Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 19-10-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 26-10-2023 |
| 2 | 14-10-2023 | CORRIGENDUM2 | Other | 19-10-2023 |
| 3 | 09-10-2023 | CORRIGENDUM1 | BOQ | 19-10-2023 |
| Sl. No. | Item Description |
| 1 | Schedule \"A\" |
| 2 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 3 | Demolition of cement concrete un-reinforced of any description and any position not otherwise specifically provided for complete all as specified and directed. |
| 4 | Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thick thickness below or above ground level complete all as specified and directed. |
| 5 | Taking down cement plaster on brick or stone walls etc, including raking out joints hacking for key, scrubbing down with water etc complete all as directed. |
| 6 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles and removing unserviceable materials from site of work complete all as specified and directed. |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tilesand rubbish off the premises complete all as specified and directed. |
| 8 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed. |
| 9 | Dismantling water tanks capacity exc. 500 litres and n.exc. 1000 liters and removing to store complete all as specified and directed. |
| 10 | Dismantling of plain or corrugated steel sheeting any gauge , thickness including nainital or similar pattern on roof covering or wall cladding completeall as specified and directed by Engr-in- charge. |
| 11 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover filletscomplete all as specified and directed.Note :-Dismantling of false ceiling to be carried out carefully without damaging existing fitting and fixtures of flase ceiling items |
| 12 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m eachcomplete all as specified and directed. |
| 13 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but not exc. 4 sqm eachcomplete all as specified and directed. |
| 14 | Taking up or down 15mm dia of steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed. |
| 15 | Taking up or down 20mm dia of steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed. |
| 16 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 17 | Demolition and breaking up 150mm dia drain pipes(salt glazed ware,AC ,PVC or reinforced concrete) set in cement mortar including concrete bedding and haunching complete all as specified and directed. |
| 18 | Dismantling of framed timper scantling40 sq .cm and over in section,in any position complete all as specified and directed. |
| 19 | Ditto as per here-in-above item no 17but in fillets in unframed work under 40 sq.cm in section complete all as specified and directed. |
| 20 | Dismantling of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any motar complete all as specified and directed. |
| 21 | M&L for PCC 1:3:6 type C2 (using 40mm graded broken stone agg) as in bed in drain pipe 100/110mm dia bore incl packing under and haunching incl necessary shuttering against the sides of pipes after they are laid and tested complete all as specified and directed. |
| 22 | M&L for PCC 1:3:6 type C2 (using 40mm graded broken stone agg) as in bed in drain pipe 150mm dia bore incl packing under and haunching incl necessary shuttering against the sides of pipes after they are laid and tested complete all as specified and directed. |
| 23 | M&L for RCC (Nominal Mix) Type B1, 1:2:4(using 20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 24 | M&L for providing cement concretetype B1 1:2:4 (using 20mm graded stone aggregate) as in window or door cills,lintels, bressumers,steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks,ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. nd setting in mortar complete with joints to match but in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed. |
| 25 | M&L for providing cement concretetype B1 1:2:4 (using 20mm graded stone aggregate) as in roof kerbs , bed plates , water troughs or mud stops rounded or chamfered on edges and other similar bands ,plinth coureses parpets and railing upto 60 cm in height ,and as in copings complete all as specified and directed. |
| 26 | M&L for cement concrete type D2 1:4:8 (40mm graded aggregates) in surface channel and drains etc. complete all as specified and directed. Note :- (1) Using Dimapur sand |
| 27 | M&L for Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement incl forms, molds mitred / stopped ends etc complete all as specified and directed. Note:- (1) Using Dimapur sand. |
| 28 | M&L for 75mm thick cement concrete type C2 1:3:6 using 40 mm graded stone aggregate as in plinth protection including finishing cement concrete surfaces even and smooth without using extra cement complete all as specified and directed.(Using dimapur sand) |
| 29 | M&L for 25mm thick cement concrete type B-1 (1:2:4) using 20mm graded crushed stone aggregateasin floor, finishes even and rough to receive floor tiles complete all as specified and directed. |
| 30 | M&L for 75mm thick cement concrete type D-2 1:4:8 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 31 | M&L brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 32 | M & L for brick work with sub class ‘B’ brick, old size (locally available best quality) straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed. |
| 33 | M&L for rendering 15mm thick on other than fair faces of brick work in cement mortar (1:4) using water proofing compound @2% by weight of cement as per manufacture instruction and finishing the surface even and smooth without using extra cement complete all as specified and directed.(Using Dimapur Sand)[Note: WPC will be measured and paid separately) |
| 34 | Supply of Integral water proofing Compound ISI markedcomplete all as specified and directed.. |
| 35 | M & L for rendering 10mm thick in CM 1:6 on fair faces of brick work, finished even and smooth without using extra cement complete all as specified and directed.(using Dimapur Sand) |
| 36 | S&F Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile including 10mm thick cement mortar backingin CM (1:4) as backing coat to receive tiles complete all as specified and directed. |
| 37 | M&L for non skid coloured ceramic tiles 7 to 8mm thick jointless (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 38 | M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) area of eachtile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 39 | M&L forPVC coatedIvory plus Chequered cement concrete tiles with good gripas series size 30x30cmx1cm thick with grey cement and pigmentset, jointed and pointed in neat cement slurry in floorsover and including 15mm thick screed bed in CM 1:4complete all as specified and directed. |
| 40 | M&L for rendering 10mm thick on fair faces ofconcret work in CM 1:4, finished the surfaces rough to receive tiles etccomplete all as specified and directed. |
| 41 | M&L for 20mm thick granite (of any type) tiles machine cut in skirtin/dado laid over cement withscreed bed 20mm thick CM(1:4) and jointed with grey, cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and metered edgescomplete all as specified and directed. |
| 42 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slabincluding rubbing and polishing over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 43 | M&L for machine cut kota stone slab20-25mm thick in riser of steps,skirting,dado and pillarover and including 10mm thick cement mortar backing in cm (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishingcomplete all as specified and directed. |
| 44 | S&F flat iron for wind ties for roof including securing bolts complete all as specified and directed. |
| 45 | S&F Steel work in tubular trusses including special shaped washer etc. complete usingERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240.complete all as specified and as directed. |
| 46 | S & F Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections confirming to 410-w (Gde -E-250 quality) complete all as specified and directed. |
| 47 | M&L for structural steel work in Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410-W (Grade E-250) quality-A complete all as specified and as directed. |
| 48 | M&L for MS Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe- 290 (Gde E- 165) complete all as specified and directed. |
| 49 | M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coats of synthetic enamel paint over a coat of red oxide completeall as specified and directed by Engr-in- charge. |
| 50 | S&F rotational moulded polyethylene water storage tank, ISI marked,1000 litres capacity of multilayered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including all necessary inlet/outlet connections complete all as specified in SSR Part-I and as directed. |
| 51 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 52 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as ridge, roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 53 | S&F 0.56mm thick plain, aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing length and girth as fixed complete all as specified and directed. |
| 54 | S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screws and washers in roof, wall etc complete all as specified and directed. |
| 55 | S&F0.63 mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed. |
| 56 | All as per item no 53.00 here-in-above but except sheet with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 completeall as specified and directed by Engr-in- charge. |
| 57 | M & L for 4mm thick plywood (no of ply 03), grade BWR,type BB fixed with nails or screws to timber frame work complete all as specified and directed. |
| 58 | S&F Providing & fixing false ceiling at (a) (b) all heights with GRG (Glass FibreReinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture,design and patterns having content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS8225:1987, Noncombustible as per BS tiles tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of mainT runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-inCharge. |
| 59 | S&F in repairs 4 mm non asbestos fibre cement building boards fixed (605x605)mm or existing in ceiling or laid / inserted to timber /GI / Aluminium framework with screw complete all as specified and directed. |
| 60 | M & L for RCC 1:2:4 Type B1 nominal mix (using 20mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundationbeams; plinth beams; basesfor columns, etc.; basement slabs, under-reamed pilesand mass concrete complete all as specified and directed. |
| 61 | M&L for RCC (Nominal Mix) type B1 1:2:4 (20mm graded aggregate ) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified.(Sand :- Dimapur)Note:- Reinforcement and form work required shall be measured and paid seperately. |
| 62 | M&L for formwork to side of pillars, posts, struts, piers, columns and stanchions for square, rectangular fair finished surfaces complete all as specified and directed. |
| 63 | M&L formwork to sides and soffits of floor or roof beams and lintels, cantilevers, overhangs etc for flat and fair finished surfaces complete all as specified and directed. |
| 64 | S & Fmild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed. |
| 65 | Ditto as per items No 62.00 here-in-abovebut 5mm and over upto & incl 10mm dia in stirrups, spaces and binders complete all as specified and directed. |
| 66 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 67 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cms thick in soft/loose soil complete all as specified and as directed. |
| 68 | Removing excavated material/soil not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. |
| 69 | M & L for PCC 1:4:8 Type D2 (Nominal mix) (using 40mm graded stone aggregate), as in foundation, filling and mass concrete complete all as specified and as directed.(Note:- using dimapur sand) |
| 70 | M&L for second class hard wood in scantling clean sawn, timber framed & fixed complete all as specified and directed. |
| 71 | S&F 2nd class hard wood plain fillets, square, rectangular in section, sectional areaexe 13 sqcm & n. exe 25 sqcm clean sawn, secured with nails or bradscomplete all as specified and directed. |
| 72 | S&F factory made UPVC white colour Two track two panels sliding glazed window upto 1.50m height made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s anddrainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, including stainless steel wire mesh and 4mm to 5mm thick tintted glass complete all as specified and directed by Engineer-in-Charge.Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made complete all as specified and directed. |
| 73 | S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 74 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 75 | Supply and fixing factory made UPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made complete all as specified and directed. |
| 76 | M & L for 30 mm thick factory made flush door shutters solid core construction with block board core and ply wood face panels commercial type on both faces complete all as specified and directed |
| 77 | S&F 35mm thick 2nd class HW glazed skeleton shutters open rebated and preparedto receive glass gazed etc but divided into squares with plain chamfered or rounded mitred and rebated sash bar any numbers edges of framing plain chamfered or rounded fitted with cut and mittered beads for sceuring glass guage etc. size of members as specified in SSR pt-I section 8 clause 8.24(a) fitted to chowkhats complete all as specified and directed. |
| 78 | M&L for 18/19 mm thick block boards ,grade 2 quality ,interior grade ,commercial type with decorative face veneer on both face fixed with screw to timber frame work complete all as specified and directed. |
| 79 | M&L for 12 mm thick block boards ,grade 2 quality ,interior grade ,commercial type with decorative face veneer on both face fixed with screw to timber frame work complete all as specified and directed. |
| 80 | S&F for looking mirror of size 6 x 8 Feet with 6 mm thickness shape rectangle, glossy finish including fixing on wall complete all as specified and directed. |
| 81 | M&L for making holes drilled dia exc 12mm and n.exc 25mm, depth of holes exc 25mm but n.exc 40mm including holes for nails or screws, hand punched through granite stone complete all as specified and directed. |
| 82 | S&F 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed. |
| 83 | S&F 150mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed. |
| 84 | S&F extruded aluminum alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed. |
| 85 | S&F butt hinges, 125mm extruded aluminum alloy with galvanized mild steel hinges pin anodised and fixed type B-21 complete all as specified and directed. |
| 86 | S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and as directed. |
| 87 | S&F extruded aluminum alloy handles, fabricated type, anodised of size 125 mm complete all as specified and directed. |
| 88 | S&F floor door stoper of aluminium alloy body and tongue anodized with hard drawn steel spring with rubber shoe over all length as cover plate 150 mm complete as complete all as specified and directed. |
| 89 | S&F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 90 | S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 91 | S&F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 92 | M & L for Cutting chases, pinning in, making good to facings of brick walls where required and pointing in CM 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed water conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as speicified and directed. |
| 93 | M&L for fair cutting straight or raking cutting, n.exc 10cm width or girth on exposed surfaces of brickwork such as in splays, chamfers, etc including rubbed finish and waste complete all as specified and directed. |
| 94 | S&F vitreous china European type / pedestal type water closet \"P\" and \"S\" trap including PVC plastic sheet cover (commander) complete all as specified and directed. |
| 95 | S & F repairs Vitreous China Squatting pan, \"Orissa\" pattern, size 580 x 440 mm white with integral foot rests and 10 litres PVC capacity valve less, Syphonic action type, Flushing cistern, low level, white with inlet, ball valve, float and handle including brackets (SLIM LINE or equivalent) including PVC Flush pipe 32 mm dia., and setting the trap and pan in lime concrete 1:2:5 minimum 150 mm thick all round and finished just below level of rim of pan to receive the floor finishing complete all as specified and directed. |
| 96 | S&F in repair vitreous china wash basin white, flatback of size 450x300mm including32mm dia PVC waste pipeCP brass waste coupling 32 mmdia , pair of MS angle brackets or MS fastener/ bolts for fixing arrangements 450mm long pvc connection with PVC nut and washer complete all as specified and directed. |
| 97 | S&F in repairPVC low level flushing cistern, white, 10 ltrs capacity, valveless, syphonic action type including bracket and all fittings and flush pipe, PVC connection pipe 600mm long 15mm bore with brass heads and washers complete all as specified and directed. |
| 98 | S&F in repair PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore complete all as specified and directed. |
| 99 | S & F Angle stop valve of PTMT of any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and directed. |
| 100 | S & F in repair Angle stop valve of PTMT of any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and directed. |
| 101 | S & F in repair 15mm bore bib taps, cast copper alloy, chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferule complete all as specified and directed. |
| 102 | S&F in repair stop valves, ISI marked, 15 mm dia cast copper alloy, chromium plated, fancy type, with long shank and cup (concealed type) screwed down high pressure, screwed both ends for iron pipe or unions complete all as specified and directed. |
| 103 | S&F in repair 125mm sizechromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 104 | S&F in repair stop valve 20 mm dia cast copper alloy, secrewed down high pressure, with crutch or butterfly handle secrewed both ends for iron pipe and fixed complete all as specified and directed. |
| 105 | S&F stop valve 20 mm dia cast copper alloy, secrewed down high pressure, with crutch or butterfly handle secrewed both ends for iron pipe and fixed complete all as specified and directed. |
| 106 | S&F in repair pillar taps, ISI marked cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks for iron pipes for 15 mm bore dia ofpipe and fixed complete all as specified and directed. |
| 107 | S&F pillar taps, ISI marked cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks for iron pipes for 15 mm bore dia ofpipe and fixed complete all as specified and directed. |
| 108 | S&F in repair600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 109 | S&F in repair Glass shelf assembly fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 110 | S&F in repair 20 mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210 g m s) complete all as specified and directed |
| 111 | S&F 20 mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210 g m s) complete all as specified and directed |
| 112 | S&Fbrass chromium plated, 600mm long between flanges tubular towel rail , 20mm dia, D type. fixed with and including chromium plated brass screws and wooden plastic cleats,complete all as specified and directed. |
| 113 | S&F in repairbrass chromium plated, 600mm long between flanges tubular towel rail , 20mm dia, D type. fixed with and including chromium plated brass screws and wooden plastic cleats,complete all as specified and directed. |
| 114 | S&F 2nd class hardwood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 115 | S&F in repair PVC SWR pipes 110 mm bore single socketed in any length with rubber ring joint fixed to wall or laid in trenches or in floors with steel clampscomplete all as specified and directed. |
| 116 | S&F in repair PVC SWR pipes 75 mm bore single socketed in any length with rubber ring joint fixed to wall or laid in trenches or in floors with steel clamps complete all as specified and directed. |
| 117 | S&F 110mm borePVC (SWR) bends complete all as specified and directed. |
| 118 | S&F 75mm borePVC (SWR) bends complete all as specified and directed. |
| 119 | S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia with access door complete all as specified and directed. |
| 120 | S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm dia with access door complete all as specified and directed. |
| 121 | S&F 75mm dia PVC (SWR) floor trap, plain with grating including setting and jointing with solvent cement completeall as specified and directed. |
| 122 | S&F PVC (SWR) reducerof 110 mm dia complete all as specified and directed. |
| 123 | M&L forPVC (SWR) vent cowl of bore 75mm complete all as specified and directed. |
| 124 | S&F PVC (SWR) WC connector with lip ring 110 mm. complete all as specified and directed. |
| 125 | S&F PVC (SWR) P trap of 110 mm bore complete all as specified and directed. |
| 126 | S&F in repair stainless steel sink with drainage board 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm. (Make: Blue Star Model No BSSBSD-52 or equivalent in Jain Brothers / Prayag/ Cera) |
| 127 | M & L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for internal dia of pipe 150mm complete all as specified and directed. |
| 128 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 129 | M & L for preparation newly plastered wall surfaces and applying two coats of oil bound distemper over a one coat of primer with 3mm thick birla wall puttycomplete all as specified and directed. |
| 130 | M&L for preparation of old treated surface of wall by washing rubbing down & applying two coat of Oil bounddistempercomplete all as specified and directed. |
| 131 | M&L forpreparation of new or previously untreated surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applyingtwo coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 132 | M&L for preparation of old concrete floor lite and stone surfaces and making a smooth surfaces and applying two coat of floor coat Emulsion platanium series paint weather proof over a coat ofwater thinable cement primer complete all as specified and directed. Note :- (1)Make :-INDIGO , DR FIXED and EQUIVALENT . |
| 133 | S&F glass 3mm thick ordinary quality and glazing with oil putty in square n. exe.0.50 sqm in each pane including hacking out old broken glass sheet complete all as specified and directed. |
| 134 | Supply only 4mm thick ordinary quality frosted/obscure glass fixed to upvc window/ ventilator complete all as specified and directed. |
| 135 | S&Fstainless steel work ofgrade S S 304 in framed work such as grills, gratings,framed guard bars, hellow/ solid,square or different section, flats ,ss plain sheet and including with two-way spider, SS fasteners of dia not less than 12mm etc., with ends of bars shouldered and/ or riveted, or forged into spikes, s s plate , s s beading with one or more rebates includingjointing cleat, welding, grinding, buffing, polishing and making curvature ( wherever required) and fitting the same for payment purpose only weight of stainless steel members shall be considered. Necessary nutbolts and other accessaries shall be deemed to be inclusive in the quoted rate Note complete all as specified and directed. Note : No extra payment shall be made. . |
| 136 | S&F for stainless steel work ofgrade S S 304 in capital letter or figures (block, Roman, Italic or Indian) not exceeding 30cm height including fixing to stone,jointing cleat, grinding, buffing, polishing and making curvature ( wherever required) and fixing the same for payment purpose only weight of stainless steel letter or members shall be considered. Necessary nutbolts and other accessaries shall be deemed to be inclusive in the quoted rate complete all as specified and directed. Note : No extra payment shall be made. . |
| 137 | S&F for 2.5 mm dia steel wirePVC coated anti rust dark blue clour steel wire flexible type plastic coated wire for out door/ in doorlaundry washing cloth fixed to steel galvanizedpipes , RCC post ,and wall etc completeall as specified and directed by Engr-in- charge. |
| 138 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, andgetting out in soft/loose soil complete all as specified and directed. |
| 139 | S&F Mild steel compound girders and stanchions, lattice girders, aerialmasts, staging for water tanks and the like including caps, bases,splices etc. built up from two or more beam or channel sections or angleswith plates, including all lattice bars, stiffeners, gusset plates, etc conforming to Fe.290.Gde-E-165complete all as specified and directed. |
| 140 | S&F inGun-metal (ISI marked), globe or gate valves, with iron wheel head, screwed both ends for iron pipe15mm bore and fixed complete all as specified and directed. |
| 141 | S&F inGun-metal (ISI marked), globe or gate valves, with iron wheel head, screwed both ends for iron pipe20mm bore and fixed complete all as specified and directed. |
| 142 | S & F 15mm bore bib taps, cast copper alloy, chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferule complete all as specified and directed. |
| 143 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of whitewash complete all as specified and directed. |
| 144 | M&L for 100mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base of hardstanding complete all as specified and directed. |
| 145 | M&L hardcore of gaugen exc 63mm, broken stone or bouldersdeposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface completed all as specified and directed. |
| 146 | M & L for Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 147 | M&L for rendering 15mm thick in cement mortar on fair faces of brick or concrete surfaces in two layers i.e. Ist layer of 10 mm thick rendering in cement mortar (1:6 ) and 2nd ( top ) layer of 5 mm thick rendering in cement mortar (1:4 )mixed with integral water proofing compound as per manufacturer\"s instructions with second layer, finished even and smooth without using extra cement complete all as specified and as directed. (Using Dimapur Sand)[Note: WPC will be measured and paid separately) |
| 148 | M&L for preparation of surfaces plastered or unplastered new surface and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and directed |
| 149 | M&L for preparation for new or previously untreated plastered surface of walls and applying two coats of cement base paint over one coat of primer complete all as specified and directed. |
| 150 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat, rough finished surface of concrete complete all as specified and directed. |
| 151 | S&F 150mm long alumiunium handles cast type anodised complete all as specified and directed. |
| 152 | M&L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade \"A\" complete all as specified and directed. |
| 153 | M&L for Vitreous chinaurinal half stall type, white with grating and union for discharge pipeincl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement ; fixing automatic flushing cistern with brackets, flush pipe, waste pipe, grating and union for discharge pipe complete all as specified and directed. |
| 154 | S&F invitreous china sqatting pan \"orissa pattern size 580x440mm white with integral foot rest including lime concrete bedding & 10 Ltrs capacity PVC valveless syphnic action type flushing cistern low level white with inlet ball valve float and handle including brackets & PVC waste pipe 32 mm dia & connection complete all as specified and directed. |
| 155 | S&F rotational moulded polyethylene water storage tank, ISI marked,500 litres capacity of multilayered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including all necessary inlet/outlet connections complete all as specified in SSR Part-I and as directed. |
| 156 | S&F PVC (SWR) couplers for 110mm bore pipe complete all as specified and directed. |
| 157 | S&F PVC (SWR) couplers for 75mm bore pipe complete all as specified and directed. |
| 158 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 159 | S & F inVitreous china wash basin,white flat back,size 630X450 mm including brackets PVC waste pipe 32 mm dia , 32 mm dia waste coupling PTMT (half or full threaded ) ,fibre reinforced PVC connection 45 cm long with PTMT nuts at both end complete all as specified and directed. |
| 160 | S&FSoap dish, CP, white, approximate size 160x160x90mm Soap dish, any type, fixed to plugs with chromium platedbrass screws complete all as specified and directed. |
| 161 | Taking down carefully unserviceable aluminum/ copper point wiring (light/ fan/ socket/ power) complete including fixture & fitting such as switches, sockets, ceiling roses regulators, lamp holder etc. but excluding light fittings & fixture and exhaust fans etc removing and making good disturbed surfaces of wall/ceiling etc completeall as specified and directed. |
| 162 | Material and labour for point wiring surface type with two single core 1.5 Sq mm (nominal area) FRLS PVC insulated and unsheathed, multi-stranded, copper conductor cable in and including suitable size PVC casing capping with all fittings and fixing accessories and suitable size PVC box for mounting switches, regulator etc includingmulti-strand PVC insulated unsheathed stranded copper cable as earth continuity conductor of size 1.5 Sq mm and connecting to light fitting/fans etc completeall as specified and directed for following :- (Colour code to be followed)One light point controlled by one, one way switch |
| 163 | One ceiling/exhaust fan point controlled by one, one way switch |
| 164 | One socket outlet 5 Amps 5 pin on independent board |
| 165 | One socket outlet 5 Amps 5 pin on same board with other switches |
| 166 | All as per item No. 08 here in before but with cable size 2.5 Sqmm and earth continuity conductor of 2.5 Sqmm size for one 5 pin 15 Amps socket out let on independent board complete all as specified and directed. |
| 167 | S&Fmodular switch piano, 6 Amps, single pole, one way complete all as specified and directed. |
| 168 | S&F modularsocket outlet 2/3 Pin 6 Amps combined 2 module complete all as specified and directed. |
| 169 | Supply and fixing modular Switch Socket multipurpose 3 pin 16 Amps and 3 pin 6 Amps combined 2 module. |
| 170 | S&F Ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and directed. |
| 171 | S&Fmodular switch piano, 16 Amps, single pole, one way complete all as specified and directed. |
| 172 | S&F modular white cover plate with frame for fixing of 6 module complete all as specified and directed. |
| 173 | S&F modular white cover plate with frame for fixing of 3 module complete all as specified and directed. |
| 174 | S&F modular white cover plate with frame for fixing of 2 module complete all as specified and directed. |
| 175 | S&F blank spacer plate for single module complete all as specified and directed. |
| 176 | Taking downold unserviceable main switch/ DBs/ MCB DBs with MCB including making good the disturbed surface complete as directed. |
| 177 | S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 8 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door verticle for breaking capacity 10 KA complete all as specified and directed. |
| 178 | S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 4 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door verticle for breaking capacity 10 KA complete all as specified and directed. |
| 179 | S&F MCB single pole and neutral 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed. |
| 180 | S&F MCB single pole 06 to 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed. |
| 181 | S&F in repair PVC Board (30 x 25 x 5) cm depth medium quality ISI markedcomplete all as specified and directed. |
| 182 | S&F PVC Board (30 x 25 x 5) cm depth medium quality ISI markedcomplete all as specified and directed. |
| 183 | Taking down / dismantling old unserviceable LED tube light fittingscomplete all as specified and directed. |
| 184 | S & F LED light fitting 1x20 Watt , 220 V , AC decorative box type with driver , holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 185 | S & F of 1100 volts grade heavy duty cabled PVC insulated aluminium conductor served with inner sheating of PVC tape and over all PVC sheathed in service connection suspended by insulating hangers not more than one meter apart including 4 mm suspensionwire one twin core cable 2 core flat of 10 sqmm size complete all as specified and directed. |
| 186 | Taking down ceiling/exhaust fan including dismantling all necessary electrical connections to facilitate repairs to ceiling/wall complete all as directed. |
| 187 | Re-fixing only ceiling fan (M D Supply) /and connecting up ceiling rose or connecting to fan complete all as specified and directed. |
| 188 | Refixing only exhaust fan (M.D Supply) /and connecting up ceiling rose or connecting to fan and making a whole cutting on the wall for fixing exhaust fan complete all as specified and directed. |
| 189 | Taking down Geyser and kept in safe custody for refixing to its original position including provision of all necessary nuts, bolts, washers complete all as specified and directed |
| 190 | Refixing Geyser received form item No 188.00 here in before and connecting up including all necessary nuts, bolts, fastners and washersetc complete all as specified and directed |
| 191 | S&F modular electronic fan regulator rotary stepped type 120W, 240V, single phase, two module and connecting up complete all as specified and directed. |
| 192 | S&F building security light fitting new generation energy saving & environmental friendly long life versatile pressure die cast aluminium housing with acrylic cover as diffuser with IP-66 high power LED light 35 watt including suitable size of wall bracket and connecting complete all as specified and directed. |
| 193 | Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized earth wire 4mm dia by means of galvanized iron or steel bolts nuts check nuts and washers and other end connected with earthing testing point including providing suitable testing points as directed including funnel, watering pipe of 20mm bore, light grade galvanized iron pipe, wire mesh charcoal of coal dust and common salt in alternative layer all around the earth electrode compacted thickness 15cm with concrete pit in PCC 1:3:6 type C1 50mm thick pre cast RCC 1:2:4 type B1 cover slab set in CM (1:4) re-enforcement with 8mm dia deformed bars @ 15cm C/C and suitable handle of 10mm dia MS round bars, including earth work in hard/dense soil as required complete all as shown in electrical plate No 3 of MES Schedule Part I and testing on completion all as specified and as directed.(Note: Earth strip beyond 7.5 m length will be measured & paid separately) |
| 194 | Supply and laying25 mm dia bore steel water tubing GI medium grade ISI marked with all fittings laid in trenches or fixed to wall etc complete all as specified and directed. |
| 195 | S&F inGun-metal (ISI marked), globe or gate valves, with iron wheel head, screwed both ends for iron pipe25mm bore and fixed complete all as specified and directed. |
| 196 | M&L for drilling and tapping cast iron / ductlile iron water mains (in position) for branch connections of the internal dia 15mm complete all as specified and directed. |
| 197 | S & F exhaust fan , steel body AC single phase , 230 V of size 300 mm sweep with blades and frame and louvers complete all as specified and directed |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
