Tender For Construction Of Ekdara Samajik Sabhamandap At- G.P. Ekdara Tal.Murud,Dist.Raigad
Tender Value
14.93 Lakhs
Estimated cost
Bid Submission
04 Oct 2023
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
murud → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Ekdara Samajik Sabhamandap At- G.P. Ekdara Tal.Murud,Dist.Raigad
BOQ
| Sl. No. | Item Description |
| 1 | Item No 1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means |
| 2 | Item no 2 :Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Bd. E. 1 Page One Number 287 |
| 3 | Item No. 03 Providinguncoursedrubblemasonryoftrap/granite/quartzite/gneissstonesincement mortar1:6infoundationandplinthofinnerwalls/inplinthofexternalwallsincluding bailing out water manually , striking joints on un exposed faces and watering etc.complete. |
| 4 | Item No 04: Providing andlaying Castinsitu/ReadyMixcement concrete M-15oftrap/ granite/quartzite/gneissmetalforcoping to plinthorparapet,mouldedorchamferedasper drawingorasdirectedincludingsteelcentering,plywood/steelformworkcompacting, rougheningthemifspecialfinishistobeprovided,finishingunevenandhoneycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade) |
| 5 | Item No 05: Providing flush grooved pointing with cement mortar 1:3 for stone masonry work includingscaffolding and curing etc. complete. |
| 6 | Item No6 Filling in plinth and floors withapprovedexcavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. |
| 7 | Item No.7: Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete. |
| 8 | Item No 8 Providing and fixing 6.00 mm thick ISI mark Asbestos Cement Corrugated sheet roofing including galvanised iron \"J\" or \"L\" hook bolts galvanised iron band bituminous G.I. washers, galvanised iron clamps, bolts, nuts and scaffolding etc. complete. |
| 9 | Item No 9 Providingandfixing6mmthickISImarkAsbestosCementridgecappingforroofing including galvanisediron hooks, bolts, galvanisediron andbituminous washers, galvanised iron clamps, bolts, nuts including scaffolding etc. complete. |
| 10 | Item No. 10 Providing and fixing of colour coated Zinc aluminium ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallichotdipcoatedwithAluminium-Zincalloy(55%aluminiumm43.4%zinc1.6%silicon)with COLORBOND ( R ) steel quality super durable polyster paint coat ( withinorganicpigment).Thepaint shallhave atotalcoatingthicknessofnominal35um, comprising of nominal 25um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center.Theendribshallbedesignedforanti-capacitygroove.andreturnleg.Thefeed materialshouldhave coilmanufacturersproduct detailsmarked aregular interval.including fastenerswith min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight ofprofile 4.52 Kilogram/Square Metre)900 mm girth (Surface Width). |
| 11 | Item No. 11 Providingandfixingplainzincsheetingof0.80mmthick(22B.W.G.)overtheridgehiporvalleyto galvanizedironsheetroofingincludingallfasteningandboltgalvanisedironscrewsandbolts,leadandbitumen washers etc. complete.(Weight of 6.8 Kilogram/sq.m.). |
| 12 | Item No12 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. |
| 13 | Item No.13 Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneissmetalforbedblocks,foundationblocksand suchotheritems includingbailingoutwater, Steelcentering, formwork,laying/pumping,compacting, rougheningthemifspecialfinishistobeprovided,finishingunevenandhoneycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic,tarpaulinetc.(Woodencenteringwillnotbeallowed.),withfullyautomaticmicro processor based PLC with SCADAenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 14 | Item No 14: Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc.complete. |
| 15 | Item No 15:Providing and laying Polished Tandur Stone flooring 25mm to 30mm thick required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. |
| 16 | Item No. 16 Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. |
| 17 | Item No.17: Providingandlayingceramictilesof havingsize30cm.x30cm.andconfirmingto corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. |
| 18 | Item No 18Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete |
| 19 | Item No.19Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 with neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. |
| 20 | Item No. 20: Providing sills of polished Kadappa stone 25mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. complete. |
| 21 | Item No 21 Providing and fixing mild steel grill work for windows, ventilators, etc. 15 kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. |
| 22 | Item No. 22 Providing and fixing 90 cm x 60 cm Marble plate engraving 10 cm. height letter, figures including painting the lefters/figures with approved colour and shade complete |
| 23 | Add 18% GST Charges |
| 24 | Add 1% Insurance |
| 25 | Add Royalty Charges Sand |
| 26 | Add Royalty Charges Other |
| 27 | 4) Test ofSand :- Sieve Analysis silt and clay content |
AI Tender Summary
Tender Timeline
Sep 27, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedOct 04, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 05, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender