable oil-bound distemper of approved colour and shade to old & new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. Spec. No.Bd.P.5 Page No. 413 (SSR ITEM NO. 36.11 & PAGE NO.227) |
| 22 | Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour tonew plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. Spec. No.Bd.O.8/Page No.406 (SSR ITEM NO. 35.15 & PAGE NO.224) |
| 23 | Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 kg/sqm) Spec. No.As directed by Engineer in charge. (SSR ITEM NO. 38.34 & PAGE NO.236) |
| 24 | providing and laying polished hand cut Kotah Stone flooring 25mm to 30mm thick and 45cm to 55cm wide in plain/diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete. Spec. No.Bd.M.3 Page No.380 (SSR ITEM NO. 33.08 & PAGE NO.213 ) |
| 25 | Providing and fixing mild steel grill gate with angle iron frame 65mmx65mmx10mm with iron bars at 150mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram/Smt. Spec. No.As directed by Engineer in charge (SSR ITEM NO. 44.10 & PAGE NO.294) |
| 26 | Providing and laying chequered tiles of approved quality of size 30cmx30cm, confirming to corresponding I.S. for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. Spec.No. Bd. M-12 page No. 385 (.SSR ITEM NO. 33.66 & PAGE NO.220) |
| 27 | Royalty charges for other minerals ( royalty + surcharge 2%) |
| 28 | .Laboratory testing charges A) BRICKS- Water Absorption , Compressive Strength, Efflorescence (Set of 5 bricks) |
| 29 | Laboratory testing charges a) compressive strength of c.c.cubes |
| 30 | MURUM-HARD- Liquid limit & plastic limit |
| 31 | STEEL BAR TESTING- Upto 16 mm (Set of 3 Bars) |
| 32 | Add 18% GST on cost of work |
| 33 | Add 1.00 % Labour insuranceon work Cost |
AI Tender Summary
Tender Timeline
Sep 27, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedOct 03, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 05, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender